diff mbox series

[U-Boot,05/13] arm64: zynqmp: add firmware and mailbox node to DT

Message ID 80acbadf89b95ea527bbba5c8cce1808cc31bff7.1569591296.git.michal.simek@xilinx.com
State Deferred
Headers show
Series arm64: zynqmp: Clean communication with PMUFW | expand

Commit Message

Michal Simek Sept. 27, 2019, 1:34 p.m. UTC 
From: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>

The following patch adds a mailbox node and firmware node to following the
mainline DT.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 arch/arm/dts/zynqmp.dtsi | 44 +++++++++++++++++++++++++++++++++++-----
 1 file changed, 39 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index dfb6ebc64ce5..8e35171dd01d 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -96,6 +96,29 @@ 
 		};
 	};
 
+	zynqmp_ipi {
+		u-boot,dm-pre-reloc;
+		compatible = "xlnx,zynqmp-ipi-mailbox";
+		interrupt-parent = <&gic>;
+		interrupts = <0 35 4>;
+		xlnx,ipi-id = <0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipi_mailbox_pmu1: mailbox@ff990400 {
+			u-boot,dm-pre-reloc;
+			reg = <0x0 0xff9905c0 0x0 0x20>,
+			      <0x0 0xff9905e0 0x0 0x20>,
+			      <0x0 0xff990e80 0x0 0x20>,
+			      <0x0 0xff990ea0 0x0 0x20>;
+			reg-names = "local_request_region" , "local_response_region",
+				    "remote_request_region", "remote_response_region";
+			#mbox-cells = <1>;
+			xlnx,ipi-id = <4>;
+		};
+	};
+
 	dcc: dcc {
 		compatible = "arm,dcc";
 		status = "disabled";
@@ -116,11 +139,22 @@ 
 		method = "smc";
 	};
 
-	pmufw: firmware {
-		compatible = "xlnx,zynqmp-pm";
-		method = "smc";
-		interrupt-parent = <&gic>;
-		interrupts = <0 35 4>;
+	firmware {
+		zynqmp-firmware {
+			compatible = "xlnx,zynqmp-firmware";
+			method = "smc";
+			#power-domain-cells = <0x1>;
+			u-boot,dm-pre-reloc;
+
+			zynqmp_power: zynqmp-power {
+				u-boot,dm-pre-reloc;
+				compatible = "xlnx,zynqmp-power";
+				interrupt-parent = <&gic>;
+				interrupts = <0 35 4>;
+				mboxes = <&ipi_mailbox_pmu1 0>, <&ipi_mailbox_pmu1 1>;
+				mbox-names = "tx", "rx";
+			};
+		};
 	};
 
 	timer {