| Message ID | 1414745754-4394-7-git-send-email-akshay.s@samsung.com |
|---|---|
| State | Changes Requested |
| Delegated to: | Minkyu Kang |
| Headers | show |
On 31 October 2014 02:55, Akshay Saraswat <akshay.s@samsung.com> wrote: > Add a 4G configuration and choose it based on the number of banks > declared in config file. A board with 4 SDRAM banks declared (as > per CONFIG_NR_DRAM_BANKS) will end up with the 2G confiuration. > > Signed-off-by: Doug Anderson <dianders@chromium.org> > Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> > --- > Changes since v2: > - Rebased this patch > > Changes since v1: > - Rebased this patch > > arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) Acked-by: Simon Glass <sjg@chromium.org> Tested on Pi: Tested-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c index 4d73b45..7c0b12a 100644 --- a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c +++ b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c @@ -464,6 +464,16 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset) + DMC_OFFSET); pmu = (struct exynos5_power *)EXYNOS5420_POWER_BASE; + if (CONFIG_NR_DRAM_BANKS > 4) { + /* Need both controllers. */ + mem->memcontrol |= DMC_MEMCONTROL_NUM_CHIP_2; + mem->chips_per_channel = 2; + mem->chips_to_configure = 2; + } else { + /* 2GB requires a single controller */ + mem->memcontrol |= DMC_MEMCONTROL_NUM_CHIP_1; + } + /* Enable PAUSE for DREX */ setbits_le32(&clk->pause, ENABLE_BIT);