new file mode 100644
@@ -0,0 +1,220 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/nxp,pf8x00-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PF8x00 Power Management Integrated Circuit regulators
+
+maintainers:
+ - Adrien Grassein <adrien.grassein@gmail.com>
+
+description:
+ pf8x00 are a 12-chanel regulator PMIC family. Regulators nodes should
+ be named to ldo<>, sw<> and vnss. The definition for each of these nodes
+ is defined using the standard binding for regulators at
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+ Datasheet is available at https://www.nxp.com/docs/en/data-sheet/PF8100_PF8200.pdf
+
+properties:
+ compatible:
+ enum:
+ - nxp,pf8100
+ - nxp,pf8121a
+ - nxp,pf8200
+
+ reg:
+ maxItems: 1
+
+ regulators:
+ type: object
+ description:
+ list of regulators provided by this controller
+
+ patternProperties:
+ "^ldo[1-4]$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single LDO regulator.
+
+ properties:
+ nxp,hw-en:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Only available for ldo2. If present, use LDO2EN input pin
+ to enable or disable ldo2. (LDO2EN should be in HIGH state
+ to enable LDO2 if nxp,hw-en is specified).
+
+ nxp,vselect-en:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Only available for ldo2. When specified, use the VSELECT
+ input pin of the chip to control the output voltage of the
+ ldo02 regulator. (3.3V if VSELECT is LOW, 1.8V if HIGH).
+
+ unevaluatedProperties: false
+
+ "^sw[1-7]$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single SW regulator.
+
+ properties:
+ nxp,phase:
+ $ref: /schemas/types.yaml#definitions/uint32
+ minimum: 0
+ maximum: 315
+ enum: [ 0, 45, 90, 135, 180, 225, 270, 315 ]
+ description:
+ This controls the phase shift of the switching frequency.
+ Default value is the one written in the OTP configuration.
+
+ nxp,fast-slew:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ Enables the fast DVS ramp of the regulator.
+ Default is slow DVS ramp.
+ Not available for sw7 regulator.
+ Default value is the one written in the OTP configuration.
+
+ nxp,dual-phase:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ This allow regulators sw1 and sw2, sw3 and sw4, sw5 and sw6,
+ to work together to deliver a maximum 5A current.
+ Should be only specified for sw1, sw3 and sw5.
+ If set, sw2, sw4 and sw6 configuration will be totally ignored.
+ This is not a configuration property. It's only used to control
+ the consistency of the OTP confguration.
+
+ nxp,quad-phase:
+ $ref: /schemas/types.yaml#definitions/flag
+ description:
+ This allow regulators sw1, sw2, sw3 and sw4 to work together
+ to deliver a maximum 10A current. Should be only specified for
+ sw1. If set, sw2, sw3 and sw4 configuration will be totally ignored.
+ This is not a configuration property. It's only used to control
+ the consistency of the OTP confguration.
+
+ unevaluatedProperties: false
+
+ properties:
+ vsnvs:
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for vsnvs regulator.
+
+ unevaluatedProperties: false
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic@8 {
+ compatible = "nxp,pf8100";
+ reg = <0x08>;
+
+ regulators {
+ reg_ldo1: ldo1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <1500000>;
+ };
+
+ reg_ldo2: ldo2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <1500000>;
+ };
+
+ reg_ldo3: ldo3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <1500000>;
+ };
+
+ reg_ldo4: ldo4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <1500000>;
+ };
+
+ reg_sw1: sw1 {
+ nxp,phase = <0>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <400000>;
+ regulator-max-microamp = <4500000>;
+ };
+
+ reg_sw2: sw2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <400000>;
+ };
+
+ reg_sw3: sw3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <400000>;
+ nxp,fast-slew;
+ };
+
+ reg_sw4: sw4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <400000>;
+ nxp,fast-slew;
+ };
+
+ reg_sw5: sw5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <400000>;
+ };
+
+ reg_sw6: sw6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <400000>;
+ };
+
+ reg_sw7: sw7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <4100000>;
+ regulator-min-microvolt = <1000000>;
+ };
+
+ reg_vsnvs: vsnvs {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ };
+ };
+ };
+ };
@@ -13804,6 +13804,12 @@ S: Maintained
F: include/linux/personality.h
F: include/uapi/linux/personality.h
+PF8x00 PMIC REGULATORS DRIVERS
+M: Adrien Grassein <adrien.grassein@gmail.com>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
+
PHOENIX RC FLIGHT CONTROLLER ADAPTER
M: Marcus Folkesson <marcus.folkesson@gmail.com>
L: linux-input@vger.kernel.org
Add a devicetree binding documentation for the pf8x00 regulator driver. Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com> --- .../regulator/nxp,pf8x00-regulator.yaml | 220 ++++++++++++++++++ MAINTAINERS | 6 + 2 files changed, 226 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml