[1/1] configs: ls1012ardb: secure boot: Add PFE config
diff mbox series

Message ID 20200221002704.12664-2-priyanka.singh@nxp.com
State Awaiting Upstream
Delegated to: Priyanka Jain
Headers show
Series
  • [1/1] configs: ls1012ardb: secure boot: Add PFE config
Related show

Commit Message

Priyanka Singh Feb. 21, 2020, 12:27 a.m. UTC
Add config to enable the PFE, ETH and MMC HS200 support.
Also change the pfe secure boot header address.

Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
---
 board/freescale/ls1012ardb/Kconfig           | 2 +-
 configs/ls1012ardb_tfa_SECURE_BOOT_defconfig | 3 +++
 2 files changed, 4 insertions(+), 1 deletion(-)

Comments

Priyanka Jain (OSS) March 30, 2020, 12:22 p.m. UTC | #1
>-----Original Message-----
>From: U-Boot <u-boot-bounces@lists.denx.de> On Behalf Of Priyanka Singh
>Sent: Friday, February 21, 2020 5:57 AM
>To: u-boot@lists.denx.de
>Cc: Ruchika Gupta <ruchika.gupta@nxp.com>; Udit Agarwal
><udit.agarwal@nxp.com>; Priyanka Singh <priyanka.singh@nxp.com>
>Subject: [PATCH 1/1] configs: ls1012ardb: secure boot: Add PFE config
>
>Add config to enable the PFE, ETH and MMC HS200 support.
>Also change the pfe secure boot header address.
>
>Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
>---
Applied to u-boot-fsl-qoriq after rebasing and removing HS200 enablement . Waiting upstream

Thanks
Priyanka

Patch
diff mbox series

diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig
index 51efd0fa37..dea9ba5d2f 100644
--- a/board/freescale/ls1012ardb/Kconfig
+++ b/board/freescale/ls1012ardb/Kconfig
@@ -35,7 +35,7 @@  config SYS_LS_PFE_FW_ADDR
 
 config SYS_LS_PFE_ESBC_ADDR
 	hex "PFE Firmware HDR Addr"
-	default 0x40700000
+	default 0x40640000
 
 config DDR_PFE_PHYS_BASEADDR
 	hex "PFE DDR physical base address"
diff --git a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
index 342fac6083..2330105852 100644
--- a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
@@ -60,3 +60,6 @@  CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_DM_I2C=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_RTC=y
+CONFIG_MMC_HS200_SUPPORT=y
+CONFIG_FSL_PFE=y
+CONFIG_DM_ETH=y