| Message ID | 1636691059-4305-12-git-send-email-quic_fenglinw@quicinc.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | None | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | warning | total: 0 errors, 2 warnings, 122 lines checked |
| robh/dt-meta-schema | fail | build log |
On Fri, 12 Nov 2021 12:24:19 +0800, Fenglin Wu wrote: > Convert the SPMI PMIC arbiter documentation to JSON/yaml. > > Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> > --- > .../bindings/spmi/qcom,spmi-pmic-arb.txt | 67 ----------- > .../bindings/spmi/qcom,spmi-pmic-arb.yaml | 122 +++++++++++++++++++++ > 2 files changed, 122 insertions(+), 67 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt > create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml: properties:interrupt-names: 'const' should not be valid under {'enum': ['const', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'minimum', 'maximum', 'multipleOf', 'pattern']} hint: Scalar and array keywords cannot be mixed from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml: properties:reg-names: {'minItems': 3, 'maxItems': 5, 'items': [{'const': 'core'}, {'const': 'intr'}, {'const': 'cnfg'}, {'const': 'chnls'}, {'const': 'obsrvr'}]} should not be valid under {'required': ['maxItems']} hint: "maxItems" is not needed with an "items" list from schema $id: http://devicetree.org/meta-schemas/items.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml: ignoring, error in schema: properties: interrupt-names warning: no schema found in file: ./Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.example.dt.yaml: spmi@fc4cf000: reg: [[4232900608, 4096], [4232884224, 4096], [4232880128, 4096]] is too long From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/spmi.yaml Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.example.dt.yaml:0:0: /example-0/spmi@fc4cf000: failed to match any schema with compatible: ['qcom,spmi-pmic-arb'] doc reference errors (make refcheckdocs): Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt: Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt See https://patchwork.ozlabs.org/patch/1554141 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On 2021/11/12 21:48, Rob Herring wrote: > On Fri, 12 Nov 2021 12:24:19 +0800, Fenglin Wu wrote: >> Convert the SPMI PMIC arbiter documentation to JSON/yaml. >> >> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> >> --- >> .../bindings/spmi/qcom,spmi-pmic-arb.txt | 67 ----------- >> .../bindings/spmi/qcom,spmi-pmic-arb.yaml | 122 +++++++++++++++++++++ >> 2 files changed, 122 insertions(+), 67 deletions(-) >> delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt >> create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml >> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml: properties:interrupt-names: 'const' should not be valid under {'enum': ['const', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'minimum', 'maximum', 'multipleOf', 'pattern']} > hint: Scalar and array keywords cannot be mixed > from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml: properties:reg-names: {'minItems': 3, 'maxItems': 5, 'items': [{'const': 'core'}, {'const': 'intr'}, {'const': 'cnfg'}, {'const': 'chnls'}, {'const': 'obsrvr'}]} should not be valid under {'required': ['maxItems']} > hint: "maxItems" is not needed with an "items" list > from schema $id: http://devicetree.org/meta-schemas/items.yaml# > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml: ignoring, error in schema: properties: interrupt-names > warning: no schema found in file: ./Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.example.dt.yaml: spmi@fc4cf000: reg: [[4232900608, 4096], [4232884224, 4096], [4232880128, 4096]] is too long > From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/spmi.yaml > Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.example.dt.yaml:0:0: /example-0/spmi@fc4cf000: failed to match any schema with compatible: ['qcom,spmi-pmic-arb'] > > doc reference errors (make refcheckdocs): > Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt: Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt > > See https://patchwork.ozlabs.org/patch/1554141 > > This check can fail if there are any dependencies. The base for a patch > series is generally the most recent rc1. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit. I actually ran "make dt-binding-check DT_SCHEMA_FILES=Documentation/devicetree/bindings/qcom,spmi-pmic-arb.txt" and confirmed there was no error or warning before pushing the change. Anyway I will follow your steps here andcheck it again, if any changes is required, I will have them updated it in next patchset. Thanks >
