| Message ID | 20211214163315.3769677-3-davidm@egauge.net |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | Add reset/enable GPIO support to SPI driver | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/dtbs-check | success | |
| robh/dt-meta-schema | fail | build log |
| robh/checkpatch | success | |
| robh/dtbs-check | success | |
| robh/dt-meta-schema | success | |
| robh/checkpatch | success | |
| robh/dtbs-check | success | |
| robh/dt-meta-schema | success | |
| robh/checkpatch | success | |
| robh/dtbs-check | success | |
| robh/dt-meta-schema | success |
On Tue, 14 Dec 2021 16:33:22 +0000, David Mosberger-Tang wrote: > Add documentation for the ENABLE and RESET GPIOs that may be needed by > wilc1000-spi. > > Signed-off-by: David Mosberger-Tang <davidm@egauge.net> > --- > .../net/wireless/microchip,wilc1000.yaml | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Error: Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.example.dts:30.37-38 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [scripts/Makefile.lib:373: Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.example.dt.yaml] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1413: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1567796 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Tue, 2021-12-14 at 14:04 -0600, Rob Herring wrote: > On Tue, 14 Dec 2021 16:33:22 +0000, David Mosberger-Tang wrote: > > Add documentation for the ENABLE and RESET GPIOs that may be needed by > > wilc1000-spi. > > > > Signed-off-by: David Mosberger-Tang <davidm@egauge.net> > > --- > > .../net/wireless/microchip,wilc1000.yaml | 17 +++++++++++++++++ > > 1 file changed, 17 insertions(+) > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > Error: Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.example.dts:30.37-38 syntax error > FATAL ERROR: Unable to parse input tree > make[1]: *** [scripts/Makefile.lib:373: Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.example.dt.yaml] Error 1 > make[1]: *** Waiting for unfinished jobs.... > make: *** [Makefile:1413: dt_binding_check] Error 2 So this error appears due to GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW in these lines: enable-gpios = <&pioA 5 GPIO_ACTIVE_HIGH>; reset-gpios = <&pioA 6 GPIO_ACTIVE_LOW>; I can replace those with 0 and 1 respectively, but I doubt a lot of people would recognize what those integers standard for. Is there a better way to get this to pass? --david
On Tue, Dec 14, 2021 at 5:30 PM David Mosberger-Tang <davidm@egauge.net> wrote: > > On Tue, 2021-12-14 at 14:04 -0600, Rob Herring wrote: > > On Tue, 14 Dec 2021 16:33:22 +0000, David Mosberger-Tang wrote: > > > Add documentation for the ENABLE and RESET GPIOs that may be needed by > > > wilc1000-spi. > > > > > > Signed-off-by: David Mosberger-Tang <davidm@egauge.net> > > > --- > > > .../net/wireless/microchip,wilc1000.yaml | 17 +++++++++++++++++ > > > 1 file changed, 17 insertions(+) > > > > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > > > yamllint warnings/errors: > > > > dtschema/dtc warnings/errors: > > Error: Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.example.dts:30.37-38 syntax error > > FATAL ERROR: Unable to parse input tree > > make[1]: *** [scripts/Makefile.lib:373: Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.example.dt.yaml] Error 1 > > make[1]: *** Waiting for unfinished jobs.... > > make: *** [Makefile:1413: dt_binding_check] Error 2 > > So this error appears due to GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW in these > lines: > > enable-gpios = <&pioA 5 GPIO_ACTIVE_HIGH>; > reset-gpios = <&pioA 6 GPIO_ACTIVE_LOW>; > > I can replace those with 0 and 1 respectively, but I doubt a lot of people would > recognize what those integers standard for. Is there a better way to get this > to pass? Include the header(s) you use in the example. Rob
On Tue, 2021-12-14 at 17:54 -0600, Rob Herring wrote: > On Tue, Dec 14, 2021 at 5:30 PM David Mosberger-Tang <davidm@egauge.net> wrote: > > On Tue, 2021-12-14 at 14:04 -0600, Rob Herring wrote: > > > > > > dtschema/dtc warnings/errors: > > > Error: Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.example.dts:30.37-38 syntax error > > > FATAL ERROR: Unable to parse input tree > > > make[1]: *** [scripts/Makefile.lib:373: Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.example.dt.yaml] Error 1 > > > make[1]: *** Waiting for unfinished jobs.... > > > make: *** [Makefile:1413: dt_binding_check] Error 2 > > > > So this error appears due to GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW in these > > lines: > > > > enable-gpios = <&pioA 5 GPIO_ACTIVE_HIGH>; > > reset-gpios = <&pioA 6 GPIO_ACTIVE_LOW>; > > > > I can replace those with 0 and 1 respectively, but I doubt a lot of people would > > recognize what those integers standard for. Is there a better way to get this > > to pass? > > Include the header(s) you use in the example. Huh, that works, thanks! --david
diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml index 6c35682377e6..790a774a19ee 100644 --- a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml @@ -32,6 +32,21 @@ properties: clock-names: const: rtc + enable-gpios: + maxItems: 1 + description: Used by wilc1000-spi to determine the GPIO line + connected to the ENABLE line. If specified, reset-gpios + must be specified as well as otherwise the driver cannot + ensure the timing required between asserting ENABLE + and deasserting RESET. This should be declared as an + active-high signal. + + reset-gpios: + maxItems: 1 + description: Used by wilc1000-spi to determine the GPIO line + connected to the RESET line. This should be declared as an + active-low signal. + required: - compatible - interrupts @@ -51,6 +66,8 @@ examples: interrupts = <27 0>; clocks = <&pck1>; clock-names = "rtc"; + enable-gpios = <&pioA 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pioA 6 GPIO_ACTIVE_LOW>; }; };
Add documentation for the ENABLE and RESET GPIOs that may be needed by wilc1000-spi. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> --- .../net/wireless/microchip,wilc1000.yaml | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)