diff mbox series

[1/2] PCI: tegra: Fix CLKREQ dependency programming

Message ID 20191005164212.3646-1-vidyas@nvidia.com
State Accepted
Delegated to: Lorenzo Pieralisi
Headers show
Series [1/2] PCI: tegra: Fix CLKREQ dependency programming | expand

Commit Message

Vidya Sagar Oct. 5, 2019, 4:42 p.m. UTC
Corrects the programming to provide REFCLK to the downstream device
when there is no CLKREQ sideband signal routing present from root port
to the endpont.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
---
 drivers/pci/controller/dwc/pcie-tegra194.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

Comments

Thierry Reding Oct. 16, 2019, 4:19 p.m. UTC | #1
On Sat, Oct 05, 2019 at 10:12:11PM +0530, Vidya Sagar wrote:
> Corrects the programming to provide REFCLK to the downstream device
> when there is no CLKREQ sideband signal routing present from root port
> to the endpont.
> 
> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
> ---
>  drivers/pci/controller/dwc/pcie-tegra194.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> index f89f5acee72d..cbe95f0ea0ca 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> @@ -40,8 +40,6 @@
>  #define APPL_PINMUX_CLKREQ_OVERRIDE		BIT(3)
>  #define APPL_PINMUX_CLK_OUTPUT_IN_OVERRIDE_EN	BIT(4)
>  #define APPL_PINMUX_CLK_OUTPUT_IN_OVERRIDE	BIT(5)
> -#define APPL_PINMUX_CLKREQ_OUT_OVRD_EN		BIT(9)
> -#define APPL_PINMUX_CLKREQ_OUT_OVRD		BIT(10)
>  
>  #define APPL_CTRL				0x4
>  #define APPL_CTRL_SYS_PRE_DET_STATE		BIT(6)
> @@ -1193,8 +1191,8 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie,
>  
>  	if (!pcie->supports_clkreq) {
>  		val = appl_readl(pcie, APPL_PINMUX);
> -		val |= APPL_PINMUX_CLKREQ_OUT_OVRD_EN;
> -		val |= APPL_PINMUX_CLKREQ_OUT_OVRD;
> +		val |= APPL_PINMUX_CLKREQ_OVERRIDE_EN;
> +		val &= ~APPL_PINMUX_CLKREQ_OVERRIDE;
>  		appl_writel(pcie, val, APPL_PINMUX);
>  	}

If we do support CLKREQ, do we have to explicitly set the OVERRIDE bit?
Or clear the OVERRIDE_EN bit? Is it always guaranteed that the defaults
(OVERRIDE_EN = 0) is applied at this point?

That's an issue that's orthogonal to this patch, though, so for this
one:

Acked-by: Thierry Reding <treding@nvidia.com>
Lorenzo Pieralisi Oct. 18, 2019, 9:01 a.m. UTC | #2
On Sat, Oct 05, 2019 at 10:12:11PM +0530, Vidya Sagar wrote:
> Corrects the programming to provide REFCLK to the downstream device
> when there is no CLKREQ sideband signal routing present from root port
> to the endpont.
> 
> Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
> ---
>  drivers/pci/controller/dwc/pcie-tegra194.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)

Applied to pci/tegra, thanks.

Lorenzo

> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> index f89f5acee72d..cbe95f0ea0ca 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> @@ -40,8 +40,6 @@
>  #define APPL_PINMUX_CLKREQ_OVERRIDE		BIT(3)
>  #define APPL_PINMUX_CLK_OUTPUT_IN_OVERRIDE_EN	BIT(4)
>  #define APPL_PINMUX_CLK_OUTPUT_IN_OVERRIDE	BIT(5)
> -#define APPL_PINMUX_CLKREQ_OUT_OVRD_EN		BIT(9)
> -#define APPL_PINMUX_CLKREQ_OUT_OVRD		BIT(10)
>  
>  #define APPL_CTRL				0x4
>  #define APPL_CTRL_SYS_PRE_DET_STATE		BIT(6)
> @@ -1193,8 +1191,8 @@ static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie,
>  
>  	if (!pcie->supports_clkreq) {
>  		val = appl_readl(pcie, APPL_PINMUX);
> -		val |= APPL_PINMUX_CLKREQ_OUT_OVRD_EN;
> -		val |= APPL_PINMUX_CLKREQ_OUT_OVRD;
> +		val |= APPL_PINMUX_CLKREQ_OVERRIDE_EN;
> +		val &= ~APPL_PINMUX_CLKREQ_OVERRIDE;
>  		appl_writel(pcie, val, APPL_PINMUX);
>  	}
>  
> -- 
> 2.17.1
>
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index f89f5acee72d..cbe95f0ea0ca 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -40,8 +40,6 @@ 
 #define APPL_PINMUX_CLKREQ_OVERRIDE		BIT(3)
 #define APPL_PINMUX_CLK_OUTPUT_IN_OVERRIDE_EN	BIT(4)
 #define APPL_PINMUX_CLK_OUTPUT_IN_OVERRIDE	BIT(5)
-#define APPL_PINMUX_CLKREQ_OUT_OVRD_EN		BIT(9)
-#define APPL_PINMUX_CLKREQ_OUT_OVRD		BIT(10)
 
 #define APPL_CTRL				0x4
 #define APPL_CTRL_SYS_PRE_DET_STATE		BIT(6)
@@ -1193,8 +1191,8 @@  static int tegra_pcie_config_controller(struct tegra_pcie_dw *pcie,
 
 	if (!pcie->supports_clkreq) {
 		val = appl_readl(pcie, APPL_PINMUX);
-		val |= APPL_PINMUX_CLKREQ_OUT_OVRD_EN;
-		val |= APPL_PINMUX_CLKREQ_OUT_OVRD;
+		val |= APPL_PINMUX_CLKREQ_OVERRIDE_EN;
+		val &= ~APPL_PINMUX_CLKREQ_OVERRIDE;
 		appl_writel(pcie, val, APPL_PINMUX);
 	}