On 2021/11/15 8:16, Fenglin Wu wrote: > > On 2021/11/12 21:48, Rob Herring wrote: >> On Fri, 12 Nov 2021 12:24:19 +0800, Fenglin Wu wrote: >>> Convert the SPMI PMIC arbiter documentation to JSON/yaml. >>> >>> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> >>> --- >>> .../bindings/spmi/qcom,spmi-pmic-arb.txt | 67 ----------- >>> .../bindings/spmi/qcom,spmi-pmic-arb.yaml | 122 >>> +++++++++++++++++++++ >>> 2 files changed, 122 insertions(+), 67 deletions(-) >>> delete mode 100644 >>> Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt >>> create mode 100644 >>> Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml >>> >> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' >> on your patch (DT_CHECKER_FLAGS is new in v5.13): >> >> yamllint warnings/errors: >> >> dtschema/dtc warnings/errors: >> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml: >> properties:interrupt-names: 'const' should not be valid under >> {'enum': ['const', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', >> 'minimum', 'maximum', 'multipleOf', 'pattern']} >> hint: Scalar and array keywords cannot be mixed >> from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# >> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml: >> properties:reg-names: {'minItems': 3, 'maxItems': 5, 'items': >> [{'const': 'core'}, {'const': 'intr'}, {'const': 'cnfg'}, {'const': >> 'chnls'}, {'const': 'obsrvr'}]} should not be valid under >> {'required': ['maxItems']} >> hint: "maxItems" is not needed with an "items" list >> from schema $id: http://devicetree.org/meta-schemas/items.yaml# >> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml: >> ignoring, error in schema: properties: interrupt-names >> warning: no schema found in file: >> ./Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml >> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.example.dt.yaml: >> spmi@fc4cf000: reg: [[4232900608, 4096], [4232884224, 4096], >> [4232880128, 4096]] is too long >> From schema: >> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/spmi.yaml >> Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.example.dt.yaml:0:0: >> /example-0/spmi@fc4cf000: failed to match any schema with compatible: >> ['qcom,spmi-pmic-arb'] >> >> doc reference errors (make refcheckdocs): >> Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt: >> Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt >> >> See https://patchwork.ozlabs.org/patch/1554141 >> >> This check can fail if there are any dependencies. The base for a patch >> series is generally the most recent rc1. >> >> If you already ran 'make dt_binding_check' and didn't see the above >> error(s), then make sure 'yamllint' is installed and dt-schema is up to >> date: >> >> pip3 install dtschema --upgrade >> >> Please check and re-submit. > I actually ran "make dt-binding-check > DT_SCHEMA_FILES=Documentation/devicetree/bindings/qcom,spmi-pmic-arb.txt" > and confirmed there was no error or warning before pushing the change. > Anyway I will follow > your steps here andcheck it again, if any changes is required, I will > have them updated it > in next patchset. > Thanks I could see the same warning message after installed 'yamllint'. I will fix this and re-submit. Thanks
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt deleted file mode 100644 index 6332507..0000000 --- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt +++ /dev/null @@ -1,67 +0,0 @@ -Qualcomm SPMI Controller (PMIC Arbiter) - -The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI -controller with wrapping arbitration logic to allow for multiple on-chip -devices to control a single SPMI master. - -The PMIC Arbiter can also act as an interrupt controller, providing interrupts -to slave devices. - -See Documentation/devicetree/bindings/spmi/spmi.yaml for the generic SPMI -controller binding requirements for child nodes. - -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for -generic interrupt controller binding documentation. - -Required properties: -- compatible : should be "qcom,spmi-pmic-arb". -- reg-names : must contain: - "core" - core registers - "intr" - interrupt controller registers - "cnfg" - configuration registers - Registers used only for V2 PMIC Arbiter: - "chnls" - tx-channel per virtual slave registers. - "obsrvr" - rx-channel (called observer) per virtual slave registers. - -- reg : address + size pairs describing the PMIC arb register sets; order must - correspond with the order of entries in reg-names -- #address-cells : must