diff mbox series

[v6,11/30] PCI: hotplug: movable BARs: Try to assign unassigned resources only once

Message ID 20191024171228.877974-12-s.miroshnichenko@yadro.com
State New
Delegated to: Bjorn Helgaas
Headers show
Series PCI: Allow BAR movement during hotplug | expand

Commit Message

Sergei Miroshnichenko Oct. 24, 2019, 5:12 p.m. UTC 
With enabled BAR movement, BARs and bridge windows can only be assigned to
their direct parents, so there can be only one variant of resource tree,
thus every retry within the pci_assign_unassigned_root_bus_resources() will
result in the same tree, and it is enough to try just once.

In case of failures the pci_reassign_root_bus_resources() disables BARs for
one of the hotplugged devices and tries the assignment again.

Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
---
 drivers/pci/setup-bus.c | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index cf325daae1b1..3deb1c343e89 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1819,6 +1819,13 @@  void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus)
 	int pci_try_num = 1;
 	enum enable_type enable_local;
 
+	if (pci_can_move_bars) {
+		__pci_bus_size_bridges(bus, NULL);
+		__pci_bus_assign_resources(bus, NULL, NULL);
+
+		goto dump;
+	}
+
 	/* Don't realloc if asked to do so */
 	enable_local = pci_realloc_detect(bus, pci_realloc_enable);
 	if (pci_realloc_enabled(enable_local)) {