diff --git a/.cirrus.yml b/.cirrus.yml
index eb6af0a719c8..bae5a089b248 100644
--- a/.cirrus.yml
+++ b/.cirrus.yml
@@ -9,8 +9,7 @@ freebsd_build_task:
 
   env:
     DEPENDENCIES: automake libtool gmake gcc wget openssl
-                  python py27-six py27-sphinx py27-openssl
-                  python3 py36-six py36-openssl
+                  python3 py36-six py36-openssl p36-sphinx
     matrix:
       COMPILER: gcc
       COMPILER: clang
diff --git a/.travis/osx-prepare.sh b/.travis/osx-prepare.sh
index 58ccb67cddbd..78d5bb579217 100755
--- a/.travis/osx-prepare.sh
+++ b/.travis/osx-prepare.sh
@@ -1,4 +1,4 @@
 #!/bin/bash
 set -ev
-pip2 install --user six
-pip2 install --user --upgrade docutils
+pip3 install --user six
+pip3 install --user --upgrade docutils
diff --git a/Documentation/intro/install/fedora.rst b/Documentation/intro/install/fedora.rst
index f11d05a01041..6fe1fb5b2468 100644
--- a/Documentation/intro/install/fedora.rst
+++ b/Documentation/intro/install/fedora.rst
@@ -102,7 +102,7 @@ in which `./configure` was executed:
 
     $ make rpm-fedora
 
-This will create the RPMs `openvswitch`, `python-openvswitch`,
+This will create the RPMs `openvswitch`, `python3-openvswitch`,
 `openvswitch-test`, `openvswitch-devel` and `openvswitch-debuginfo`.
 
 To enable DPDK support in the openvswitch package, the ``--with dpdk`` option
@@ -151,7 +151,7 @@ Refer to the :doc:`/faq/index` for more information about the various Open
 vSwitch datapath options.
 
 In most cases only the `openvswitch` RPM will need to be installed. The
-`python-openvswitch`, `openvswitch-test`, `openvswitch-devel`, and
+`python3-openvswitch`, `openvswitch-test`, `openvswitch-devel`, and
 `openvswitch-debuginfo` RPMs are optional unless required for a specific
 purpose.
 
diff --git a/Documentation/intro/install/general.rst b/Documentation/intro/install/general.rst
index b03d70f6fa6e..e62501be7fc1 100644
--- a/Documentation/intro/install/general.rst
+++ b/Documentation/intro/install/general.rst
@@ -90,8 +90,8 @@ need the following software:
   If libcap-ng is installed, then Open vSwitch will automatically build with
   support for it.
 
-- Python 2.7. You must also have the Python ``six`` library version 1.4.0
-  or later.
+- Python 3.4 or later. You must also have the Python ``six`` library
+  version 1.4.0 or later.
 
 - Unbound library, from http://www.unbound.net, is optional but recommended if
   you want to enable ovs-vswitchd and other utilities to use DNS names when
@@ -203,8 +203,8 @@ simply install and run Open vSwitch you require the following software:
   from iproute2 (part of all major distributions and available at
   https://wiki.linuxfoundation.org/networking/iproute2).
 
-- Python 2.7. You must also have the Python six library version 1.4.0
-  or later.
+- Python 3.4 or later. You must also have the Python six library
+  version 1.4.0 or later.
 
 On Linux you should ensure that ``/dev/urandom`` exists. To support TAP
 devices, you must also ensure that ``/dev/net/tun`` exists.
diff --git a/Documentation/intro/install/netbsd.rst b/Documentation/intro/install/netbsd.rst
index 7eb7f0cebbaf..4f60dad869b6 100644
--- a/Documentation/intro/install/netbsd.rst
+++ b/Documentation/intro/install/netbsd.rst
@@ -31,20 +31,18 @@ you need at least the following packages.
 - automake
 - libtool-base
 - gmake
-- python27
-- py27-six
-- py27-xml
+- python37
+- py37-six
 
 Some components have additional requirements. Refer to :doc:`general` for more
 information.
 
-Assuming you are running NetBSD/amd64 6.1.2, you can download and install
+Assuming you are running NetBSD/amd64 7.0.2, you can download and install
 pre-built binary packages as the following::
 
     $ PKG_PATH=http://ftp.netbsd.org/pub/pkgsrc/packages/NetBSD/amd64/7.0.2/All/
     $ export PKG_PATH
-    $ pkg_add automake libtool-base gmake python27 py27-six py27-xml \
-        pkg_alternatives
+    $ pkg_add automake libtool-base gmake python37 py37-six pkg_alternatives
 
 .. note::
   You might get some warnings about minor version mismatch. These can be safely
diff --git a/Documentation/intro/install/rhel.rst b/Documentation/intro/install/rhel.rst
index 0e5ca2743ef5..17b3bc26f11d 100644
--- a/Documentation/intro/install/rhel.rst
+++ b/Documentation/intro/install/rhel.rst
@@ -92,7 +92,7 @@ Once that is completed, remove the file ``/tmp/ovs.spec``.
 If python3-sphinx package is not available in your version of RHEL, you can
 install it via pip with 'pip install sphinx'.
 
-Open vSwitch requires python 2.7 or newer which is not available in older
+Open vSwitch requires python 3.4 or newer which is not available in older
 distributions. In the case of RHEL 6.x and its derivatives, one option is
 to install python34 and python34-six from `EPEL`_.
 
diff --git a/Documentation/intro/install/windows.rst b/Documentation/intro/install/windows.rst
index f696d2c9b621..019e83e64425 100644
--- a/Documentation/intro/install/windows.rst
+++ b/Documentation/intro/install/windows.rst
@@ -56,9 +56,9 @@ The following explains the steps in some detail.
 
       'C:/MinGW /mingw'.
 
-- Python
+- Python 3.4 or later.
 
-  Install the latest Python 2.x from python.org and verify that its path is
+  Install the latest Python 3.x from python.org and verify that its path is
   part of Windows' PATH environment variable.
   We require that you have Python six and pypiwin32 libraries installed.
   The libraries can be installed via pip command:
diff --git a/Documentation/intro/install/xenserver.rst b/Documentation/intro/install/xenserver.rst
index c0f5e3156697..366e11ac27ad 100644
--- a/Documentation/intro/install/xenserver.rst
+++ b/Documentation/intro/install/xenserver.rst
@@ -30,8 +30,8 @@ XenServer host.  If you want to install Open vSwitch on a generic Linux or BSD
 host, refer to :doc:`general` instead.
 
 Open vSwitch should work with XenServer 5.6.100 and later.  However, Open
-vSwitch requires Python 2.7 or later, so using Open vSwitch with XenServer 6.5
-or earlier requires installing Python 2.7.
+vSwitch requires Python 3.4 or later, so using Open vSwitch with XenServer 6.5
+or earlier requires installing Python 3.x.
 
 Building
 --------
diff --git a/Makefile.am b/Makefile.am
index ff1f94b4841f..6030cdb495d6 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -60,7 +60,7 @@ endif
 # foo/__init__.pyc will cause Python to ignore foo.py.
 run_python = \
 	PYTHONPATH=$(top_srcdir)/python$(psep)$$PYTHONPATH \
-	PYTHONDONTWRITEBYTECODE=yes $(PYTHON)
+	PYTHONDONTWRITEBYTECODE=yes $(PYTHON3)
 
 ALL_LOCAL =
 BUILT_SOURCES =
@@ -147,13 +147,13 @@ ro_shell = printf '\043 Generated automatically -- do not modify!    -*- buffer-
 
 SUFFIXES += .in
 .in:
-	$(AM_V_GEN)PYTHONPATH=$$PYTHONPATH$(psep)$(srcdir)/python $(PYTHON) $(srcdir)/build-aux/soexpand.py -I$(srcdir) < $< | \
-	  $(PYTHON) $(srcdir)/build-aux/dpdkstrip.py $(DPDKSTRIP_FLAGS) | \
+	$(AM_V_GEN)PYTHONPATH=$$PYTHONPATH$(psep)$(srcdir)/python $(PYTHON3) $(srcdir)/build-aux/soexpand.py -I$(srcdir) < $< | \
+	  $(PYTHON3) $(srcdir)/build-aux/dpdkstrip.py $(DPDKSTRIP_FLAGS) | \
 	  sed \
 	    -e 's,[@]PKIDIR[@],$(PKIDIR),g' \
 	    -e 's,[@]LOGDIR[@],$(LOGDIR),g' \
 	    -e 's,[@]DBDIR[@],$(DBDIR),g' \
-	    -e 's,[@]PYTHON[@],$(PYTHON),g' \
+	    -e 's,[@]PYTHON3[@],$(PYTHON3),g' \
 	    -e 's,[@]RUNDIR[@],$(RUNDIR),g' \
 	    -e 's,[@]VERSION[@],$(VERSION),g' \
 	    -e 's,[@]localstatedir[@],$(localstatedir),g' \
@@ -177,7 +177,7 @@ SUFFIXES += .xml
 	  PKIDIR='$(PKIDIR)' \
 	  LOGDIR='$(LOGDIR)' \
 	  DBDIR='$(DBDIR)' \
-	  PYTHON='$(PYTHON)' \
+	  PYTHON3='$(PYTHON3)' \
 	  RUNDIR='$(RUNDIR)' \
 	  VERSION='$(VERSION)' \
 	  localstatedir='$(localstatedir)' \
@@ -414,7 +414,7 @@ CLEANFILES += flake8-check
 
 include $(srcdir)/manpages.mk
 $(srcdir)/manpages.mk: $(MAN_ROOTS) build-aux/sodepends.py python/build/soutil.py
-	@PYTHONPATH=$$PYTHONPATH$(psep)$(srcdir)/python $(PYTHON) $(srcdir)/build-aux/sodepends.py -I. -I$(srcdir) $(MAN_ROOTS) >$(@F).tmp
+	@PYTHONPATH=$$PYTHONPATH$(psep)$(srcdir)/python $(PYTHON3) $(srcdir)/build-aux/sodepends.py -I. -I$(srcdir) $(MAN_ROOTS) >$(@F).tmp
 	@if cmp -s $(@F).tmp $@; then \
 	  touch $@; \
 	  rm -f $(@F).tmp; \
diff --git a/Vagrantfile b/Vagrantfile
index fbd772a1bec5..236e3a7bdcb7 100644
--- a/Vagrantfile
+++ b/Vagrantfile
@@ -8,12 +8,14 @@ Vagrant.require_version ">=1.7.0"
 $bootstrap_fedora = <<SCRIPT
 dnf -y update
 dnf -y install autoconf automake openssl-devel libtool \
-               python-devel python3-devel \
-               python-twisted python-zope-interface \
+               python3-devel \
+               python3-twisted python3-zope-interface \
                desktop-file-utils groff graphviz rpmdevtools nc curl \
-               wget python-six pyftpdlib checkpolicy selinux-policy-devel \
-               libcap-ng-devel kernel-devel-`uname -r` ethtool python-tftpy \
+               wget python3-six python3-pyftpdlib checkpolicy \
+               selinux-policy-devel \
+               libcap-ng-devel kernel-devel-`uname -r` ethtool python3-pip \
                lftp
+pip-3 install tftpy             # Not yet available for Python3 via dnf.
 echo "search extra update built-in" >/etc/depmod.d/search_path.conf
 SCRIPT
 
@@ -24,21 +26,23 @@ aptitude -y install -R \
                 build-essential dpkg-dev lintian devscripts fakeroot \
                 debhelper dh-autoreconf uuid-runtime \
                 autoconf automake libtool \
-                python-all python-twisted-core python-twisted-conch \
+                python3-all python3-twisted-core python3-twisted-conch \
                 xdg-utils groff graphviz netcat curl \
-                wget python-six ethtool \
-                libcap-ng-dev libssl-dev python-dev openssl \
-                python-pyftpdlib python-flake8 python-tftpy \
+                wget python3-six ethtool \
+                libcap-ng-dev libssl-dev python3-dev openssl \
+                python3-pyftpdlib python3-flake8 \
                 linux-headers-`uname -r` \
                 lftp
+pip-3 install tftpy             # Not yet available for Python3 via apt.
 SCRIPT
 
 $bootstrap_centos = <<SCRIPT
 yum -y update
 yum -y install autoconf automake openssl-devel libtool \
-               python-twisted-core python-zope-interface \
+               python3-twisted-core python3-zope-interface \
                desktop-file-utils groff graphviz rpmdevtools nc curl \
-               wget python-six pyftpdlib checkpolicy selinux-policy-devel \
+               wget python3-six python3-pyftpdlib checkpolicy \
+               selinux-policy-devel \
                libcap-ng-devel kernel-devel-`uname -r` ethtool net-tools \
                lftp
 SCRIPT
diff --git a/Vagrantfile-FreeBSD b/Vagrantfile-FreeBSD
index 52599eefaebe..d978faa1c2fe 100644
--- a/Vagrantfile-FreeBSD
+++ b/Vagrantfile-FreeBSD
@@ -12,7 +12,7 @@ Vagrant.require_version ">=1.7.0"
 $bootstrap_freebsd = <<SCRIPT
 sed  -e 's/\#DEFAULT_ALWAYS_YES = false/DEFAULT_ALWAYS_YES = true/g' -e 's/\#ASSUME_ALWAYS_YES = false/ASSUME_ALWAYS_YES = true/g' /usr/local/etc/pkg.conf > /tmp/pkg.conf
 mv -f /tmp/pkg.conf /usr/local/etc/pkg.conf
-pkg install automake libtool wget python py27-six gmake lftp
+pkg install automake libtool wget py37 py37-six gmake lftp
 SCRIPT
 
 $configure_ovs = <<SCRIPT
diff --git a/appveyor.yml b/appveyor.yml
index 2e5c37a37adc..b301227445d0 100644
--- a/appveyor.yml
+++ b/appveyor.yml
@@ -33,7 +33,7 @@ init:
 
     cd C:\openvswitch
 
-    python -m pip install six pypiwin32 --disable-pip-version-check
+    python3 -m pip install six pypiwin32 --disable-pip-version-check
 
 build_script:
 - '"C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\Tools\VsDevCmd"'
diff --git a/build-aux/check-structs b/build-aux/check-structs
index 37ffa06b3ab3..2c088b446943 100755
--- a/build-aux/check-structs
+++ b/build-aux/check-structs
@@ -1,4 +1,4 @@
-#! /usr/bin/python
+#! /usr/bin/python3
 
 import os.path
 import sys
diff --git a/build-aux/extract-ofp-actions b/build-aux/extract-ofp-actions
index 64de0f31f4a0..2d1dbe70973f 100755
--- a/build-aux/extract-ofp-actions
+++ b/build-aux/extract-ofp-actions
@@ -1,4 +1,4 @@
-#! /usr/bin/python
+#! /usr/bin/python3
 
 import getopt
 import sys
diff --git a/build-aux/extract-ofp-errors b/build-aux/extract-ofp-errors
index 03f40ea3e4c2..2c3fbfc881b1 100755
--- a/build-aux/extract-ofp-errors
+++ b/build-aux/extract-ofp-errors
@@ -1,4 +1,4 @@
-#! /usr/bin/python
+#! /usr/bin/python3
 
 import sys
 import os.path
diff --git a/build-aux/extract-ofp-fields b/build-aux/extract-ofp-fields
index 7a4e8e170171..8766995d9ab1 100755
--- a/build-aux/extract-ofp-fields
+++ b/build-aux/extract-ofp-fields
@@ -1,4 +1,4 @@
-#! /usr/bin/python
+#! /usr/bin/python3
 
 import getopt
 import sys
diff --git a/build-aux/extract-ofp-msgs b/build-aux/extract-ofp-msgs
index 3d50724aebd3..6b3295cf64c2 100755
--- a/build-aux/extract-ofp-msgs
+++ b/build-aux/extract-ofp-msgs
@@ -1,4 +1,4 @@
-#! /usr/bin/python
+#! /usr/bin/python3
 
 import sys
 import os.path
diff --git a/build-aux/sodepends.py b/build-aux/sodepends.py
index 90cfaa0f7fb4..45812bcbd700 100755
--- a/build-aux/sodepends.py
+++ b/build-aux/sodepends.py
@@ -1,4 +1,4 @@
-#! /usr/bin/env python
+#! /usr/bin/env python3
 
 # Copyright (c) 2008, 2011, 2017 Nicira, Inc.
 #
diff --git a/build-aux/soexpand.py b/build-aux/soexpand.py
index 53ca640739fe..00adcf47a356 100755
--- a/build-aux/soexpand.py
+++ b/build-aux/soexpand.py
@@ -1,4 +1,4 @@
-#! /usr/bin/env python
+#! /usr/bin/env python3
 
 # Copyright (c) 2008, 2017 Nicira, Inc.
 #
diff --git a/build-aux/text2c b/build-aux/text2c
index cb1f256f1775..dca58648b90c 100755
--- a/build-aux/text2c
+++ b/build-aux/text2c
@@ -1,4 +1,4 @@
-#! /usr/bin/python
+#! /usr/bin/python3
 
 import re
 import sys
diff --git a/build-aux/xml2nroff b/build-aux/xml2nroff
index bd4e87928e4f..ee5553f4564e 100755
--- a/build-aux/xml2nroff
+++ b/build-aux/xml2nroff
@@ -1,4 +1,4 @@
-#! /usr/bin/python
+#! /usr/bin/python3
 
 # Copyright (c) 2010, 2011, 2012, 2013, 2014, 2015, 2016 Nicira, Inc.
 #
diff --git a/configure.ac b/configure.ac
index 1d45c4fdd153..afd1e83450eb 100644
--- a/configure.ac
+++ b/configure.ac
@@ -92,9 +92,8 @@ OVS_CHECK_NETLINK
 OVS_CHECK_OPENSSL
 OVS_CHECK_LIBCAPNG
 OVS_CHECK_LOGDIR
-OVS_CHECK_PYTHON2
 OVS_CHECK_PYTHON3
-OVS_CHECK_PYTHON
+OVS_CHECK_SIX
 OVS_CHECK_FLAKE8
 OVS_CHECK_SPHINX
 OVS_CHECK_DOT
diff --git a/debian/.gitignore b/debian/.gitignore
index 441a8ffb702d..d02526b21fa7 100644
--- a/debian/.gitignore
+++ b/debian/.gitignore
@@ -23,4 +23,5 @@
 /openvswitch-testcontroller
 /openvswitch-vtep
 /python-openvswitch
+/python3-openvswitch
 /tmp
diff --git a/debian/automake.mk b/debian/automake.mk
index 03a1d68c2635..37b1a243390c 100644
--- a/debian/automake.mk
+++ b/debian/automake.mk
@@ -52,8 +52,8 @@ EXTRA_DIST += \
 	debian/openvswitch-vtep.init \
 	debian/openvswitch-vtep.install \
 	debian/openvswitch-vtep.manpages \
-	debian/python-openvswitch.dirs \
-	debian/python-openvswitch.install \
+	debian/python3-openvswitch.dirs \
+	debian/python3-openvswitch.install \
 	debian/rules \
 	debian/rules.modules \
 	debian/ifupdown.sh \
diff --git a/debian/control b/debian/control
index 2ad35f2cea6f..ad4b187860f3 100644
--- a/debian/control
+++ b/debian/control
@@ -13,10 +13,10 @@ Build-Depends: graphviz,
                libtool,
                openssl,
                procps,
-               python-all (>= 2.7),
-               python-twisted-conch,
-               python-zopeinterface,
-               python-six,
+               python3-all,
+               python3-twisted-conch,
+               python3-zopeinterface,
+               python3-six,
                libunbound-dev
 Standards-Version: 3.9.3
 Homepage: http://openvswitch.org/
@@ -41,7 +41,7 @@ Description: Open vSwitch datapath module source - module-assistant version
 
 Package: openvswitch-datapath-dkms
 Architecture: all
-Depends: dkms (>= 1.95), libc6-dev, libelf-dev, make, ${misc:Depends}, ${python:Depends}
+Depends: dkms (>= 1.95), libc6-dev, libelf-dev, make, ${misc:Depends}, ${python3:Depends}
 Description: Open vSwitch datapath module source - DKMS version
  Open vSwitch is a production quality, multilayer, software-based,
  Ethernet virtual switch. It is designed to enable massive network
@@ -58,8 +58,8 @@ Description: Open vSwitch datapath module source - DKMS version
 Package: openvswitch-common
 Architecture: linux-any
 Multi-Arch: foreign
-Depends: python (>= 2.7),
-         python-six,
+Depends: python3,
+         python3-six,
          libopenvswitch (= ${binary:Version}),
          ${misc:Depends},
          ${shlibs:Depends}
@@ -102,10 +102,9 @@ Depends: kmod | module-init-tools,
          netbase,
          openvswitch-common (= ${binary:Version}),
          procps,
-         python-argparse,
          uuid-runtime,
          ${misc:Depends},
-         ${python:Depends},
+         ${python3:Depends},
          ${shlibs:Depends}
 Description: Open vSwitch switch implementations
  Open vSwitch is a production quality, multilayer, software-based,
@@ -171,10 +170,10 @@ Description: Debug symbols for Open vSwitch packages
  packages.  Install it to debug one of them or to examine a core dump
  produced by one of them.
 