be set to 2 -- #size-cells : must be set to 0 -- qcom,ee : indicates the active Execution Environment identifier (0-5) -- qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5) - -Optional properties: -- interrupts : interrupt list for the PMIC Arb controller, must contain a - single interrupt entry for the peripheral interrupt -- interrupt-names : corresponding interrupt names for the interrupts - listed in the 'interrupts' property, must contain: - "periph_irq" - summary interrupt for PMIC peripherals -- interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller -- #interrupt-cells : must be set to 4. Interrupts are specified as a 4-tuple: - cell 1: slave ID for the requested interrupt (0-15) - cell 2: peripheral ID for requested interrupt (0-255) - cell 3: the requested peripheral interrupt (0-7) - cell 4: interrupt flags indicating level-sense information, as defined in - dt-bindings/interrupt-controller/irq.h - -Example: - - spmi { - compatible = "qcom,spmi-pmic-arb"; - reg-names = "core", "intr", "cnfg"; - reg = <0xfc4cf000 0x1000>, - <0xfc4cb000 0x1000>, - <0xfc4ca000 0x1000>; - - interrupt-names = "periph_irq"; - interrupts = <0 190 0>; - - qcom,ee = <0>; - qcom,channel = <0>; - - #address-cells = <2>; - #size-cells = <0>; - - interrupt-controller; - #interrupt-cells = <4>; - }; diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml new file mode 100644 index 0000000..ac97b93 --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SPMI PMIC Arbiter + +maintainers: + - Fenglin Wu <quic_fenglinw@quicinc.com> + +description: | + The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI + controller with wrapping arbitration logic to allow for multiple + on-chip devices to control a single SPMI master. + + The PMIC Arbiter can also act as an interrupt controller, providing + interrupts to slave devices. + + See Documentation/devicetree/bindings/spmi/spmi.yaml for the generic + SPMI controller binding requirements for child nodes. + +properties: + $nodename: + pattern: "^spmi@.*" + + compatible: + const: qcom,spmi-pmic-arb + + reg-names: + minItems: 3 + maxItems: 5 + items: + - const: core + - const: intr + - const: cnfg + - const: chnls + - const: obsrvr + + reg: + minItems: 3 + maxItems: 5 + description: | + Specifies base physical address and size of the registers in SPMI PMIC + Arbiter HW module, with the following order. + - SPMI PMIC arbiter core registers (core) + - SPMI PMIC arbiter interrupt controller registers (intr) + - SPMI PMIC arbiter configuration registers (cnfg) + - SPMI PMIC arbiter tx-channel per virtual slave registers (chnls) + - SPMI PMIC arbiter rx-channel per virtual slave registers (obsrvr). + Register for "chnls" and "obsrvr" are only applicable for PMIC arbiter + with HW version greater than V2. + + "#address-cells": + const: 2 + + "#size-cells": + const: 0 + + interrupts: + description: The summary interrupt for the PMIC Arb controller. + maxItems: 1 + + interrupt-names: + maxItems: 1 + const: periph_irq + + interrupt-controller: true + + "#interrupt-cells": + const: 4 + description: | + Specifies the number of cells needed to encode any interrupt source. + The 1st cell is the slave ID for the requested interrupt, its valid + range is [0-15]. + The 2nd cell is the peripheral ID for requested interrupt, its valid + range is [0-255]. + The 3rd cell is the requested peripheral interrupt, its valid range + is [0-7]. + The 4th cell is interrupt flags indicating level-sense information, + as defined in dt-bindings/interrupt-controller/irq.h + + qcom,ee: + description: the active Execution Environment identifier + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5] + + qcom,channel: + description: which of the PMIC Arbiter provided channels to use for accesses + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5] + +required: + - compatible + - reg-names + - reg + - "#address-cells" + - "#size-cells" + - qcom,ee + - qcom,channel + +additionalProperties: false + +examples: + - | + spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + interrupt-names = "periph_irq"; + interrupts = <0 190 0>; + interrupt-controller; + #interrupt-cells = <4>; + + qcom,ee = <0>; + qcom,channel = <0>; + + #address-cells = <2>; + #size-cells = <0>; + };
Convert the SPMI PMIC arbiter documentation to JSON/yaml. Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> --- .../bindings/spmi/qcom,spmi-pmic-arb.txt | 67 ----------- .../bindings/spmi/qcom,spmi-pmic-arb.yaml | 122 +++++++++++++++++++++ 2 files changed, 122 insertions(+), 67 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml