diff mbox series

[1/3] PCI: pciehp: Add support for disabling in-band presence

Message ID 20191009200523.8436-2-stuart.w.hayes@gmail.com
State Superseded
Delegated to: Bjorn Helgaas
Headers show
Series PCI: pciehp: Do not turn off slot if presence comes up after link | expand

Commit Message

Stuart Hayes Oct. 9, 2019, 8:05 p.m. UTC 
From: Alexandru Gagniuc <mr.nuke.me@gmail.com>

The presence detect state (PDS) is normally a logical or of in-band and
out-of-band presence. As of PCIe 4.0, there is the option to disable
in-band presence so that the PDS bit always reflects the state of the
out-of-band presence.

The recommendation of the PCIe spec is to disable in-band presence
whenever supported.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
---
 drivers/pci/hotplug/pciehp.h     | 1 +
 drivers/pci/hotplug/pciehp_hpc.c | 9 ++++++++-
 include/uapi/linux/pci_regs.h    | 2 ++
 3 files changed, 11 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 654c972b8ea0..27e4cd6529b0 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -83,6 +83,7 @@  struct controller {
 	struct pcie_device *pcie;
 
 	u32 slot_cap;				/* capabilities and quirks */
+	unsigned int inband_presence_disabled:1;
 
 	u16 slot_ctrl;				/* control register access */
 	struct mutex ctrl_lock;
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 1a522c1c4177..dc109d521f30 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -811,7 +811,7 @@  static inline void dbg_ctrl(struct controller *ctrl)
 struct controller *pcie_init(struct pcie_device *dev)
 {
 	struct controller *ctrl;
-	u32 slot_cap, link_cap;
+	u32 slot_cap, slot_cap2, link_cap;
 	u8 poweron;
 	struct pci_dev *pdev = dev->port;
 	struct pci_bus *subordinate = pdev->subordinate;
@@ -869,6 +869,13 @@  struct controller *pcie_init(struct pcie_device *dev)
 		FLAG(link_cap, PCI_EXP_LNKCAP_DLLLARC),
 		pdev->broken_cmd_compl ? " (with Cmd Compl erratum)" : "");
 
+	pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP2, &slot_cap2);
+	if (slot_cap2 & PCI_EXP_SLTCAP2_IBPD) {
+		pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_IBPD_DISABLE,
+				      PCI_EXP_SLTCTL_IBPD_DISABLE);
+		ctrl->inband_presence_disabled = 1;
+	}
+
 	/*
 	 * If empty slot's power status is on, turn power off.  The IRQ isn't
 	 * requested yet, so avoid triggering a notification with this command.
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index 29d6e93fd15e..ea1cf9546e4d 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -604,6 +604,7 @@ 
 #define  PCI_EXP_SLTCTL_PWR_OFF        0x0400 /* Power Off */
 #define  PCI_EXP_SLTCTL_EIC	0x0800	/* Electromechanical Interlock Control */
 #define  PCI_EXP_SLTCTL_DLLSCE	0x1000	/* Data Link Layer State Changed Enable */
+#define  PCI_EXP_SLTCTL_IBPD_DISABLE	0x4000 /* In-band PD disable */
 #define PCI_EXP_SLTSTA		26	/* Slot Status */
 #define  PCI_EXP_SLTSTA_ABP	0x0001	/* Attention Button Pressed */
 #define  PCI_EXP_SLTSTA_PFD	0x0002	/* Power Fault Detected */
@@ -676,6 +677,7 @@ 
 #define PCI_EXP_LNKSTA2		50	/* Link Status 2 */
 #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2	52	/* v2 endpoints with link end here */
 #define PCI_EXP_SLTCAP2		52	/* Slot Capabilities 2 */
+#define  PCI_EXP_SLTCAP2_IBPD	0x0001	/* In-band PD Disable Supported */
 #define PCI_EXP_SLTCTL2		56	/* Slot Control 2 */
 #define PCI_EXP_SLTSTA2		58	/* Slot Status 2 */