@@ -6645,6 +6645,15 @@ W: http://www.mellanox.com
Q: http://patchwork.ozlabs.org/project/netdev/list/
F: drivers/net/ethernet/mellanox/mlx4/en_*
+MELLANOX ETHERNET SWITCH DRIVERS
+M: Jiri Pirko <jiri@mellanox.com>
+M: Ido Schimmel <idosch@mellanox.com>
+L: netdev@vger.kernel.org
+S: Supported
+W: http://www.mellanox.com
+Q: http://patchwork.ozlabs.org/project/netdev/list/
+F: drivers/net/ethernet/mellanox/mlxsw/
+
MEMORY MANAGEMENT
L: linux-mm@kvack.org
W: http://www.linux-mm.org
@@ -18,5 +18,6 @@ if NET_VENDOR_MELLANOX
source "drivers/net/ethernet/mellanox/mlx4/Kconfig"
source "drivers/net/ethernet/mellanox/mlx5/core/Kconfig"
+source "drivers/net/ethernet/mellanox/mlxsw/Kconfig"
endif # NET_VENDOR_MELLANOX
@@ -4,3 +4,4 @@
obj-$(CONFIG_MLX4_CORE) += mlx4/
obj-$(CONFIG_MLX5_CORE) += mlx5/core/
+obj-$(CONFIG_MLXSW_CORE) += mlxsw/
new file mode 100644
@@ -0,0 +1,11 @@
+#
+# Mellanox switch drivers configuration
+#
+
+config MLXSW_CORE
+ tristate "Mellanox Technologies Switch ASICs support"
+ ---help---
+ This driver supports Mellanox Technologies Switch ASICs family.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mlxsw_core.
new file mode 100644
@@ -0,0 +1,2 @@
+obj-$(CONFIG_MLXSW_CORE) += mlxsw_core.o
+mlxsw_core-objs := core.o
new file mode 100644
@@ -0,0 +1,1090 @@
+/*
+ * drivers/net/ethernet/mellanox/mlxsw/cmd.h
+ * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
+ * Copyright (c) 2015 Ido Schimmel <idosch@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MLXSW_CMD_H
+#define _MLXSW_CMD_H
+
+#include "item.h"
+
+#define MLXSW_CMD_MBOX_SIZE 4096
+
+static inline char *mlxsw_cmd_mbox_alloc(void)
+{
+ return kzalloc(MLXSW_CMD_MBOX_SIZE, GFP_KERNEL);
+}
+
+static inline void mlxsw_cmd_mbox_free(char *mbox)
+{
+ kfree(mbox);
+}
+
+static inline void mlxsw_cmd_mbox_zero(char *mbox)
+{
+ memset(mbox, 0, MLXSW_CMD_MBOX_SIZE);
+}
+
+struct mlxsw_core;
+
+int mlxsw_cmd_exec(struct mlxsw_core *mlxsw_core, u16 opcode, u8 opcode_mod,
+ u32 in_mod, bool out_mbox_direct,
+ char *in_mbox, size_t in_mbox_size,
+ char *out_mbox, size_t out_mbox_size);
+
+static inline int mlxsw_cmd_exec_in(struct mlxsw_core *mlxsw_core, u16 opcode,
+ u8 opcode_mod, u32 in_mod, char *in_mbox,
+ size_t in_mbox_size)
+{
+ return mlxsw_cmd_exec(mlxsw_core, opcode, opcode_mod, in_mod, false,
+ in_mbox, in_mbox_size, NULL, 0);
+}
+
+static inline int mlxsw_cmd_exec_out(struct mlxsw_core *mlxsw_core, u16 opcode,
+ u8 opcode_mod, u32 in_mod,
+ bool out_mbox_direct,
+ char *out_mbox, size_t out_mbox_size)
+{
+ return mlxsw_cmd_exec(mlxsw_core, opcode, opcode_mod, in_mod,
+ out_mbox_direct, NULL, 0,
+ out_mbox, out_mbox_size);
+}
+
+static inline int mlxsw_cmd_exec_none(struct mlxsw_core *mlxsw_core, u16 opcode,
+ u8 opcode_mod, u32 in_mod)
+{
+ return mlxsw_cmd_exec(mlxsw_core, opcode, opcode_mod, in_mod, false,
+ NULL, 0, NULL, 0);
+}
+
+enum mlxsw_cmd_opcode {
+ MLXSW_CMD_OPCODE_QUERY_FW = 0x004,
+ MLXSW_CMD_OPCODE_QUERY_BOARDINFO = 0x006,
+ MLXSW_CMD_OPCODE_QUERY_AQ_CAP = 0x003,
+ MLXSW_CMD_OPCODE_MAP_FA = 0xFFF,
+ MLXSW_CMD_OPCODE_UNMAP_FA = 0xFFE,
+ MLXSW_CMD_OPCODE_CONFIG_PROFILE = 0x100,
+ MLXSW_CMD_OPCODE_ACCESS_REG = 0x040,
+ MLXSW_CMD_OPCODE_SW2HW_DQ = 0x201,
+ MLXSW_CMD_OPCODE_HW2SW_DQ = 0x202,
+ MLXSW_CMD_OPCODE_2ERR_DQ = 0x01E,
+ MLXSW_CMD_OPCODE_QUERY_DQ = 0x022,
+ MLXSW_CMD_OPCODE_SW2HW_CQ = 0x016,
+ MLXSW_CMD_OPCODE_HW2SW_CQ = 0x017,
+ MLXSW_CMD_OPCODE_QUERY_CQ = 0x018,
+ MLXSW_CMD_OPCODE_SW2HW_EQ = 0x013,
+ MLXSW_CMD_OPCODE_HW2SW_EQ = 0x014,
+ MLXSW_CMD_OPCODE_QUERY_EQ = 0x015,
+};
+
+static inline const char *mlxsw_cmd_opcode_str(u16 opcode)
+{
+ switch (opcode) {
+ case MLXSW_CMD_OPCODE_QUERY_FW:
+ return "QUERY_FW";
+ case MLXSW_CMD_OPCODE_QUERY_BOARDINFO:
+ return "QUERY_BOARDINFO";
+ case MLXSW_CMD_OPCODE_QUERY_AQ_CAP:
+ return "QUERY_AQ_CAP";
+ case MLXSW_CMD_OPCODE_MAP_FA:
+ return "MAP_FA";
+ case MLXSW_CMD_OPCODE_UNMAP_FA:
+ return "UNMAP_FA";
+ case MLXSW_CMD_OPCODE_CONFIG_PROFILE:
+ return "CONFIG_PROFILE";
+ case MLXSW_CMD_OPCODE_ACCESS_REG:
+ return "ACCESS_REG";
+ case MLXSW_CMD_OPCODE_SW2HW_DQ:
+ return "SW2HW_DQ";
+ case MLXSW_CMD_OPCODE_HW2SW_DQ:
+ return "HW2SW_DQ";
+ case MLXSW_CMD_OPCODE_2ERR_DQ:
+ return "2ERR_DQ";
+ case MLXSW_CMD_OPCODE_QUERY_DQ:
+ return "QUERY_DQ";
+ case MLXSW_CMD_OPCODE_SW2HW_CQ:
+ return "SW2HW_CQ";
+ case MLXSW_CMD_OPCODE_HW2SW_CQ:
+ return "HW2SW_CQ";
+ case MLXSW_CMD_OPCODE_QUERY_CQ:
+ return "QUERY_CQ";
+ case MLXSW_CMD_OPCODE_SW2HW_EQ:
+ return "SW2HW_EQ";
+ case MLXSW_CMD_OPCODE_HW2SW_EQ:
+ return "HW2SW_EQ";
+ case MLXSW_CMD_OPCODE_QUERY_EQ:
+ return "QUERY_EQ";
+ default:
+ return "*UNKNOWN*";
+ }
+}
+
+enum mlxsw_cmd_status {
+ /* Command execution succeeded. */
+ MLXSW_CMD_STATUS_OK = 0x00,
+ /* Internal error (e.g. bus error) occurred while processing command. */
+ MLXSW_CMD_STATUS_INTERNAL_ERR = 0x01,
+ /* Operation/command not supported or opcode modifier not supported. */
+ MLXSW_CMD_STATUS_BAD_OP = 0x02,
+ /* Parameter not supported, parameter out of range. */
+ MLXSW_CMD_STATUS_BAD_PARAM = 0x03,
+ /* System was not enabled or bad system state. */
+ MLXSW_CMD_STATUS_BAD_SYS_STATE = 0x04,
+ /* Attempt to access reserved or unallocated resource, or resource in
+ * inappropriate ownership.
+ */
+ MLXSW_CMD_STATUS_BAD_RESOURCE = 0x05,
+ /* Requested resource is currently executing a command. */
+ MLXSW_CMD_STATUS_RESOURCE_BUSY = 0x06,
+ /* Required capability exceeds device limits. */
+ MLXSW_CMD_STATUS_EXCEED_LIM = 0x08,
+ /* Resource is not in the appropriate state or ownership. */
+ MLXSW_CMD_STATUS_BAD_RES_STATE = 0x09,
+ /* Index out of range (might be beyond table size or attempt to
+ * access a reserved resource).
+ */
+ MLXSW_CMD_STATUS_BAD_INDEX = 0x0A,
+ /* NVMEM checksum/CRC failed. */
+ MLXSW_CMD_STATUS_BAD_NVMEM = 0x0B,
+ /* Bad management packet (silently discarded). */
+ MLXSW_CMD_STATUS_BAD_PKT = 0x30,
+};
+
+static inline const char *mlxsw_cmd_status_str(u8 status)
+{
+ switch (status) {
+ case MLXSW_CMD_STATUS_OK:
+ return "OK";
+ case MLXSW_CMD_STATUS_INTERNAL_ERR:
+ return "INTERNAL_ERR";
+ case MLXSW_CMD_STATUS_BAD_OP:
+ return "BAD_OP";
+ case MLXSW_CMD_STATUS_BAD_PARAM:
+ return "BAD_PARAM";
+ case MLXSW_CMD_STATUS_BAD_SYS_STATE:
+ return "BAD_SYS_STATE";
+ case MLXSW_CMD_STATUS_BAD_RESOURCE:
+ return "BAD_RESOURCE";
+ case MLXSW_CMD_STATUS_RESOURCE_BUSY:
+ return "RESOURCE_BUSY";
+ case MLXSW_CMD_STATUS_EXCEED_LIM:
+ return "EXCEED_LIM";
+ case MLXSW_CMD_STATUS_BAD_RES_STATE:
+ return "BAD_RES_STATE";
+ case MLXSW_CMD_STATUS_BAD_INDEX:
+ return "BAD_INDEX";
+ case MLXSW_CMD_STATUS_BAD_NVMEM:
+ return "BAD_NVMEM";
+ case MLXSW_CMD_STATUS_BAD_PKT:
+ return "BAD_PKT";
+ default:
+ return "*UNKNOWN*";
+ }
+}
+
+/* QUERY_FW - Query Firmware
+ * -------------------------
+ * OpMod == 0, INMmod == 0
+ * -----------------------
+ * The QUERY_FW command retrieves information related to firmware, command
+ * interface version and the amount of resources that should be allocated to
+ * the firmware.
+ */
+
+static inline int mlxsw_cmd_query_fw(struct mlxsw_core *mlxsw_core,
+ char *out_mbox)
+{
+ return mlxsw_cmd_exec_out(mlxsw_core, MLXSW_CMD_OPCODE_QUERY_FW,
+ 0, 0, false, out_mbox, MLXSW_CMD_MBOX_SIZE);
+}
+
+/* cmd_mbox_query_fw_fw_pages
+ * Amount of physical memory to be allocatedfor firmware usage in 4KB pages.