-Package: python-openvswitch
+Package: python3-openvswitch
 Architecture: all
 Section: python
-Depends: ${misc:Depends}, ${python:Depends}, python-six
+Depends: ${misc:Depends}, ${python3:Depends}, python3-six
 Description: Python bindings for Open vSwitch
  Open vSwitch is a production quality, multilayer, software-based,
  Ethernet virtual switch. It is designed to enable massive network
@@ -188,10 +187,10 @@ Description: Python bindings for Open vSwitch
 
 Package: openvswitch-test
 Architecture: all
-Depends: python (>= 2.7) | python-argparse,
-         python-twisted-web,
+Depends: python3,
+         python3-twisted-web,
          ${misc:Depends},
-         ${python:Depends}
+         ${python3:Depends}
 Description: Open vSwitch test package
  Open vSwitch is a production quality, multilayer, software-based,
  Ethernet virtual switch. It is designed to enable massive network
@@ -208,8 +207,8 @@ Package: openvswitch-vtep
 Architecture: linux-any
 Depends: openvswitch-common (>= ${binary:Version}),
          openvswitch-switch (>= ${binary:Version}),
-         python,
-         python-openvswitch (>= ${source:Version}),
+         python3,
+         python3-openvswitch (>= ${source:Version}),
          ${misc:Depends},
          ${shlibs:Depends}
 Description: Open vSwitch VTEP utilities
@@ -250,8 +249,8 @@ Architecture: linux-any
 Depends: iproute2,
          openvswitch-common (= ${binary:Version}),
          openvswitch-switch (= ${binary:Version}),
-         python,
-         python-openvswitch (= ${source:Version}),
+         python3,
+         python3-openvswitch (= ${source:Version}),
          strongswan,
          ${misc:Depends},
          ${shlibs:Depends}
diff --git a/debian/openvswitch-test.install b/debian/openvswitch-test.install
index 8a01a51259b7..cb371c906d94 100644
--- a/debian/openvswitch-test.install
+++ b/debian/openvswitch-test.install
@@ -1,3 +1,3 @@
 usr/bin/ovs-l3ping
 usr/bin/ovs-test
-usr/share/openvswitch/python/ovstest usr/lib/python2.7/dist-packages/
+usr/share/openvswitch/python/ovstest usr/lib/python3.7/dist-packages/
diff --git a/debian/python-openvswitch.install b/debian/python-openvswitch.install
deleted file mode 100644
index 0472d413f627..000000000000
--- a/debian/python-openvswitch.install
+++ /dev/null
@@ -1 +0,0 @@
-usr/share/openvswitch/python/ovs usr/lib/python2.7/dist-packages/
diff --git a/debian/python-openvswitch.dirs b/debian/python3-openvswitch.dirs
similarity index 100%
rename from debian/python-openvswitch.dirs
rename to debian/python3-openvswitch.dirs
diff --git a/debian/python3-openvswitch.install b/debian/python3-openvswitch.install
new file mode 100644
index 000000000000..7ba956e3be63
--- /dev/null
+++ b/debian/python3-openvswitch.install
@@ -0,0 +1 @@
+usr/share/openvswitch/python/ovs usr/lib/python3.7/dist-packages/
diff --git a/debian/rules b/debian/rules
index 77f3a19841e5..4dc05c39ba6c 100755
--- a/debian/rules
+++ b/debian/rules
@@ -22,7 +22,7 @@ PARALLEL =
 endif
 
 %:
-	dh $@ --with autoreconf,python2 --parallel
+	dh $@ --with autoreconf,python3 --parallel
 
 # use --as-needed only if supported by dh-autoreconf (to simplify backporting)
 DH_AS_NEEDED=$(shell dpkg --compare-versions $$(dpkg --status dh-autoreconf | grep Version | cut -d' ' -f2) ge 6 && echo --as-needed)
diff --git a/include/openflow/automake.mk b/include/openflow/automake.mk
index 18cc649899f8..a1d75756c9d7 100644
--- a/include/openflow/automake.mk
+++ b/include/openflow/automake.mk
@@ -12,7 +12,6 @@ openflowinclude_HEADERS = \
 	include/openflow/openflow-common.h \
 	include/openflow/openflow.h
 
-if HAVE_PYTHON
 SUFFIXES += .h .hstamp
 
 .h.hstamp:
@@ -23,7 +22,6 @@ HSTAMP_FILES = $(openflowinclude_HEADERS:.h=.hstamp)
 CLEANFILES += $(HSTAMP_FILES)
 ALL_LOCAL += $(HSTAMP_FILES)
 $(HSTAMP_FILES): build-aux/check-structs $(openflowinclude_HEADERS)
-endif
 
 EXTRA_DIST += build-aux/check-structs
 
diff --git a/ipsec/ovs-monitor-ipsec.in b/ipsec/ovs-monitor-ipsec.in
index 4710be039ac7..37e370324562 100755
--- a/ipsec/ovs-monitor-ipsec.in
+++ b/ipsec/ovs-monitor-ipsec.in
@@ -1,4 +1,4 @@
-#! @PYTHON@
+#! @PYTHON3@
 # Copyright (c) 2017 Nicira, Inc.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
diff --git a/m4/openvswitch.m4 b/m4/openvswitch.m4
index ba912e58780a..78d70fb4e17e 100644
--- a/m4/openvswitch.m4
+++ b/m4/openvswitch.m4
@@ -354,57 +354,16 @@ dnl Checks for valgrind/valgrind.h.
 AC_DEFUN([OVS_CHECK_VALGRIND],
   [AC_CHECK_HEADERS([valgrind/valgrind.h])])
 
-dnl Checks for Python 2.x, x >= 7.
-AC_DEFUN([OVS_CHECK_PYTHON2],
-  [AC_CACHE_CHECK(
-     [for Python 2.x for x >= 7],
-     [ovs_cv_python2],
-     [if test -n "$PYTHON2"; then
-        ovs_cv_python2=$PYTHON2
-      else
-        ovs_cv_python2=no
-        for binary in python2 python2.7 python; do
-          ovs_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-          for dir in $PATH; do
-            IFS=$ovs_save_IFS
-            test -z "$dir" && dir=.
-            if test -x "$dir"/"$binary" && "$dir"/"$binary" -c 'import sys
-if sys.hexversion >= 0x02070000 and sys.hexversion < 0x03000000:
-    sys.exit(0)
-else:
-    sys.exit(1)'; then
-              ovs_cv_python2=$dir/$binary
-              break 2
-            fi
-          done
-        done
-        if test "$ovs_cv_python2" != no && test -x "$ovs_cv_python2"; then
-          if ! "$ovs_cv_python2" -c 'import six ; six.moves.range' >&AS_MESSAGE_LOG_FD 2>&1; then
-            ovs_cv_python2=no
-            AC_MSG_WARN([Missing Python six library or version too old.])
-          fi
-        fi
-      fi])
-   AC_SUBST([HAVE_PYTHON2])
-   AM_MISSING_PROG([PYTHON2], [python2])
-   if test "$ovs_cv_python2" != no; then
-     PYTHON2=$ovs_cv_python2
-     HAVE_PYTHON2=yes
-   else
-     HAVE_PYTHON2=no
-   fi
-   AM_CONDITIONAL([HAVE_PYTHON2], [test "$HAVE_PYTHON2" = yes])])
-
-dnl Checks for Python 3.x, x >= 4.
+dnl Checks for Python 3.4 or later.
 AC_DEFUN([OVS_CHECK_PYTHON3],
   [AC_CACHE_CHECK(
-     [for Python 3.x for x >= 4],
+     [for Python 3 (version 3.4 or later)],
      [ovs_cv_python3],
      [if test -n "$PYTHON3"; then
         ovs_cv_python3=$PYTHON3
       else
         ovs_cv_python3=no
-        for binary in python3 python3.4; do
+        for binary in python3 python3.4 python3.5 python3.6 python3.7; do
           ovs_save_IFS=$IFS; IFS=$PATH_SEPARATOR
           for dir in $PATH; do
             IFS=$ovs_save_IFS
@@ -419,46 +378,24 @@ else:
             fi
           done
         done
-        if test "$ovs_cv_python3" != no; then
-          if test -x "$ovs_cv_python3" && ! "$ovs_cv_python3" -c 'import six' >/dev/null 2>&1; then
-            ovs_cv_python3=no
-            AC_MSG_WARN([Missing Python six library.])
-          fi
-        fi
       fi])
-   AC_SUBST([HAVE_PYTHON3])
-   AM_MISSING_PROG([PYTHON3], [python3])
-   if test "$ovs_cv_python3" != no; then
-     PYTHON3=$ovs_cv_python3
-     HAVE_PYTHON3=yes
-   else
-     HAVE_PYTHON3=no
+   if test "$ovs_cv_python3" = no; then
+     AC_MSG_ERROR([Python 3.4 or later is required but not found in $PATH, please install it or set $PYTHON3 to point to it])
    fi
-   AM_CONDITIONAL([HAVE_PYTHON3], [test "$HAVE_PYTHON3" = yes])])
-
-dnl Checks if you have any compatible Python version installed.
-dnl Python 2.7+ has the preference to 3.4+
-AC_DEFUN([OVS_CHECK_PYTHON],
-  [AC_CACHE_CHECK(
-     [for Python 2 or 3],
-     [ovs_cv_python],
-     [if test -n "$PYTHON"; then
-        ovs_cv_python=$PYTHON
+   AC_ARG_VAR([PYTHON3])
+   PYTHON3=$ovs_cv_python3])
+
+dnl Checks for python six library.
+AC_DEFUN([OVS_CHECK_SIX],
+  [AC_REQUIRE([OVS_CHECK_PYTHON3])
+   AC_CACHE_CHECK(
+     [where Python six library is available],
+     [ovs_cv_six],
+     [if $PYTHON3 -c 'import six' >/dev/null 2>&1; then
+        ovs_cv_six=yes
       else
-        ovs_cv_python=no
-        if test "$ovs_cv_python2" != no; then
-          ovs_cv_python=$ovs_cv_python2
-        elif test "$ovs_cv_python3" != no; then
-          ovs_cv_python=$ovs_cv_python3
-        else
-          AC_MSG_ERROR([Missing Python.])
-        fi
-      fi])
-    AC_SUBST([PYTHON])
-    PYTHON=$ovs_cv_python
-    AC_SUBST([HAVE_PYTHON])
-    HAVE_PYTHON=yes
-    AM_CONDITIONAL([HAVE_PYTHON], [test "$HAVE_PYTHON" = yes])])
+        AC_MSG_ERROR([Missing Python six library.])
+      fi])])
 
 dnl Checks for flake8.
 AC_DEFUN([OVS_CHECK_FLAKE8],
diff --git a/manpages.mk b/manpages.mk
index a66d109e347f..b43deaef1ae5 100644
--- a/manpages.mk
+++ b/manpages.mk
@@ -116,12 +116,6 @@ lib/vlog-syn.man:
 lib/vlog.man:
 ovsdb/ovsdb-schemas.man:
 
-utilities/bugtool/ovs-bugtool.8: \
-	utilities/bugtool/ovs-bugtool.8.in \
-	lib/ovs.tmac
-utilities/bugtool/ovs-bugtool.8.in:
-lib/ovs.tmac:
-
 utilities/ovs-appctl.8: \
 	utilities/ovs-appctl.8.in \
 	lib/common.man \
diff --git a/ovsdb/ovsdb-dot.in b/ovsdb/ovsdb-dot.in
index 8eea6172455d..41b986c0ac7f 100755
--- a/ovsdb/ovsdb-dot.in
+++ b/ovsdb/ovsdb-dot.in
@@ -1,4 +1,4 @@
-#! @PYTHON@
+#! @PYTHON3@
 
 from datetime import date
 import ovs.db.error
diff --git a/ovsdb/ovsdb-idlc.in b/ovsdb/ovsdb-idlc.in
index 22d0a4e22ed7..c285ee4b3c10 100755
--- a/ovsdb/ovsdb-idlc.in
+++ b/ovsdb/ovsdb-idlc.in
@@ -1,4 +1,4 @@
-#! @PYTHON@
+#! @PYTHON3@
 
 from __future__ import print_function
 import getopt
diff --git a/python/automake.mk b/python/automake.mk
index 5a1e1da8a79a..2f08c7701484 100644
--- a/python/automake.mk
+++ b/python/automake.mk
@@ -69,7 +69,6 @@ FLAKE8_PYFILES += \
 	python/build/nroff.py \
 	python/ovs/dirs.py.template
 
-if HAVE_PYTHON
 nobase_pkgdata_DATA = $(ovs_pyfiles) $(ovstest_pyfiles)
 ovs-install-data-local:
 	$(MKDIR_P) python/ovs
@@ -88,14 +87,10 @@ ovs-install-data-local:
 	rm python/ovs/dirs.py.tmp
 
 python-sdist: $(srcdir)/python/ovs/version.py $(ovs_pyfiles) python/ovs/dirs.py
-	(cd python/ && $(PYTHON) setup.py sdist)
+	(cd python/ && $(PYTHON3) setup.py sdist)
 
 pypi-upload: $(srcdir)/python/ovs/version.py $(ovs_pyfiles) python/ovs/dirs.py
-	(cd python/ && $(PYTHON) setup.py sdist upload)
-else
-ovs-install-data-local:
-	@:
-endif
+	(cd python/ && $(PYTHON3) setup.py sdist upload)
 install-data-local: ovs-install-data-local
 
 UNINSTALL_LOCAL += ovs-uninstall-local
diff --git a/rhel/openvswitch-fedora.spec.in b/rhel/openvswitch-fedora.spec.in
index 614c5f9f08ea..fc113c9f1642 100644
--- a/rhel/openvswitch-fedora.spec.in
+++ b/rhel/openvswitch-fedora.spec.in
@@ -45,17 +45,6 @@
 %define _rundir /run
 %endif
 
-# define the python package prefix based on distribution version so that we can
-# simultaneously support RHEL-based and later Fedora versions in this spec file.
-%if 0%{?fedora} >= 25
-%define _py2 python2
-%endif
-
-%if 0%{?rhel} || 0%{?fedora} < 25
-%define _py2 python
-%endif
-
-
 Name: openvswitch
 Summary: Open vSwitch
 Group: System Environment/Daemons
@@ -72,7 +61,6 @@ Source: http://openvswitch.org/releases/%{name}-%{version}.tar.gz
 BuildRequires: gcc gcc-c++
 BuildRequires: autoconf automake libtool
 BuildRequires: systemd-units openssl openssl-devel
-BuildRequires: %{_py2}-devel
 %if 0%{?fedora} > 22 || %{with build_python3}
 BuildRequires: python3-devel
 %endif
@@ -81,7 +69,6 @@ BuildRequires: groff graphviz
 BuildRequires: checkpolicy, selinux-policy-devel
 BuildRequires: /usr/bin/sphinx-build-3
 # make check dependencies
-BuildRequires: %{_py2}-twisted%{?rhel:-core} %{_py2}-zope-interface %{_py2}-six
 BuildRequires: procps-ng
 %if %{with libcapng}
 BuildRequires: libcap-ng libcap-ng-devel
@@ -122,16 +109,6 @@ Requires: selinux-policy-targeted
 %description selinux-policy
 Tailored Open vSwitch SELinux policy
 
-%package -n %{_py2}-openvswitch
-Summary: Open vSwitch python2 bindings
-License: ASL 2.0
-BuildArch: noarch
-Requires: %{_py2}
-Requires: %{_py2}-six
-%{?python_provide:%python_provide python2-openvswitch = %{version}-%{release}}
-%description -n %{_py2}-openvswitch
-Python bindings for the Open vSwitch database
-
 %if 0%{?fedora} > 22 || %{with build_python3}
 %package -n python3-openvswitch
 Summary: Open vSwitch python3 bindings
@@ -149,8 +126,6 @@ Python bindings for the Open vSwitch database
 Summary: Open vSwitch testing utilities
 License: ASL 2.0
 BuildArch: noarch
-Requires: %{_py2}-openvswitch = %{version}-%{release}
-Requires: %{_py2} %{_py2}-netifaces %{_py2}-twisted
 
 %description test
 Utilities that are useful to diagnose performance and connectivity
@@ -179,7 +154,7 @@ service.
 %package ipsec
 Summary: Open vSwitch IPsec tunneling support
 License: ASL 2.0
-Requires: openvswitch %{_py2}-openvswitch libreswan
+Requires: openvswitch python3-openvswitch libreswan
 
 %description ipsec
 This package provides IPsec tunneling support for OVS tunnels.
@@ -201,12 +176,7 @@ This package provides IPsec tunneling support for OVS tunnels.
         --disable-static \
         --enable-shared \
         --with-pkidir=%{_sharedstatedir}/openvswitch/pki \
-%if 0%{?fedora} > 22 || %{with build_python3}
-        PYTHON3=%{__python3} \
-        PYTHON=%{__python2}
-%else
-        PYTHON=%{__python}
-%endif
+        PYTHON3=%{__python3}
 
 build-aux/dpdkstrip.py \
 %if %{with dpdk}
@@ -274,13 +244,9 @@ install -p -m 0755 rhel/etc_sysconfig_network-scripts_ifdown-ovs \
 install -p -m 0755 rhel/etc_sysconfig_network-scripts_ifup-ovs \
         $RPM_BUILD_ROOT/%{_sysconfdir}/sysconfig/network-scripts/ifup-ovs
 
-install -d -m 0755 $RPM_BUILD_ROOT%{python2_sitelib}
-cp -a $RPM_BUILD_ROOT/%{_datadir}/openvswitch/python/* \
-   $RPM_BUILD_ROOT%{python2_sitelib}
-
 %if 0%{?fedora} > 22 || %{with build_python3}
 install -d -m 0755 $RPM_BUILD_ROOT%{python3_sitelib}
-cp -a $RPM_BUILD_ROOT/%{_datadir}/openvswitch/python/ovs \
+cp -a $RPM_BUILD_ROOT/%{_datadir}/openvswitch/python/* \
    $RPM_BUILD_ROOT%{python3_sitelib}
 %endif
 
@@ -435,9 +401,6 @@ fi
 %defattr(-,root,root)
 %{_datadir}/selinux/packages/%{name}/openvswitch-custom.pp
 
-%files -n %{_py2}-openvswitch
-%{python2_sitelib}/ovs
-
 %if 0%{?fedora} > 22 || %{with build_python3}
 %files -n python3-openvswitch
 %{python3_sitelib}/ovs
@@ -456,7 +419,7 @@ fi
 %{_mandir}/man1/ovs-pcap.1*
 %{_mandir}/man8/ovs-tcpdump.8*
 %{_mandir}/man1/ovs-tcpundump.1*
-%{python2_sitelib}/ovstest
+%{python3_sitelib}/ovstest
 
 %files devel
 %{_libdir}/lib*.so
diff --git a/tests/atlocal.in b/tests/atlocal.in
index 556f8681cf12..1dc7cd5d087a 100644
--- a/tests/atlocal.in
+++ b/tests/atlocal.in
@@ -1,28 +1,14 @@
 # -*- shell-script -*-
 HAVE_OPENSSL='@HAVE_OPENSSL@'
 OPENSSL_SUPPORTS_SNI='@OPENSSL_SUPPORTS_SNI@'
-HAVE_PYTHON='@HAVE_PYTHON@'
-HAVE_PYTHON2='@HAVE_PYTHON2@'
-HAVE_PYTHON3='@HAVE_PYTHON3@'
 HAVE_UNBOUND='@HAVE_UNBOUND@'
 EGREP='@EGREP@'
+PYTHON3='@PYTHON3@'
 
-if test x"$PYTHON" = x; then
-    PYTHON='@PYTHON@'
-fi
-
-if test x"$PYTHON2" = x; then
-    PYTHON2='@PYTHON2@'
-fi
-
-if test x"$PYTHON3" = x; then
-    PYTHON3='@PYTHON3@'
-
-    # PYTHONCOERCECLOCALE=0 disables the Unicode compatibility warning on
-    # stderr that breaks almost any Python3 test (PEP 0538)
-    PYTHONCOERCECLOCALE=0
-    export PYTHONCOERCECLOCALE
-fi
+# PYTHONCOERCECLOCALE=0 disables the Unicode compatibility warning on
+# stderr that breaks almost any Python3 test (PEP 0538)
+PYTHONCOERCECLOCALE=0
+export PYTHONCOERCECLOCALE
 
 PYTHONPATH=$abs_top_srcdir/python:$abs_top_builddir/tests:$PYTHONPATH
 export PYTHONPATH
@@ -63,7 +49,7 @@ Linux)
     # in particular the patch attached there, which was applied to glibc CVS as
     # "Restore locking in free_check." between 1.11 and 1.11.1.
     vswitchd=$abs_top_builddir/vswitchd/ovs-vswitchd
-    glibc=`ldd $vswitchd | sed -n 's/^	libc\.[^ ]* => \([^ ]*\) .*/\1/p'`
+    glibc=`ldd $vswitchd | sed -n 's/^  libc\.[^ ]* => \([^ ]*\) .*/\1/p'`
     glibc_version=`$glibc | sed -n '1s/.*version \([0-9]\{1,\}\.[0-9]\{1,\}\).*/\1/p'`
     case $glibc_version in
         2.[0-9] | 2.1[01]) mcheck=disabled ;;
@@ -116,7 +102,7 @@ FreeBSD|NetBSD)
     ;;
 esac
 
-if test x"$PYTHON3" != x && test "$IS_WIN32" = yes; then
+if test "$IS_WIN32" = yes; then
     # enables legacy windows unicode printing needed for Python3 compatibility
     # with the Python2 tests
     PYTHONLEGACYWINDOWSFSENCODING=true
@@ -126,7 +112,7 @@ if test x"$PYTHON3" != x && test "$IS_WIN32" = yes; then
 fi
 
 # Check whether to run IPv6 tests.
-$PYTHON -c '
+$PYTHON3 -c '
 import errno
 import socket
 import sys
@@ -140,7 +126,7 @@ except socket.error as e:
 case $? in
     0) HAVE_IPV6=yes ;;
     2) HAVE_IPV6=no ;;
-    *) echo "$0: unexpected error probing $PYTHON for IPv6 support" >&2 ;;
+    *) echo "$0: unexpected error probing $PYTHON3 for IPv6 support" >&2 ;;
 esac
 
 # Look for a python L7 library 'LIB' in the system. If it is found, defines
@@ -149,13 +135,9 @@ find_l7_lib()
 {
     set +x
     var=HAVE_`echo "$1" | tr '[a-z]' '[A-Z]'`
-    if test "$HAVE_PYTHON" = "yes"; then
-        result=$($PYTHON $abs_top_srcdir/tests/test-l7.py --help | grep "$1")
-        if test "x${result}" != x; then
-            eval ${var}="yes"
-        else
-            eval ${var}="no"
-        fi
+    result=$($PYTHON3 $abs_top_srcdir/tests/test-l7.py --help | grep "$1")
+    if test "x${result}" != x; then
+        eval ${var}="yes"
     else
         eval ${var}="no"
     fi
diff --git a/tests/automake.mk b/tests/automake.mk
index 0b4f29486bc7..0442334ecb78 100644
--- a/tests/automake.mk
+++ b/tests/automake.mk
@@ -199,7 +199,7 @@ check-local:
 COVERAGE = coverage
 COVERAGE_FILE='$(abs_srcdir)/.coverage'
 check-pycov: all clean-pycov
-	PYTHONDONTWRITEBYTECODE=yes COVERAGE_FILE=$(COVERAGE_FILE) PYTHON='$(COVERAGE) run -p' $(SHELL) '$(TESTSUITE)' -C tests AUTOTEST_PATH=$(AUTOTEST_PATH) $(TESTSUITEFLAGS)
+	PYTHONDONTWRITEBYTECODE=yes COVERAGE_FILE=$(COVERAGE_FILE) PYTHON3='$(COVERAGE) run -p' $(SHELL) '$(TESTSUITE)' -C tests AUTOTEST_PATH=$(AUTOTEST_PATH) $(TESTSUITEFLAGS)
 	@cd $(srcdir) && $(COVERAGE) combine && COVERAGE_FILE=$(COVERAGE_FILE) $(COVERAGE) annotate
 	@echo
 	@echo '----------------------------------------------------------------------'
diff --git a/tests/check-structs.at b/tests/check-structs.at
index 4163c30d6dbe..15ca536112e6 100644
--- a/tests/check-structs.at
+++ b/tests/check-structs.at
@@ -3,10 +3,9 @@ AT_BANNER([struct alignment checker unit tests])
 m4_define([check_structs], [$top_srcdir/build-aux/check-structs])
 m4_define([RUN_STRUCT_CHECKER], 
   [AT_KEYWORDS([check-structs])
-   AT_SKIP_IF([test $HAVE_PYTHON = no])
    AT_DATA([test.h], [$1
 ])
-   AT_CHECK_UNQUOTED([$PYTHON check_structs test.h], [$2], [$3], [$4])])
+   AT_CHECK_UNQUOTED([$PYTHON3 check_structs test.h], [$2], [$3], [$4])])
 
 AT_SETUP([check struct tail padding])
 RUN_STRUCT_CHECKER(
diff --git a/tests/checkpatch.at b/tests/checkpatch.at
index fe21acdf2d22..6c7394772270 100755
--- a/tests/checkpatch.at
+++ b/tests/checkpatch.at
@@ -3,10 +3,9 @@ AT_BANNER([checkpatch])
 OVS_START_SHELL_HELPERS
 # try_checkpatch PATCH [ERRORS]
 #
-# Runs checkpatch under Python 2 and Python 3, if installed, on the given
-# PATCH, expecting the specified set of ERRORS (and warnings).
+# Runs checkpatch, if installed, on the given PATCH, expecting the
+# specified set of ERRORS (and warnings).
 try_checkpatch() {
-    AT_SKIP_IF([test $HAVE_PYTHON2 = no && test $HAVE_PYTHON3 = no])
     # Take the patch to test from $1.  Remove an initial four-space indent
     # from it and, if it is just headers with no body, add a null body.
     echo "$1" | sed 's/^    //' > test.patch
@@ -22,18 +21,12 @@ try_checkpatch() {
         : > expout
     fi
 
-    try_checkpatch__ "$HAVE_PYTHON2" "$PYTHON2"
-    try_checkpatch__ "$HAVE_PYTHON3" "$PYTHON3"
-}
-try_checkpatch__() {
-    if test $1 = no; then
-        :
-    elif test -s expout; then
-        AT_CHECK([$2 $top_srcdir/utilities/checkpatch.py -q test.patch],
+    if test -s expout; then
+        AT_CHECK([$PYTHON3 $top_srcdir/utilities/checkpatch.py -q test.patch],
                  [1], [stdout])
         AT_CHECK([sed '/^Lines checked:/,$d' stdout], [0], [expout])
     else
-        AT_CHECK([$2 $top_srcdir/utilities/checkpatch.py -q test.patch])
+        AT_CHECK([$PYTHON3 $top_srcdir/utilities/checkpatch.py -q test.patch])
     fi
 }
 OVS_END_SHELL_HELPERS
diff --git a/tests/daemon-py.at b/tests/daemon-py.at
index 6adea3c85dfc..883e45a5ac21 100644
--- a/tests/daemon-py.at
+++ b/tests/daemon-py.at
@@ -1,252 +1,205 @@
-AT_BANNER([daemon unit tests - Python])
-
-m4_define([DAEMON_PYN],
-  [AT_SETUP([daemon - $1])
-   AT_SKIP_IF([test $2 = no])
-   # Skip this test for Windows, echo $! gives shell pid instead of parent process
-   AT_SKIP_IF([test "$IS_WIN32" = "yes"])
-   AT_KEYWORDS([python daemon])
-
-   on_exit 'kill $(cat *.pid)'
-   pidfile=test-daemon.py.pid
-
-   # Start the daemon and wait for the pidfile to get created
-   # and that its contents are the correct pid.
-   AT_CHECK([$3 $srcdir/test-daemon.py --pidfile & echo $!], [0], [stdout])
-   pid=$(cat stdout)
-
-   OVS_WAIT_UNTIL([test -s $pidfile], [kill $pid])
-   AT_CHECK([test $pid = $(cat $pidfile)])
-   AT_CHECK([kill -0 $pid])
-
-   # Kill the daemon and make sure that the pidfile gets deleted.
-   kill $pid
-   OVS_WAIT_WHILE([kill -0 $pid])
-   AT_CHECK([test ! -e $pidfile])
-   AT_CLEANUP])
-
-DAEMON_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-DAEMON_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
-
-m4_define([DAEMON_MONITOR_PYN],
-  [AT_SETUP([daemon --monitor - $1])
-   AT_SKIP_IF([test $2 = no])
-
-   # Skip this test for Windows, echo $! gives shell pid instead of parent process
-   AT_SKIP_IF([test "$IS_WIN32" = "yes"])
-
-   on_exit 'kill $(cat *.pid)'
-   pidfile=test-daemon.py.pid
-
-   # Start the daemon and wait for the pidfile to get created.
-   AT_CHECK([$3 $srcdir/test-daemon.py --pidfile --monitor & echo $!], [0], [stdout])
-   monitor=$(cat stdout)
-   OVS_WAIT_UNTIL([test -s $pidfile])
-   child=$(cat $pidfile)
-
-   # Check that the pidfile names a running process,
-   # and that the parent process of that process is our child process.
-   check_ancestors $child $monitor
-
-   # Kill the daemon process, making it look like a segfault,
-   # and wait for a new child process to get spawned.
-   AT_CHECK([kill -SEGV $child])
-   OVS_WAIT_WHILE([kill -0 $child])
-   OVS_WAIT_UNTIL([test -s $pidfile && test $(cat $pidfile) != $child])
-   child2=$(cat $pidfile)
-
-   # Check that the pidfile names a running process,
-   # and that the parent process of that process is our child process.
-   check_ancestors $child2 $monitor
-
-   # Kill the daemon process with SIGTERM, and wait for the daemon
-   # and the monitor processes to go away and the pidfile to get deleted.
-   AT_CHECK([kill $child2])
-   OVS_WAIT_WHILE([kill -0 $monitor || kill -0 $child2 || test -e $pidfile])
-   AT_CLEANUP])
-
-DAEMON_MONITOR_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-DAEMON_MONITOR_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
-
-m4_define([DAEMON_MONITOR_RESTART_PYN],
-  [AT_SETUP([daemon --monitor restart exit code - $1])
-   AT_SKIP_IF([test $2 = no])
-   # Skip this test for Windows, echo $! gives shell pid instead of parent process
-   AT_SKIP_IF([test "$IS_WIN32" = "yes"])
-
-   on_exit 'kill $(cat *.pid)'
-   pidfile=test-daemon.py.pid
-
-   # Start the daemon and wait for the pidfile to get created.
-   AT_CHECK([$3 $srcdir/test-daemon.py --pidfile --monitor & echo $!], [0], [stdout])
-   monitor=$(cat stdout)
-   OVS_WAIT_UNTIL([test -s $pidfile])
-   child=$(cat $pidfile)
-
-   # Check that the pidfile names a running process,
-   # and that the parent process of that process is our child process.
-   check_ancestors $child $monitor
-
-   # HUP the daemon process causing it to throw an exception,
-   # and wait for a new child process to get spawned.
-   AT_CHECK([kill -HUP $child])
-   OVS_WAIT_WHILE([kill -0 $child])
-   OVS_WAIT_UNTIL([test -s $pidfile && test $child != $(cat $pidfile)])
-   child2=$(cat $pidfile)
-
-   # Check that the pidfile names a running process,
-   # and that the parent process of that process is our child process.
-   check_ancestors $child2 $monitor
-
-   # Kill the daemon process with SIGTERM, and wait for the daemon
-   # and the monitor processes to go away and the pidfile to get deleted.
-   AT_CHECK([kill $child2])
-   OVS_WAIT_WHILE([kill -0 $monitor || kill -0 $child2 || test -e $pidfile])
-   AT_CLEANUP])
-
-DAEMON_MONITOR_RESTART_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-DAEMON_MONITOR_RESTART_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
-
-m4_define([DAEMON_DETACH_PYN],
-  [AT_SETUP([daemon --detach - $1])
-   AT_SKIP_IF([test $2 = no])
-
-   # Skip this test for Windows, the pid file not removed if the daemon is killed
-   AT_SKIP_IF([test "$IS_WIN32" = "yes"])
-
-   on_exit 'kill $(cat *.pid)'
-   pidfile=test-daemon.py.pid
-
-   # Start the daemon and make sure that the pidfile exists immediately.
-   # We don't wait for the pidfile to get created because the daemon is
-   # supposed to do so before the parent exits.
-   AT_CHECK([$3 $srcdir/test-daemon.py --pidfile --detach --no-chdir], [0])
-   AT_CHECK([test -s $pidfile])
-   pid=$(cat $pidfile)
-   check_ancestors $pid 1
-
-   # Kill the daemon and make sure that the pidfile gets deleted.
-   AT_CHECK([kill $pid])
-   OVS_WAIT_WHILE([kill -0 $pid])
-   AT_CHECK([test ! -e $pidfile])
-   AT_CLEANUP])
-
-DAEMON_DETACH_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-DAEMON_DETACH_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
-
-m4_define([DAEMON_DETACH_MONITOR_PYN],
-  [AT_SETUP([daemon --detach --monitor - $1])
-   AT_SKIP_IF([test $2 = no])
-
-   # Skip this test for Windows, uses Linux specific kill signal
-   AT_SKIP_IF([test "$IS_WIN32" = "yes"])
-
-   on_exit 'kill $(cat *.pid)'
-   pidfile=test-daemon.py.pid
-
-   # Start the daemon and make sure that the pidfile exists immediately.
-   # We don't wait for the pidfile to get created because the daemon is
-   # supposed to do so before the parent exits.
-   AT_CHECK([$3 $srcdir/test-daemon.py --pidfile --detach --no-chdir --monitor], [0])
-   AT_CHECK([test -s $pidfile])
-   child=$(cat $pidfile)
-   AT_CHECK([parent_pid $child], [0], [stdout])
-   monitor=$(cat stdout)
-
-   # Check that the pidfile names a running process,
-   # and that the parent process of that process is a running process,
-   # and that the parent process of that process is init.
-   check_ancestors $child $monitor 1
-
-   # Kill the daemon process, making it look like a segfault,
-   # and wait for a new daemon process to get spawned.
-   AT_CHECK([kill -SEGV $child])
-   OVS_WAIT_WHILE([kill -0 $child])
-   OVS_WAIT_UNTIL([test -s $pidfile && test $(cat $pidfile) != $child])
-   child2=$(cat $pidfile)
-
-   # Check that the pidfile names a running process,
-   # and that the parent process of that process is our child process.
-   check_ancestors $child2 $monitor 1
-
-   # Kill the daemon process with SIGTERM, and wait for the daemon
-   # and the monitor processes to go away and the pidfile to get deleted.
-   AT_CHECK([kill $child2])
-   OVS_WAIT_WHILE([kill -0 $child2 || kill -0 $monitor || test -e $pidfile])
-   AT_CLEANUP])
-
-DAEMON_DETACH_MONITOR_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-DAEMON_DETACH_MONITOR_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
-
-m4_define([DAEMON_DETACH_ERRORS_PYN],
-  [AT_SETUP([daemon --detach startup errors - $1])
-   AT_SKIP_IF([test $2 = no])
-   AT_CHECK([$3 $srcdir/test-daemon.py --pidfile --detach --no-chdir --bail], [1], [], [stderr])
-   AT_CHECK([grep 'test-daemon.py: exiting after daemonize_start() as requested' stderr],
-     [0], [ignore])
-   AT_CHECK([test ! -s test-daemon.py.pid])
-   AT_CLEANUP])
-
-DAEMON_DETACH_ERRORS_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-DAEMON_DETACH_ERRORS_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
-
-m4_define([DAEMON_DETACH_MONITOR_ERRORS_PYN],
-  [AT_SETUP([daemon --detach --monitor startup errors - $1])
-   AT_SKIP_IF([test $2 = no])
-   AT_CAPTURE_FILE([pid])
-   AT_CHECK([$3 $srcdir/test-daemon.py --pidfile --detach --no-chdir --monitor --bail], [1], [], [stderr])
-   AT_CHECK([grep 'test-daemon.py: exiting after daemonize_start() as requested' stderr],
-     [0], [ignore])
-   AT_CHECK([test ! -s test-daemon.py.pid])
-   AT_CLEANUP])
-
-DAEMON_DETACH_MONITOR_ERRORS_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-DAEMON_DETACH_MONITOR_ERRORS_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
-
-m4_define([DAEMON_DETACH_CLOSES_FDS_PYN],
-  [AT_SETUP([daemon --detach closes standard fds - $1])
-   AT_SKIP_IF([test $2 = no])
-
-   # Skip this test for Windows, uses Linux specific kill signal
-   AT_SKIP_IF([test "$IS_WIN32" = "yes"])
-
-   AT_CHECK([(yes 2>stderr; echo $? > status) | $3 $srcdir/test-daemon.py --pidfile --detach --no-chdir])
-   AT_CHECK([kill $(cat test-daemon.py.pid)])
-   AT_CHECK([test -s status])
-   if grep '[[bB]]roken pipe' stderr >/dev/null 2>&1; then
-     # Something in the environment caused SIGPIPE to be ignored, but
-     # 'yes' at least told us that it got EPIPE.  Good enough; we know
-     # that stdout was closed.
-     :
-   else
-     # Otherwise make sure that 'yes' died from SIGPIPE.
-     AT_CHECK([kill -l `cat status`], [0], [PIPE
+AT_BANNER([daemon unit tests - Python3])
+
+AT_SETUP([daemon - Python3])
+# Skip this test for Windows, echo $! gives shell pid instead of parent process
+AT_SKIP_IF([test "$IS_WIN32" = "yes"])
+AT_KEYWORDS([python daemon])
+
+on_exit 'kill $(cat *.pid)'
+pidfile=test-daemon.py.pid
+
+# Start the daemon and wait for the pidfile to get created
+# and that its contents are the correct pid.
+AT_CHECK([$PYTHON3 $srcdir/test-daemon.py --pidfile & echo $!], [0], [stdout])
+pid=$(cat stdout)
+
+OVS_WAIT_UNTIL([test -s $pidfile], [kill $pid])
+AT_CHECK([test $pid = $(cat $pidfile)])
+AT_CHECK([kill -0 $pid])
+
+# Kill the daemon and make sure that the pidfile gets deleted.
+kill $pid
+OVS_WAIT_WHILE([kill -0 $pid])
+AT_CHECK([test ! -e $pidfile])
+AT_CLEANUP
+
+AT_SETUP([daemon --monitor - Python3])
+# Skip this test for Windows, echo $! gives shell pid instead of parent process
+AT_SKIP_IF([test "$IS_WIN32" = "yes"])
+
+on_exit 'kill $(cat *.pid)'
+pidfile=test-daemon.py.pid
+
+# Start the daemon and wait for the pidfile to get created.
+AT_CHECK([$PYTHON3 $srcdir/test-daemon.py --pidfile --monitor & echo $!], [0], [stdout])
+monitor=$(cat stdout)
+OVS_WAIT_UNTIL([test -s $pidfile])
+child=$(cat $pidfile)
+
+# Check that the pidfile names a running process,
+# and that the parent process of that process is our child process.
+check_ancestors $child $monitor
+
+# Kill the daemon process, making it look like a segfault,
+# and wait for a new child process to get spawned.
+AT_CHECK([kill -SEGV $child])
+OVS_WAIT_WHILE([kill -0 $child])
+OVS_WAIT_UNTIL([test -s $pidfile && test $(cat $pidfile) != $child])
+child2=$(cat $pidfile)
+
+# Check that the pidfile names a running process,
+# and that the parent process of that process is our child process.
+check_ancestors $child2 $monitor
+
+# Kill the daemon process with SIGTERM, and wait for the daemon
+# and the monitor processes to go away and the pidfile to get deleted.
+AT_CHECK([kill $child2])
+OVS_WAIT_WHILE([kill -0 $monitor || kill -0 $child2 || test -e $pidfile])
+AT_CLEANUP
+
+AT_SETUP([daemon --monitor restart exit code - Python3])
+# Skip this test for Windows, echo $! gives shell pid instead of parent process
+AT_SKIP_IF([test "$IS_WIN32" = "yes"])
+
+on_exit 'kill $(cat *.pid)'
+pidfile=test-daemon.py.pid
+
+# Start the daemon and wait for the pidfile to get created.
+AT_CHECK([$PYTHON3 $srcdir/test-daemon.py --pidfile --monitor & echo $!], [0], [stdout])
+monitor=$(cat stdout)
+OVS_WAIT_UNTIL([test -s $pidfile])
+child=$(cat $pidfile)
+
+# Check that the pidfile names a running process,
+# and that the parent process of that process is our child process.
+check_ancestors $child $monitor
+
+# HUP the daemon process causing it to throw an exception,
+# and wait for a new child process to get spawned.
+AT_CHECK([kill -HUP $child])
+OVS_WAIT_WHILE([kill -0 $child])
+OVS_WAIT_UNTIL([test -s $pidfile && test $child != $(cat $pidfile)])
+child2=$(cat $pidfile)
+
+# Check that the pidfile names a running process,
+# and that the parent process of that process is our child process.
+check_ancestors $child2 $monitor
+
+# Kill the daemon process with SIGTERM, and wait for the daemon
+# and the monitor processes to go away and the pidfile to get deleted.
+AT_CHECK([kill $child2])
+OVS_WAIT_WHILE([kill -0 $monitor || kill -0 $child2 || test -e $pidfile])
+AT_CLEANUP
+
+AT_SETUP([daemon --detach - Python3])
+
+# Skip this test for Windows, the pid file not removed if the daemon is killed
+AT_SKIP_IF([test "$IS_WIN32" = "yes"])
+
+on_exit 'kill $(cat *.pid)'
+pidfile=test-daemon.py.pid
+
+# Start the daemon and make sure that the pidfile exists immediately.
+# We don't wait for the pidfile to get created because the daemon is
+# supposed to do so before the parent exits.
+AT_CHECK([$PYTHON3 $srcdir/test-daemon.py --pidfile --detach --no-chdir], [0])
+AT_CHECK([test -s $pidfile])
+pid=$(cat $pidfile)
+check_ancestors $pid 1
+
+# Kill the daemon and make sure that the pidfile gets deleted.
+AT_CHECK([kill $pid])
+OVS_WAIT_WHILE([kill -0 $pid])
+AT_CHECK([test ! -e $pidfile])
+AT_CLEANUP
+
+AT_SETUP([daemon --detach --monitor - Python3])
+
+# Skip this test for Windows, uses Linux specific kill signal
+AT_SKIP_IF([test "$IS_WIN32" = "yes"])
+
+on_exit 'kill $(cat *.pid)'
+pidfile=test-daemon.py.pid
+
+# Start the daemon and make sure that the pidfile exists immediately.
+# We don't wait for the pidfile to get created because the daemon is
+# supposed to do so before the parent exits.
+AT_CHECK([$PYTHON3 $srcdir/test-daemon.py --pidfile --detach --no-chdir --monitor], [0])
+AT_CHECK([test -s $pidfile])
+child=$(cat $pidfile)
+AT_CHECK([parent_pid $child], [0], [stdout])
+monitor=$(cat stdout)
+
+# Check that the pidfile names a running process,
+# and that the parent process of that process is a running process,
+# and that the parent process of that process is init.
+check_ancestors $child $monitor 1
+
+# Kill the daemon process, making it look like a segfault,
+# and wait for a new daemon process to get spawned.
+AT_CHECK([kill -SEGV $child])
+OVS_WAIT_WHILE([kill -0 $child])
+OVS_WAIT_UNTIL([test -s $pidfile && test $(cat $pidfile) != $child])
+child2=$(cat $pidfile)
+
+# Check that the pidfile names a running process,
+# and that the parent process of that process is our child process.
+check_ancestors $child2 $monitor 1
+
+# Kill the daemon process with SIGTERM, and wait for the daemon
+# and the monitor processes to go away and the pidfile to get deleted.
+AT_CHECK([kill $child2])
+OVS_WAIT_WHILE([kill -0 $child2 || kill -0 $monitor || test -e $pidfile])
+AT_CLEANUP
+
+AT_SETUP([daemon --detach startup errors - Python3])
+AT_CHECK([$PYTHON3 $srcdir/test-daemon.py --pidfile --detach --no-chdir --bail], [1], [], [stderr])
+AT_CHECK([grep 'test-daemon.py: exiting after daemonize_start() as requested' stderr],
+  [0], [ignore])
+AT_CHECK([test ! -s test-daemon.py.pid])
+AT_CLEANUP
+
+AT_SETUP([daemon --detach --monitor startup errors - Python3])
+AT_CAPTURE_FILE([pid])
+AT_CHECK([$PYTHON3 $srcdir/test-daemon.py --pidfile --detach --no-chdir --monitor --bail], [1], [], [stderr])
+AT_CHECK([grep 'test-daemon.py: exiting after daemonize_start() as requested' stderr],
+  [0], [ignore])
+AT_CHECK([test ! -s test-daemon.py.pid])
+AT_CLEANUP
+
+AT_SETUP([daemon --detach closes standard fds - Python3])
+# Skip this test for Windows, uses Linux specific kill signal
+AT_SKIP_IF([test "$IS_WIN32" = "yes"])
+
+AT_CHECK([(yes 2>stderr; echo $? > status) | $PYTHON3 $srcdir/test-daemon.py --pidfile --detach --no-chdir])
+AT_CHECK([kill $(cat test-daemon.py.pid)])
+AT_CHECK([test -s status])
+if grep '[[bB]]roken pipe' stderr >/dev/null 2>&1; then
+  # Something in the environment caused SIGPIPE to be ignored, but
+  # 'yes' at least told us that it got EPIPE.  Good enough; we know
+  # that stdout was closed.
+  :
+else
+  # Otherwise make sure that 'yes' died from SIGPIPE.
+  AT_CHECK([kill -l `cat status`], [0], [PIPE
 ])
-   fi
-   AT_CLEANUP])
-
-DAEMON_DETACH_CLOSES_FDS_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-DAEMON_DETACH_CLOSES_FDS_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
-
-m4_define([DAEMON_DETACH_MONITOR_CLOSES_FDS_PYN],
-  [AT_SETUP([daemon --detach --monitor closes standard fds - $1])
-   AT_SKIP_IF([test $2 = no])
-   # Skip this test for Windows, uses Linux specific kill signal
-   AT_SKIP_IF([test "$IS_WIN32" = "yes"])
-   AT_CHECK([(yes 2>stderr; echo $? > status) | $3 $srcdir/test-daemon.py --pidfile --detach --no-chdir], [0], [], [])
-   AT_CHECK([kill $(cat test-daemon.py.pid)])
-   AT_CHECK([test -s status])
-   if grep '[[bB]]roken pipe' stderr >/dev/null 2>&1; then
-     # Something in the environment caused SIGPIPE to be ignored, but
-     # 'yes' at least told us that it got EPIPE.  Good enough; we know
-     # that stdout was closed.
-     :
-   else
-     # Otherwise make sure that 'yes' died from SIGPIPE.
-     AT_CHECK([kill -l `cat status`], [0], [PIPE
+fi
+AT_CLEANUP
+
+AT_SETUP([daemon --detach --monitor closes standard fds - Python3])
+# Skip this test for Windows, uses Linux specific kill signal
+AT_SKIP_IF([test "$IS_WIN32" = "yes"])
+AT_CHECK([(yes 2>stderr; echo $? > status) | $PYTHON3 $srcdir/test-daemon.py --pidfile --detach --no-chdir], [0], [], [])
+AT_CHECK([kill $(cat test-daemon.py.pid)])
+AT_CHECK([test -s status])
+if grep '[[bB]]roken pipe' stderr >/dev/null 2>&1; then
+  # Something in the environment caused SIGPIPE to be ignored, but
+  # 'yes' at least told us that it got EPIPE.  Good enough; we know
+  # that stdout was closed.
+  :
+else
+  # Otherwise make sure that 'yes' died from SIGPIPE.
+  AT_CHECK([kill -l `cat status`], [0], [PIPE
 ])
-   fi
-   AT_CLEANUP])
-
-DAEMON_DETACH_MONITOR_CLOSES_FDS_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-DAEMON_DETACH_MONITOR_CLOSES_FDS_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
+fi
+AT_CLEANUP
diff --git a/tests/flowgen.py b/tests/flowgen.py
index 976fe7a97c98..7ef32d13cb40 100755
--- a/tests/flowgen.py
+++ b/tests/flowgen.py
@@ -1,4 +1,4 @@
-#! /usr/bin/env python
+#! /usr/bin/env python3
 
 # Copyright (c) 2009, 2010, 2011, 2012, 2015, 2017 Nicira, Inc.
 #
diff --git a/tests/interface-reconfigure.at b/tests/interface-reconfigure.at
index 035b0095642a..f4ceb284af4d 100644
--- a/tests/interface-reconfigure.at
+++ b/tests/interface-reconfigure.at
@@ -681,7 +681,7 @@ EOF
 }
 
 ifr_run () {
-    $PYTHON ./interface-reconfigure --root-prefix="`pwd`" --no-syslog "$@"
+    $PYTHON3 ./interface-reconfigure --root-prefix="`pwd`" --no-syslog "$@"
 }
 
 ifr_filter () {
diff --git a/tests/json.at b/tests/json.at
index bfe0f1967c4a..527ce8e64033 100644
--- a/tests/json.at
+++ b/tests/json.at
@@ -8,45 +8,21 @@ m4_define([JSON_CHECK_POSITIVE_C],
 ])
    AT_CLEANUP])
 
-# JSON_CHECK_POSITIVE_PY(TITLE, INPUT, OUTPUT, TEST-JSON-ARGS,
-#                        PYTHON-CHCEK, PYTHON-BIN)
+# JSON_CHECK_POSITIVE_PY(TITLE, INPUT, OUTPUT, TEST-JSON-ARGS)
 #
 m4_define([JSON_CHECK_POSITIVE_PY],
   [AT_SETUP([$1])
    AT_KEYWORDS([json positive Python])
-   AT_SKIP_IF([test $5 = no])
    AT_CHECK([printf %s "AS_ESCAPE([$2])" > input])
    AT_CAPTURE_FILE([input])
-   AT_CHECK([$6 $srcdir/test-json.py $4 input], [0], [stdout], [])
-   AT_CHECK([cat stdout], [0], [$3
-])
-   AT_CLEANUP])
-
-m4_define([JSON_CHECK_POSITIVE_UCS4PY],
-  [AT_SETUP([$1])
-   AT_KEYWORDS([json positive Python])
-   AT_SKIP_IF([test $HAVE_PYTHON2 = no])
-   AT_XFAIL_IF([test $HAVE_PYTHON2 = yes &&
-                $PYTHON2 -c "exit(len(u'\U00010800'))"; test $? -ne 1])
-   AT_CHECK([printf %s "AS_ESCAPE([$2])" > input])
-   AT_CAPTURE_FILE([input])
-   AT_CHECK([$PYTHON2 $srcdir/test-json.py $4 input], [0], [stdout], [])
+   AT_CHECK([$PYTHON3 $srcdir/test-json.py $4 input], [0], [stdout], [])
    AT_CHECK([cat stdout], [0], [$3
 ])
    AT_CLEANUP])
 
 m4_define([JSON_CHECK_POSITIVE],
   [JSON_CHECK_POSITIVE_C([$1 - C], [$2], [$3], [$4])
-   JSON_CHECK_POSITIVE_PY([$1 - Python2], [$2], [$3], [$4],
-                          [$HAVE_PYTHON2], [$PYTHON2])
-   JSON_CHECK_POSITIVE_PY([$1 - Python3], [$2], [$3], [$4],
-                          [$HAVE_PYTHON3], [$PYTHON3])])
-
-m4_define([JSON_CHECK_POSITIVE_PY23],
-  [JSON_CHECK_POSITIVE_PY([$1 - Python2], [$2], [$3], [$4],
-                          [$HAVE_PYTHON2], [$PYTHON2])
-   JSON_CHECK_POSITIVE_PY([$1 - Python3], [$2], [$3], [$4],
-                          [$HAVE_PYTHON3], [$PYTHON3])])
+   JSON_CHECK_POSITIVE_PY([$1 - Python3], [$2], [$3], [$4])])
 
 m4_define([JSON_CHECK_NEGATIVE_C],
   [AT_SETUP([$1])
@@ -58,26 +34,21 @@ m4_define([JSON_CHECK_NEGATIVE_C],
 ])
    AT_CLEANUP])
 
-# JSON_CHECK_NEGATIVE_PY(TITLE, INPUT, OUTPUT, TEST-JSON-ARGS,
-#                        PYTHON-CHCEK, PYTHON-BIN)
+# JSON_CHECK_NEGATIVE_PY(TITLE, INPUT, OUTPUT, TEST-JSON-ARGS)
 #
 m4_define([JSON_CHECK_NEGATIVE_PY], 
   [AT_SETUP([$1])
    AT_KEYWORDS([json negative Python])
-   AT_SKIP_IF([test $5 = no])
    AT_CHECK([printf %s "AS_ESCAPE([$2])" > input])
    AT_CAPTURE_FILE([input])
-   AT_CHECK([$6 $srcdir/test-json.py $4 input], [1], [stdout], [])
+   AT_CHECK([$PYTHON3 $srcdir/test-json.py $4 input], [1], [stdout], [])
    AT_CHECK([[sed 's/^error: [^:]*:/error:/' < stdout]], [0], [$3
 ])
    AT_CLEANUP])
 
 m4_define([JSON_CHECK_NEGATIVE],
   [JSON_CHECK_NEGATIVE_C([$1 - C], [$2], [$3], [$4])
-   JSON_CHECK_NEGATIVE_PY([$1 - Python2], [$2], [$3], [$4],
-                          [$HAVE_PYTHON2], [$PYTHON2])
-   JSON_CHECK_NEGATIVE_PY([$1 - Python3], [$2], [$3], [$4],
-                          [$HAVE_PYTHON3], [$PYTHON3])])
+   JSON_CHECK_NEGATIVE_PY([$1 - Python3], [$2], [$3], [$4])])
 
 AT_BANNER([JSON -- arrays])
 
@@ -109,9 +80,6 @@ JSON_CHECK_POSITIVE([Unicode escape sequences],
 JSON_CHECK_POSITIVE_C([surrogate pairs - C],
   [[["\ud834\udd1e"]]],
   [[["𝄞"]]])
-JSON_CHECK_POSITIVE_UCS4PY([surrogate pairs - Python],
-  [[["\ud834\udd1e"]]],
-  [[["𝄞"]]])
 JSON_CHECK_NEGATIVE([a string by itself is not valid JSON], ["xxx"],
                     [error: syntax error at beginning of input])
 JSON_CHECK_NEGATIVE([end of line in quoted string],
@@ -154,15 +122,6 @@ AT_CHECK([printf '"xxx' | ovstest test-json -], [1],
 ])
 AT_CLEANUP
 
-AT_SETUP([end of input in quoted string - Python])
-AT_KEYWORDS([json negative Python])
-AT_SKIP_IF([test $HAVE_PYTHON2 = no])
-AT_CHECK([printf '"xxx' > input
-$PYTHON2 $srcdir/test-json.py input], [1],
-  [error: line 0, column 4, byte 4: unexpected end of input in quoted string
-])
-AT_CLEANUP
-
 AT_BANNER([JSON -- objects])
 
 JSON_CHECK_POSITIVE([empty object], [[{ }]], [[{}]])
@@ -227,7 +186,7 @@ JSON_CHECK_POSITIVE_C(
   [C - large integers that overflow to reals],
   [[[9223372036854775807000, -92233720368547758080000]]],
   [[[9.22337203685478e+21,-9.22337203685478e+22]]])
-JSON_CHECK_POSITIVE_PY23(
+JSON_CHECK_POSITIVE_PY(
   [large integers that overflow to reals],
   [[[9223372036854775807000, -92233720368547758080000]]],
   [[[9.223372036854776e+21,-9.223372036854776e+22]]])
@@ -252,7 +211,7 @@ JSON_CHECK_POSITIVE_C(
   [C - +/- DBL_MAX],
   [[[1.7976931348623157e+308, -1.7976931348623157e+308]]],
   [[[1.79769313486232e+308,-1.79769313486232e+308]]])
-JSON_CHECK_POSITIVE_PY23(
+JSON_CHECK_POSITIVE_PY(
   [+/- DBL_MAX],
   [[[1.7976931348623157e+308, -1.7976931348623157e+308]]],
   [[[1.7976931348623157e+308,-1.7976931348623157e+308]]])
diff --git a/tests/jsonrpc-py.at b/tests/jsonrpc-py.at
index e75ac4551006..3a304dad8551 100644
--- a/tests/jsonrpc-py.at
+++ b/tests/jsonrpc-py.at
@@ -1,46 +1,31 @@
-AT_BANNER([JSON-RPC - Python])
+AT_BANNER([JSON-RPC - Python3])
 
-m4_define([JSONRPC_REQ_REPLY_SUCCESS_PYN],
-  [AT_SETUP([JSON-RPC request and successful reply - $1])
-   AT_SKIP_IF([test $2 = no])
-   AT_KEYWORDS([python jsonrpc])
-   AT_CHECK([$3 $srcdir/test-jsonrpc.py --pidfile --detach --no-chdir listen punix:socket])
-   on_exit 'kill `cat test-jsonrpc.py.pid`'
-   AT_CHECK(
-     [[$3 $srcdir/test-jsonrpc.py request unix:socket echo '[{"a": "b", "x": null}]']], [0],
-     [[{"error":null,"id":0,"result":[{"a":"b","x":null}]}
+AT_SETUP([JSON-RPC request and successful reply - Python3])
+AT_KEYWORDS([python jsonrpc])
+AT_CHECK([$PYTHON3 $srcdir/test-jsonrpc.py --pidfile --detach --no-chdir listen punix:socket])
+on_exit 'kill `cat test-jsonrpc.py.pid`'
+AT_CHECK(
+  [[$PYTHON3 $srcdir/test-jsonrpc.py request unix:socket echo '[{"a": "b", "x": null}]']], [0],
+  [[{"error":null,"id":0,"result":[{"a":"b","x":null}]}
 ]])
-   AT_CLEANUP])
+AT_CLEANUP
 
-JSONRPC_REQ_REPLY_SUCCESS_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-JSONRPC_REQ_REPLY_SUCCESS_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
-
-m4_define([JSONRPC_REQ_REPLY_ERROR_PYN],
-  [AT_SETUP([JSON-RPC request and error reply - $1])
-   AT_SKIP_IF([test $2 = no])
-   AT_KEYWORDS([python jsonrpc])
-   AT_CHECK([$3 $srcdir/test-jsonrpc.py --pidfile --detach --no-chdir listen punix:socket])
-   on_exit 'kill `cat test-jsonrpc.py.pid`'
-   AT_CHECK(
-     [[$3 $srcdir/test-jsonrpc.py request unix:socket bad-request '[]']], [0],
-     [[{"error":{"error":"unknown method"},"id":0,"result":null}
+AT_SETUP([JSON-RPC request and error reply - Python3])
+AT_KEYWORDS([python jsonrpc])
+AT_CHECK([$PYTHON3 $srcdir/test-jsonrpc.py --pidfile --detach --no-chdir listen punix:socket])
+on_exit 'kill `cat test-jsonrpc.py.pid`'
+AT_CHECK(
+  [[$PYTHON3 $srcdir/test-jsonrpc.py request unix:socket bad-request '[]']], [0],
+  [[{"error":{"error":"unknown method"},"id":0,"result":null}
 ]])
-   AT_CLEANUP])
-
-JSONRPC_REQ_REPLY_ERROR_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-JSONRPC_REQ_REPLY_ERROR_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
-
-m4_define([JSONRPC_NOTIFICATION_PYN],
-  [AT_SETUP([JSON-RPC notification - $1])
-   AT_SKIP_IF([test $2 = no])
-   AT_KEYWORDS([python jsonrpc])
-   AT_CHECK([$3 $srcdir/test-jsonrpc.py --pidfile --detach --no-chdir listen punix:socket])
-   on_exit 'kill `cat test-jsonrpc.py.pid`'
-   AT_CHECK([test -e test-jsonrpc.py.pid])
-   AT_CHECK([[$3 $srcdir/test-jsonrpc.py notify unix:socket shutdown '[]']])
-   # Wait for test-jsonrpc to die, based on its pidfile disappearing
-   OVS_WAIT_WHILE([test -e test-jsonrpc.py.pid])
-   AT_CLEANUP])
+AT_CLEANUP
 
-JSONRPC_NOTIFICATION_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-JSONRPC_NOTIFICATION_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
+AT_SETUP([JSON-RPC notification - Python3])
+AT_KEYWORDS([python jsonrpc])
+AT_CHECK([$PYTHON3 $srcdir/test-jsonrpc.py --pidfile --detach --no-chdir listen punix:socket])
+on_exit 'kill `cat test-jsonrpc.py.pid`'
+AT_CHECK([test -e test-jsonrpc.py.pid])
+AT_CHECK([[$PYTHON3 $srcdir/test-jsonrpc.py notify unix:socket shutdown '[]']])
+# Wait for test-jsonrpc to die, based on its pidfile disappearing
+OVS_WAIT_WHILE([test -e test-jsonrpc.py.pid])
+AT_CLEANUP
diff --git a/tests/library.at b/tests/library.at
index ecb9268d40df..ac4ea4abf281 100644
--- a/tests/library.at
+++ b/tests/library.at
@@ -1,7 +1,7 @@
 AT_BANNER([library unit tests])
 
 AT_SETUP([flow extractor])
-AT_CHECK([$PYTHON $srcdir/flowgen.py >/dev/null])
+AT_CHECK([$PYTHON3 $srcdir/flowgen.py >/dev/null])
 AT_CHECK([ovstest test-flows flows pcap], [0], [checked 247 packets, 0 errors
 ])
 AT_CLEANUP
@@ -176,37 +176,29 @@ AT_CHECK([mkdir $longname || exit 77])
 AT_CHECK([cd $longname && ovstest test-unix-socket ../$longname/socket socket])
 AT_CLEANUP
 
-m4_define([UNIX_SOCKET_SHORT_PATHNAME_PYN],
-  [AT_SETUP([unix socket, short pathname - $1])
-   AT_SKIP_IF([test $2 = no || test "$IS_WIN32" = "yes"])
-   AT_KEYWORDS([python unixsocket])
-   AT_CHECK([$3 $srcdir/test-unix-socket.py x])
-   AT_CLEANUP])
-
-UNIX_SOCKET_SHORT_PATHNAME_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-UNIX_SOCKET_SHORT_PATHNAME_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
+AT_SETUP([unix socket, short pathname - Python3])
+AT_SKIP_IF([test "$IS_WIN32" = "yes"])
+AT_KEYWORDS([python unixsocket])
+AT_CHECK([$PYTHON3 $srcdir/test-unix-socket.py x])
+AT_CLEANUP
 
 dnl Unix sockets with long names are problematic because the name has to
 dnl go in a fixed-length field in struct sockaddr_un.  Generally the limit
 dnl is about 100 bytes.  On Linux, we work around this by indirecting through
 dnl a directory fd using /proc/self/fd/<dirfd>.  We do not have a workaround
 dnl for other platforms, so we skip the test there.
-m4_define([UNIX_SOCKET_LONG_PATHNAME_PYN],
-  [AT_SETUP([unix socket, long pathname - $1])
-   AT_SKIP_IF([test $2 = no || test "$IS_WIN32" = "yes"])
-   AT_KEYWORDS([python unixsocket])
-   dnl Linux sockaddr_un has a 108-byte limit, so this needs to be longer.
-   dnl Linux "ecryptfs" has a 143-byte limit, so we use that many bytes.
-   longname=01234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012
-
-   dnl Skip the test if the directory can't be created (presumably the file
-   dnl system doesn't support such long names).
-   AT_CHECK([mkdir $longname || exit 77])
-   AT_CHECK([cd $longname && $3 $abs_srcdir/test-unix-socket.py ../$longname/socket socket])
-   AT_CLEANUP])
+AT_SETUP([unix socket, long pathname - Python3])
+AT_SKIP_IF([test "$IS_WIN32" = "yes"])
+AT_KEYWORDS([python unixsocket])
+dnl Linux sockaddr_un has a 108-byte limit, so this needs to be longer.
+dnl Linux "ecryptfs" has a 143-byte limit, so we use that many bytes.
+longname=01234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012
 
-UNIX_SOCKET_LONG_PATHNAME_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-UNIX_SOCKET_LONG_PATHNAME_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
+dnl Skip the test if the directory can't be created (presumably the file
+dnl system doesn't support such long names).
+AT_CHECK([mkdir $longname || exit 77])
+AT_CHECK([cd $longname && $PYTHON3 $abs_srcdir/test-unix-socket.py ../$longname/socket socket])
+AT_CLEANUP
 
 AT_SETUP([ovs_assert])
 if test "$IS_WIN32" = "yes"; then
diff --git a/tests/ofproto-dpif.at b/tests/ofproto-dpif.at
index b530d5782e96..8d99088580fd 100644
--- a/tests/ofproto-dpif.at
+++ b/tests/ofproto-dpif.at
@@ -5394,7 +5394,7 @@ AT_CHECK([strip_xids < stdout | sed -n 's/duration=[[0-9]]*\.[[0-9]]*s/duration=
 ])
 
 # The packet should be received by port 2
-AT_CHECK([test 1 = `$PYTHON "$top_srcdir/utilities/ovs-pcap.in" p2-tx.pcap | wc -l`])
+AT_CHECK([test 1 = `$PYTHON3 "$top_srcdir/utilities/ovs-pcap.in" p2-tx.pcap | wc -l`])
 
 OVS_VSWITCHD_STOP
 AT_CLEANUP
@@ -5429,7 +5429,7 @@ AT_CHECK([strip_xids < stdout | sed -n 's/duration=[[0-9]]*\.[[0-9]]*s/duration=
 ])
 
 # The packet should be received by port 2
-AT_CHECK([test 1 = `$PYTHON "$top_srcdir/utilities/ovs-pcap.in" p2-tx.pcap | wc -l`])
+AT_CHECK([test 1 = `$PYTHON3 "$top_srcdir/utilities/ovs-pcap.in" p2-tx.pcap | wc -l`])
 
 OVS_VSWITCHD_STOP
 AT_CLEANUP
@@ -5470,7 +5470,7 @@ AT_CHECK([strip_xids < stdout | sed -n 's/duration=[[0-9]]*\.[[0-9]]*s/duration=
 ])
 
 # The packet should be received by port 1
-AT_CHECK([test 1 = `$PYTHON "$top_srcdir/utilities/ovs-pcap.in" p1-tx.pcap | wc -l`])
+AT_CHECK([test 1 = `$PYTHON3 "$top_srcdir/utilities/ovs-pcap.in" p1-tx.pcap | wc -l`])
 
 OVS_VSWITCHD_STOP
 AT_CLEANUP
@@ -5506,8 +5506,8 @@ ovs-vsctl show
 ovs-ofctl dump-flows br0
 
 # The packet should be received by port 2 and not port 3
-AT_CHECK([test 1 = `$PYTHON "$top_srcdir/utilities/ovs-pcap.in" p2-tx.pcap | wc -l`])
-AT_CHECK([test 0 = `$PYTHON "$top_srcdir/utilities/ovs-pcap.in" p3-tx.pcap | wc -l`])
+AT_CHECK([test 1 = `$PYTHON3 "$top_srcdir/utilities/ovs-pcap.in" p2-tx.pcap | wc -l`])
+AT_CHECK([test 0 = `$PYTHON3 "$top_srcdir/utilities/ovs-pcap.in" p3-tx.pcap | wc -l`])
 
 # NXT_RESUMEs should be 1 and reg1 should be set to 0x5.
 OVS_WAIT_UNTIL([test 1 = `cat ofctl_monitor*.log | grep NXT_RESUME | grep -c reg1=0x5`])
diff --git a/tests/ofproto.at b/tests/ofproto.at
index a810dd6042fd..c81409d9d17c 100644
--- a/tests/ofproto.at
+++ b/tests/ofproto.at
@@ -4769,7 +4769,7 @@ m4_divert_push([PREPARE_TESTS])
 # past the nearest line that does not start with a space.
 [
 multiline_sort () {
-    $PYTHON -c '
+    $PYTHON3 -c '
 import sys
 
 buffer = []
@@ -5056,7 +5056,7 @@ ovs-appctl -t ovs-ofctl ofctl/block
 
 # Add $n_msgs flows.
 (echo "in_port=2,actions=output:2"
-$PYTHON -c '
+$PYTHON3 -c '
 for i in range('$n_msgs'):
     print("cookie=1,reg1=%d,actions=drop" % i)
 ') > flows.txt
diff --git a/tests/ovs-macros.at b/tests/ovs-macros.at
index b6add7fda5e1..e07c4b908e0a 100644
--- a/tests/ovs-macros.at
+++ b/tests/ovs-macros.at
@@ -184,7 +184,7 @@ wc () {
 }
 
 uuidfilt () {
-    $PYTHON "$top_srcdir"/tests/uuidfilt.py "$@"
+    $PYTHON3 "$top_srcdir"/tests/uuidfilt.py "$@"
 }
 
 # run_as PROGRAM_NAME COMMAND [ARG...]
diff --git a/tests/ovs-xapi-sync.at b/tests/ovs-xapi-sync.at
index 2f00704ba9a8..ab96c4d53e23 100644
--- a/tests/ovs-xapi-sync.at
+++ b/tests/ovs-xapi-sync.at
@@ -1,7 +1,6 @@
 AT_BANNER([ovs-xapi-sync])
 
 AT_SETUP([ovs-xapi-sync])
-AT_SKIP_IF([test $HAVE_PYTHON = no])
 
 # Mock up the XenAPI.
 cp "$top_srcdir/tests/MockXenAPI.py" XenAPI.py
@@ -26,7 +25,7 @@ ovs_vsctl () {
 OVS_VSCTL_SETUP
 
 # Start ovs-xapi-sync.
-AT_CHECK([$PYTHON ./ovs-xapi-sync "--pidfile=ovs-xapi-sync.pid" \
+AT_CHECK([$PYTHON3 ./ovs-xapi-sync "--pidfile=ovs-xapi-sync.pid" \
                   "--root-prefix=`pwd`" unix:db.sock >log 2>&1 &])
 AT_CAPTURE_FILE([log])
 
diff --git a/tests/ovsdb-data.at b/tests/ovsdb-data.at
index 8c40bcfbfc27..8cd2a26cb3ff 100644
--- a/tests/ovsdb-data.at
+++ b/tests/ovsdb-data.at
@@ -260,7 +260,7 @@ dnl
 dnl <C0> is not allowed anywhere in a UTF-8 string.
 dnl (<ED A0 80> is not allowed in UTF-8 but Python doesn't care.)
 dnl <ED 80 7F> is not allowed in UTF-8.
-OVSDB_CHECK_POSITIVE_PY([no invalid UTF-8 sequences in strings - Python],
+OVSDB_CHECK_POSITIVE_PY3([no invalid UTF-8 sequences in strings - Python],
   [parse-atoms '[["string"]]' \
      '@<:@"m4_esyscmd([printf "\300"])"@:>@' \
      '@<:@"m4_esyscmd([printf "\355\200\177"])"@:>@' \
@@ -533,12 +533,7 @@ OVSDB_CHECK_POSITIVE_CPY([strings at least 2 characters long],
 constraint violation: "a" length 1 is less than minimum allowed length 2
 "ab"
 "abc"
-constraint violation: "𝄞" length 1 is less than minimum allowed length 2]],
-  [],
-  [],
-  [dnl This test requires a wide build of Python.
-   AT_CHECK([$PYTHON -c 'unichr(0x10000)' || exit 77],
-            [0], [ignore], [ignore])])
+constraint violation: "𝄞" length 1 is less than minimum allowed length 2]])
 
 OVSDB_CHECK_POSITIVE_CPY([strings no more than 2 characters long],
   [[parse-atoms '{"type": "string", "maxLength": 2}' \
diff --git a/tests/ovsdb-idl.at b/tests/ovsdb-idl.at
index 7c937f74276b..cc38d69c106c 100644
--- a/tests/ovsdb-idl.at
+++ b/tests/ovsdb-idl.at
@@ -112,74 +112,52 @@ m4_define([OVSDB_CHECK_IDL_TCP6_C],
    AT_CLEANUP])
 
 # same as OVSDB_CHECK_IDL but uses the Python IDL implementation.
-m4_define([OVSDB_CHECK_IDL_PYN],
-  [AT_SETUP([$1])
-   AT_SKIP_IF([test $7 = no])
+m4_define([OVSDB_CHECK_IDL_PY],
+  [AT_SETUP([$1 - Python3])
    AT_KEYWORDS([ovsdb server idl positive Python $5])
    AT_CHECK([ovsdb_start_idltest])
    m4_if([$2], [], [],
      [AT_CHECK([ovsdb-client transact unix:socket $2], [0], [ignore], [ignore])])
-   AT_CHECK([$8 $srcdir/test-ovsdb.py  -t10 idl $srcdir/idltest.ovsschema unix:socket $3],
+   AT_CHECK([$PYTHON3 $srcdir/test-ovsdb.py  -t10 idl $srcdir/idltest.ovsschema unix:socket $3],
             [0], [stdout], [ignore])
    AT_CHECK([sort stdout | uuidfilt]m4_if([$6],,, [[| $6]]),
             [0], [$4])
    OVSDB_SERVER_SHUTDOWN
    AT_CLEANUP])
 
-m4_define([OVSDB_CHECK_IDL_PY],
-   [OVSDB_CHECK_IDL_PYN([$1 - Python2], [$2], [$3], [$4], [$5], [$6],
-                        [$HAVE_PYTHON2], [$PYTHON2])
-    OVSDB_CHECK_IDL_PYN([$1 - Python3], [$2], [$3], [$4], [$5], [$6],
-                        [$HAVE_PYTHON3], [$PYTHON3])])
-
-m4_define([OVSDB_CHECK_IDL_REGISTER_COLUMNS_PYN],
-  [AT_SETUP([$1 - register_columns])
-   AT_SKIP_IF([test $7 = no])
+m4_define([OVSDB_CHECK_IDL_REGISTER_COLUMNS_PY],
+  [AT_SETUP([$1 - Python3 - register_columns])
    AT_KEYWORDS([ovsdb server idl positive Python register_columns $5])
    AT_CHECK([ovsdb_start_idltest])
    m4_if([$2], [], [],
      [AT_CHECK([ovsdb-client transact unix:socket $2], [0], [ignore], [ignore])])
-   AT_CHECK([$8 $srcdir/test-ovsdb.py  -t10 idl $srcdir/idltest.ovsschema unix:socket ?simple:b,ba,i,ia,r,ra,s,sa,u,ua?link1:i,k,ka,l2?link2:i,l1?singleton:name $3],
+   AT_CHECK([$PYTHON3 $srcdir/test-ovsdb.py  -t10 idl $srcdir/idltest.ovsschema unix:socket ?simple:b,ba,i,ia,r,ra,s,sa,u,ua?link1:i,k,ka,l2?link2:i,l1?singleton:name $3],
             [0], [stdout], [ignore])
    AT_CHECK([sort stdout | uuidfilt]m4_if([$6],,, [[| $6]]),
             [0], [$4])
    OVSDB_SERVER_SHUTDOWN
    AT_CLEANUP])
 
-m4_define([OVSDB_CHECK_IDL_REGISTER_COLUMNS_PY],
-   [OVSDB_CHECK_IDL_REGISTER_COLUMNS_PYN([$1 - Python2], [$2], [$3], [$4], [$5], [$6],
-                        [$HAVE_PYTHON2], [$PYTHON2])
-    OVSDB_CHECK_IDL_REGISTER_COLUMNS_PYN([$1 - Python3], [$2], [$3], [$4], [$5], [$6],
-                        [$HAVE_PYTHON3], [$PYTHON3])])
-
 # same as OVSDB_CHECK_IDL but uses the Python IDL implementation with tcp
-m4_define([OVSDB_CHECK_IDL_TCP_PYN],
-  [AT_SETUP([$1 - tcp])
-   AT_SKIP_IF([test $7 = no])
+m4_define([OVSDB_CHECK_IDL_TCP_PY],
+  [AT_SETUP([$1 - Python3 - tcp])
    AT_KEYWORDS([ovsdb server idl positive Python with tcp socket $5])
    AT_CHECK([ovsdb_start_idltest "ptcp:0:127.0.0.1"])
    PARSE_LISTENING_PORT([ovsdb-server.log], [TCP_PORT])
 
    m4_if([$2], [], [],
      [AT_CHECK([ovsdb-client transact tcp:127.0.0.1:$TCP_PORT $2], [0], [ignore], [ignore])])
-   AT_CHECK([$8 $srcdir/test-ovsdb.py  -t10 idl $srcdir/idltest.ovsschema tcp:127.0.0.1:$TCP_PORT $3],
+   AT_CHECK([$PYTHON3 $srcdir/test-ovsdb.py  -t10 idl $srcdir/idltest.ovsschema tcp:127.0.0.1:$TCP_PORT $3],
             [0], [stdout], [ignore])
    AT_CHECK([sort stdout | uuidfilt]m4_if([$6],,, [[| $6]]),
             [0], [$4])
    OVSDB_SERVER_SHUTDOWN
    AT_CLEANUP])
 
-m4_define([OVSDB_CHECK_IDL_TCP_PY],
-   [OVSDB_CHECK_IDL_TCP_PYN([$1 - Python2], [$2], [$3], [$4], [$5], [$6],
-                        [$HAVE_PYTHON2], [$PYTHON2])
-    OVSDB_CHECK_IDL_TCP_PYN([$1 - Python3], [$2], [$3], [$4], [$5], [$6],
-                        [$HAVE_PYTHON3], [$PYTHON3])])
-
 # same as OVSDB_CHECK_IDL but uses the Python IDL implementation with tcp
 # with multiple remotes with only one remote reachable
-m4_define([OVSDB_CHECK_IDL_TCP_MULTIPLE_REMOTES_PYN],
-  [AT_SETUP([$1 - tcp])
-   AT_SKIP_IF([test $7 = no])
+m4_define([OVSDB_CHECK_IDL_TCP_MULTIPLE_REMOTES_PY],
+  [AT_SETUP([$1 - Python3 (multiple remotes) - tcp])
    AT_KEYWORDS([ovsdb server idl positive Python with tcp socket $5])
    AT_CHECK([ovsdb_start_idltest "ptcp:0:127.0.0.1"])
    PARSE_LISTENING_PORT([ovsdb-server.log], [TCP_PORT])
@@ -188,23 +166,16 @@ m4_define([OVSDB_CHECK_IDL_TCP_MULTIPLE_REMOTES_PYN],
    remote=tcp:127.0.0.1:$WRONG_PORT_1,tcp:127.0.0.1:$TCP_PORT,tcp:127.0.0.1:$WRONG_PORT_2
    m4_if([$2], [], [],
      [AT_CHECK([ovsdb-client transact tcp:127.0.0.1:$TCP_PORT $2], [0], [ignore], [ignore])])
-   AT_CHECK([$8 $srcdir/test-ovsdb.py  -t20 idl $srcdir/idltest.ovsschema $remote $3],
+   AT_CHECK([$PYTHON3 $srcdir/test-ovsdb.py  -t20 idl $srcdir/idltest.ovsschema $remote $3],
             [0], [stdout], [ignore])
    AT_CHECK([sort stdout | uuidfilt]m4_if([$6],,, [[| $6]]),
             [0], [$4])
    OVSDB_SERVER_SHUTDOWN
    AT_CLEANUP])
 
-m4_define([OVSDB_CHECK_IDL_TCP_MULTIPLE_REMOTES_PY],
-   [OVSDB_CHECK_IDL_TCP_MULTIPLE_REMOTES_PYN([$1 - Python2 (multiple remotes)], [$2], [$3], [$4], [$5], [$6],
-                        [$HAVE_PYTHON], [$PYTHON])
-    OVSDB_CHECK_IDL_TCP_MULTIPLE_REMOTES_PYN([$1 - Python3 (multiple remotes)], [$2], [$3], [$4], [$5], [$6],
-                        [$HAVE_PYTHON3], [$PYTHON3])])
-
 # same as OVSDB_CHECK_IDL but uses the Python IDL implementation with tcp6
-m4_define([OVSDB_CHECK_IDL_TCP6_PYN],
-  [AT_SETUP([$1 - tcp6])
-   AT_SKIP_IF([test $7 = no])
+m4_define([OVSDB_CHECK_IDL_TCP6_PY],
+  [AT_SETUP([$1 - Python3 - tcp6])
    AT_SKIP_IF([test "$IS_WIN32" = "yes"])
    AT_SKIP_IF([test $HAVE_IPV6 = no])
    AT_KEYWORDS([ovsdb server idl positive Python with tcp6 socket $5])
@@ -214,22 +185,15 @@ m4_define([OVSDB_CHECK_IDL_TCP6_PYN],
 
    m4_if([$2], [], [],
      [AT_CHECK([ovsdb-client transact "tcp:[[::1]]:$TCP_PORT" $2], [0], [ignore], [ignore])])
-   AT_CHECK([$8 $srcdir/test-ovsdb.py  -t10 idl $srcdir/idltest.ovsschema tcp:[[::1]]:$TCP_PORT $3],
+   AT_CHECK([$PYTHON3 $srcdir/test-ovsdb.py  -t10 idl $srcdir/idltest.ovsschema tcp:[[::1]]:$TCP_PORT $3],
             [0], [stdout], [ignore])
    AT_CHECK([sort stdout | uuidfilt]m4_if([$6],,, [[| $6]]),
             [0], [$4])
    OVSDB_SERVER_SHUTDOWN
    AT_CLEANUP])
 
-m4_define([OVSDB_CHECK_IDL_TCP6_PY],
-   [OVSDB_CHECK_IDL_TCP6_PYN([$1 - Python2], [$2], [$3], [$4], [$5], [$6],
-                        [$HAVE_PYTHON2], [$PYTHON2])
-    OVSDB_CHECK_IDL_TCP6_PYN([$1 - Python3], [$2], [$3], [$4], [$5], [$6],
-                        [$HAVE_PYTHON3], [$PYTHON3])])
-
-m4_define([OVSDB_CHECK_IDL_TCP6_MULTIPLE_REMOTES_PYN],
-  [AT_SETUP([$1 - tcp6])
-   AT_SKIP_IF([test $7 = no])
+m4_define([OVSDB_CHECK_IDL_TCP6_MULTIPLE_REMOTES_PY],
+  [AT_SETUP([$1 - Python3 - tcp6])
    AT_SKIP_IF([test "$IS_WIN32" = "yes"])
    AT_SKIP_IF([test $HAVE_IPV6 = no])
    AT_KEYWORDS([ovsdb server idl positive Python with tcp6 socket $5])
@@ -240,25 +204,18 @@ m4_define([OVSDB_CHECK_IDL_TCP6_MULTIPLE_REMOTES_PYN],
    remote="tcp:[[::1]]:$WRONG_PORT_1,tcp:[[::1]]:$TCP_PORT,tcp:[[::1]]:$WRONG_PORT_2"
    m4_if([$2], [], [],
      [AT_CHECK([ovsdb-client transact "tcp:[[::1]]:$TCP_PORT" $2], [0], [ignore], [ignore])])
-   AT_CHECK([$8 $srcdir/test-ovsdb.py  -t20 idl $srcdir/idltest.ovsschema $remote $3],
+   AT_CHECK([$PYTHON3 $srcdir/test-ovsdb.py  -t20 idl $srcdir/idltest.ovsschema $remote $3],
             [0], [stdout], [ignore])
    AT_CHECK([sort stdout | uuidfilt]m4_if([$6],,, [[| $6]]),
             [0], [$4])
    OVSDB_SERVER_SHUTDOWN
    AT_CLEANUP])
 
-m4_define([OVSDB_CHECK_IDL_TCP6_MULTIPLE_REMOTES_PY],
-   [OVSDB_CHECK_IDL_TCP6_MULTIPLE_REMOTES_PYN([$1 - Python2 (multiple remotes)], [$2], [$3], [$4], [$5], [$6],
-                        [$HAVE_PYTHON], [$PYTHON])
-    OVSDB_CHECK_IDL_TCP6_MULTIPLE_REMOTES_PYN([$1 - Python3 (multiple remotes)], [$2], [$3], [$4], [$5], [$6],
-                        [$HAVE_PYTHON3], [$PYTHON3])])
-
 # same as OVSDB_CHECK_IDL but uses the Python IDL implementation with SSL
-m4_define([OVSDB_CHECK_IDL_SSL_PYN],
-  [AT_SETUP([$1 - SSL])
+m4_define([OVSDB_CHECK_IDL_SSL_PY],
+  [AT_SETUP([$1 - Python3 - SSL])
    AT_SKIP_IF([test "$HAVE_OPENSSL" = no])
-   AT_SKIP_IF([test $7 = no])
-   $8 -c "import OpenSSL.SSL"
+   $PYTHON3 -c "import OpenSSL.SSL"
    SSL_PRESENT=$?
    AT_SKIP_IF([test $SSL_PRESENT != 0])
    AT_KEYWORDS([ovsdb server idl positive Python with ssl socket $5])
@@ -279,7 +236,7 @@ m4_define([OVSDB_CHECK_IDL_SSL_PYN],
                 --certificate=$PKIDIR/testpki-cert2.pem \
                 --ca-cert=$PKIDIR/testpki-cacert.pem \
                 transact "ssl:127.0.0.1:$TCP_PORT" $2], [0], [ignore], [ignore])])
-   AT_CHECK([$8 $srcdir/test-ovsdb.py  -t10 idl $srcdir/idltest.ovsschema \
+   AT_CHECK([$PYTHON3 $srcdir/test-ovsdb.py  -t10 idl $srcdir/idltest.ovsschema \
              ssl:127.0.0.1:$TCP_PORT $PKIDIR/testpki-privkey.pem \
              $PKIDIR/testpki-cert.pem $PKIDIR/testpki-cacert.pem $3],
             [0], [stdout], [ignore])
@@ -288,12 +245,6 @@ m4_define([OVSDB_CHECK_IDL_SSL_PYN],
    OVSDB_SERVER_SHUTDOWN
    AT_CLEANUP])
 
-m4_define([OVSDB_CHECK_IDL_SSL_PY],
-   [OVSDB_CHECK_IDL_SSL_PYN([$1 - Python2], [$2], [$3], [$4], [$5], [$6],
-                        [$HAVE_PYTHON], [$PYTHON])
-    OVSDB_CHECK_IDL_SSL_PYN([$1 - Python3], [$2], [$3], [$4], [$5], [$6],
-                        [$HAVE_PYTHON3], [$PYTHON3])])
-
 m4_define([OVSDB_CHECK_IDL],
   [OVSDB_CHECK_IDL_C($@)
    OVSDB_CHECK_IDL_TCP_C($@)
@@ -307,9 +258,8 @@ m4_define([OVSDB_CHECK_IDL],
    OVSDB_CHECK_IDL_SSL_PY($@)])
 
 # This test uses the Python IDL implementation with passive tcp
-m4_define([OVSDB_CHECK_IDL_PASSIVE_TCP_PYN],
-  [AT_SETUP([$1 ptcp])
-   AT_SKIP_IF([test $7 = no])
+m4_define([OVSDB_CHECK_IDL_PASSIVE_TCP_PY],
+  [AT_SETUP([$1 - Python3 - ptcp])
    AT_KEYWORDS([ovsdb server idl positive Python with tcp socket $5])
    # find free TCP port
    AT_CHECK([ovsdb_start_idltest "ptcp:0:127.0.0.1"])
@@ -319,7 +269,7 @@ m4_define([OVSDB_CHECK_IDL_PASSIVE_TCP_PYN],
 
    # start OVSDB server in passive mode
    AT_CHECK([ovsdb_start_idltest "tcp:127.0.0.1:$TCP_PORT"])
-   AT_CHECK([$8 $srcdir/test-ovsdb.py -t10 idl_passive $srcdir/idltest.ovsschema ptcp:127.0.0.1:$TCP_PORT $3],
+   AT_CHECK([$PYTHON3 $srcdir/test-ovsdb.py -t10 idl_passive $srcdir/idltest.ovsschema ptcp:127.0.0.1:$TCP_PORT $3],
       [0], [stdout], [ignore])
    AT_CHECK([sort stdout | uuidfilt]m4_if([$6],,, [[| $6]]),
             [0], [$4])
@@ -327,12 +277,6 @@ m4_define([OVSDB_CHECK_IDL_PASSIVE_TCP_PYN],
    AT_CLEANUP
    ])
 
-m4_define([OVSDB_CHECK_IDL_PASSIVE_TCP_PY],
-    [OVSDB_CHECK_IDL_PASSIVE_TCP_PYN([$1 - Python2], [$2], [$3], [$4], [$5], [$6],
-                        [$HAVE_PYTHON2], [$PYTHON2])
-    OVSDB_CHECK_IDL_PASSIVE_TCP_PYN([$1 - Python3], [$2], [$3], [$4], [$5], [$6],
-                        [$HAVE_PYTHON3], [$PYTHON3])])
-
 OVSDB_CHECK_IDL_PASSIVE_TCP_PY([simple passive idl, initially empty, select empty],
   [],
   [['["idltest",{"op":"select","table":"link1","where":[]}]']],
@@ -501,14 +445,13 @@ OVSDB_CHECK_IDL([simple idl, writing via IDL with unicode],
 003: done
 ]])
 
-m4_define([OVSDB_CHECK_IDL_PYN_WITH_EXPOUT],
-  [AT_SETUP([$1])
-   AT_SKIP_IF([test $7 = no])
+m4_define([OVSDB_CHECK_IDL_PY_WITH_EXPOUT],
+  [AT_SETUP([$1 - Python3])
    AT_KEYWORDS([ovsdb server idl positive Python $5])
    AT_CHECK([ovsdb_start_idltest])
    m4_if([$2], [], [],
      [AT_CHECK([ovsdb-client transact unix:socket $2], [0], [ignore], [ignore])])
-   AT_CHECK([$8 $srcdir/test-ovsdb.py  -t10 idl $srcdir/idltest.ovsschema unix:socket $3],
+   AT_CHECK([$PYTHON3 $srcdir/test-ovsdb.py  -t10 idl $srcdir/idltest.ovsschema unix:socket $3],
             [0], [stdout], [ignore])
    echo "$4" > expout
    AT_CHECK([sort stdout | uuidfilt]m4_if([$6],,, [[| $6]]),
@@ -516,12 +459,6 @@ m4_define([OVSDB_CHECK_IDL_PYN_WITH_EXPOUT],
    OVSDB_SERVER_SHUTDOWN
    AT_CLEANUP])
 
-m4_define([OVSDB_CHECK_IDL_PY_WITH_EXPOUT],
-   [OVSDB_CHECK_IDL_PYN_WITH_EXPOUT([$1 - Python2], [$2], [$3], [$4], [$5], [$6],
-                                    [$HAVE_PYTHON2], [$PYTHON2])
-    OVSDB_CHECK_IDL_PYN_WITH_EXPOUT([$1 - Python3], [$2], [$3], [$4], [$5], [$6],
-                                    [$HAVE_PYTHON3], [$PYTHON3])])
-
 OVSDB_CHECK_IDL_PY_WITH_EXPOUT([simple idl, writing large data via IDL with unicode],
   [['["idltest",
       {"op": "insert",
@@ -1036,26 +973,19 @@ AT_CHECK([grep '"monitor\|monitor_cond"' stderr | grep -c '"ua"'], [0], [1
 OVSDB_SERVER_SHUTDOWN
 AT_CLEANUP
 
-m4_define([OVSDB_CHECK_IDL_FETCH_COLUMNS_PYN],
-  [AT_SETUP([$1 fetch])
-   AT_SKIP_IF([test $8 = no])
+m4_define([OVSDB_CHECK_IDL_FETCH_COLUMNS_PY],
+  [AT_SETUP([$1 - Python3 - fetch])
    AT_KEYWORDS([ovsdb server idl positive Python increment fetch $6])
    AT_CHECK([ovsdb_start_idltest])
    m4_if([$2], [], [],
      [AT_CHECK([ovsdb-client transact unix:socket $2], [0], [ignore], [ignore])])
-   AT_CHECK([$9 $srcdir/test-ovsdb.py  -t10 idl $srcdir/idltest.ovsschema unix:socket [$3] $4],
+   AT_CHECK([$PYTHON3 $srcdir/test-ovsdb.py  -t10 idl $srcdir/idltest.ovsschema unix:socket [$3] $4],
             [0], [stdout], [ignore])
    AT_CHECK([sort stdout | uuidfilt]m4_if([$7],,, [[| $7]]),
             [0], [$5])
    OVSDB_SERVER_SHUTDOWN
    AT_CLEANUP])
 
-m4_define([OVSDB_CHECK_IDL_FETCH_COLUMNS_PY],
-    [OVSDB_CHECK_IDL_FETCH_COLUMNS_PYN([$1 - Python2], [$2], [$3], [$4], [$5], [$6], [$7],
-                        [$HAVE_PYTHON2], [$PYTHON2])
-    OVSDB_CHECK_IDL_FETCH_COLUMNS_PYN([$1 - Python3], [$2], [$3], [$4], [$5], [$6], [$7],
-                        [$HAVE_PYTHON3], [$PYTHON3])])
-
 m4_define([OVSDB_CHECK_IDL_FETCH_COLUMNS],
    [OVSDB_CHECK_IDL_FETCH_COLUMNS_PY($@)])
 
@@ -1087,26 +1017,18 @@ OVSDB_CHECK_IDL_FETCH_COLUMNS([simple idl, initially populated],
 003: done
 ]])
 
-m4_define([OVSDB_CHECK_IDL_WO_MONITOR_COND_PYN],
-  [AT_SETUP([$1])
-   AT_SKIP_IF([test $6 = no])
+m4_define([OVSDB_CHECK_IDL_WO_MONITOR_COND_PY],
+  [AT_SETUP([$1 - Python3])
    AT_KEYWORDS([ovsdb server idl Python monitor $4])
    AT_CHECK([ovsdb_start_idltest])
    AT_CHECK([ovs-appctl -t ovsdb-server ovsdb-server/disable-monitor-cond])
-   AT_CHECK([$7 $srcdir/test-ovsdb.py  -t10 idl $srcdir/idltest.ovsschema unix:socket $2],
+   AT_CHECK([$PYTHON3 $srcdir/test-ovsdb.py  -t10 idl $srcdir/idltest.ovsschema unix:socket $2],
             [0], [stdout], [ignore])
    AT_CHECK([sort stdout | uuidfilt]m4_if([$5],,, [[| $5]]),
             [0], [$3])
    OVSDB_SERVER_SHUTDOWN
    AT_CLEANUP])
 
