| Message ID | 20211111154557.852637-2-jagan@amarulasolutions.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | None | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/dt-meta-schema | fail | build log |
On Thu, 11 Nov 2021 21:15:56 +0530, Jagan Teki wrote: > i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam. > > C.TOUCH 2.0 is a general purpose carrier board with capacitive > touch interface support. > > 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions. > > i.Core STM32MP1 needs to mount on top of C.TOUCH 2.0 carrier with > pluged 10.1" OF for creating complete i.Core STM32MP1 C.TOUCH 2.0 > 10.1" Open Frame board. > > Add bindings for it. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 1 + > 1 file changed, 1 insertion(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/arm/stm32/stm32.yaml:76:111: [warning] line too long (116 > 110 characters) (line-length) dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1553999 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index bcaf7be3ab37..d2dd3f1847bb 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -77,6 +77,7 @@ properties: items: - enum: - engicam,icore-stm32mp1-ctouch2 # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0 + - engicam,icore-stm32mp1-ctouch2-of10 # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" Open Frame - engicam,icore-stm32mp1-edimm2.2 # STM32MP1 Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit - const: engicam,icore-stm32mp1 # STM32MP1 Engicam i.Core STM32MP1 SoM - const: st,stm32mp157
i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam. C.TOUCH 2.0 is a general purpose carrier board with capacitive touch interface support. 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions. i.Core STM32MP1 needs to mount on top of C.TOUCH 2.0 carrier with pluged 10.1" OF for creating complete i.Core STM32MP1 C.TOUCH 2.0 10.1" Open Frame board. Add bindings for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 1 + 1 file changed, 1 insertion(+)