diff mbox series

[5/6] dt-bindings: iio: scd30: add device binding file

Message ID 20200422141135.86419-6-tomasz.duszynski@octakon.com
State Changes Requested, archived
Headers show
Series Add support for SCD30 sensor | expand

Checks

Context Check Description
robh/dt-meta-schema fail build log

Commit Message

Tomasz Duszynski April 22, 2020, 2:11 p.m. UTC 
Add SCD30 sensor binding file.

Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
---
 .../iio/chemical/sensirion,scd30.yaml         | 71 +++++++++++++++++++
 1 file changed, 71 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml

Comments

Jonathan Cameron April 25, 2020, 7:23 p.m. UTC | #1 
On Wed, 22 Apr 2020 16:11:34 +0200
Tomasz Duszynski <tomasz.duszynski@octakon.com> wrote:

> Add SCD30 sensor binding file.
> 
> Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
> ---
>  .../iio/chemical/sensirion,scd30.yaml         | 71 +++++++++++++++++++
>  1 file changed, 71 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
> new file mode 100644
> index 000000000000..b092b2530c76
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
> @@ -0,0 +1,71 @@
> +# SPDX-License-Identifier: GPL-2.0

Dual license preferred with BSD for bindings.

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/chemical/sensirion,scd30.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sensirion SCD30 carbon dioxide sensor
> +
> +maintainers:
> +  - Tomasz Duszynski <tomasz.duszynski@octakon.com>
> +
> +description: |
> +  Air quality sensor capable of measuring co2 concentration, temperature
> +  and relative humidity.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - sensirion,scd30
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  vdd-supply: true
> +
> +  sensirion,sel-gpios:
> +    description: GPIO connected to the SEL line
> +    maxItems: 1
> +
> +  sensirion,pwm-gpios:
> +    description: GPIO connected to the PWM line
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - vdd-supply

Only enable it I think in the driver.  Should be fine with a stub regulator
as provided if we don't specify one in the dt binding because it's not
controllable and we are lazy.

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    # include <dt-bindings/gpio/gpio.h>
> +    # include <dt-bindings/interrupt-controller/irq.h>
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      scd30@61 {
> +        compatible = "sensirion,scd30";
> +        reg = <0x61>;
> +        vdd-supply = <&vdd>;
> +        interrupt-parrent = <&gpio0>;
> +        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +      };
> +    };
> +  - |
> +    # include <dt-bindings/gpio/gpio.h>

Why gpio?

> +    # include <dt-bindings/interrupt-controller/irq.h>
> +    serial {
> +      scd30 {
> +        compatible = "sensirion,scd30";
> +        vdd-supply = <&vdd>;
> +        interrupt-parrent = <&gpio0>;
> +        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +      };
> +    };
> +
> +...
Tomasz Duszynski April 26, 2020, 8:28 a.m. UTC | #2 
On Sat, Apr 25, 2020 at 08:23:41PM +0100, Jonathan Cameron wrote:
> On Wed, 22 Apr 2020 16:11:34 +0200
> Tomasz Duszynski <tomasz.duszynski@octakon.com> wrote:
>
> > Add SCD30 sensor binding file.
> >
> > Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
> > ---
> >  .../iio/chemical/sensirion,scd30.yaml         | 71 +++++++++++++++++++
> >  1 file changed, 71 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
> > new file mode 100644
> > index 000000000000..b092b2530c76
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
> > @@ -0,0 +1,71 @@
> > +# SPDX-License-Identifier: GPL-2.0
>
> Dual license preferred with BSD for bindings.
>

Okay.

> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/chemical/sensirion,scd30.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Sensirion SCD30 carbon dioxide sensor
> > +
> > +maintainers:
> > +  - Tomasz Duszynski <tomasz.duszynski@octakon.com>
> > +
> > +description: |
> > +  Air quality sensor capable of measuring co2 concentration, temperature
> > +  and relative humidity.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - sensirion,scd30
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  vdd-supply: true
> > +
> > +  sensirion,sel-gpios:
> > +    description: GPIO connected to the SEL line
> > +    maxItems: 1
> > +
> > +  sensirion,pwm-gpios:
> > +    description: GPIO connected to the PWM line
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - vdd-supply
>
> Only enable it I think in the driver.  Should be fine with a stub regulator
> as provided if we don't specify one in the dt binding because it's not
> controllable and we are lazy.
>
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    # include <dt-bindings/gpio/gpio.h>
> > +    # include <dt-bindings/interrupt-controller/irq.h>
> > +    i2c {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +
> > +      scd30@61 {
> > +        compatible = "sensirion,scd30";
> > +        reg = <0x61>;
> > +        vdd-supply = <&vdd>;
> > +        interrupt-parrent = <&gpio0>;
> > +        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> > +      };
> > +    };
> > +  - |
> > +    # include <dt-bindings/gpio/gpio.h>
>
> Why gpio?
>

That shouldn't be here. I have some local changes where I use sel-gpios hence
this include.

> > +    # include <dt-bindings/interrupt-controller/irq.h>
> > +    serial {
> > +      scd30 {
> > +        compatible = "sensirion,scd30";
> > +        vdd-supply = <&vdd>;
> > +        interrupt-parrent = <&gpio0>;
> > +        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> > +      };
> > +    };
> > +
> > +...
>
Rob Herring April 27, 2020, 9:28 p.m. UTC | #3 
On Wed, 22 Apr 2020 16:11:34 +0200, Tomasz Duszynski wrote:
> Add SCD30 sensor binding file.
> 
> Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
> ---
>  .../iio/chemical/sensirion,scd30.yaml         | 71 +++++++++++++++++++
>  1 file changed, 71 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.example.dt.yaml: scd30@61: 'interrupt-parrent' does not match any of the regexes: 'pinctrl-[0-9]+'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.example.dt.yaml: scd30: 'interrupt-parrent' does not match any of the regexes: 'pinctrl-[0-9]+'

See https://patchwork.ozlabs.org/patch/1275131

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.
Tomasz Duszynski April 28, 2020, 8:10 a.m. UTC | #4 
On Mon, Apr 27, 2020 at 04:28:26PM -0500, Rob Herring wrote:
> On Wed, 22 Apr 2020 16:11:34 +0200, Tomasz Duszynski wrote:
> > Add SCD30 sensor binding file.
> >
> > Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
> > ---
> >  .../iio/chemical/sensirion,scd30.yaml         | 71 +++++++++++++++++++
> >  1 file changed, 71 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
> >
>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.example.dt.yaml: scd30@61: 'interrupt-parrent' does not match any of the regexes: 'pinctrl-[0-9]+'
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.example.dt.yaml: scd30: 'interrupt-parrent' does not match any of the regexes: 'pinctrl-[0-9]+'

Well, a typo here.

>
> See https://patchwork.ozlabs.org/patch/1275131
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure dt-schema is up to date:
>
> pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
>
> Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
new file mode 100644
index 000000000000..b092b2530c76
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
@@ -0,0 +1,71 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/sensirion,scd30.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SCD30 carbon dioxide sensor
+
+maintainers:
+  - Tomasz Duszynski <tomasz.duszynski@octakon.com>
+
+description: |
+  Air quality sensor capable of measuring co2 concentration, temperature
+  and relative humidity.
+
+properties:
+  compatible:
+    enum:
+      - sensirion,scd30
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+  sensirion,sel-gpios:
+    description: GPIO connected to the SEL line
+    maxItems: 1
+
+  sensirion,pwm-gpios:
+    description: GPIO connected to the PWM line
+    maxItems: 1
+
+required:
+  - compatible
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    # include <dt-bindings/gpio/gpio.h>
+    # include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      scd30@61 {
+        compatible = "sensirion,scd30";
+        reg = <0x61>;
+        vdd-supply = <&vdd>;
+        interrupt-parrent = <&gpio0>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
+  - |
+    # include <dt-bindings/gpio/gpio.h>
+    # include <dt-bindings/interrupt-controller/irq.h>
+    serial {
+      scd30 {
+        compatible = "sensirion,scd30";
+        vdd-supply = <&vdd>;
+        interrupt-parrent = <&gpio0>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
+
+...