-m4_define([OVSDB_CHECK_IDL_WO_MONITOR_COND_PY],
-    [OVSDB_CHECK_IDL_WO_MONITOR_COND_PYN([$1 - Python2], [$2], [$3], [$4], [$5],
-                        [$HAVE_PYTHON2], [$PYTHON2])
-    OVSDB_CHECK_IDL_WO_MONITOR_COND_PYN([$1 - Python3], [$2], [$3], [$4], [$5],
-                        [$HAVE_PYTHON3], [$PYTHON3])])
-
-
 m4_define([OVSDB_CHECK_IDL_WO_MONITOR_COND],
    [OVSDB_CHECK_IDL_WO_MONITOR_COND_PY($@)])
 
@@ -1426,28 +1348,9 @@ OVSDB_CHECK_IDL_PY([partial-set idl],
 015: done
 ]])
 
-m4_define([OVSDB_CHECK_IDL_NOTIFY_PYN],
-  [OVSDB_CHECK_IDL_PYN([$1], [], [$2], [$3], [notify $4], [$5], [$6], [$7])])
-
-m4_define([OVSDB_CHECK_IDL_NOTIFY_PY],
-    [OVSDB_CHECK_IDL_NOTIFY_PYN([$1 - Python2], [$2], [$3], [$4], [$5],
-                        [$HAVE_PYTHON2], [$PYTHON2])
-    OVSDB_CHECK_IDL_NOTIFY_PYN([$1 - Python3], [$2], [$3], [$4], [$5],
-                        [$HAVE_PYTHON3], [$PYTHON3])])
-
-# This test uses the Python IDL implementation with ssl
-m4_define([OVSDB_CHECK_IDL_NOTIFY_SSL_PYN],
-  [OVSDB_CHECK_IDL_SSL_PYN([$1], [], [$2], [$3], [notify $4], [$5], [$6], [$7])])
-
-m4_define([OVSDB_CHECK_IDL_NOTIFY_SSL_PY],
-    [OVSDB_CHECK_IDL_NOTIFY_SSL_PYN([$1 - Python2], [$2], [$3], [$4], [$5],
-                        [$HAVE_PYTHON2], [$PYTHON2])
-    OVSDB_CHECK_IDL_NOTIFY_SSL_PYN([$1 - Python3], [$2], [$3], [$4], [$5],
-                        [$HAVE_PYTHON3], [$PYTHON3])])
-
 m4_define([OVSDB_CHECK_IDL_NOTIFY],
-   [OVSDB_CHECK_IDL_NOTIFY_PY($@)
-    OVSDB_CHECK_IDL_NOTIFY_SSL_PY($@)])
+   [OVSDB_CHECK_IDL_PY([$1], [], [$2], [$3], [notify $4], [$5])
+    OVSDB_CHECK_IDL_SSL_PY([$1], [], [$2], [$3], [notify $4], [$5])])
 
 OVSDB_CHECK_IDL_NOTIFY([simple idl verify notify],
   [['track-notify' \
@@ -1878,8 +1781,7 @@ CHECK_STREAM_OPEN_BLOCK([tcp], [127.0.0.1])
 CHECK_STREAM_OPEN_BLOCK([tcp6], [[[::1]]])
 
 m4_define([CHECK_STREAM_OPEN_BLOCK_PY],
-  [AT_SETUP([$1])
-   AT_SKIP_IF([test $2 = no])
+  [AT_SETUP([$1 - Python3])
    AT_KEYWORDS([Check PY Stream open block - $3])
    AT_CHECK([ovsdb_start_idltest "ptcp:0:127.0.0.1"])
    PARSE_LISTENING_PORT([ovsdb-server.log], [TCP_PORT])
@@ -1890,14 +1792,10 @@ m4_define([CHECK_STREAM_OPEN_BLOCK_PY],
    AT_CHECK([$3 $srcdir/test-stream.py tcp:127.0.0.1:$TCP_PORT], [1], [ignore])
    AT_CLEANUP])
 
-CHECK_STREAM_OPEN_BLOCK_PY([Check PY2 Stream open block], [$HAVE_PYTHON2], [$PYTHON2])
-CHECK_STREAM_OPEN_BLOCK_PY([Check PY3 Stream open block], [$HAVE_PYTHON3], [$PYTHON3])
-
 # same as OVSDB_CHECK_IDL but uses Python IDL implementation with tcp
 # with multiple remotes to assert the idl connects to the leader of the Raft cluster
-m4_define([OVSDB_CHECK_IDL_LEADER_ONLY_PYN],
-  [AT_SETUP([$1])
-   AT_SKIP_IF([test $7 = no])
+m4_define([OVSDB_CHECK_IDL_LEADER_ONLY_PY],
+  [AT_SETUP([$1 - Python3 (leader only)])
    AT_KEYWORDS([ovsdb server idl Python leader_only with tcp socket])
    m4_define([LPBK],[127.0.0.1])
    AT_CHECK([ovsdb_cluster_start_idltest $2 "ptcp:0:"LPBK])
@@ -1907,18 +1805,12 @@ m4_define([OVSDB_CHECK_IDL_LEADER_ONLY_PYN],
    remotes=tcp:LPBK:$TCP_PORT_1,tcp:LPBK:$TCP_PORT_2,tcp:LPBK:$TCP_PORT_3
    pids=$(cat s2.pid s3.pid s1.pid | tr '\n' ',')
    echo $pids
-   AT_CHECK([$8 $srcdir/test-ovsdb.py  -t30 idl-cluster $srcdir/idltest.ovsschema $remotes $pids $3],
+   AT_CHECK([$PYTHON3 $srcdir/test-ovsdb.py  -t30 idl-cluster $srcdir/idltest.ovsschema $remotes $pids $3],
         [0], [stdout], [ignore])
    remote=$(ovsdb_cluster_leader $remotes "idltest")
    leader=$(echo $remote | cut -d'|' -f 1)
    AT_CHECK([grep -F -- "${leader}" stdout], [0], [ignore])
    AT_CLEANUP])
 
-m4_define([OVSDB_CHECK_IDL_LEADER_ONLY_PY],
-   [OVSDB_CHECK_IDL_LEADER_ONLY_PYN([$1 - Python2 (leader only)], [$2], [$3], [$4], [$5], [$6],
-                 [$HAVE_PYTHON], [$PYTHON])
-    OVSDB_CHECK_IDL_LEADER_ONLY_PYN([$1 - Python3 (leader only)], [$2], [$3], [$4], [$5], [$6],
-                 [$HAVE_PYTHON3], [$PYTHON3])])
-
 OVSDB_CHECK_IDL_LEADER_ONLY_PY([Check Python IDL connects to leader], 3, ['remote'])
 OVSDB_CHECK_IDL_LEADER_ONLY_PY([Check Python IDL reconnects to leader], 3, ['remote' '+remotestop' 'remote'])
diff --git a/tests/ovsdb-macros.at b/tests/ovsdb-macros.at
index 638894794828..1613642d5a2a 100644
--- a/tests/ovsdb-macros.at
+++ b/tests/ovsdb-macros.at
@@ -27,25 +27,6 @@ m4_define([OVSDB_CHECK_POSITIVE],
    AT_CLEANUP])
 
 # OVSDB_CHECK_POSITIVE_PY(TITLE, TEST-OVSDB-ARGS, OUTPUT, [KEYWORDS], [PREREQ],
-#                         [PY-CHECK])
-#
-# Runs "test-ovsdb.py TEST-OVSDB-ARGS" and checks that it exits with
-# status 0 and prints OUTPUT on stdout.
-#
-# PY-CHECK is expanded before the check.  It can check for features of the
-# Python implementation that are required for the test to pass.
-#
-# TITLE is provided to AT_SETUP and KEYWORDS to AT_KEYWORDS.
-m4_define([OVSDB_CHECK_POSITIVE_PY],
-  [AT_SETUP([$1])
-   AT_SKIP_IF([test $HAVE_PYTHON2 = no])
-   $6
-   AT_KEYWORDS([ovsdb positive Python $4])
-   AT_CHECK([$PYTHON2 $srcdir/test-ovsdb.py $2], [0], [$3
-], [])
-   AT_CLEANUP])
-
-# OVSDB_CHECK_POSITIVE_PY3(TITLE, TEST-OVSDB-ARGS, OUTPUT, [KEYWORDS], [PREREQ],
 #                          [PY-CHECK])
 #
 # Runs "test-ovsdb.py TEST-OVSDB-ARGS" and checks that it exits with
@@ -55,9 +36,8 @@ m4_define([OVSDB_CHECK_POSITIVE_PY],
 # Python implementation that are required for the test to pass.
 #
 # TITLE is provided to AT_SETUP and KEYWORDS to AT_KEYWORDS.
-m4_define([OVSDB_CHECK_POSITIVE_PY3],
+m4_define([OVSDB_CHECK_POSITIVE_PY],
   [AT_SETUP([$1])
-   AT_SKIP_IF([test $HAVE_PYTHON3 = no])
    $6
    AT_KEYWORDS([ovsdb positive Python $4])
    AT_CHECK([$PYTHON3 $srcdir/test-ovsdb.py $2], [0], [$3
@@ -65,13 +45,12 @@ m4_define([OVSDB_CHECK_POSITIVE_PY3],
    AT_CLEANUP])
 
 # OVSDB_CHECK_POSITIVE_CPY(TITLE, TEST-OVSDB-ARGS, OUTPUT, [KEYWORDS],
-#                          [PREREQ], [PY2-CHECK], [PY3-CHECK])
+#                          [PREREQ], [PY3-CHECK])
 #
 # Runs identical C and Python tests, as specified.
 m4_define([OVSDB_CHECK_POSITIVE_CPY],
   [OVSDB_CHECK_POSITIVE([$1 - C], [$2], [$3], [$4], [$5])
-   OVSDB_CHECK_POSITIVE_PY([$1 - Python2], [$2], [$3], [$4], [$5], [$6])
-   OVSDB_CHECK_POSITIVE_PY3([$1 - Python3], [$2], [$3], [$4], [$5], [$7])])
+   OVSDB_CHECK_POSITIVE_PY([$1 - Python3], [$2], [$3], [$4], [$5], [$7])])
 
 # OVSDB_CHECK_NEGATIVE(TITLE, TEST-OVSDB-ARGS, OUTPUT, [KEYWORDS], [PREREQ])
 #
@@ -100,28 +79,6 @@ m4_define([OVSDB_CHECK_NEGATIVE],
 # TITLE is provided to AT_SETUP and KEYWORDS to AT_KEYWORDS.
 m4_define([OVSDB_CHECK_NEGATIVE_PY],
   [AT_SETUP([$1])
-   AT_SKIP_IF([test $HAVE_PYTHON2 = no])
-   AT_KEYWORDS([ovsdb negative $4])
-   AT_CHECK([$PYTHON2 $srcdir/test-ovsdb.py $2], [1], [], [stderr])
-   m4_assert(m4_len([$3]))
-   AT_CHECK(
-     [if grep -F -e "AS_ESCAPE([$3])" stderr
-      then
-        :
-      else
-        exit 99
-      fi],
-            [0], [ignore], [ignore])
-   AT_CLEANUP])
-
-# OVSDB_CHECK_NEGATIVE_PY3(TITLE, TEST-OVSDB-ARGS, OUTPUT, [KEYWORDS], [PREREQ])
-#
-# Runs "test-ovsdb TEST-OVSDB-ARGS" and checks that it exits with
-# status 1 and that its output on stdout contains substring OUTPUT.
-# TITLE is provided to AT_SETUP and KEYWORDS to AT_KEYWORDS.
-m4_define([OVSDB_CHECK_NEGATIVE_PY],
-  [AT_SETUP([$1])
-   AT_SKIP_IF([test $HAVE_PYTHON3 = no])
    AT_KEYWORDS([ovsdb negative $4])
    AT_CHECK([$PYTHON3 $srcdir/test-ovsdb.py $2], [1], [], [stderr])
    m4_assert(m4_len([$3]))
@@ -141,8 +98,7 @@ m4_define([OVSDB_CHECK_NEGATIVE_PY],
 # Runs identical C and Python tests, as specified.
 m4_define([OVSDB_CHECK_NEGATIVE_CPY],
   [OVSDB_CHECK_NEGATIVE([$1 - C], [$2], [$3], [$4], [$5])
-   OVSDB_CHECK_NEGATIVE_PY([$1 - Python2], [$2], [$3], [$4], [$5])
-   OVSDB_CHECK_NEGATIVE_PY3([$1 - Python3], [$2], [$3], [$4], [$5])])
+   OVSDB_CHECK_NEGATIVE_PY([$1 - Python3], [$2], [$3], [$4], [$5])])
 
 OVS_START_SHELL_HELPERS
 ovsdb_client_wait() {
diff --git a/tests/ovsdb-monitor.at b/tests/ovsdb-monitor.at
index eb437092c918..3b622b3ec059 100644
--- a/tests/ovsdb-monitor.at
+++ b/tests/ovsdb-monitor.at
@@ -30,7 +30,7 @@ ovsdb_check_monitor () {
     done
     OVS_APP_EXIT_AND_WAIT_BY_TARGET([ovsdb-server], [ovsdb-server.pid])
     OVS_WAIT_UNTIL([test ! -e ovsdb-client.pid])
-    AT_CHECK_UNQUOTED([$PYTHON $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0], [$output], [ignore])
+    AT_CHECK_UNQUOTED([$PYTHON3 $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0], [$output], [ignore])
 }
 OVS_END_SHELL_HELPERS
 
@@ -105,7 +105,7 @@ m4_define([OVSDB_CHECK_MONITOR_COND],
             [ignore], [ignore])
    AT_CHECK([ovs-appctl -t ovsdb-server -e exit], [0], [ignore], [ignore])
    OVS_WAIT_UNTIL([test ! -e ovsdb-server.pid && test ! -e ovsdb-client.pid])
-   AT_CHECK([$PYTHON $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0], [$7], [ignore])
+   AT_CHECK([$PYTHON3 $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0], [$7], [ignore])
    AT_CLEANUP])
 
 OVSDB_CHECK_MONITOR([monitor insert into empty table],
@@ -649,7 +649,7 @@ AT_CHECK([ovsdb-client transact unix:socket '[["ordinals"]]'], [0],
          [ignore], [ignore])
 AT_CHECK([ovs-appctl -t ovsdb-server -e exit], [0], [ignore], [ignore])
 OVS_WAIT_UNTIL([test ! -e ovsdb-server.pid && test ! -e ovsdb-client.pid])
-AT_CHECK([$PYTHON $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0], [[row,action,name
+AT_CHECK([$PYTHON3 $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0], [[row,action,name
 <0>,insert,"""ten"""
 
 row,action,name
@@ -701,7 +701,7 @@ AT_CHECK([ovsdb-client transact unix:socket '[["ordinals"]]'], [0],
          [ignore], [ignore])
 AT_CHECK([ovs-appctl -t ovsdb-server -e exit], [0], [ignore], [ignore])
 OVS_WAIT_UNTIL([test ! -e ovsdb-server.pid && test ! -e ovsdb-client.pid])
-AT_CHECK([$PYTHON $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0],
+AT_CHECK([$PYTHON3 $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0],
          [[found: false, last_id: <0>
 row,action,name,number,_version
 <1>,initial,"""one""",1,"[""uuid"",""<2>""]"
@@ -770,7 +770,7 @@ AT_CHECK([ovsdb-client transact unix:socket '[["ordinals"]]'], [0],
          [ignore], [ignore])
 AT_CHECK([ovs-appctl -t ovsdb-server -e exit], [0], [ignore], [ignore])
 OVS_WAIT_UNTIL([test ! -e ovsdb-server.pid && test ! -e ovsdb-client.pid])
-AT_CHECK([$PYTHON $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0],
+AT_CHECK([$PYTHON3 $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0],
          [[found: true, last_id: <0>
 row,action,name,number,_version
 <1>,insert,"""ten""",10,"[""uuid"",""<2>""]"
@@ -814,7 +814,7 @@ AT_CHECK([ovsdb-client transact unix:socket '[["ordinals"]]'], [0],
          [ignore], [ignore])
 AT_CHECK([ovs-appctl -t ovsdb-server -e exit], [0], [ignore], [ignore])
 OVS_WAIT_UNTIL([test ! -e ovsdb-server.pid && test ! -e ovsdb-client.pid])
-AT_CHECK([$PYTHON $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0],
+AT_CHECK([$PYTHON3 $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0],
          [[found: true, last_id: <0>
 ]], [ignore])
 AT_CLEANUP
@@ -837,7 +837,7 @@ AT_CHECK([ovsdb-client transact unix:socket '[["ordinals"]]'], [0],
          [ignore], [ignore])
 AT_CHECK([ovs-appctl -t ovsdb-server -e exit], [0], [ignore], [ignore])
 OVS_WAIT_UNTIL([test ! -e ovsdb-server.pid && test ! -e ovsdb-client.pid])
-AT_CHECK([$PYTHON $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0],
+AT_CHECK([$PYTHON3 $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0],
          [[found: false, last_id: <0>
 ]], [ignore])
 AT_CLEANUP
@@ -876,7 +876,7 @@ AT_CHECK([ovsdb-client transact unix:socket '[["ordinals"]]'], [0],
          [ignore], [ignore])
 AT_CHECK([ovs-appctl -t ovsdb-server -e exit], [0], [ignore], [ignore])
 OVS_WAIT_UNTIL([test ! -e ovsdb-server.pid && test ! -e ovsdb-client.pid])
-AT_CHECK([$PYTHON $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0],
+AT_CHECK([$PYTHON3 $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0],
          [[found: false, last_id: <0>
 row,action,name,number,_version
 <1>,initial,"""one""",1,"[""uuid"",""<2>""]"
@@ -945,7 +945,7 @@ OVS_WAIT_UNTIL([test ! -e ovsdb-server.pid && test ! -e ovsdb-client.pid])
 
 # Transaction shouldn't be found, and last_id returned should always
 # be the same (all zero uuid)
-AT_CHECK([$PYTHON $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0],
+AT_CHECK([$PYTHON3 $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0],
          [[found: false, last_id: <0>
 row,action,name,number,_version
 <1>,initial,"""one""",1,"[""uuid"",""<2>""]"
@@ -1000,7 +1000,7 @@ OVS_WAIT_UNTIL([test ! -e ovsdb-server.pid && test ! -e ovsdb-client.pid])
 
 # Transaction shouldn't be found, and last_id returned should always
 # be the same (all zero uuid)
-AT_CHECK([$PYTHON $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0],
+AT_CHECK([$PYTHON3 $srcdir/ovsdb-monitor-sort.py < output | uuidfilt], [0],
          [[found: false, last_id: <0>
 row,action,name,number,_version
 <1>,initial,"""one""",1,"[""uuid"",""<2>""]"
diff --git a/tests/reconnect.at b/tests/reconnect.at
index ecd76cbc582d..2631658be08a 100644
--- a/tests/reconnect.at
+++ b/tests/reconnect.at
@@ -2,28 +2,19 @@ AT_BANNER([reconnect library])
 
 m4_define([__RECONNECT_CHECK],
   [AT_SETUP([$1])
-   $2
    AT_KEYWORDS([reconnect])
-   AT_DATA([input], [$3])
-   AT_CHECK([$4], [0], [$5])
+   AT_DATA([input], [$2])
+   AT_CHECK([$3], [0], [$4])
    AT_CLEANUP])
 
 m4_define([RECONNECT_CHECK],
   [__RECONNECT_CHECK(
      [$1 - C],
-     [],
      [$2],
      [ovstest test-reconnect < input],
      [$3])
-   __RECONNECT_CHECK(
-     [$1 - Python2],
-     [AT_SKIP_IF([test $HAVE_PYTHON2 = no])],
-     [$2],
-     [$PYTHON2 $srcdir/test-reconnect.py < input],
-     [$3])
    __RECONNECT_CHECK(
      [$1 - Python3],
-     [AT_SKIP_IF([test $HAVE_PYTHON3 = no])],
      [$2],
      [$PYTHON3 $srcdir/test-reconnect.py < input],
      [$3])])
diff --git a/tests/system-common-macros.at b/tests/system-common-macros.at
index 64bf5ec63ab4..68c8774d1ac6 100644
--- a/tests/system-common-macros.at
+++ b/tests/system-common-macros.at
@@ -267,7 +267,7 @@ m4_define([OVS_CHECK_FIREWALL],
 #
 m4_define([OVS_START_L7],
    [PIDFILE=$(mktemp $2XXX.pid)
-    NETNS_DAEMONIZE([$1], [[$PYTHON $srcdir/test-l7.py $2]], [$PIDFILE])
+    NETNS_DAEMONIZE([$1], [[$PYTHON3 $srcdir/test-l7.py $2]], [$PIDFILE])
 
     dnl netstat doesn't print http over IPv6 as "http6"; drop the number.
     PROTO=$(echo $2 | sed -e 's/\([[a-zA-Z]]*\).*/\1/')
diff --git a/tests/system-kmod-macros.at b/tests/system-kmod-macros.at
index 48e94642b948..7155d63f2ce3 100644
--- a/tests/system-kmod-macros.at
+++ b/tests/system-kmod-macros.at
@@ -59,8 +59,7 @@ m4_define([CONFIGURE_VETH_OFFLOADS],
 # kernel conntrack tables when the test is finished.
 #
 m4_define([CHECK_CONNTRACK],
-    [AT_SKIP_IF([test $HAVE_PYTHON = no])
-     m4_foreach([mod], [[nf_conntrack_ipv4], [nf_conntrack_ipv6], [nf_nat_ftp],
+    [m4_foreach([mod], [[nf_conntrack_ipv4], [nf_conntrack_ipv6], [nf_nat_ftp],
                         [nf_nat_tftp]],
                 [modprobe mod || echo "Module mod not loaded."
                  on_exit 'modprobe -r mod'
diff --git a/tests/system-traffic.at b/tests/system-traffic.at
index c2276f7d7415..e0fc3d6010d8 100644
--- a/tests/system-traffic.at
+++ b/tests/system-traffic.at
@@ -3524,8 +3524,8 @@ table=0,action=normal
 
 AT_CHECK([ovs-ofctl --bundle replace-flows br0 flows.txt])
 
-NETNS_DAEMONIZE([at_ns0], [[$PYTHON $srcdir/test-l7.py ftp]], [ftp1.pid])
-NETNS_DAEMONIZE([at_ns1], [[$PYTHON $srcdir/test-l7.py ftp]], [ftp0.pid])
+NETNS_DAEMONIZE([at_ns0], [[$PYTHON3 $srcdir/test-l7.py ftp]], [ftp1.pid])
+NETNS_DAEMONIZE([at_ns1], [[$PYTHON3 $srcdir/test-l7.py ftp]], [ftp0.pid])
 OVS_WAIT_UNTIL([ip netns exec at_ns1 netstat -l | grep ftp])
 
 dnl FTP requests from p0->p1 should work fine.
@@ -5291,7 +5291,7 @@ dnl waiting, we get occasional failures due to the following error:
 dnl "connect: Cannot assign requested address"
 OVS_WAIT_UNTIL([ip netns exec at_ns0 ping6 -c 1 fc00::2 >/dev/null])
 
