diff mbox series

[v2,1/2] dt-bindings: input: Add Dell Wyse 3020 Power Button binding

Message ID 20201129142145.1526022-2-lkundrak@v3.sk
State Superseded, archived
Headers show
Series Add driver for power button on Dell Wyse 3020 | expand

Checks

Context Check Description
robh/checkpatch success
robh/dt-meta-schema fail build log

Commit Message

Lubomir Rintel Nov. 29, 2020, 2:21 p.m. UTC
Add binding document for the Dell Wyse 3020 a.k.a. "Ariel" Power Button.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>

---
Changes since v1:
- Collect Rob's R-b

 .../bindings/input/ariel-pwrbutton.yaml       | 53 +++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml

Comments

Rob Herring (Arm) Nov. 30, 2020, 5:37 p.m. UTC | #1
On Sun, 29 Nov 2020 15:21:44 +0100, Lubomir Rintel wrote:
> Add binding document for the Dell Wyse 3020 a.k.a. "Ariel" Power Button.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> Reviewed-by: Rob Herring <robh@kernel.org>
> 
> ---
> Changes since v1:
> - Collect Rob's R-b
> 
>  .../bindings/input/ariel-pwrbutton.yaml       | 53 +++++++++++++++++++
>  1 file changed, 53 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml: 'oneOf' conditional failed, one must be fixed:
	'unevaluatedProperties' is a required property
	'additionalProperties' is a required property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml: ignoring, error in schema: 
warning: no schema found in file: ./Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml


See https://patchwork.ozlabs.org/patch/1407831

The base for the patch is generally the last rc1. Any dependencies
should be noted.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
new file mode 100644
index 0000000000000..e022d36c48d23
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
@@ -0,0 +1,53 @@ 
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ariel-pwrbutton.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dell Wyse 3020 a.k.a. "Ariel" Power Button
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+description: |
+  The ENE Embedded Controller on the Ariel board has an interface to the
+  SPI bus that is capable of sending keyboard and mouse data. A single
+  power button is attached to it. This binding describes this
+  configuration.
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: dell,wyse-ariel-ec-input
+      - const: ene,kb3930-input
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-button@0 {
+            compatible = "dell,wyse-ariel-ec-input", "ene,kb3930-input";
+            reg = <0>;
+            interrupt-parent = <&gpio>;
+            interrupts = <60 IRQ_TYPE_EDGE_RISING>;
+            spi-max-frequency = <33000000>;
+        };
+    };