+ */
+MLXSW_ITEM32(cmd_mbox, query_fw, fw_pages, 0x00, 16, 16);
+
+/* cmd_mbox_query_fw_fw_rev_major
+ * Firmware Revision - Major
+ */
+MLXSW_ITEM32(cmd_mbox, query_fw, fw_rev_major, 0x00, 0, 16);
+
+/* cmd_mbox_query_fw_fw_rev_subminor
+ * Firmware Sub-minor version (Patch level)
+ */
+MLXSW_ITEM32(cmd_mbox, query_fw, fw_rev_subminor, 0x04, 16, 16);
+
+/* cmd_mbox_query_fw_fw_rev_minor
+ * Firmware Revision - Minor
+ */
+MLXSW_ITEM32(cmd_mbox, query_fw, fw_rev_minor, 0x04, 0, 16);
+
+/* cmd_mbox_query_fw_core_clk
+ * Internal Clock Frequency (in MHz)
+ */
+MLXSW_ITEM32(cmd_mbox, query_fw, core_clk, 0x08, 16, 16);
+
+/* cmd_mbox_query_fw_cmd_interface_rev
+ * Command Interface Interpreter Revision ID. This number is bumped up
+ * every time a non-backward-compatible change is done for the command
+ * interface. The current cmd_interface_rev is 1.
+ */
+MLXSW_ITEM32(cmd_mbox, query_fw, cmd_interface_rev, 0x08, 0, 16);
+
+/* cmd_mbox_query_fw_dt
+ * If set, Debug Trace is supported
+ */
+MLXSW_ITEM32(cmd_mbox, query_fw, dt, 0x0C, 31, 1);
+
+/* cmd_mbox_query_fw_api_version
+ * Indicates the version of the API, to enable software querying
+ * for compatibility. The current api_version is 1.
+ */
+MLXSW_ITEM32(cmd_mbox, query_fw, api_version, 0x0C, 0, 16);
+
+/* cmd_mbox_query_fw_fw_hour
+ * Firmware timestamp - hour
+ */
+MLXSW_ITEM32(cmd_mbox, query_fw, fw_hour, 0x10, 24, 8);
+
+/* cmd_mbox_query_fw_fw_minutes
+ * Firmware timestamp - minutes
+ */
+MLXSW_ITEM32(cmd_mbox, query_fw, fw_minutes, 0x10, 16, 8);
+
+/* cmd_mbox_query_fw_fw_seconds
+ * Firmware timestamp - seconds
+ */
+MLXSW_ITEM32(cmd_mbox, query_fw, fw_seconds, 0x10, 8, 8);
+
+/* cmd_mbox_query_fw_fw_year
+ * Firmware timestamp - year
+ */
+MLXSW_ITEM32(cmd_mbox, query_fw, fw_year, 0x14, 16, 16);
+
+/* cmd_mbox_query_fw_fw_month
+ * Firmware timestamp - month
+ */
+MLXSW_ITEM32(cmd_mbox, query_fw, fw_month, 0x14, 8, 8);
+
+/* cmd_mbox_query_fw_fw_day
+ * Firmware timestamp - day
+ */
+MLXSW_ITEM32(cmd_mbox, query_fw, fw_day, 0x14, 0, 8);
+
+/* cmd_mbox_query_fw_clr_int_base_offset
+ * Clear Interrupt register's offset from clr_int_bar register
+ * in PCI address space.
+ */
+MLXSW_ITEM64(cmd_mbox, query_fw, clr_int_base_offset, 0x20, 0, 64);
+
+/* cmd_mbox_query_fw_clr_int_bar
+ * PCI base address register (BAR) where clr_int register is located.
+ * 00 - BAR 0-1 (64 bit BAR)
+ */
+MLXSW_ITEM32(cmd_mbox, query_fw, clr_int_bar, 0x28, 30, 2);
+
+/* cmd_mbox_query_fw_error_buf_offset
+ * Read Only buffer for internal error reports of offset
+ * from error_buf_bar register in PCI address space).
+ */
+MLXSW_ITEM64(cmd_mbox, query_fw, error_buf_offset, 0x30, 0, 64);
+
+/* cmd_mbox_query_fw_error_buf_size
+ * Internal error buffer size in DWORDs
+ */
+MLXSW_ITEM32(cmd_mbox, query_fw, error_buf_size, 0x38, 0, 32);
+
+/* cmd_mbox_query_fw_error_int_bar
+ * PCI base address register (BAR) where error buffer
+ * register is located.
+ * 00 - BAR 0-1 (64 bit BAR)
+ */
+MLXSW_ITEM32(cmd_mbox, query_fw, error_int_bar, 0x3C, 30, 2);
+
+/* cmd_mbox_query_fw_doorbell_page_offset
+ * Offset of the doorbell page
+ */
+MLXSW_ITEM64(cmd_mbox, query_fw, doorbell_page_offset, 0x40, 0, 64);
+
+/* cmd_mbox_query_fw_doorbell_page_bar
+ * PCI base address register (BAR) of the doorbell page
+ * 00 - BAR 0-1 (64 bit BAR)
+ */
+MLXSW_ITEM32(cmd_mbox, query_fw, doorbell_page_bar, 0x48, 30, 2);
+
+/* QUERY_BOARDINFO - Query Board Information
+ * -----------------------------------------
+ * OpMod == 0 (N/A), INMmod == 0 (N/A)
+ * -----------------------------------
+ * The QUERY_BOARDINFO command retrieves adapter specific parameters.
+ */
+
+static inline int mlxsw_cmd_boardinfo(struct mlxsw_core *mlxsw_core,
+ char *out_mbox)
+{
+ return mlxsw_cmd_exec_out(mlxsw_core, MLXSW_CMD_OPCODE_QUERY_BOARDINFO,
+ 0, 0, false, out_mbox, MLXSW_CMD_MBOX_SIZE);
+}
+
+/* cmd_mbox_boardinfo_intapin
+ * When PCIe interrupt messages are being used, this value is used for clearing
+ * an interrupt. When using MSI-X, this register is not used.
+ */
+MLXSW_ITEM32(cmd_mbox, boardinfo, intapin, 0x10, 24, 8);
+
+/* cmd_mbox_boardinfo_vsd_vendor_id
+ * PCISIG Vendor ID (www.pcisig.com/membership/vid_search) of the vendor
+ * specifying/formatting the VSD. The vsd_vendor_id identifies the management
+ * domain of the VSD/PSID data. Different vendors may choose different VSD/PSID
+ * format and encoding as long as they use their assigned vsd_vendor_id.
+ */
+MLXSW_ITEM32(cmd_mbox, boardinfo, vsd_vendor_id, 0x1C, 0, 16);
+
+/* cmd_mbox_boardinfo_vsd
+ * Vendor Specific Data. The VSD string that is burnt to the Flash
+ * with the firmware.
+ */
+#define MLXSW_CMD_BOARDINFO_VSD_LEN 208
+MLXSW_ITEM_BUF(cmd_mbox, boardinfo, vsd, 0x20, MLXSW_CMD_BOARDINFO_VSD_LEN);
+
+/* cmd_mbox_boardinfo_psid
+ * The PSID field is a 16-ascii (byte) character string which acts as
+ * the board ID. The PSID format is used in conjunction with
+ * Mellanox vsd_vendor_id (15B3h).
+ */
+#define MLXSW_CMD_BOARDINFO_PSID_LEN 16
+MLXSW_ITEM_BUF(cmd_mbox, boardinfo, psid, 0xF0, MLXSW_CMD_BOARDINFO_PSID_LEN);
+
+/* QUERY_AQ_CAP - Query Asynchronous Queues Capabilities
+ * -----------------------------------------------------
+ * OpMod == 0 (N/A), INMmod == 0 (N/A)
+ * -----------------------------------
+ * The QUERY_AQ_CAP command returns the device asynchronous queues
+ * capabilities supported.
+ */
+
+static inline int mlxsw_cmd_query_aq_cap(struct mlxsw_core *mlxsw_core,
+ char *out_mbox)
+{
+ return mlxsw_cmd_exec_out(mlxsw_core, MLXSW_CMD_OPCODE_QUERY_AQ_CAP,
+ 0, 0, false, out_mbox, MLXSW_CMD_MBOX_SIZE);
+}
+
+/* cmd_mbox_query_aq_cap_log_max_sdq_sz
+ * Log (base 2) of max WQEs allowed on SDQ.
+ */
+MLXSW_ITEM32(cmd_mbox, query_aq_cap, log_max_sdq_sz, 0x00, 24, 8);
+
+/* cmd_mbox_query_aq_cap_max_num_sdqs
+ * Maximum number of SDQs.
+ */
+MLXSW_ITEM32(cmd_mbox, query_aq_cap, max_num_sdqs, 0x00, 0, 8);
+
+/* cmd_mbox_query_aq_cap_log_max_rdq_sz
+ * Log (base 2) of max WQEs allowed on RDQ.
+ */
+MLXSW_ITEM32(cmd_mbox, query_aq_cap, log_max_rdq_sz, 0x04, 24, 8);
+
+/* cmd_mbox_query_aq_cap_max_num_rdqs
+ * Maximum number of RDQs.
+ */
+MLXSW_ITEM32(cmd_mbox, query_aq_cap, max_num_rdqs, 0x04, 0, 8);
+
+/* cmd_mbox_query_aq_cap_log_max_cq_sz
+ * Log (base 2) of max CQEs allowed on CQ.
+ */
+MLXSW_ITEM32(cmd_mbox, query_aq_cap, log_max_cq_sz, 0x08, 24, 8);
+
+/* cmd_mbox_query_aq_cap_max_num_cqs
+ * Maximum number of CQs.
+ */
+MLXSW_ITEM32(cmd_mbox, query_aq_cap, max_num_cqs, 0x08, 0, 8);
+
+/* cmd_mbox_query_aq_cap_log_max_eq_sz
+ * Log (base 2) of max EQEs allowed on EQ.
+ */
+MLXSW_ITEM32(cmd_mbox, query_aq_cap, log_max_eq_sz, 0x0C, 24, 8);
+
+/* cmd_mbox_query_aq_cap_max_num_eqs
+ * Maximum number of EQs.
+ */
+MLXSW_ITEM32(cmd_mbox, query_aq_cap, max_num_eqs, 0x0C, 0, 8);
+
+/* cmd_mbox_query_aq_cap_max_sg_sq
+ * The maximum S/G list elements in an DSQ. DSQ must not contain
+ * more S/G entries than indicated here.
+ */
+MLXSW_ITEM32(cmd_mbox, query_aq_cap, max_sg_sq, 0x10, 8, 8);
+
+/* cmd_mbox_query_aq_cap_
+ * The maximum S/G list elements in an DRQ. DRQ must not contain
+ * more S/G entries than indicated here.
+ */
+MLXSW_ITEM32(cmd_mbox, query_aq_cap, max_sg_rq, 0x10, 0, 8);
+
+/* MAP_FA - Map Firmware Area
+ * --------------------------
+ * OpMod == 0 (N/A), INMmod == Number of VPM entries
+ * -------------------------------------------------
+ * The MAP_FA command passes physical pages to the switch. These pages
+ * are used to store the device firmware. MAP_FA can be executed multiple
+ * times until all the firmware area is mapped (the size that should be
+ * mapped is retrieved through the QUERY_FW command). All required pages
+ * must be mapped to finish the initialization phase. Physical memory
+ * passed in this command must be pinned.
+ */
+
+static inline int mlxsw_cmd_map_fa(struct mlxsw_core *mlxsw_core,
+ char *in_mbox, u32 vpm_entries_count)
+{
+ return mlxsw_cmd_exec_in(mlxsw_core, MLXSW_CMD_OPCODE_MAP_FA,
+ 0, vpm_entries_count,
+ in_mbox, MLXSW_CMD_MBOX_SIZE);
+}
+
+/* cmd_mbox_map_fa_pa
+ * Physical Address.
+ */
+MLXSW_ITEM64_INDEXED(cmd_mbox, map_fa, pa, 0x00, 12, 52, 0x08, 0x00, true);
+
+/* cmd_mbox_map_fa_log2size
+ * Log (base 2) of the size in 4KB pages of the physical and contiguous memory
+ * that starts at PA_L/H.
+ */
+MLXSW_ITEM32_INDEXED(cmd_mbox, map_fa, log2size, 0x00, 0, 5, 0x08, 0x04, false);
+
+/* UNMAP_FA - Unmap Firmware Area
+ * ------------------------------
+ * OpMod == 0 (N/A), INMmod == 0 (N/A)
+ * -----------------------------------
+ * The UNMAP_FA command unload the firmware and unmaps all the
+ * firmware area. After this command is completed the device will not access
+ * the pages that were mapped to the firmware area. After executing UNMAP_FA
+ * command, software reset must be done prior to execution of MAP_FW command.
+ */
+
+static inline int mlxsw_cmd_unmap_fa(struct mlxsw_core *mlxsw_core)
+{
+ return mlxsw_cmd_exec_none(mlxsw_core, MLXSW_CMD_OPCODE_UNMAP_FA, 0, 0);
+}
+
+/* CONFIG_PROFILE (Set) - Configure Switch Profile
+ * ------------------------------
+ * OpMod == 1 (Set), INMmod == 0 (N/A)
+ * -----------------------------------
+ * The CONFIG_PROFILE command sets the switch profile. The command can be
+ * executed on the device only once at startup in order to allocate and
+ * configure all switch resources and prepare it for operational mode.
+ * It is not possible to change the device profile after the chip is
+ * in operational mode.
+ * Failure of the CONFIG_PROFILE command leaves the hardware in an indeterminate
+ * state therefore it is required to perform software reset to the device
+ * following an unsuccessful completion of the command. It is required
+ * to perform software reset to the device to change an existing profile.
+ */
+
+static inline int mlxsw_cmd_config_profile_set(struct mlxsw_core *mlxsw_core,
+ char *in_mbox)
+{
+ return mlxsw_cmd_exec_in(mlxsw_core, MLXSW_CMD_OPCODE_CONFIG_PROFILE,
+ 1, 0, in_mbox, MLXSW_CMD_MBOX_SIZE);
+}
+
+/* cmd_mbox_config_profile_set_max_vepa_channels
+ * Capability bit. Setting a bit to 1 configures the profile
+ * according to the mailbox contents.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, set_max_vepa_channels, 0x0C, 0, 1);
+
+/* cmd_mbox_config_profile_set_max_lag
+ * Capability bit. Setting a bit to 1 configures the profile
+ * according to the mailbox contents.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, set_max_lag, 0x0C, 1, 1);
+
+/* cmd_mbox_config_profile_set_max_port_per_lag
+ * Capability bit. Setting a bit to 1 configures the profile
+ * according to the mailbox contents.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, set_max_port_per_lag, 0x0C, 2, 1);
+
+/* cmd_mbox_config_profile_set_max_mid
+ * Capability bit. Setting a bit to 1 configures the profile
+ * according to the mailbox contents.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, set_max_mid, 0x0C, 3, 1);
+
+/* cmd_mbox_config_profile_set_max_pgt
+ * Capability bit. Setting a bit to 1 configures the profile
+ * according to the mailbox contents.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, set_max_pgt, 0x0C, 4, 1);
+
+/* cmd_mbox_config_profile_set_max_system_port
+ * Capability bit. Setting a bit to 1 configures the profile
+ * according to the mailbox contents.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, set_max_system_port, 0x0C, 5, 1);
+
+/* cmd_mbox_config_profile_set_max_vlan_groups
+ * Capability bit. Setting a bit to 1 configures the profile
+ * according to the mailbox contents.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, set_max_vlan_groups, 0x0C, 6, 1);
+
+/* cmd_mbox_config_profile_set_max_regions
+ * Capability bit. Setting a bit to 1 configures the profile
+ * according to the mailbox contents.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, set_max_regions, 0x0C, 7, 1);
+
+/* cmd_mbox_config_profile_set_fid_based
+ * Capability bit. Setting a bit to 1 configures the profile
+ * according to the mailbox contents.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, set_flood_mode, 0x0C, 8, 1);
+
+/* cmd_mbox_config_profile_set_max_flood_tables
+ * Capability bit. Setting a bit to 1 configures the profile
+ * according to the mailbox contents.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, set_flood_tables, 0x0C, 9, 1);
+
+/* cmd_mbox_config_profile_set_max_ib_mc
+ * Capability bit. Setting a bit to 1 configures the profile
+ * according to the mailbox contents.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, set_max_ib_mc, 0x0C, 12, 1);
+
+/* cmd_mbox_config_profile_set_max_pkey
+ * Capability bit. Setting a bit to 1 configures the profile
+ * according to the mailbox contents.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, set_max_pkey, 0x0C, 13, 1);
+
+/* cmd_mbox_config_profile_set_adaptive_routing_group_cap
+ * Capability bit. Setting a bit to 1 configures the profile
+ * according to the mailbox contents.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile,
+ set_adaptive_routing_group_cap, 0x0C, 14, 1);
+
+/* cmd_mbox_config_profile_set_ar_sec
+ * Capability bit. Setting a bit to 1 configures the profile
+ * according to the mailbox contents.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, set_ar_sec, 0x0C, 15, 1);
+
+/* cmd_mbox_config_profile_max_vepa_channels
+ * Maximum number of VEPA channels per port (0 through 16)
+ * 0 - multi-channel VEPA is disabled
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, max_vepa_channels, 0x10, 0, 8);
+
+/* cmd_mbox_config_profile_max_lag
+ * Maximum number of LAG IDs requested.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, max_lag, 0x14, 0, 16);
+
+/* cmd_mbox_config_profile_max_port_per_lag
+ * Maximum number of ports per LAG requested.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, max_port_per_lag, 0x18, 0, 16);
+
+/* cmd_mbox_config_profile_max_mid
+ * Maximum Multicast IDs.
+ * Multicast IDs are allocated from 0 to max_mid-1
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, max_mid, 0x1C, 0, 16);
+
+/* cmd_mbox_config_profile_max_pgt
+ * Maximum records in the Port Group Table per Switch Partition.
+ * Port Group Table indexes are from 0 to max_pgt-1
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, max_pgt, 0x20, 0, 16);
+
+/* cmd_mbox_config_profile_max_system_port
+ * The maximum number of system ports that can be allocated.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, max_system_port, 0x24, 0, 16);
+
+/* cmd_mbox_config_profile_max_vlan_groups
+ * Maximum number VLAN Groups for VLAN binding.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, max_vlan_groups, 0x28, 0, 12);
+
+/* cmd_mbox_config_profile_max_regions
+ * Maximum number of TCAM Regions.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, max_regions, 0x2C, 0, 16);
+
+/* cmd_mbox_config_profile_max_flood_tables
+ * Maximum number of Flooding Tables. Flooding Tables are associated to
+ * the different packet types for the different switch partitions.
+ * Note that the table size depends on the fid_based mode.
+ * In SwitchX silicon, tables are split equally between the switch
+ * partitions. e.g. for 2 swids and 8 tables, the first 4 are associated
+ * with swid-1 and the last 4 are associated with swid-2.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, max_flood_tables, 0x30, 16, 4);
+
+/* cmd_mbox_config_profile_max_vid_flood_tables
+ * Maximum number of per-vid flooding tables. Flooding tables are associated
+ * to the different packet types for the different switch partitions.
+ * Table size is 4K entries covering all VID space.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, max_vid_flood_tables, 0x30, 8, 4);
+
+/* cmd_mbox_config_profile_fid_based
+ * FID Based Flood Mode
+ * 00 Do not use FID to offset the index into the Port Group Table/Multicast ID
+ * 01 Use FID to offset the index to the Port Group Table (pgi)
+ * 10 Use FID to offset the index to the Port Group Table (pgi) and
+ * the Multicast ID
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, flood_mode, 0x30, 0, 2);
+
+/* cmd_mbox_config_profile_max_ib_mc
+ * Maximum number of multicast FDB records for InfiniBand
+ * FDB (in 512 chunks) per InfiniBand switch partition.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, max_ib_mc, 0x40, 0, 15);
+
+/* cmd_mbox_config_profile_max_pkey
+ * Maximum per port PKEY table size (for PKEY enforcement)
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, max_pkey, 0x44, 0, 15);
+
+/* cmd_mbox_config_profile_ar_sec
+ * Primary/secondary capability
+ * Describes the number of adaptive routing sub-groups
+ * 0 - disable primary/secondary (single group)
+ * 1 - enable primary/secondary (2 sub-groups)
+ * 2 - 3 sub-groups: Not supported in SwitchX, SwitchX-2
+ * 3 - 4 sub-groups: Not supported in SwitchX, SwitchX-2
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, ar_sec, 0x4C, 24, 2);
+
+/* cmd_mbox_config_profile_adaptive_routing_group_cap
+ * Adaptive Routing Group Capability. Indicates the number of AR groups
+ * supported. Note that when Primary/secondary is enabled, each
+ * primary/secondary couple consumes 2 adaptive routing entries.
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, adaptive_routing_group_cap, 0x4C, 0, 16);
+
+/* cmd_mbox_config_profile_arn
+ * Adaptive Routing Notification Enable
+ * Not supported in SwitchX, SwitchX-2
+ */
+MLXSW_ITEM32(cmd_mbox, config_profile, arn, 0x50, 31, 1);
+
+/* cmd_mbox_config_profile_swid_config_mask
+ * Modify Switch Partition Configuration mask. When set, the configu-
+ * ration value for the Switch Partition are taken from the mailbox.
+ * When clear, the current configuration values are used.
+ * Bit 0 - set type
+ * Bit 1 - properties
+ * Other - reserved
+ */
+MLXSW_ITEM32_INDEXED(cmd_mbox, config_profile, swid_config_mask,
+ 0x60, 24, 8, 0x08, 0x00, false);
+
+/* cmd_mbox_config_profile_swid_config_type
+ * Switch Partition type.
+ * 0000 - disabled (Switch Partition does not exist)
+ * 0001 - InfiniBand
+ * 0010 - Ethernet
+ * 1000 - router port (SwitchX-2 only)
+ * Other - reserved
+ */
+MLXSW_ITEM32_INDEXED(cmd_mbox, config_profile, swid_config_type,
+ 0x60, 20, 4, 0x08, 0x00, false);
+
+/* cmd_mbox_config_profile_swid_config_properties
+ * Switch Partition properties.
+ */
+MLXSW_ITEM32_INDEXED(cmd_mbox, config_profile, swid_config_properties,
+ 0x60, 0, 8, 0x08, 0x00, false);
+
+/* ACCESS_REG - Access EMAD Supported Register
+ * ----------------------------------
+ * OpMod == 0 (N/A), INMmod == 0 (N/A)
+ * -------------------------------------
+ * The ACCESS_REG command supports accessing device registers. This access
+ * is mainly used for bootstrapping.
+ */
+
+static inline int mlxsw_cmd_access_reg(struct mlxsw_core *mlxsw_core,
+ char *in_mbox, char *out_mbox)
+{
+ return mlxsw_cmd_exec(mlxsw_core, MLXSW_CMD_OPCODE_ACCESS_REG,
+ 0, 0, false, in_mbox, MLXSW_CMD_MBOX_SIZE,
+ out_mbox, MLXSW_CMD_MBOX_SIZE);
+}
+
+/* SW2HW_DQ - Software to Hardware DQ
+ * ----------------------------------
+ * OpMod == 0 (send DQ) / OpMod == 1 (receive DQ)
+ * INMmod == DQ number
+ * ----------------------------------------------
+ * The SW2HW_DQ command transitions a descriptor queue from software to
+ * hardware ownership. The command enables posting WQEs and ringing DoorBells
+ * on the descriptor queue.