-NETNS_DAEMONIZE([at_ns1], [[$PYTHON $srcdir/test-l7.py ftp]], [ftp0.pid])
+NETNS_DAEMONIZE([at_ns1], [[$PYTHON3 $srcdir/test-l7.py ftp]], [ftp0.pid])
 OVS_WAIT_UNTIL([ip netns exec at_ns1 netstat -l | grep ftp])
 
 dnl FTP requests from p0->p1 should work fine.
@@ -5942,7 +5942,7 @@ sleep 1
 dnl The hex dump is a TCP syn packet. pkt=eth/ip/tcp
 dnl The packet is sent from p0(at_ns0) interface directed to
 dnl p1(at_ns1) interface
-NS_CHECK_EXEC([at_ns0], [$PYTHON $srcdir/sendpkt.py p0 f2 00 00 00 00 02 f2 00 00 00 00 01 08 00 45 00 00 28 00 01 00 00 40 06 b0 13 c0 a8 00 0a 0a 00 00 0a 04 00 08 00 00 00 00 c8 00 00 00 00 50 02 20 00 b8 5e 00 00 > /dev/null])
+NS_CHECK_EXEC([at_ns0], [$PYTHON3 $srcdir/sendpkt.py p0 f2 00 00 00 00 02 f2 00 00 00 00 01 08 00 45 00 00 28 00 01 00 00 40 06 b0 13 c0 a8 00 0a 0a 00 00 0a 04 00 08 00 00 00 00 c8 00 00 00 00 50 02 20 00 b8 5e 00 00 > /dev/null])
 
 dnl Check the expected nsh encapsulated packet on the egress interface
 OVS_WAIT_UNTIL([cat p1.pcap | egrep "0x0000: *f2ff *0000 *0002 *f2ff *0000 *0001 *894f *0fc6" 2>&1 1>/dev/null])
@@ -5974,7 +5974,7 @@ sleep 1
 dnl The hex dump is NSH packet with TCP syn payload. pkt=eth/nsh/eth/ip/tcp
 dnl The packet is sent from p0(at_ns0) interface directed to
 dnl p1(at_ns1) interface
-NS_CHECK_EXEC([at_ns0], [$PYTHON $srcdir/sendpkt.py p0 f2 ff 00 00 00 02 f2 ff 00 00 00 01 89 4f 02 06 01 03 00 00 64 03 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 f2 00 00 00 00 02 f2 00 00 00 00 01 08 00 45 00 00 28 00 01 00 00 40 06 b0 13 c0 a8 00 0a 0a 00 00 0a 04 00 08 00 00 00 00 c8 00 00 00 00 50 02 20 00 b8 5e 00 00 > /dev/null])
+NS_CHECK_EXEC([at_ns0], [$PYTHON3 $srcdir/sendpkt.py p0 f2 ff 00 00 00 02 f2 ff 00 00 00 01 89 4f 02 06 01 03 00 00 64 03 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 f2 00 00 00 00 02 f2 00 00 00 00 01 08 00 45 00 00 28 00 01 00 00 40 06 b0 13 c0 a8 00 0a 0a 00 00 0a 04 00 08 00 00 00 00 c8 00 00 00 00 50 02 20 00 b8 5e 00 00 > /dev/null])
 
 dnl Check the expected de-capsulated TCP packet on the egress interface
 OVS_WAIT_UNTIL([cat p1.pcap | egrep "0x0000: *f200 *0000 *0002 *f200 *0000 *0001 *0800 *4500" 2>&1 1>/dev/null])
@@ -6007,7 +6007,7 @@ dnl The hex dump is NSH packet with TCP syn payload. pkt=eth/nsh/eth/ip/tcp
 dnl The nsh_ttl is 8, nsh_spi is 0x100 and nsh_si is 3
 dnl The packet is sent from p0(at_ns0) interface directed to
 dnl p1(at_ns1) interface
-NS_CHECK_EXEC([at_ns0], [$PYTHON $srcdir/sendpkt.py p0 f2 ff 00 00 00 02 f2 ff 00 00 00 01 89 4f 02 06 01 03 00 01 00 03 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 f2 00 00 00 00 02 f2 00 00 00 00 01 08 00 45 00 00 28 00 01 00 00 40 06 b0 13 c0 a8 00 0a 0a 00 00 0a 04 00 08 00 00 00 00 c8 00 00 00 00 50 02 20 00 b8 5e 00 00 > /dev/null])
+NS_CHECK_EXEC([at_ns0], [$PYTHON3 $srcdir/sendpkt.py p0 f2 ff 00 00 00 02 f2 ff 00 00 00 01 89 4f 02 06 01 03 00 01 00 03 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 f2 00 00 00 00 02 f2 00 00 00 00 01 08 00 45 00 00 28 00 01 00 00 40 06 b0 13 c0 a8 00 0a 0a 00 00 0a 04 00 08 00 00 00 00 c8 00 00 00 00 50 02 20 00 b8 5e 00 00 > /dev/null])
 
 dnl Check the expected NSH packet with new fields in the header
 OVS_WAIT_UNTIL([cat p1.pcap | egrep "0x0000: *f2ff *0000 *0002 *f2ff *0000* 0001 *894f *01c6" 2>&1 1>/dev/null])
@@ -6041,7 +6041,7 @@ NS_CHECK_EXEC([at_ns2], [tcpdump -l -n -xx -U -i p2 > p2.pcap &])
 sleep 1
 
 dnl First send packet from at_ns0 --> OVS with SPI=0x100 and SI=2
-NS_CHECK_EXEC([at_ns0], [$PYTHON $srcdir/sendpkt.py p0 f2 ff 00 00 00 02 f2 ff 00 00 00 01 89 4f 02 06 01 03 00 01 00 02 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 f2 00 00 00 00 02 f2 00 00 00 00 01 08 00 45 00 00 28 00 01 00 00 40 06 b0 13 c0 a8 00 0a 0a 00 00 0a 04 00 08 00 00 00 00 c8 00 00 00 00 50 02 20 00 b8 5e 00 00 > /dev/null])
+NS_CHECK_EXEC([at_ns0], [$PYTHON3 $srcdir/sendpkt.py p0 f2 ff 00 00 00 02 f2 ff 00 00 00 01 89 4f 02 06 01 03 00 01 00 02 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 f2 00 00 00 00 02 f2 00 00 00 00 01 08 00 45 00 00 28 00 01 00 00 40 06 b0 13 c0 a8 00 0a 0a 00 00 0a 04 00 08 00 00 00 00 c8 00 00 00 00 50 02 20 00 b8 5e 00 00 > /dev/null])
 
 dnl Check for the above packet on p1 interface
 OVS_WAIT_UNTIL([cat p1.pcap | egrep "0x0000: *f2ff *0000 *0002 *f2ff *0000 *0001 *894f *0206" 2>&1 1>/dev/null])
@@ -6052,7 +6052,7 @@ OVS_WAIT_UNTIL([cat p1.pcap | egrep "0x0040: *c0a8 *000a *0a00 *000a *0400 *0800
 OVS_WAIT_UNTIL([cat p1.pcap | egrep "0x0050: *0000 *0000 *5002 *2000 *b85e *0000" 2>&1 1>/dev/null])
 
 dnl Send the second packet from at_ns1 --> OVS with SPI=0x100 and SI=1
-NS_CHECK_EXEC([at_ns1], [$PYTHON $srcdir/sendpkt.py p1 f2 ff 00 00 00 02 f2 ff 00 00 00 01 89 4f 01 c6 01 03 00 01 00 01 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 f2 00 00 00 00 02 f2 00 00 00 00 01 08 00 45 00 00 28 00 01 00 00 40 06 b0 13 c0 a8 00 0a 0a 00 00 0a 04 00 08 00 00 00 00 c8 00 00 00 00 50 02 20 00 b8 5e 00 00 > /dev/null])
+NS_CHECK_EXEC([at_ns1], [$PYTHON3 $srcdir/sendpkt.py p1 f2 ff 00 00 00 02 f2 ff 00 00 00 01 89 4f 01 c6 01 03 00 01 00 01 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 f2 00 00 00 00 02 f2 00 00 00 00 01 08 00 45 00 00 28 00 01 00 00 40 06 b0 13 c0 a8 00 0a 0a 00 00 0a 04 00 08 00 00 00 00 c8 00 00 00 00 50 02 20 00 b8 5e 00 00 > /dev/null])
 
 dnl Check for the above packet on p2 interface
 OVS_WAIT_UNTIL([cat p2.pcap | egrep "0x0000: *f2ff *0000 *0002 *f2ff *0000 *0001 *894f *01c6" 2>&1 1>/dev/null])
diff --git a/tests/system-userspace-macros.at b/tests/system-userspace-macros.at
index a411e3d8919d..d5e3375bc12d 100644
--- a/tests/system-userspace-macros.at
+++ b/tests/system-userspace-macros.at
@@ -64,9 +64,7 @@ m4_define([CONFIGURE_VETH_OFFLOADS],
 #
 # Perform requirements checks for running conntrack tests.
 #
-m4_define([CHECK_CONNTRACK],
-    [AT_SKIP_IF([test $HAVE_PYTHON = no])]
-)
+m4_define([CHECK_CONNTRACK], [])
 
 # CHECK_CONNTRACK_ALG()
 #
diff --git a/tests/unixctl-py.at b/tests/unixctl-py.at
index 5c28e2c01df2..72400611822d 100644
--- a/tests/unixctl-py.at
+++ b/tests/unixctl-py.at
@@ -1,122 +1,98 @@
 AT_BANNER([unixctl])
 
 m4_define([APPCTL], [ovs-appctl --timeout 20])
-m4_define([PYAPPCTL_PYN], [$1 $srcdir/appctl.py --timeout 20])
+m4_define([PYAPPCTL_PY], [$PYTHON3 $srcdir/appctl.py --timeout 20])
 
-m4_define([UNIXCTL_EXIT_PYN],
-  [AT_SETUP([unixctl ovs-vswitchd exit - $1])
-   AT_SKIP_IF([test $2 = no])
-   AT_KEYWORDS([python unixctl])
-   OVS_VSWITCHD_START
+AT_SETUP([unixctl ovs-vswitchd exit - Python3])
+AT_KEYWORDS([python unixctl])
+OVS_VSWITCHD_START
 
-   AT_CHECK([PYAPPCTL_PYN([$3]) -t ovs-vswitchd exit], [0], [])
-   OVS_WAIT_WHILE([test -s ovs-vswitchd.pid])
+AT_CHECK([PYAPPCTL_PY -t ovs-vswitchd exit], [0], [])
+OVS_WAIT_WHILE([test -s ovs-vswitchd.pid])
 
-   AT_CHECK([PYAPPCTL_PYN([$3]) -t ovsdb-server exit], [0], [])
-   OVS_WAIT_WHILE([test -s ovsdb-server.pid])
-   AT_CLEANUP])
+AT_CHECK([PYAPPCTL_PY -t ovsdb-server exit], [0], [])
+OVS_WAIT_WHILE([test -s ovsdb-server.pid])
+AT_CLEANUP
 
-UNIXCTL_EXIT_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-UNIXCTL_EXIT_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
+AT_SETUP([unixctl ovs-vswitchd list-commands - Python3])
+OVS_VSWITCHD_START
 
-m4_define([UNIXCTL_LIST_COMMANDS_PYN],
-  [AT_SETUP([unixctl ovs-vswitchd list-commands - $1])
-   AT_SKIP_IF([test $2 = no])
-   OVS_VSWITCHD_START
-
-   AT_CHECK([APPCTL list-commands], [0], [stdout])
-   AT_CHECK([head -1 stdout], [0], [dnl
+AT_CHECK([APPCTL list-commands], [0], [stdout])
+AT_CHECK([head -1 stdout], [0], [dnl
 The available commands are:
 ])
-   mv stdout expout
-   AT_CHECK([PYAPPCTL_PYN([$3]) list-commands], [0], [expout])
-
-   OVS_VSWITCHD_STOP
-   AT_CLEANUP])
+mv stdout expout
+AT_CHECK([PYAPPCTL_PY list-commands], [0], [expout])
 
-UNIXCTL_LIST_COMMANDS_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-UNIXCTL_LIST_COMMANDS_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
+OVS_VSWITCHD_STOP
+AT_CLEANUP]
 
-m4_define([UNIXCTL_ARGS_PYN],
-  [AT_SETUP([unixctl ovs-vswitchd arguments - $1])
-   AT_SKIP_IF([test $2 = no])
-   OVS_VSWITCHD_START
+AT_SETUP([unixctl ovs-vswitchd arguments - Python3])
+OVS_VSWITCHD_START
 
-   AT_CHECK([APPCTL bond/hash], [2], [], [stderr])
-   AT_CHECK([head -1 stderr], [0], [dnl
+AT_CHECK([APPCTL bond/hash], [2], [], [stderr])
+AT_CHECK([head -1 stderr], [0], [dnl
 "bond/hash" command requires at least 1 arguments
 ])
-   sed 's/ovs-appctl/appctl.py/' stderr > experr
-   AT_CHECK([PYAPPCTL_PYN([$3]) bond/hash], [2], [], [experr])
+sed 's/ovs-appctl/appctl.py/' stderr > experr
+AT_CHECK([PYAPPCTL_PY bond/hash], [2], [], [experr])
 
-   AT_CHECK([APPCTL bond/hash mac], [2], [], [stderr])
-   AT_CHECK([head -1 stderr], [0], [dnl
+AT_CHECK([APPCTL bond/hash mac], [2], [], [stderr])
+AT_CHECK([head -1 stderr], [0], [dnl
 invalid mac
 ])
-   sed 's/ovs-appctl/appctl.py/' stderr > experr
-   AT_CHECK([PYAPPCTL_PYN([$3]) bond/hash mac], [2], [], [experr])
+sed 's/ovs-appctl/appctl.py/' stderr > experr
+AT_CHECK([PYAPPCTL_PY bond/hash mac], [2], [], [experr])
 
-   AT_CHECK([APPCTL bond/hash mac vlan], [2], [], [stderr])
-   AT_CHECK([head -1 stderr], [0], [dnl
+AT_CHECK([APPCTL bond/hash mac vlan], [2], [], [stderr])
+AT_CHECK([head -1 stderr], [0], [dnl
 invalid vlan
 ])
-   sed 's/ovs-appctl/appctl.py/' stderr > experr
-   AT_CHECK([PYAPPCTL_PYN([$3]) bond/hash mac vlan], [2], [], [experr])
+sed 's/ovs-appctl/appctl.py/' stderr > experr
+AT_CHECK([PYAPPCTL_PY bond/hash mac vlan], [2], [], [experr])
 
-   AT_CHECK([APPCTL bond/hash mac vlan basis], [2], [], [stderr])
-   AT_CHECK([head -1 stderr], [0], [dnl
+AT_CHECK([APPCTL bond/hash mac vlan basis], [2], [], [stderr])
+AT_CHECK([head -1 stderr], [0], [dnl
 invalid vlan
 ])
-   sed 's/ovs-appctl/appctl.py/' stderr > experr
-   AT_CHECK([PYAPPCTL_PYN([$3]) bond/hash vlan basis], [2], [], [experr])
+sed 's/ovs-appctl/appctl.py/' stderr > experr
+AT_CHECK([PYAPPCTL_PY bond/hash vlan basis], [2], [], [experr])
 
-   AT_CHECK([APPCTL bond/hash mac vlan basis extra], [2], [], [stderr])
-   AT_CHECK([head -1 stderr], [0], [dnl
+AT_CHECK([APPCTL bond/hash mac vlan basis extra], [2], [], [stderr])
+AT_CHECK([head -1 stderr], [0], [dnl
 "bond/hash" command takes at most 3 arguments
 ])
-   sed 's/ovs-appctl/appctl.py/' stderr > experr
-   AT_CHECK([PYAPPCTL_PYN([$3]) bond/hash mac vlan basis extra], [2], [], [experr])
-
-   OVS_VSWITCHD_STOP
-   AT_CLEANUP])
-
-UNIXCTL_ARGS_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-UNIXCTL_ARGS_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
+sed 's/ovs-appctl/appctl.py/' stderr > experr
+AT_CHECK([PYAPPCTL_PY bond/hash mac vlan basis extra], [2], [], [experr])
 
-m4_define([UNIXCTL_BAD_TARGET_PYN],
-  [AT_SETUP([unixctl bad target - $1])
-   AT_SKIP_IF([test $2 = no])
+OVS_VSWITCHD_STOP
+AT_CLEANUP
 
-   AT_CHECK([PYAPPCTL_PYN([$3]) -t bogus doit], [1], [], [stderr])
-   AT_CHECK_UNQUOTED([tail -1 stderr], [0], [dnl
+AT_SETUP([unixctl bad target - Python3])
+AT_CHECK([PYAPPCTL_PY -t bogus doit], [1], [], [stderr])
+AT_CHECK_UNQUOTED([tail -1 stderr], [0], [dnl
 appctl.py: cannot read pidfile "`pwd`/bogus.pid" (No such file or directory)
 ])
-   if test "$IS_WIN32" = "no"; then
-     AT_CHECK([PYAPPCTL_PYN([$3]) -t /bogus/path.pid doit], [1], [], [stderr])
-     AT_CHECK([tail -1 stderr], [0], [dnl
+if test "$IS_WIN32" = "no"; then
+  AT_CHECK([PYAPPCTL_PY -t /bogus/path.pid doit], [1], [], [stderr])
+  AT_CHECK([tail -1 stderr], [0], [dnl
 appctl.py: cannot connect to "/bogus/path.pid" (No such file or directory)
 ])
-   else
-     AT_CHECK([PYAPPCTL_PYN([$3]) -t c:/bogus/path.pid doit], [1], [], [stderr])
-     AT_CHECK([tail -1 stderr], [0], [dnl
+else
+  AT_CHECK([PYAPPCTL_PY -t c:/bogus/path.pid doit], [1], [], [stderr])
+  AT_CHECK([tail -1 stderr], [0], [dnl
 appctl.py: cannot connect to "c:/bogus/path.pid" (No such file or directory)
 ])
-   fi
+fi
+AT_CLEANUP
 
-   AT_CLEANUP])
+AT_SETUP([unixctl server - Python3])
+on_exit 'kill `cat test-unixctl.py.pid`'
+AT_CAPTURE_FILE([`pwd`/test-unixctl.py.log])
+AT_CHECK([$PYTHON3 $srcdir/test-unixctl.py --log-file --pidfile --detach --no-chdir])
 
-UNIXCTL_BAD_TARGET_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-UNIXCTL_BAD_TARGET_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
-
-m4_define([UNIXCTL_SERVER_PYN],
-  [AT_SETUP([unixctl server - $1])
-   AT_SKIP_IF([test $2 = no])
-   on_exit 'kill `cat test-unixctl.py.pid`'
-   AT_CAPTURE_FILE([`pwd`/test-unixctl.py.log])
-   AT_CHECK([$3 $srcdir/test-unixctl.py --log-file --pidfile --detach --no-chdir])
-
-   AT_CHECK([APPCTL -t test-unixctl.py help], [0], [stdout])
-   AT_CHECK([cat stdout], [0], [dnl
+AT_CHECK([APPCTL -t test-unixctl.py help], [0], [stdout])
+AT_CHECK([cat stdout], [0], [dnl
 The available commands are:
   block
   echo                    [[arg ...]]
@@ -130,63 +106,55 @@ The available commands are:
   vlog/reopen
   vlog/set                spec
 ])
-   mv stdout expout
-   AT_CHECK([PYAPPCTL_PYN([$3]) -t test-unixctl.py help], [0], [expout])
+mv stdout expout
+AT_CHECK([PYAPPCTL_PY -t test-unixctl.py help], [0], [expout])
 
-   AT_CHECK([ovs-vsctl --version | sed 's/ovs-vsctl/test-unixctl.py/' | head -1 > expout])
-   AT_CHECK([APPCTL -t test-unixctl.py version], [0], [expout])
-   AT_CHECK([PYAPPCTL_PYN([$3]) -t test-unixctl.py version], [0], [expout])
+AT_CHECK([ovs-vsctl --version | sed 's/ovs-vsctl/test-unixctl.py/' | head -1 > expout])
+AT_CHECK([APPCTL -t test-unixctl.py version], [0], [expout])
+AT_CHECK([PYAPPCTL_PY -t test-unixctl.py version], [0], [expout])
 
-   AT_CHECK([APPCTL -t test-unixctl.py echo robot ninja], [0], [stdout])
-   AT_CHECK([cat stdout | sed -e "s/u'/'/g"], [0], [dnl
+AT_CHECK([APPCTL -t test-unixctl.py echo robot ninja], [0], [stdout])
+AT_CHECK([cat stdout | sed -e "s/u'/'/g"], [0], [dnl
 [['robot', 'ninja']]
 ])
-   mv stdout expout
-   AT_CHECK([PYAPPCTL_PYN([$3]) -t test-unixctl.py echo robot ninja], [0], [expout])
+mv stdout expout
+AT_CHECK([PYAPPCTL_PY -t test-unixctl.py echo robot ninja], [0], [expout])
 
-   AT_CHECK([APPCTL -t test-unixctl.py echo_error robot ninja], [2], [], [stderr])
-   AT_CHECK([cat stderr | sed -e "s/u'/'/g"], [0], [dnl
+AT_CHECK([APPCTL -t test-unixctl.py echo_error robot ninja], [2], [], [stderr])
+AT_CHECK([cat stderr | sed -e "s/u'/'/g"], [0], [dnl
 [['robot', 'ninja']]
 ovs-appctl: test-unixctl.py: server returned an error
 ])
-   sed 's/ovs-appctl/appctl.py/' stderr > experr
-   AT_CHECK([PYAPPCTL_PYN([$3]) -t test-unixctl.py echo_error robot ninja], [2], [], [experr])
+sed 's/ovs-appctl/appctl.py/' stderr > experr
+AT_CHECK([PYAPPCTL_PY -t test-unixctl.py echo_error robot ninja], [2], [], [experr])
 
-   AT_CHECK([APPCTL -t test-unixctl.py echo], [2], [], [stderr])
-   AT_CHECK([cat stderr], [0], [dnl
+AT_CHECK([APPCTL -t test-unixctl.py echo], [2], [], [stderr])
+AT_CHECK([cat stderr], [0], [dnl
 "echo" command requires at least 1 arguments
 ovs-appctl: test-unixctl.py: server returned an error
 ])
-   sed 's/ovs-appctl/appctl.py/' stderr > experr
-   AT_CHECK([PYAPPCTL_PYN([$3]) -t test-unixctl.py echo], [2], [], [experr])
+sed 's/ovs-appctl/appctl.py/' stderr > experr
+AT_CHECK([PYAPPCTL_PY -t test-unixctl.py echo], [2], [], [experr])
 
-   AT_CHECK([APPCTL -t test-unixctl.py echo robot ninja pirates], [2], [], [stderr])
-   AT_CHECK([cat stderr], [0], [dnl
+AT_CHECK([APPCTL -t test-unixctl.py echo robot ninja pirates], [2], [], [stderr])
+AT_CHECK([cat stderr], [0], [dnl
 "echo" command takes at most 2 arguments
 ovs-appctl: test-unixctl.py: server returned an error
 ])
-   sed 's/ovs-appctl/appctl.py/' stderr > experr
-   AT_CHECK([PYAPPCTL_PYN([$3]) -t test-unixctl.py echo robot ninja pirates], [2], [], [experr])
+sed 's/ovs-appctl/appctl.py/' stderr > experr
+AT_CHECK([PYAPPCTL_PY -t test-unixctl.py echo robot ninja pirates], [2], [], [experr])
 
