diff mbox series

[2/3] dt-bindings: reset: uniphier: Add NX1 reset control binding

Message ID 1633399842-1402-3-git-send-email-hayashi.kunihiko@socionext.com
State Not Applicable, archived
Headers show
Series reset: uniphier: Introduce some features and NX1 support | expand

Checks

Context Check Description
robh/checkpatch success
robh/dt-meta-schema success
robh/dtbs-check fail build log

Commit Message

Kunihiko Hayashi Oct. 5, 2021, 2:10 a.m. UTC 
Update reset controller binding document for UniPhier NX1 SoC.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
 .../devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml       | 1 +
 Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml  | 3 +++
 2 files changed, 4 insertions(+)

Comments

Rob Herring (Arm) Oct. 5, 2021, 12:26 p.m. UTC | #1 
On Tue, 05 Oct 2021 11:10:41 +0900, Kunihiko Hayashi wrote:
> Update reset controller binding document for UniPhier NX1 SoC.
> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
>  .../devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml       | 1 +
>  Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml  | 3 +++
>  2 files changed, 4 insertions(+)
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/1536452


reset: 'resets' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/socionext/uniphier-ld11-global.dt.yaml
	arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dt.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
index 29e4a90..bfbd3e9 100644
--- a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
@@ -23,6 +23,7 @@  properties:
       - socionext,uniphier-pxs2-usb3-reset
       - socionext,uniphier-ld20-usb3-reset
       - socionext,uniphier-pxs3-usb3-reset
+      - socionext,uniphier-nx1-usb3-reset
       - socionext,uniphier-pro4-ahci-reset
       - socionext,uniphier-pxs2-ahci-reset
       - socionext,uniphier-pxs3-ahci-reset
diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
index 4c9b0eb..377a7d2 100644
--- a/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
@@ -23,6 +23,7 @@  properties:
           - socionext,uniphier-ld11-reset
           - socionext,uniphier-ld20-reset
           - socionext,uniphier-pxs3-reset
+          - socionext,uniphier-nx1-reset
       - description: Media I/O (MIO) reset, SD reset
         enum:
           - socionext,uniphier-ld4-mio-reset
@@ -34,6 +35,7 @@  properties:
           - socionext,uniphier-ld11-sd-reset
           - socionext,uniphier-ld20-sd-reset
           - socionext,uniphier-pxs3-sd-reset
+          - socionext,uniphier-nx1-sd-reset
       - description: Peripheral reset
         enum:
           - socionext,uniphier-ld4-peri-reset
@@ -44,6 +46,7 @@  properties:
           - socionext,uniphier-ld11-peri-reset
           - socionext,uniphier-ld20-peri-reset
           - socionext,uniphier-pxs3-peri-reset
+          - socionext,uniphier-nx1-peri-reset
       - description: Analog signal amplifier reset
         enum:
           - socionext,uniphier-ld11-adamv-reset