+ */
+
+static inline int __mlxsw_cmd_sw2hw_dq(struct mlxsw_core *mlxsw_core,
+ char *in_mbox, u32 dq_number,
+ u8 opcode_mod)
+{
+ return mlxsw_cmd_exec_in(mlxsw_core, MLXSW_CMD_OPCODE_SW2HW_DQ,
+ opcode_mod, dq_number,
+ in_mbox, MLXSW_CMD_MBOX_SIZE);
+}
+
+enum {
+ MLXSW_CMD_OPCODE_MOD_SDQ = 0,
+ MLXSW_CMD_OPCODE_MOD_RDQ = 1,
+};
+
+static inline int mlxsw_cmd_sw2hw_sdq(struct mlxsw_core *mlxsw_core,
+ char *in_mbox, u32 dq_number)
+{
+ return __mlxsw_cmd_sw2hw_dq(mlxsw_core, in_mbox, dq_number,
+ MLXSW_CMD_OPCODE_MOD_SDQ);
+}
+
+static inline int mlxsw_cmd_sw2hw_rdq(struct mlxsw_core *mlxsw_core,
+ char *in_mbox, u32 dq_number)
+{
+ return __mlxsw_cmd_sw2hw_dq(mlxsw_core, in_mbox, dq_number,
+ MLXSW_CMD_OPCODE_MOD_RDQ);
+}
+
+/* cmd_mbox_sw2hw_dq_cq
+ * Number of the CQ that this Descriptor Queue reports completions to.
+ */
+MLXSW_ITEM32(cmd_mbox, sw2hw_dq, cq, 0x00, 24, 8);
+
+/* cmd_mbox_sw2hw_dq_sdq_tclass
+ * SDQ: CPU Egress TClass
+ * RDQ: Reserved
+ */
+MLXSW_ITEM32(cmd_mbox, sw2hw_dq, sdq_tclass, 0x00, 16, 6);
+
+/* cmd_mbox_sw2hw_dq_log2_dq_sz
+ * Log (base 2) of the Descriptor Queue size in 4KB pages.
+ */
+MLXSW_ITEM32(cmd_mbox, sw2hw_dq, log2_dq_sz, 0x00, 0, 6);
+
+/* cmd_mbox_sw2hw_dq_pa
+ * Physical Address.
+ */
+MLXSW_ITEM64_INDEXED(cmd_mbox, sw2hw_dq, pa, 0x10, 12, 52, 0x08, 0x00, true);
+
+/* HW2SW_DQ - Hardware to Software DQ
+ * ----------------------------------
+ * OpMod == 0 (send DQ) / OpMod == 1 (receive DQ)
+ * INMmod == DQ number
+ * ----------------------------------------------
+ * The HW2SW_DQ command transitions a descriptor queue from hardware to
+ * software ownership. Incoming packets on the DQ are silently discarded,
+ * SW should not post descriptors on nonoperational DQs.
+ */
+
+static inline int __mlxsw_cmd_hw2sw_dq(struct mlxsw_core *mlxsw_core,
+ u32 dq_number, u8 opcode_mod)
+{
+ return mlxsw_cmd_exec_none(mlxsw_core, MLXSW_CMD_OPCODE_HW2SW_DQ,
+ opcode_mod, dq_number);
+}
+
+static inline int mlxsw_cmd_hw2sw_sdq(struct mlxsw_core *mlxsw_core,
+ u32 dq_number)
+{
+ return __mlxsw_cmd_hw2sw_dq(mlxsw_core, dq_number,
+ MLXSW_CMD_OPCODE_MOD_SDQ);
+}
+
+static inline int mlxsw_cmd_hw2sw_rdq(struct mlxsw_core *mlxsw_core,
+ u32 dq_number)
+{
+ return __mlxsw_cmd_hw2sw_dq(mlxsw_core, dq_number,
+ MLXSW_CMD_OPCODE_MOD_RDQ);
+}
+
+/* 2ERR_DQ - To Error DQ
+ * ---------------------
+ * OpMod == 0 (send DQ) / OpMod == 1 (receive DQ)
+ * INMmod == DQ number
+ * ----------------------------------------------
+ * The 2ERR_DQ command transitions the DQ into the error state from the state
+ * in which it has been. While the command is executed, some in-process
+ * descriptors may complete. Once the DQ transitions into the error state,
+ * if there are posted descriptors on the RDQ/SDQ, the hardware writes
+ * a completion with error (flushed) for all descriptors posted in the RDQ/SDQ.
+ * When the command is completed successfully, the DQ is already in
+ * the error state.
+ */
+
+static inline int __mlxsw_cmd_2err_dq(struct mlxsw_core *mlxsw_core,
+ u32 dq_number, u8 opcode_mod)
+{
+ return mlxsw_cmd_exec_none(mlxsw_core, MLXSW_CMD_OPCODE_2ERR_DQ,
+ opcode_mod, dq_number);
+}
+
+static inline int mlxsw_cmd_2err_sdq(struct mlxsw_core *mlxsw_core,
+ u32 dq_number)
+{
+ return __mlxsw_cmd_2err_dq(mlxsw_core, dq_number,
+ MLXSW_CMD_OPCODE_MOD_SDQ);
+}
+
+static inline int mlxsw_cmd_2err_rdq(struct mlxsw_core *mlxsw_core,
+ u32 dq_number)
+{
+ return __mlxsw_cmd_2err_dq(mlxsw_core, dq_number,
+ MLXSW_CMD_OPCODE_MOD_RDQ);
+}
+
+/* QUERY_DQ - Query DQ
+ * ---------------------
+ * OpMod == 0 (send DQ) / OpMod == 1 (receive DQ)
+ * INMmod == DQ number
+ * ----------------------------------------------
+ * The QUERY_DQ command retrieves a snapshot of DQ parameters from the hardware.
+ *
+ * Note: Output mailbox has the same format as SW2HW_DQ.
+ */
+
+static inline int __mlxsw_cmd_query_dq(struct mlxsw_core *mlxsw_core,
+ char *out_mbox, u32 dq_number,
+ u8 opcode_mod)
+{
+ return mlxsw_cmd_exec_out(mlxsw_core, MLXSW_CMD_OPCODE_2ERR_DQ,
+ opcode_mod, dq_number, false,
+ out_mbox, MLXSW_CMD_MBOX_SIZE);
+}
+
+static inline int mlxsw_cmd_query_sdq(struct mlxsw_core *mlxsw_core,
+ char *out_mbox, u32 dq_number)
+{
+ return __mlxsw_cmd_query_dq(mlxsw_core, out_mbox, dq_number,
+ MLXSW_CMD_OPCODE_MOD_SDQ);
+}
+
+static inline int mlxsw_cmd_query_rdq(struct mlxsw_core *mlxsw_core,
+ char *out_mbox, u32 dq_number)
+{
+ return __mlxsw_cmd_query_dq(mlxsw_core, out_mbox, dq_number,
+ MLXSW_CMD_OPCODE_MOD_RDQ);
+}
+
+/* SW2HW_CQ - Software to Hardware CQ
+ * ----------------------------------
+ * OpMod == 0 (N/A), INMmod == CQ number
+ * -------------------------------------
+ * The SW2HW_CQ command transfers ownership of a CQ context entry from software
+ * to hardware. The command takes the CQ context entry from the input mailbox
+ * and stores it in the CQC in the ownership of the hardware. The command fails
+ * if the requested CQC entry is already in the ownership of the hardware.
+ */
+
+static inline int mlxsw_cmd_sw2hw_cq(struct mlxsw_core *mlxsw_core,
+ char *in_mbox, u32 cq_number)
+{
+ return mlxsw_cmd_exec_in(mlxsw_core, MLXSW_CMD_OPCODE_SW2HW_CQ,
+ 0, cq_number, in_mbox, MLXSW_CMD_MBOX_SIZE);
+}
+
+/* cmd_mbox_sw2hw_cq_cv
+ * CQE Version.
+ * 0 - CQE Version 0, 1 - CQE Version 1
+ */
+MLXSW_ITEM32(cmd_mbox, sw2hw_cq, cv, 0x00, 28, 4);
+
+/* cmd_mbox_sw2hw_cq_c_eqn
+ * Event Queue this CQ reports completion events to.
+ */
+MLXSW_ITEM32(cmd_mbox, sw2hw_cq, c_eqn, 0x00, 24, 1);
+
+/* cmd_mbox_sw2hw_cq_oi
+ * When set, overrun ignore is enabled. When set, updates of
+ * CQ consumer counter (poll for completion) or Request completion
+ * notifications (Arm CQ) DoorBells should not be rung on that CQ.
+ */
+MLXSW_ITEM32(cmd_mbox, sw2hw_cq, oi, 0x00, 12, 1);
+
+/* cmd_mbox_sw2hw_cq_st
+ * Event delivery state machine
+ * 0x0 - FIRED
+ * 0x1 - ARMED (Request for Notification)
+ */
+MLXSW_ITEM32(cmd_mbox, sw2hw_cq, st, 0x00, 8, 1);
+
+/* cmd_mbox_sw2hw_cq_log_cq_size
+ * Log (base 2) of the CQ size (in entries).
+ */
+MLXSW_ITEM32(cmd_mbox, sw2hw_cq, log_cq_size, 0x00, 0, 4);
+
+/* cmd_mbox_sw2hw_cq_producer_counter
+ * Producer Counter. The counter is incremented for each CQE that is
+ * written by the HW to the CQ.
+ * Maintained by HW (valid for the QUERY_CQ command only)
+ */
+MLXSW_ITEM32(cmd_mbox, sw2hw_cq, producer_counter, 0x04, 0, 16);
+
+/* cmd_mbox_sw2hw_cq_pa
+ * Physical Address.
+ */
+MLXSW_ITEM64_INDEXED(cmd_mbox, sw2hw_cq, pa, 0x10, 11, 53, 0x08, 0x00, true);
+
+/* HW2SW_CQ - Hardware to Software CQ
+ * ----------------------------------
+ * OpMod == 0 (N/A), INMmod == CQ number
+ * -------------------------------------
+ * The HW2SW_CQ command transfers ownership of a CQ context entry from hardware
+ * to software. The CQC entry is invalidated as a result of this command.
+ */
+
+static inline int mlxsw_cmd_hw2sw_cq(struct mlxsw_core *mlxsw_core,
+ u32 cq_number)
+{
+ return mlxsw_cmd_exec_none(mlxsw_core, MLXSW_CMD_OPCODE_HW2SW_CQ,
+ 0, cq_number);
+}
+
+/* QUERY_CQ - Query CQ
+ * ----------------------------------
+ * OpMod == 0 (N/A), INMmod == CQ number
+ * -------------------------------------
+ * The QUERY_CQ command retrieves a snapshot of the current CQ context entry.
+ * The command stores the snapshot in the output mailbox in the software format.
+ * Note that the CQ context state and values are not affected by the QUERY_CQ
+ * command. The QUERY_CQ command is for debug purposes only.
+ *
+ * Note: Output mailbox has the same format as SW2HW_CQ.
+ */
+
+static inline int mlxsw_cmd_query_cq(struct mlxsw_core *mlxsw_core,
+ char *out_mbox, u32 cq_number)
+{
+ return mlxsw_cmd_exec_out(mlxsw_core, MLXSW_CMD_OPCODE_QUERY_CQ,
+ 0, cq_number, false,
+ out_mbox, MLXSW_CMD_MBOX_SIZE);
+}
+
+/* SW2HW_EQ - Software to Hardware EQ
+ * ----------------------------------
+ * OpMod == 0 (N/A), INMmod == EQ number
+ * -------------------------------------
+ * The SW2HW_EQ command transfers ownership of an EQ context entry from software
+ * to hardware. The command takes the EQ context entry from the input mailbox
+ * and stores it in the EQC in the ownership of the hardware. The command fails
+ * if the requested EQC entry is already in the ownership of the hardware.
+ */
+
+static inline int mlxsw_cmd_sw2hw_eq(struct mlxsw_core *mlxsw_core,
+ char *in_mbox, u32 eq_number)
+{
+ return mlxsw_cmd_exec_in(mlxsw_core, MLXSW_CMD_OPCODE_SW2HW_EQ,
+ 0, eq_number, in_mbox, MLXSW_CMD_MBOX_SIZE);
+}
+
+/* cmd_mbox_sw2hw_eq_int_msix
+ * When set, MSI-X cycles will be generated by this EQ.
+ * When cleared, an interrupt will be generated by this EQ.
+ */
+MLXSW_ITEM32(cmd_mbox, sw2hw_eq, int_msix, 0x00, 24, 1);
+
+/* cmd_mbox_sw2hw_eq_int_oi
+ * When set, overrun ignore is enabled.
+ */
+MLXSW_ITEM32(cmd_mbox, sw2hw_eq, oi, 0x00, 12, 1);
+
+/* cmd_mbox_sw2hw_eq_int_st
+ * Event delivery state machine
+ * 0x0 - FIRED
+ * 0x1 - ARMED (Request for Notification)
+ * 0x11 - Always ARMED
+ * other - reserved
+ */
+MLXSW_ITEM32(cmd_mbox, sw2hw_eq, st, 0x00, 8, 2);
+
+/* cmd_mbox_sw2hw_eq_int_log_eq_size
+ * Log (base 2) of the EQ size (in entries).
+ */
+MLXSW_ITEM32(cmd_mbox, sw2hw_eq, log_eq_size, 0x00, 0, 4);
+
+/* cmd_mbox_sw2hw_eq_int_producer_counter
+ * Producer Counter. The counter is incremented for each EQE that is written
+ * by the HW to the EQ.
+ * Maintained by HW (valid for the QUERY_EQ command only)
+ */
+MLXSW_ITEM32(cmd_mbox, sw2hw_eq, producer_counter, 0x04, 0, 16);
+
+/* cmd_mbox_sw2hw_eq_int_pa
+ * Physical Address.
+ */
+MLXSW_ITEM64_INDEXED(cmd_mbox, sw2hw_eq, pa, 0x10, 11, 53, 0x08, 0x00, true);
+
+/* HW2SW_EQ - Hardware to Software EQ
+ * ----------------------------------
+ * OpMod == 0 (N/A), INMmod == EQ number
+ * -------------------------------------
+ */
+
+static inline int mlxsw_cmd_hw2sw_eq(struct mlxsw_core *mlxsw_core,
+ u32 eq_number)
+{
+ return mlxsw_cmd_exec_none(mlxsw_core, MLXSW_CMD_OPCODE_HW2SW_EQ,
+ 0, eq_number);
+}
+
+/* QUERY_EQ - Query EQ
+ * ----------------------------------
+ * OpMod == 0 (N/A), INMmod == EQ number
+ * -------------------------------------
+ *
+ * Note: Output mailbox has the same format as SW2HW_EQ.
+ */
+
+static inline int mlxsw_cmd_query_eq(struct mlxsw_core *mlxsw_core,
+ char *out_mbox, u32 eq_number)
+{
+ return mlxsw_cmd_exec_out(mlxsw_core, MLXSW_CMD_OPCODE_QUERY_EQ,
+ 0, eq_number, false,
+ out_mbox, MLXSW_CMD_MBOX_SIZE);
+}
+
+#endif
new file mode 100644
@@ -0,0 +1,551 @@
+/*
+ * drivers/net/ethernet/mellanox/mlxsw/core.c
+ * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
+ * Copyright (c) 2015 Ido Schimmel <idosch@mellanox.com>
+ * Copyright (c) 2015 Elad Raz <eladr@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/err.h>
+#include <linux/if_link.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/u64_stats_sync.h>
+#include <linux/netdevice.h>
+
+#include "core.h"
+#include "item.h"
+#include "cmd.h"
+#include "port.h"
+#include "trap.h"
+
+static LIST_HEAD(mlxsw_core_driver_list);
+static DEFINE_SPINLOCK(mlxsw_core_driver_list_lock);
+
+static const char mlxsw_core_driver_name[] = "mlxsw_core";
+
+static struct dentry *mlxsw_core_dbg_root;
+
+struct mlxsw_core_pcpu_stats {
+ u64 trap_rx_packets[MLXSW_TRAP_ID_MAX];
+ u64 trap_rx_bytes[MLXSW_TRAP_ID_MAX];
+ u64 port_rx_packets[MLXSW_PORT_MAX_PORTS];
+ u64 port_rx_bytes[MLXSW_PORT_MAX_PORTS];
+ struct u64_stats_sync syncp;
+ u32 trap_rx_dropped[MLXSW_TRAP_ID_MAX];
+ u32 port_rx_dropped[MLXSW_PORT_MAX_PORTS];
+ u32 trap_rx_invalid;
+ u32 port_rx_invalid;
+};
+
+struct mlxsw_core {
+ struct mlxsw_driver *driver;
+ const struct mlxsw_bus *bus;
+ void *bus_priv;
+ const struct mlxsw_bus_info *bus_info;
+ struct list_head rx_listener_list;
+ struct mlxsw_core_pcpu_stats __percpu *pcpu_stats;
+ struct dentry *dbg_dir;
+ struct {
+ struct debugfs_blob_wrapper vsd_blob;
+ struct debugfs_blob_wrapper psid_blob;
+ } dbg;
+ unsigned long driver_priv[0];
+ /* driver_priv has to be always the last item */
+};
+
+struct mlxsw_rx_listener_item {
+ struct list_head list;
+ struct mlxsw_rx_listener rxl;
+ void *priv;
+};
+
+/*****************
+ * Core functions
+ *****************/
+
+static int mlxsw_core_rx_stats_dbg_read(struct seq_file *file, void *data)
+{
+ struct mlxsw_core *mlxsw_core = file->private;
+ struct mlxsw_core_pcpu_stats *p;
+ u64 rx_packets, rx_bytes;
+ u64 tmp_rx_packets, tmp_rx_bytes;
+ u32 rx_dropped, rx_invalid;
+ unsigned int start;
+ int i;
+ int j;
+ static const char hdr[] =
+ " NUM RX_PACKETS RX_BYTES RX_DROPPED\n";
+
+ seq_printf(file, hdr);
+ for (i = 0; i < MLXSW_TRAP_ID_MAX; i++) {
+ rx_packets = 0;
+ rx_bytes = 0;
+ rx_dropped = 0;
+ for_each_possible_cpu(j) {
+ p = per_cpu_ptr(mlxsw_core->pcpu_stats, j);
+ do {
+ start = u64_stats_fetch_begin(&p->syncp);
+ tmp_rx_packets = p->trap_rx_packets[i];
+ tmp_rx_bytes = p->trap_rx_bytes[i];
+ } while (u64_stats_fetch_retry(&p->syncp, start));
+
+ rx_packets += tmp_rx_packets;
+ rx_bytes += tmp_rx_bytes;
+ rx_dropped += p->trap_rx_dropped[i];
+ }
+ seq_printf(file, "trap %3d %12llu %12llu %10u\n",
+ i, rx_packets, rx_bytes, rx_dropped);
+ }
+ rx_invalid = 0;
+ for_each_possible_cpu(j) {
+ p = per_cpu_ptr(mlxsw_core->pcpu_stats, j);
+ rx_invalid += p->trap_rx_invalid;
+ }
+ seq_printf(file, "trap INV %10u\n",
+ rx_invalid);
+
+ for (i = 0; i < MLXSW_PORT_MAX_PORTS; i++) {
+ rx_packets = 0;
+ rx_bytes = 0;
+ rx_dropped = 0;
+ for_each_possible_cpu(j) {
+ p = per_cpu_ptr(mlxsw_core->pcpu_stats, j);
+ do {
+ start = u64_stats_fetch_begin(&p->syncp);
+ tmp_rx_packets = p->port_rx_packets[i];
+ tmp_rx_bytes = p->port_rx_bytes[i];
+ } while (u64_stats_fetch_retry(&p->syncp, start));
+
+ rx_packets += tmp_rx_packets;
+ rx_bytes += tmp_rx_bytes;
+ rx_dropped += p->port_rx_dropped[i];
+ }
+ seq_printf(file, "port %3d %12llu %12llu %10u\n",
+ i, rx_packets, rx_bytes, rx_dropped);
+ }
+ rx_invalid = 0;
+ for_each_possible_cpu(j) {
+ p = per_cpu_ptr(mlxsw_core->pcpu_stats, j);
+ rx_invalid += p->port_rx_invalid;
+ }
+ seq_printf(file, "port INV %10u\n",
+ rx_invalid);
+ return 0;
+}
+
+static int mlxsw_core_rx_stats_dbg_open(struct inode *inode, struct file *f)
+{
+ struct mlxsw_core *mlxsw_core = inode->i_private;
+
+ return single_open(f, mlxsw_core_rx_stats_dbg_read, mlxsw_core);
+}
+
+static const struct file_operations mlxsw_core_rx_stats_dbg_ops = {
+ .owner = THIS_MODULE,
+ .open = mlxsw_core_rx_stats_dbg_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek
+};
+
+static void mlxsw_core_buf_dump_dbg(struct mlxsw_core *mlxsw_core,
+ const char *buf, size_t size)
+{
+ __be32 *m = (__be32 *) buf;
+ int i;
+ int count = size / sizeof(__be32);
+
+ for (i = count - 1; i >= 0; i--)
+ if (m[i])
+ break;
+ i++;
+ count = i ? i : 1;
+ for (i = 0; i < count; i += 4)
+ dev_dbg(mlxsw_core->bus_info->dev, "%04x - %08x %08x %08x %08x\n",
+ i * 4, be32_to_cpu(m[i]), be32_to_cpu(m[i + 1]),
+ be32_to_cpu(m[i + 2]), be32_to_cpu(m[i + 3]));
+}
+
+int mlxsw_core_driver_register(struct mlxsw_driver *mlxsw_driver)
+{
+ spin_lock(&mlxsw_core_driver_list_lock);
+ list_add_tail(&mlxsw_driver->list, &mlxsw_core_driver_list);
+ spin_unlock(&mlxsw_core_driver_list_lock);
+ return 0;
+}
+EXPORT_SYMBOL(mlxsw_core_driver_register);
+
+void mlxsw_core_driver_unregister(struct mlxsw_driver *mlxsw_driver)
+{
+ spin_lock(&mlxsw_core_driver_list_lock);
+ list_del(&mlxsw_driver->list);
+ spin_unlock(&mlxsw_core_driver_list_lock);
+}
+EXPORT_SYMBOL(mlxsw_core_driver_unregister);
+
+static struct mlxsw_driver *__driver_find(const char *kind)
+{
+ struct mlxsw_driver *mlxsw_driver;
+
+ list_for_each_entry(mlxsw_driver, &mlxsw_core_driver_list, list) {
+ if (strcmp(mlxsw_driver->kind, kind) == 0)
+ return mlxsw_driver;
+ }
+ return NULL;
+}
+
+static struct mlxsw_driver *mlxsw_core_driver_get(const char *kind)
+{
+ struct mlxsw_driver *mlxsw_driver;
+
+ spin_lock(&mlxsw_core_driver_list_lock);
+ mlxsw_driver = __driver_find(kind);
+ if (!mlxsw_driver) {
+ spin_unlock(&mlxsw_core_driver_list_lock);
+ request_module(MLXSW_MODULE_ALIAS_PREFIX "%s", kind);
+ spin_lock(&mlxsw_core_driver_list_lock);
+ mlxsw_driver = __driver_find(kind);
+ }
+ if (mlxsw_driver) {
+ if (!try_module_get(mlxsw_driver->owner))
+ mlxsw_driver = NULL;
+ }
+
+ spin_unlock(&mlxsw_core_driver_list_lock);
+ return mlxsw_driver;
+}
+
+static void mlxsw_core_driver_put(const char *kind)
+{
+ struct mlxsw_driver *mlxsw_driver;
+
+ spin_lock(&mlxsw_core_driver_list_lock);
+ mlxsw_driver = __driver_find(kind);
+ spin_unlock(&mlxsw_core_driver_list_lock);
+ if (!mlxsw_driver)
+ return;
+ module_put(mlxsw_driver->owner);
+}
+
+static int mlxsw_core_debugfs_init(struct mlxsw_core *mlxsw_core)
+{
+ const struct mlxsw_bus_info *bus_info = mlxsw_core->bus_info;
+
+ mlxsw_core->dbg_dir = debugfs_create_dir(bus_info->device_name,
+ mlxsw_core_dbg_root);
+ if (!mlxsw_core->dbg_dir)
+ return -ENOMEM;
+ debugfs_create_file("rx_stats", S_IRUGO, mlxsw_core->dbg_dir,
+ mlxsw_core, &mlxsw_core_rx_stats_dbg_ops);
+ mlxsw_core->dbg.vsd_blob.data = (void *) &bus_info->vsd;
+ mlxsw_core->dbg.vsd_blob.size = sizeof(bus_info->vsd);
+ debugfs_create_blob("vsd", S_IRUGO, mlxsw_core->dbg_dir,
+ &mlxsw_core->dbg.vsd_blob);
+ mlxsw_core->dbg.psid_blob.data = (void *) &bus_info->psid;
+ mlxsw_core->dbg.psid_blob.size = sizeof(bus_info->psid);
+ debugfs_create_blob("psid", S_IRUGO, mlxsw_core->dbg_dir,
+ &mlxsw_core->dbg.psid_blob);
+ return 0;
+}
+
+static void mlxsw_core_debugfs_fini(struct mlxsw_core *mlxsw_core)
+{
+ debugfs_remove_recursive(mlxsw_core->dbg_dir);
+}
+
+int mlxsw_core_bus_device_register(const struct mlxsw_bus_info *mlxsw_bus_info,
+ const struct mlxsw_bus *mlxsw_bus,
+ void *bus_priv)
+{
+ const char *device_kind = mlxsw_bus_info->device_kind;
+ struct mlxsw_core *mlxsw_core;
+ struct mlxsw_driver *mlxsw_driver;
+ size_t alloc_size;
+ int err;
+
+ mlxsw_driver = mlxsw_core_driver_get(device_kind);
+ if (!mlxsw_driver)
+ return -EINVAL;
+ alloc_size = sizeof(*mlxsw_core) + mlxsw_driver->priv_size;
+ mlxsw_core = kzalloc(alloc_size, GFP_KERNEL);
+ if (!mlxsw_core) {
+ err = -ENOMEM;
+ goto err_core_alloc;
+ }
+
+ INIT_LIST_HEAD(&mlxsw_core->rx_listener_list);
+ mlxsw_core->driver = mlxsw_driver;
+ mlxsw_core->bus = mlxsw_bus;
+ mlxsw_core->bus_priv = bus_priv;
+ mlxsw_core->bus_info = mlxsw_bus_info;
+
+ mlxsw_core->pcpu_stats =
+ netdev_alloc_pcpu_stats(struct mlxsw_core_pcpu_stats);
+ if (!mlxsw_core->pcpu_stats) {
+ err = -ENOMEM;
+ goto err_alloc_stats;
+ }
+ err = mlxsw_bus->init(bus_priv, mlxsw_core, mlxsw_driver->profile);
+ if (err)
+ goto err_bus_init;
+
+ err = mlxsw_driver->init(mlxsw_core->driver_priv, mlxsw_core,
+ mlxsw_bus_info);
+ if (err)
+ goto err_driver_init;
+
+ err = mlxsw_core_debugfs_init(mlxsw_core);
+ if (err)
+ goto err_debugfs_init;
+
+ return 0;
+
+err_debugfs_init:
+ mlxsw_core->driver->fini(mlxsw_core->driver_priv);
+err_driver_init:
+ mlxsw_bus->fini(bus_priv);
+err_bus_init:
+ free_percpu(mlxsw_core->pcpu_stats);
+err_alloc_stats:
+ kfree(mlxsw_core);
+err_core_alloc:
+ mlxsw_core_driver_put(device_kind);
+ return err;
+}
+EXPORT_SYMBOL(mlxsw_core_bus_device_register);
+
+void mlxsw_core_bus_device_unregister(struct mlxsw_core *mlxsw_core)
+{
+ const char *device_kind = mlxsw_core->bus_info->device_kind;
+
+ mlxsw_core_debugfs_fini(mlxsw_core);
+ mlxsw_core->driver->fini(mlxsw_core->driver_priv);
+ mlxsw_core->bus->fini(mlxsw_core->bus_priv);
+ free_percpu(mlxsw_core->pcpu_stats);
+ kfree(mlxsw_core);
+ mlxsw_core_driver_put(device_kind);
+}
+EXPORT_SYMBOL(mlxsw_core_bus_device_unregister);
+
+static struct mlxsw_core *__mlxsw_core_get(void *driver_priv)
+{
+ return container_of(driver_priv, struct mlxsw_core, driver_priv);
+}
+
+int mlxsw_core_skb_transmit(void *driver_priv, struct sk_buff *skb,
+ const struct mlxsw_tx_info *tx_info)
+{
+ struct mlxsw_core *mlxsw_core = __mlxsw_core_get(driver_priv);
+
+ return mlxsw_core->bus->skb_transmit(mlxsw_core->bus_priv, skb,
+ tx_info);
+}
+EXPORT_SYMBOL(mlxsw_core_skb_transmit);
+
+static bool __is_rx_listener_equal(const struct mlxsw_rx_listener *rxl_a,
+ const struct mlxsw_rx_listener *rxl_b)
+{
+ return (rxl_a->func == rxl_b->func &&
+ rxl_a->local_port == rxl_b->local_port &&
+ rxl_a->trap_id == rxl_b->trap_id);
+}
+
+static struct mlxsw_rx_listener_item *
+__find_rx_listener_item(struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_rx_listener *rxl,
+ void *priv)
+{
+ struct mlxsw_rx_listener_item *rxl_item;
+
+ list_for_each_entry(rxl_item, &mlxsw_core->rx_listener_list, list) {
+ if (__is_rx_listener_equal(&rxl_item->rxl, rxl) &&
+ rxl_item->priv == priv)
+ return rxl_item;
+ }
+ return NULL;
+}
+
+int mlxsw_core_rx_listener_register(struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_rx_listener *rxl,
+ void *priv)
+{
+ struct mlxsw_rx_listener_item *rxl_item;
+
+ rxl_item = __find_rx_listener_item(mlxsw_core, rxl, priv);
+ if (rxl_item)
+ return -EEXIST;
+ rxl_item = kmalloc(sizeof(*rxl_item), GFP_KERNEL);
+ if (!rxl_item)
+ return -ENOMEM;
+ rxl_item->rxl = *rxl;
+ rxl_item->priv = priv;
+
+ list_add_rcu(&rxl_item->list, &mlxsw_core->rx_listener_list);
+ return 0;
+}
+EXPORT_SYMBOL(mlxsw_core_rx_listener_register);
+
+void mlxsw_core_rx_listener_unregister(struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_rx_listener *rxl,
+ void *priv)
+{
+ struct mlxsw_rx_listener_item *rxl_item;
+
+ rxl_item = __find_rx_listener_item(mlxsw_core, rxl, priv);
+ if (!rxl_item)
+ return;
+ list_del_rcu(&rxl_item->list);
+ synchronize_rcu();
+ kfree(rxl_item);
+}
+EXPORT_SYMBOL(mlxsw_core_rx_listener_unregister);
+
+void mlxsw_core_skb_receive(struct mlxsw_core *mlxsw_core, struct sk_buff *skb,
+ struct mlxsw_rx_info *rx_info)
+{
+ struct mlxsw_rx_listener_item *rxl_item;
+ const struct mlxsw_rx_listener *rxl;
+ struct mlxsw_core_pcpu_stats *pcpu_stats;
+ u8 local_port = rx_info->sys_port;
+ bool found = false;
+
+ dev_dbg_ratelimited(mlxsw_core->bus_info->dev, "%s: sys_port = %d, trap_id = 0x%x\n",
+ __func__, rx_info->sys_port, rx_info->trap_id);
+
+ if ((rx_info->trap_id >= MLXSW_TRAP_ID_MAX) ||
+ (local_port >= MLXSW_PORT_MAX_PORTS))
+ goto drop;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(rxl_item, &mlxsw_core->rx_listener_list, list) {
+ rxl = &rxl_item->rxl;
+ if (((rxl->local_port == MLXSW_PORT_MAX_PORTS) ||
+ (rxl->local_port == local_port)) &&
+ ((rxl->trap_id == MLXSW_TRAP_ID_DONT_CARE) ||
+ (rxl->trap_id == rx_info->trap_id))) {
+ found = true;
+ break;
+ }
+ }
+ rcu_read_unlock();
+ if (!found)
+ goto drop;
+
+ pcpu_stats = this_cpu_ptr(mlxsw_core->pcpu_stats);
+ u64_stats_update_begin(&pcpu_stats->syncp);
+ pcpu_stats->port_rx_packets[local_port]++;
+ pcpu_stats->port_rx_bytes[local_port] += skb->len;
+ pcpu_stats->trap_rx_packets[rx_info->trap_id]++;
+ pcpu_stats->trap_rx_bytes[rx_info->trap_id] += skb->len;
+ u64_stats_update_end(&pcpu_stats->syncp);
+
+ rxl->func(skb, local_port, rx_info->trap_id, rxl_item->priv);
+ return;
+
+drop:
+ if (rx_info->trap_id >= MLXSW_TRAP_ID_MAX)
+ this_cpu_inc(mlxsw_core->pcpu_stats->trap_rx_invalid);
+ else
+ this_cpu_inc(mlxsw_core->pcpu_stats->trap_rx_dropped[rx_info->trap_id]);
+ if (local_port >= MLXSW_PORT_MAX_PORTS)
+ this_cpu_inc(mlxsw_core->pcpu_stats->port_rx_invalid);
+ else
+ this_cpu_inc(mlxsw_core->pcpu_stats->port_rx_dropped[local_port]);
+ dev_kfree_skb(skb);
+}
+EXPORT_SYMBOL(mlxsw_core_skb_receive);
+
+int mlxsw_cmd_exec(struct mlxsw_core *mlxsw_core, u16 opcode, u8 opcode_mod,
+ u32 in_mod, bool out_mbox_direct,
+ char *in_mbox, size_t in_mbox_size,
+ char *out_mbox, size_t out_mbox_size)
+{
+ u8 status;
+ int err;
+
+ BUG_ON(in_mbox_size % sizeof(u32) || out_mbox_size % sizeof(u32));
+ if (!mlxsw_core->bus->cmd_exec)
+ return -EOPNOTSUPP;
+
+ dev_dbg(mlxsw_core->bus_info->dev, "Cmd exec (opcode=%x(%s),opcode_mod=%x,in_mod=%x)\n",
+ opcode, mlxsw_cmd_opcode_str(opcode), opcode_mod, in_mod);
+ if (in_mbox) {
+ dev_dbg(mlxsw_core->bus_info->dev, "Input mailbox:\n");
+ mlxsw_core_buf_dump_dbg(mlxsw_core, in_mbox, in_mbox_size);
+ }
+
+ err = mlxsw_core->bus->cmd_exec(mlxsw_core->bus_priv, opcode,
+ opcode_mod, in_mod, out_mbox_direct,
+ in_mbox, in_mbox_size,
+ out_mbox, out_mbox_size, &status);
+
+ if (err == -EIO && status != MLXSW_CMD_STATUS_OK) {
+ dev_err(mlxsw_core->bus_info->dev, "Cmd exec failed (opcode=%x(%s),opcode_mod=%x,in_mod=%x,status=%x(%s))\n",
+ opcode, mlxsw_cmd_opcode_str(opcode), opcode_mod,
+ in_mod, status, mlxsw_cmd_status_str(status));
+ } else if (err == -ETIMEDOUT) {
+ dev_err(mlxsw_core->bus_info->dev, "Cmd exec timed-out (opcode=%x(%s),opcode_mod=%x,in_mod=%x)\n",
+ opcode, mlxsw_cmd_opcode_str(opcode), opcode_mod,
+ in_mod);
+ }
+
+ if (!err && out_mbox) {
+ dev_dbg(mlxsw_core->bus_info->dev, "Output mailbox:\n");
+ mlxsw_core_buf_dump_dbg(mlxsw_core, out_mbox, out_mbox_size);
+ }
+ return err;
+}
+EXPORT_SYMBOL(mlxsw_cmd_exec);
+
+static int __init mlxsw_core_module_init(void)
+{
+ mlxsw_core_dbg_root = debugfs_create_dir(mlxsw_core_driver_name, NULL);
+ if (!mlxsw_core_dbg_root)
+ return -ENOMEM;
+ return 0;
+}
+
+static void __exit mlxsw_core_module_exit(void)
+{
+ debugfs_remove_recursive(mlxsw_core_dbg_root);
+}
+
+module_init(mlxsw_core_module_init);
+module_exit(mlxsw_core_module_exit);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("Jiri Pirko <jiri@mellanox.com>");
+MODULE_DESCRIPTION("Mellanox switch device core driver");
new file mode 100644
@@ -0,0 +1,180 @@
+/*
+ * drivers/net/ethernet/mellanox/mlxsw/core.h
+ * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
+ * Copyright (c) 2015 Ido Schimmel <idosch@mellanox.com>
+ * Copyright (c) 2015 Elad Raz <eladr@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MLXSW_CORE_H
+#define _MLXSW_CORE_H
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/gfp.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+
+#include "cmd.h"
+
+#define MLXSW_MODULE_ALIAS_PREFIX "mlxsw-driver-"
+#define MODULE_MLXSW_DRIVER_ALIAS(kind) \
+ MODULE_ALIAS(MLXSW_MODULE_ALIAS_PREFIX kind)
+
+struct mlxsw_core;
+struct mlxsw_driver;
+struct mlxsw_bus;
+struct mlxsw_bus_info;
+
+int mlxsw_core_driver_register(struct mlxsw_driver *mlxsw_driver);
+void mlxsw_core_driver_unregister(struct mlxsw_driver *mlxsw_driver);
+
+int mlxsw_core_bus_device_register(const struct mlxsw_bus_info *mlxsw_bus_info,
+ const struct mlxsw_bus *mlxsw_bus,
+ void *bus_priv);
+void mlxsw_core_bus_device_unregister(struct mlxsw_core *mlxsw_core);
+
+struct mlxsw_tx_info {
+ u8 local_port;
+ bool is_emad;
+};
+
+int mlxsw_core_skb_transmit(void *driver_priv, struct sk_buff *skb,
+ const struct mlxsw_tx_info *tx_info);
+
+struct mlxsw_rx_listener {
+ void (*func)(struct sk_buff *skb, u8 local_port,
+ u16 trap_id, void *priv);
+ u8 local_port;
+ u16 trap_id;
+};
+
+int mlxsw_core_rx_listener_register(struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_rx_listener *rxl,
+ void *priv);
+void mlxsw_core_rx_listener_unregister(struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_rx_listener *rxl,
+ void *priv);
+
+struct mlxsw_rx_info {
+ u16 sys_port;
+ int trap_id;
+};
+
+void mlxsw_core_skb_receive(struct mlxsw_core *mlxsw_core, struct sk_buff *skb,
+ struct mlxsw_rx_info *rx_info);
+
+#define MLXSW_CONFIG_PROFILE_SWID_COUNT 8
+
+struct mlxsw_swid_config {
+ u8 used_type:1,
+ used_properties:1;
+ u8 type;
+ u8 properties;
+};
+
+struct mlxsw_config_profile {
+ u16 used_max_vepa_channels:1,
+ used_max_lag:1,
+ used_max_port_per_lag:1,
+ used_max_mid:1,
+ used_max_pgt:1,
+ used_max_system_port:1,
+ used_max_vlan_groups:1,
+ used_max_regions:1,
+ used_flood_tables:1,
+ used_flood_mode:1,
+ used_max_ib_mc:1,
+ used_max_pkey:1,
+ used_ar_sec:1,
+ used_adaptive_routing_group_cap:1;
+ u8 max_vepa_channels;
+ u16 max_lag;
+ u16 max_port_per_lag;
+ u16 max_mid;
+ u16 max_pgt;
+ u16 max_system_port;
+ u16 max_vlan_groups;
+ u16 max_regions;
+ u8 max_flood_tables;
+ u8 max_vid_flood_tables;
+ u8 flood_mode;
+ u16 max_ib_mc;
+ u16 max_pkey;
+ u8 ar_sec;
+ u16 adaptive_routing_group_cap;
+ u8 arn;
+ struct mlxsw_swid_config swid_config[MLXSW_CONFIG_PROFILE_SWID_COUNT];
+};
+
+struct mlxsw_driver {
+ struct list_head list;
+ const char *kind;
+ struct module *owner;
+ size_t priv_size;
+ int (*init)(void *driver_priv, struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_bus_info *mlxsw_bus_info);
+ void (*fini)(void *driver_priv);
+ void (*txhdr_construct)(struct sk_buff *skb,
+ const struct mlxsw_tx_info *tx_info);
+ u8 txhdr_len;
+ const struct mlxsw_config_profile *profile;
+};
+
+struct mlxsw_bus {
+ const char *kind;
+ int (*init)(void *bus_priv, struct mlxsw_core *mlxsw_core,
+ const struct mlxsw_config_profile *profile);
+ void (*fini)(void *bus_priv);
+ int (*skb_transmit)(void *bus_priv, struct sk_buff *skb,
+ const struct mlxsw_tx_info *tx_info);
+ int (*cmd_exec)(void *bus_priv, u16 opcode, u8 opcode_mod,
+ u32 in_mod, bool out_mbox_direct,
+ char *in_mbox, size_t in_mbox_size,
+ char *out_mbox, size_t out_mbox_size,
+ u8 *p_status);
+};
+
+struct mlxsw_bus_info {
+ const char *device_kind;
+ const char *device_name;
+ struct device *dev;
+ struct {
+ u16 major;
+ u16 minor;
+ u16 subminor;
+ } fw_rev;
+ u8 vsd[MLXSW_CMD_BOARDINFO_VSD_LEN];
+ u8 psid[MLXSW_CMD_BOARDINFO_PSID_LEN];
+};
+
+#endif
new file mode 100644
@@ -0,0 +1,405 @@
+/*
+ * drivers/net/ethernet/mellanox/mlxsw/item.h
+ * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
+ * Copyright (c) 2015 Ido Schimmel <idosch@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MLXSW_ITEM_H
+#define _MLXSW_ITEM_H
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/bitops.h>
+
+struct mlxsw_item {
+ unsigned short offset; /* bytes in container */
+ unsigned short step; /* step in bytes for indexed items */
+ unsigned short in_step_offset; /* offset within one step */
+ unsigned char shift; /* shift in bits */
+ unsigned char element_size; /* size of element in bit array */
+ bool no_real_shift;
+ union {
+ unsigned char bits;
+ unsigned short bytes;
+ } size;
+ const char *name;
+};
+
+static inline unsigned int
+__mlxsw_item_offset(struct mlxsw_item *item, unsigned short index,
+ size_t typesize)
+{
+ BUG_ON(index && !item->step);
+ if (item->offset % typesize != 0 ||
+ item->step % typesize != 0 ||
+ item->in_step_offset % typesize != 0) {
+ pr_err("mlxsw: item bug (name=%s,offset=%x,step=%x,in_step_offset=%x,typesize=%lx)\n",
+ item->name, item->offset, item->step,
+ item->in_step_offset, typesize);
+ BUG();
+ }
+
+ return ((item->offset + item->step * index + item->in_step_offset) /
+ typesize);
+}
+
+static inline u16 __mlxsw_item_get16(char *buf, struct mlxsw_item *item,
+ unsigned short index)
+{
+ unsigned int offset = __mlxsw_item_offset(item, index, sizeof(u16));
+ __be16 *b = (__be16 *) buf;
+ u16 tmp;
+
+ tmp = be16_to_cpu(b[offset]);
+ tmp >>= item->shift;
+ tmp &= GENMASK(item->size.bits - 1, 0);
+ if (item->no_real_shift)
+ tmp <<= item->shift;
+ return tmp;
+}
+
+static inline void __mlxsw_item_set16(char *buf, struct mlxsw_item *item,
+ unsigned short index, u16 val)
+{
+ unsigned int offset = __mlxsw_item_offset(item, index,
+ sizeof(u16));
+ __be16 *b = (__be16 *) buf;
+ u16 mask = GENMASK(item->size.bits - 1, 0) << item->shift;
+ u16 tmp;
+
+ if (!item->no_real_shift)
+ val <<= item->shift;
+ val &= mask;
+ tmp = be16_to_cpu(b[offset]);
+ tmp &= ~mask;
+ tmp |= val;
+ b[offset] = cpu_to_be16(tmp);
+}
+
+static inline u32 __mlxsw_item_get32(char *buf, struct mlxsw_item *item,
+ unsigned short index)
+{
+ unsigned int offset = __mlxsw_item_offset(item, index, sizeof(u32));
+ __be32 *b = (__be32 *) buf;
+ u32 tmp;
+
+ tmp = be32_to_cpu(b[offset]);
+ tmp >>= item->shift;
+ tmp &= GENMASK(item->size.bits - 1, 0);
+ if (item->no_real_shift)
+ tmp <<= item->shift;
+ return tmp;
+}
+
+static inline void __mlxsw_item_set32(char *buf, struct mlxsw_item *item,
+ unsigned short index, u32 val)
+{
+ unsigned int offset = __mlxsw_item_offset(item, index,
+ sizeof(u32));
+ __be32 *b = (__be32 *) buf;
+ u32 mask = GENMASK(item->size.bits - 1, 0) << item->shift;
+ u32 tmp;
+
+ if (!item->no_real_shift)
+ val <<= item->shift;
+ val &= mask;
+ tmp = be32_to_cpu(b[offset]);
+ tmp &= ~mask;
+ tmp |= val;
+ b[offset] = cpu_to_be32(tmp);
+}
+
+static inline u64 __mlxsw_item_get64(char *buf, struct mlxsw_item *item,
+ unsigned short index)
+{
+ unsigned int offset = __mlxsw_item_offset(item, index, sizeof(u64));
+ __be64 *b = (__be64 *) buf;
+ u64 tmp;
+
+ tmp = be64_to_cpu(b[offset]);
+ tmp >>= item->shift;
+ tmp &= GENMASK_ULL(item->size.bits - 1, 0);
+ if (item->no_real_shift)
+ tmp <<= item->shift;
+ return tmp;
+}
+
+static inline void __mlxsw_item_set64(char *buf, struct mlxsw_item *item,
+ unsigned short index, u64 val)
+{
+ unsigned int offset = __mlxsw_item_offset(item, index, sizeof(u64));
+ __be64 *b = (__be64 *) buf;
+ u64 mask = GENMASK_ULL(item->size.bits - 1, 0) << item->shift;
+ u64 tmp;
+
+ if (!item->no_real_shift)
+ val <<= item->shift;
+ val &= mask;
+ tmp = be64_to_cpu(b[offset]);
+ tmp &= ~mask;
+ tmp |= val;
+ b[offset] = cpu_to_be64(tmp);
+}
+
+static inline void __mlxsw_item_memcpy_from(char *buf, char *dst,
+ struct mlxsw_item *item)
+{
+ memcpy(dst, &buf[item->offset], item->size.bytes);
+}
+
+static inline void __mlxsw_item_memcpy_to(char *buf, char *src,
+ struct mlxsw_item *item)
+{
+ memcpy(&buf[item->offset], src, item->size.bytes);
+}
+
+static inline u16
+__mlxsw_item_bit_array_offset(struct mlxsw_item *item, u16 index, u8 *shift)
+{
+ u16 max_index, be_index;
+ u16 offset; /* byte offset inside the array */
+
+ BUG_ON(index && !item->element_size);
+ if (item->offset % sizeof(u32) != 0 ||
+ BITS_PER_BYTE % item->element_size != 0) {
+ pr_err("mlxsw: item bug (name=%s,offset=%x,element_size=%x)\n",
+ item->name, item->offset, item->element_size);
+ BUG();
+ }
+
+ max_index = (item->size.bytes << 3) / item->element_size - 1;
+ be_index = max_index - index;
+ offset = be_index * item->element_size >> 3;
+ *shift = index % (BITS_PER_BYTE / item->element_size) << 1;
+
+ return item->offset + offset;
+}
+
+static inline u8 __mlxsw_item_bit_array_get(char *buf, struct mlxsw_item *item,
+ u16 index)
+{
+ u8 shift, tmp;
+ u16 offset = __mlxsw_item_bit_array_offset(item, index, &shift);
+
+ tmp = buf[offset];
+ tmp >>= shift;
+ tmp &= GENMASK(item->element_size - 1, 0);
+ return tmp;
+}
+
+static inline void __mlxsw_item_bit_array_set(char *buf, struct mlxsw_item *item,
+ u16 index, u8 val)
+{
+ u8 shift, tmp;
+ u16 offset = __mlxsw_item_bit_array_offset(item, index, &shift);
+ u8 mask = GENMASK(item->element_size - 1, 0) << shift;
+
+ val <<= shift;
+ val &= mask;
+ tmp = buf[offset];
+ tmp &= ~mask;
+ tmp |= val;
+ buf[offset] = tmp;
+}
+
+#define __ITEM_NAME(_type, _cname, _iname) \
+ mlxsw_##_type##_##_cname##_##_iname##_item
+
+/* _type: cmd_mbox, reg, etc.
+ * _cname: containter name (e.g. command name, register name)
+ * _iname: item name within the container
+ */
+
+#define MLXSW_ITEM16(_type, _cname, _iname, _offset, _shift, _sizebits) \
+static struct mlxsw_item __ITEM_NAME(_type, _cname, _iname) = { \
+ .offset = _offset, \
+ .shift = _shift, \
+ .size = {.bits = _sizebits,}, \
+ .name = #_type "_" #_cname "_" #_iname, \
+}; \
+static inline u16 mlxsw_##_type##_##_cname##_##_iname##_get(char *buf) \
+{ \
+ return __mlxsw_item_get16(buf, &__ITEM_NAME(_type, _cname, _iname), 0); \
+} \
+static inline void mlxsw_##_type##_##_cname##_##_iname##_set(char *buf, u16 val)\
+{ \
+ __mlxsw_item_set16(buf, &__ITEM_NAME(_type, _cname, _iname), 0, val); \
+}
+
+#define MLXSW_ITEM16_INDEXED(_type, _cname, _iname, _offset, _shift, _sizebits, \
+ _step, _instepoffset, _norealshift) \
+static struct mlxsw_item __ITEM_NAME(_type, _cname, _iname) = { \
+ .offset = _offset, \
+ .step = _step, \
+ .in_step_offset = _instepoffset, \
+ .shift = _shift, \
+ .no_real_shift = _norealshift, \
+ .size = {.bits = _sizebits,}, \
+ .name = #_type "_" #_cname "_" #_iname, \
+}; \
+static inline u16 \
+mlxsw_##_type##_##_cname##_##_iname##_get(char *buf, unsigned short index) \
+{ \
+ return __mlxsw_item_get16(buf, &__ITEM_NAME(_type, _cname, _iname), \
+ index); \
+} \
+static inline void \
+mlxsw_##_type##_##_cname##_##_iname##_set(char *buf, unsigned short index, \
+ u16 val) \
+{ \
+ __mlxsw_item_set16(buf, &__ITEM_NAME(_type, _cname, _iname), \
+ index, val); \
+}
+
+#define MLXSW_ITEM32(_type, _cname, _iname, _offset, _shift, _sizebits) \
+static struct mlxsw_item __ITEM_NAME(_type, _cname, _iname) = { \
+ .offset = _offset, \
+ .shift = _shift, \
+ .size = {.bits = _sizebits,}, \
+ .name = #_type "_" #_cname "_" #_iname, \
+}; \
+static inline u32 mlxsw_##_type##_##_cname##_##_iname##_get(char *buf) \
+{ \
+ return __mlxsw_item_get32(buf, &__ITEM_NAME(_type, _cname, _iname), 0); \
+} \
+static inline void mlxsw_##_type##_##_cname##_##_iname##_set(char *buf, u32 val)\
+{ \
+ __mlxsw_item_set32(buf, &__ITEM_NAME(_type, _cname, _iname), 0, val); \
+}
+
+#define MLXSW_ITEM32_INDEXED(_type, _cname, _iname, _offset, _shift, _sizebits, \
+ _step, _instepoffset, _norealshift) \
+static struct mlxsw_item __ITEM_NAME(_type, _cname, _iname) = { \
+ .offset = _offset, \
+ .step = _step, \
+ .in_step_offset = _instepoffset, \
+ .shift = _shift, \
+ .no_real_shift = _norealshift, \
+ .size = {.bits = _sizebits,}, \
+ .name = #_type "_" #_cname "_" #_iname, \
+}; \
+static inline u32 \
+mlxsw_##_type##_##_cname##_##_iname##_get(char *buf, unsigned short index) \
+{ \
+ return __mlxsw_item_get32(buf, &__ITEM_NAME(_type, _cname, _iname), \
+ index); \
+} \
+static inline void \
+mlxsw_##_type##_##_cname##_##_iname##_set(char *buf, unsigned short index, \
+ u32 val) \
+{ \
+ __mlxsw_item_set32(buf, &__ITEM_NAME(_type, _cname, _iname), \
+ index, val); \
+}
+
+#define MLXSW_ITEM64(_type, _cname, _iname, _offset, _shift, _sizebits) \
+static struct mlxsw_item __ITEM_NAME(_type, _cname, _iname) = { \
+ .offset = _offset, \
+ .shift = _shift, \
+ .size = {.bits = _sizebits,}, \
+ .name = #_type "_" #_cname "_" #_iname, \
+}; \
+static inline u64 mlxsw_##_type##_##_cname##_##_iname##_get(char *buf) \
+{ \
+ return __mlxsw_item_get64(buf, &__ITEM_NAME(_type, _cname, _iname), 0); \
+} \
+static inline void mlxsw_##_type##_##_cname##_##_iname##_set(char *buf, u64 val)\
+{ \
+ __mlxsw_item_set64(buf, &__ITEM_NAME(_type, _cname, _iname), 0, val); \
+}
+
+#define MLXSW_ITEM64_INDEXED(_type, _cname, _iname, _offset, _shift, \
+ _sizebits, _step, _instepoffset, _norealshift) \
+static struct mlxsw_item __ITEM_NAME(_type, _cname, _iname) = { \
+ .offset = _offset, \
+ .step = _step, \
+ .in_step_offset = _instepoffset, \
+ .shift = _shift, \
+ .no_real_shift = _norealshift, \
+ .size = {.bits = _sizebits,}, \
+ .name = #_type "_" #_cname "_" #_iname, \
+}; \
+static inline u64 \
+mlxsw_##_type##_##_cname##_##_iname##_get(char *buf, unsigned short index) \
+{ \
+ return __mlxsw_item_get64(buf, &__ITEM_NAME(_type, _cname, _iname), \
+ index); \
+} \
+static inline void \
+mlxsw_##_type##_##_cname##_##_iname##_set(char *buf, unsigned short index, \
+ u64 val) \
+{ \
+ __mlxsw_item_set64(buf, &__ITEM_NAME(_type, _cname, _iname), \
+ index, val); \
+}
+
+#define MLXSW_ITEM_BUF(_type, _cname, _iname, _offset, _sizebytes) \
+static struct mlxsw_item __ITEM_NAME(_type, _cname, _iname) = { \
+ .offset = _offset, \
+ .size = {.bytes = _sizebytes,}, \
+ .name = #_type "_" #_cname "_" #_iname, \
+}; \
+static inline void \
+mlxsw_##_type##_##_cname##_##_iname##_memcpy_from(char *buf, char *dst) \
+{ \
+ __mlxsw_item_memcpy_from(buf, dst, &__ITEM_NAME(_type, _cname, _iname));\
+} \
+static inline void \
+mlxsw_##_type##_##_cname##_##_iname##_memcpy_to(char *buf, char *src) \
+{ \
+ __mlxsw_item_memcpy_to(buf, src, &__ITEM_NAME(_type, _cname, _iname)); \
+}
+
+#define MLXSW_ITEM_BIT_ARRAY(_type, _cname, _iname, _offset, _sizebytes, \
+ _element_size) \
+static struct mlxsw_item __ITEM_NAME(_type, _cname, _iname) = { \
+ .offset = _offset, \
+ .element_size = _element_size, \
+ .size = {.bytes = _sizebytes,}, \
+ .name = #_type "_" #_cname "_" #_iname, \
+}; \
+static inline u8 \
+mlxsw_##_type##_##_cname##_##_iname##_get(char *buf, u16 index) \
+{ \
+ return __mlxsw_item_bit_array_get(buf, \
+ &__ITEM_NAME(_type, _cname, _iname), \
+ index); \
+} \
+static inline void \
+mlxsw_##_type##_##_cname##_##_iname##_set(char *buf, u16 index, u8 val) \
+{ \
+ return __mlxsw_item_bit_array_set(buf, \
+ &__ITEM_NAME(_type, _cname, _iname), \
+ index, val); \
+} \
+
+#endif
new file mode 100644
@@ -0,0 +1,50 @@
+/*
+ * drivers/net/ethernet/mellanox/mlxsw/port.h
+ * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2015 Elad Raz <eladr@mellanox.com>
+ * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
+ * Copyright (c) 2015 Ido Schimmel <idosch@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _MLXSW_PORT_H
+#define _MLXSW_PORT_H
+
+#include <linux/types.h>
+
+#define MLXSW_PORT_MAX_MTU 10000
+
+#define MLXSW_PORT_DEFAULT_VID 1
+
+#define MLXSW_PORT_MAX_PHY_PORTS 0x40
+#define MLXSW_PORT_MAX_PORTS MLXSW_PORT_MAX_PHY_PORTS
+
+#define MLXSW_PORT_CPU_PORT 0x0
+
+#endif /* _MLXSW_PORT_H */
new file mode 100644
@@ -0,0 +1,68 @@
+/*
+ * drivers/net/ethernet/mellanox/mlxsw/trap.h
+ * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2015 Elad Raz <eladr@mellanox.com>
+ * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
+ * Copyright (c) 2015 Ido Schimmel <idosch@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _MLXSW_TRAP_H
+#define _MLXSW_TRAP_H
+
+enum {
+ /* Ethernet EMAD and FDB miss */
+ MLXSW_TRAP_ID_FDB_MC = 0x01,
+ MLXSW_TRAP_ID_ETHEMAD = 0x05,
+ /* L2 traps for specific packet types */
+ MLXSW_TRAP_ID_STP = 0x10,
+ MLXSW_TRAP_ID_LACP = 0x11,
+ MLXSW_TRAP_ID_EAPOL = 0x12,
+ MLXSW_TRAP_ID_LLDP = 0x13,
+ MLXSW_TRAP_ID_MMRP = 0x14,
+ MLXSW_TRAP_ID_MVRP = 0x15,
+ MLXSW_TRAP_ID_RPVST = 0x16,
+ MLXSW_TRAP_ID_DHCP = 0x19,
+ MLXSW_TRAP_ID_IGMP_QUERY = 0x30,
+ MLXSW_TRAP_ID_IGMP_V1_REPORT = 0x31,
+ MLXSW_TRAP_ID_IGMP_V2_REPORT = 0x32,
+ MLXSW_TRAP_ID_IGMP_V2_LEAVE = 0x33,
+ MLXSW_TRAP_ID_IGMP_V3_REPORT = 0x34,
+
+ MLXSW_TRAP_ID_MAX = 0x1FF
+};
+
+enum mlxsw_event_trap_id {
+ /* Port Up/Down event generated by hardware */
+ MLXSW_TRAP_ID_PUDE = 0x8,
+};
+
+#define MLXSW_TRAP_ID_DONT_CARE (MLXSW_TRAP_ID_MAX)
+
+#endif /* _MLXSW_TRAP_H */