-   AT_CHECK([APPCTL -t test-unixctl.py bogus], [2], [], [stderr])
-   AT_CHECK([cat stderr], [0], [dnl
+AT_CHECK([APPCTL -t test-unixctl.py bogus], [2], [], [stderr])
+AT_CHECK([cat stderr], [0], [dnl
 "bogus" is not a valid command
 ovs-appctl: test-unixctl.py: server returned an error
 ])
-   sed 's/ovs-appctl/appctl.py/' stderr > experr
-   AT_CHECK([PYAPPCTL_PYN([$3]) -t test-unixctl.py bogus], [2], [], [experr])
-
-   AT_CHECK([APPCTL -t test-unixctl.py exit])
-   AT_CLEANUP])
-
-UNIXCTL_SERVER_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-UNIXCTL_SERVER_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
+sed 's/ovs-appctl/appctl.py/' stderr > experr
+AT_CHECK([PYAPPCTL_PY -t test-unixctl.py bogus], [2], [], [experr])
 
-m4_define([UNIXCTL_SERVER_ERRORS_PYN],
-  [AT_SETUP([unixctl server errors - $1])
-   AT_SKIP_IF([test $2 = no])
-   AT_CHECK($3 $srcdir/test-unixctl.py --unixctl "`pwd`"/bogus/path, [1], [], [ignore])
-   AT_CLEANUP])
+AT_CHECK([APPCTL -t test-unixctl.py exit])
+AT_CLEANUP
 
-UNIXCTL_SERVER_ERRORS_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-UNIXCTL_SERVER_ERRORS_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
+AT_SETUP([unixctl server errors - Python3])
+AT_CHECK($PYTHON3 $srcdir/test-unixctl.py --unixctl "`pwd`"/bogus/path, [1], [], [ignore])
+AT_CLEANUP
diff --git a/tests/vlog.at b/tests/vlog.at
index 2f532a725647..3e92e70a93c7 100644
--- a/tests/vlog.at
+++ b/tests/vlog.at
@@ -1,14 +1,12 @@
 AT_BANNER([vlog])
 
-m4_define([VLOG_PYN],
-  [AT_SETUP([vlog - $1])
-   AT_SKIP_IF([test $2 = no])
-   AT_CAPTURE_FILE([log_file])
-   AT_CAPTURE_FILE([stderr_log])
-   AT_CHECK([$3 $srcdir/test-vlog.py --log-file log_file \
+AT_SETUP([vlog - Python3])
+AT_CAPTURE_FILE([log_file])
+AT_CAPTURE_FILE([stderr_log])
+AT_CHECK([$PYTHON3 $srcdir/test-vlog.py --log-file log_file \
 -v dbg module_1:info module_2:warn syslog:off 2>stderr_log])
 
-   AT_CHECK([sed -e 's/.*-.*-.*T..:..:..Z |//' \
+AT_CHECK([sed -e 's/.*-.*-.*T..:..:..Z |//' \
 -e 's/File ".*", line [[0-9]][[0-9]]*,/File <name>, line <number>,/' \
 stderr_log], [0], [dnl
   0  | module_0 | EMER | emergency
@@ -100,10 +98,7 @@ Traceback (most recent call last):
 AssertionError
 ])
 
-   AT_CLEANUP])
-
-VLOG_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-VLOG_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
+AT_CLEANUP
 
 m4_divert_push([PREPARE_TESTS])
 vlog_filt () {
@@ -146,37 +141,32 @@ message3
 ])
 AT_CLEANUP
 
-m4_define([VLOG_REOPEN_PYN],
-  [AT_SETUP([vlog - vlog/reopen - $1])
-   # This test won't work as-is on Windows because Windows doesn't allow
-   # files that are open to be renamed.
-   AT_SKIP_IF([test "$IS_WIN32" = "yes"])
-   AT_SKIP_IF([test $2 = no])
-   on_exit 'kill `cat test-unixctl.py.pid`'
-
-   AT_CAPTURE_FILE([log])
-   AT_CAPTURE_FILE([log.old])
-   AT_CHECK([$3 $srcdir/test-unixctl.py --log-file=`pwd`/log --pidfile --detach --no-chdir])
-
-   AT_CHECK([APPCTL -t test-unixctl.py log message])
-   mv log log.old
-   AT_CHECK([APPCTL -t test-unixctl.py log message2])
-   AT_CHECK([APPCTL -t test-unixctl.py vlog/reopen])
-   AT_CHECK([APPCTL -t test-unixctl.py log message3])
-   AT_CHECK([APPCTL -t test-unixctl.py exit])
-
-   AT_CHECK([sed 's/.*|//' log.old], [0], [dnl
+AT_SETUP([vlog - vlog/reopen - Python3])
+# This test won't work as-is on Windows because Windows doesn't allow
+# files that are open to be renamed.
+AT_SKIP_IF([test "$IS_WIN32" = "yes"])
+on_exit 'kill `cat test-unixctl.py.pid`'
+
+AT_CAPTURE_FILE([log])
+AT_CAPTURE_FILE([log.old])
+AT_CHECK([$PYTHON3 $srcdir/test-unixctl.py --log-file=`pwd`/log --pidfile --detach --no-chdir])
+
+AT_CHECK([APPCTL -t test-unixctl.py log message])
+mv log log.old
+AT_CHECK([APPCTL -t test-unixctl.py log message2])
+AT_CHECK([APPCTL -t test-unixctl.py vlog/reopen])
+AT_CHECK([APPCTL -t test-unixctl.py log message3])
+AT_CHECK([APPCTL -t test-unixctl.py exit])
+
+AT_CHECK([sed 's/.*|//' log.old], [0], [dnl
  Entering run loop.
  message
  message2
 ])
-   AT_CHECK([sed 's/.*|//' log], [0], [dnl
+AT_CHECK([sed 's/.*|//' log], [0], [dnl
  message3
 ])
-   AT_CLEANUP])
-
-VLOG_REOPEN_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-VLOG_REOPEN_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
+AT_CLEANUP
 
 AT_SETUP([vlog - vlog/reopen without log file - C])
 on_exit 'kill `cat test-unixctl.pid`'
@@ -190,20 +180,15 @@ ovs-appctl: test-unixctl: server returned an error
 OVS_APP_EXIT_AND_WAIT([test-unixctl])
 AT_CLEANUP
 
-m4_define([VLOG_REOPEN_WITHOUT_FILE_PYN],
-  [AT_SETUP([vlog - vlog/reopen without log file - $1])
-   AT_SKIP_IF([test $2 = no])
-   on_exit 'kill `cat test-unixctl.py.pid`'
+AT_SETUP([vlog - vlog/reopen without log file - Python3])
+on_exit 'kill `cat test-unixctl.py.pid`'
 
-   AT_CHECK([$3 $srcdir/test-unixctl.py --pidfile --detach --no-chdir])
+AT_CHECK([$PYTHON3 $srcdir/test-unixctl.py --pidfile --detach --no-chdir])
 
-   AT_CHECK([APPCTL -t test-unixctl.py vlog/reopen], [0],
-     [Logging to file not configured
+AT_CHECK([APPCTL -t test-unixctl.py vlog/reopen], [0],
+  [Logging to file not configured
 ])
-   AT_CLEANUP])
-
-VLOG_REOPEN_WITHOUT_FILE_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-VLOG_REOPEN_WITHOUT_FILE_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
+AT_CLEANUP
 
 dnl This checks that if vlog/reopen can't reopen the log file,
 dnl nothing particularly bad (e.g. a crash) happens.
@@ -243,37 +228,32 @@ AT_CLEANUP
 dnl This checks that if vlog/reopen can't reopen the log file,
 dnl nothing particularly bad (e.g. Python throws an exception and
 dnl aborts the program) happens.
-m4_define([VLOG_CANT_REOPEN_PYN],
-  [AT_SETUP([vlog - vlog/reopen can't reopen log file - $1])
-   AT_SKIP_IF([test $2 = no])
-
-   # Verify that /dev/full is a character device that fails writes.
-   AT_SKIP_IF([test ! -c /dev/full])
-   AT_SKIP_IF([echo > /dev/full])
-
-   on_exit 'kill `cat test-unixctl.py.pid`'
-
-   AT_CHECK([$3 $srcdir/test-unixctl.py --log-file=`pwd`/log --pidfile --detach --no-chdir])
-   AT_CHECK([APPCTL -t test-unixctl.py log message])
-   mv log log.old
-   ln -s /dev/full log
-   AT_CHECK([APPCTL -t test-unixctl.py vlog/reopen])
-   AT_CHECK([APPCTL -t test-unixctl.py log message2])
-   rm log
-   AT_CHECK([APPCTL -t test-unixctl.py vlog/reopen])
-   AT_CHECK([APPCTL -t test-unixctl.py log message3])
-   AT_CHECK([APPCTL -t test-unixctl.py exit])
-   AT_CHECK([sed 's/.*|//' log.old], [0], [dnl
+AT_SETUP([vlog - vlog/reopen can't reopen log file - Python3])
+
+# Verify that /dev/full is a character device that fails writes.
+AT_SKIP_IF([test ! -c /dev/full])
+AT_SKIP_IF([echo > /dev/full])
+
+on_exit 'kill `cat test-unixctl.py.pid`'
+
+AT_CHECK([$PYTHON3 $srcdir/test-unixctl.py --log-file=`pwd`/log --pidfile --detach --no-chdir])
+AT_CHECK([APPCTL -t test-unixctl.py log message])
+mv log log.old
+ln -s /dev/full log
+AT_CHECK([APPCTL -t test-unixctl.py vlog/reopen])
+AT_CHECK([APPCTL -t test-unixctl.py log message2])
+rm log
+AT_CHECK([APPCTL -t test-unixctl.py vlog/reopen])
+AT_CHECK([APPCTL -t test-unixctl.py log message3])
+AT_CHECK([APPCTL -t test-unixctl.py exit])
+AT_CHECK([sed 's/.*|//' log.old], [0], [dnl
  Entering run loop.
  message
 ])
-   AT_CHECK([sed 's/.*|//' log], [0], [dnl
+AT_CHECK([sed 's/.*|//' log], [0], [dnl
  message3
 ])
-   AT_CLEANUP])
-
-VLOG_CANT_REOPEN_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-VLOG_CANT_REOPEN_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
+AT_CLEANUP
 
 AT_SETUP([vlog - vlog/close - C])
 on_exit 'kill `cat test-unixctl.pid`'
@@ -315,44 +295,39 @@ message5
 ])
 AT_CLEANUP
 
-m4_define([VLOG_CLOSE_PYN],
-  [AT_SETUP([vlog - vlog/close - $1])
-   AT_SKIP_IF([test $2 = no])
-   on_exit 'kill `cat test-unixctl.py.pid`'
+AT_SETUP([vlog - vlog/close - Python3])
+on_exit 'kill `cat test-unixctl.py.pid`'
 
-   AT_CAPTURE_FILE([log])
-   AT_CAPTURE_FILE([log.old])
-   AT_CHECK([$3 $srcdir/test-unixctl.py --log-file=`pwd`/log --pidfile --detach --no-chdir])
+AT_CAPTURE_FILE([log])
+AT_CAPTURE_FILE([log.old])
+AT_CHECK([$PYTHON3 $srcdir/test-unixctl.py --log-file=`pwd`/log --pidfile --detach --no-chdir])
 
-   AT_CHECK([APPCTL -t test-unixctl.py log message])
-   AT_CHECK([APPCTL -t test-unixctl.py log message2])
+AT_CHECK([APPCTL -t test-unixctl.py log message])
+AT_CHECK([APPCTL -t test-unixctl.py log message2])
 
-   # After closing the log file, message3 won't appear anywhere.
-   AT_CHECK([APPCTL -t test-unixctl.py vlog/close])
-   mv log log.old
-   AT_CHECK([APPCTL -t test-unixctl.py log message3])
+# After closing the log file, message3 won't appear anywhere.
+AT_CHECK([APPCTL -t test-unixctl.py vlog/close])
+mv log log.old
+AT_CHECK([APPCTL -t test-unixctl.py log message3])
 
-   # Closing the log file again is harmless.
-   AT_CHECK([APPCTL -t test-unixctl.py vlog/close])
-   AT_CHECK([APPCTL -t test-unixctl.py log message4])
+# Closing the log file again is harmless.
+AT_CHECK([APPCTL -t test-unixctl.py vlog/close])
+AT_CHECK([APPCTL -t test-unixctl.py log message4])
 
-   # After reopening the log file, further messages start appearing again.
-   AT_CHECK([APPCTL -t test-unixctl.py vlog/reopen])
-   AT_CHECK([APPCTL -t test-unixctl.py log message5])
-   AT_CHECK([APPCTL -t test-unixctl.py exit])
+# After reopening the log file, further messages start appearing again.
+AT_CHECK([APPCTL -t test-unixctl.py vlog/reopen])
+AT_CHECK([APPCTL -t test-unixctl.py log message5])
+AT_CHECK([APPCTL -t test-unixctl.py exit])
 
-   AT_CHECK([sed 's/.*|//' log.old], [0], [dnl
+AT_CHECK([sed 's/.*|//' log.old], [0], [dnl
  Entering run loop.
  message
  message2
 ])
-   AT_CHECK([sed 's/.*|//' log], [0], [dnl
+AT_CHECK([sed 's/.*|//' log], [0], [dnl
  message5
 ])
-   AT_CLEANUP])
-
-VLOG_CLOSE_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-VLOG_CLOSE_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
+AT_CLEANUP
 
 AT_SETUP([vlog - vlog/set and vlog/list - C])
 on_exit 'kill `cat test-unixctl.pid`'
@@ -400,15 +375,13 @@ AT_CHECK([grep -q 'I<3OVS' log])
 OVS_APP_EXIT_AND_WAIT([test-unixctl])
 AT_CLEANUP
 
-m4_define([VLOG_SET_AND_LIST_PYN],
-  [AT_SETUP([vlog - vlog/set and vlog/list - $1])
-   AT_SKIP_IF([test $2 = no])
-   on_exit 'kill `cat test-unixctl.py.pid`'
+AT_SETUP([vlog - vlog/set and vlog/list - Python3])
+on_exit 'kill `cat test-unixctl.py.pid`'
 
-   AT_CAPTURE_FILE([log])
-   AT_CHECK([$3 $srcdir/test-unixctl.py --log-file=`pwd`/log --pidfile --detach --no-chdir])
+AT_CAPTURE_FILE([log])
+AT_CHECK([$PYTHON3 $srcdir/test-unixctl.py --log-file=`pwd`/log --pidfile --detach --no-chdir])
 
-   AT_CHECK([APPCTL -t test-unixctl.py vlog/list], [0], [dnl
+AT_CHECK([APPCTL -t test-unixctl.py vlog/list], [0], [dnl
                  console    syslog    file
                  -------    ------    ------
 daemon            info       info       info
@@ -441,19 +414,16 @@ test-unixctl      info       info        dbg
 unixctl_server    info       info        dbg
 ])
 
-   AT_CHECK([APPCTL -t test-unixctl.py vlog/set pattern], [0],
+AT_CHECK([APPCTL -t test-unixctl.py vlog/set pattern], [0],
   [Please supply a valid pattern and destination
 ])
-   AT_CHECK([APPCTL -t test-unixctl.py vlog/set pattern:nonexistent], [0],
+AT_CHECK([APPCTL -t test-unixctl.py vlog/set pattern:nonexistent], [0],
   [Destination nonexistent does not exist
 ])
-   AT_CHECK([APPCTL -t test-unixctl.py vlog/set pattern:file:'I<3OVS|%m'])
-   AT_CHECK([APPCTL -t test-unixctl.py log patterntest])
-   AT_CHECK([grep -q 'I<3OVS' log])
-   AT_CLEANUP])
-
-VLOG_SET_AND_LIST_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-VLOG_SET_AND_LIST_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
+AT_CHECK([APPCTL -t test-unixctl.py vlog/set pattern:file:'I<3OVS|%m'])
+AT_CHECK([APPCTL -t test-unixctl.py log patterntest])
+AT_CHECK([grep -q 'I<3OVS' log])
+AT_CLEANUP
 
 AT_SETUP([vlog - RFC5424 facility])
 on_exit 'kill `cat ovsdb-server.pid`'
@@ -492,24 +462,19 @@ AT_CHECK([tail -1 ovsdb-server.log | awk '{print $1}'], [0], [<191>1
 ])
 AT_CLEANUP
 
-m4_define([VLOG_RFC5424_PYN],
-  [AT_SETUP([vlog - RFC5424 facility - $1])
-   AT_SKIP_IF([test $2 = no])
-   on_exit 'kill `cat test-unixctl.py.pid`'
+AT_SETUP([vlog - RFC5424 facility - Python3])
+on_exit 'kill `cat test-unixctl.py.pid`'
 
-   AT_CHECK([$3 $srcdir/test-unixctl.py --log-file=`pwd`/log --pidfile \
+AT_CHECK([$PYTHON3 $srcdir/test-unixctl.py --log-file=`pwd`/log --pidfile \
 -vFACILITY:invalid --detach --no-chdir], [1], [], [test-unixctl.py: processing "FACILITY:invalid": Facility invalid is invalid
 ])
 
-   AT_CHECK([$3 $srcdir/test-unixctl.py --log-file=`pwd`/log --pidfile \
+AT_CHECK([$PYTHON3 $srcdir/test-unixctl.py --log-file=`pwd`/log --pidfile \
 -vFACILITY:daemon --detach --no-chdir])
 
-   AT_CHECK([ovs-appctl -t test-unixctl.py vlog/set FACILITY:invalid], [0],
+AT_CHECK([ovs-appctl -t test-unixctl.py vlog/set FACILITY:invalid], [0],
 [Facility invalid is invalid
 ])
 
-   AT_CHECK([ovs-appctl -t test-unixctl.py vlog/set FACILITY:local0])
-   AT_CLEANUP])
-
-VLOG_RFC5424_PYN([Python2], [$HAVE_PYTHON2], [$PYTHON2])
-VLOG_RFC5424_PYN([Python3], [$HAVE_PYTHON3], [$PYTHON3])
+AT_CHECK([ovs-appctl -t test-unixctl.py vlog/set FACILITY:local0])
+AT_CLEANUP
diff --git a/utilities/automake.mk b/utilities/automake.mk
index 58f743e04fef..0660c078d259 100644
--- a/utilities/automake.mk
+++ b/utilities/automake.mk
@@ -8,15 +8,12 @@ bin_SCRIPTS += utilities/ovs-docker \
 	utilities/ovs-pki \
 	utilities/ovs-pcap \
 	utilities/ovs-tcpdump \
-	utilities/ovs-tcpundump
-if HAVE_PYTHON2
-bin_SCRIPTS += \
+	utilities/ovs-tcpundump \
 	utilities/ovs-dpctl-top \
 	utilities/ovs-l3ping \
 	utilities/ovs-parse-backtrace \
 	utilities/ovs-test \
 	utilities/ovs-vlan-test
-endif
 scripts_SCRIPTS += \
 	utilities/ovs-check-dead-ifs \
 	utilities/ovs-ctl \
diff --git a/utilities/bugtool/automake.mk b/utilities/bugtool/automake.mk
index 40980b367095..4c85b9cba975 100644
--- a/utilities/bugtool/automake.mk
+++ b/utilities/bugtool/automake.mk
@@ -1,4 +1,3 @@
-if HAVE_PYTHON2
 sbin_SCRIPTS += utilities/bugtool/ovs-bugtool
 CLEANFILES += utilities/bugtool/ovs-bugtool
 
@@ -51,7 +50,6 @@ bugtool-uninstall-local:
 	    rm -rf "$(DESTDIR)$(bugtoolpluginsdir)/$$dir"; \
 	  fi \
 	done; exit 0
-endif
 
 EXTRA_DIST += \
 	$(bugtool_plugins) \
diff --git a/utilities/bugtool/ovs-bugtool.in b/utilities/bugtool/ovs-bugtool.in
index f3657dc96501..0f3189426a19 100755
--- a/utilities/bugtool/ovs-bugtool.in
+++ b/utilities/bugtool/ovs-bugtool.in
@@ -1,4 +1,4 @@
-#! @PYTHON@
+#! @PYTHON3@
 
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of version 2.1 of the GNU Lesser General Public
diff --git a/utilities/checkpatch.py b/utilities/checkpatch.py
index a9f27b52f3c8..9b79d268f455 100755
--- a/utilities/checkpatch.py
+++ b/utilities/checkpatch.py
@@ -1,4 +1,4 @@
-#!/usr/bin/env python
+#!/usr/bin/env python3
 # Copyright (c) 2016, 2017 Red Hat, Inc.
 # Copyright (c) 2018 Nicira, Inc.
 #
diff --git a/utilities/ovs-check-dead-ifs.in b/utilities/ovs-check-dead-ifs.in
index 73e4fd9e102d..bf3565758a6b 100755
--- a/utilities/ovs-check-dead-ifs.in
+++ b/utilities/ovs-check-dead-ifs.in
@@ -1,4 +1,4 @@
-#! @PYTHON@
+#! @PYTHON3@
 
 import os
 import re
diff --git a/utilities/ovs-dpctl-top.in b/utilities/ovs-dpctl-top.in
index d8889b932840..f2cc3f7f2a6f 100755
--- a/utilities/ovs-dpctl-top.in
+++ b/utilities/ovs-dpctl-top.in
@@ -1,4 +1,4 @@
-#! @PYTHON@
+#! @PYTHON3@
 #
 # Copyright (c) 2013 Nicira, Inc.
 #
diff --git a/utilities/ovs-l3ping.in b/utilities/ovs-l3ping.in
index 1b0797295409..92d32acb3fa3 100644
--- a/utilities/ovs-l3ping.in
+++ b/utilities/ovs-l3ping.in
@@ -1,4 +1,4 @@
-#! @PYTHON@
+#! @PYTHON3@
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
diff --git a/utilities/ovs-parse-backtrace.in b/utilities/ovs-parse-backtrace.in
index 350cbd9f8774..d5506769a80d 100755
--- a/utilities/ovs-parse-backtrace.in
+++ b/utilities/ovs-parse-backtrace.in
@@ -1,4 +1,4 @@
-#! @PYTHON@
+#! @PYTHON3@
 #
 # Copyright (c) 2012 Nicira, Inc.
 #
diff --git a/utilities/ovs-pcap.in b/utilities/ovs-pcap.in
index 7bebc079543d..dddbee4dfb16 100755
--- a/utilities/ovs-pcap.in
+++ b/utilities/ovs-pcap.in
@@ -1,4 +1,4 @@
-#! @PYTHON@
+#! @PYTHON3@
 #
 # Copyright (c) 2010 Nicira, Inc.
 #
diff --git a/utilities/ovs-tcpdump.in b/utilities/ovs-tcpdump.in
index 11624c54bd2b..0fa5dc418c7e 100755
--- a/utilities/ovs-tcpdump.in
+++ b/utilities/ovs-tcpdump.in
@@ -1,4 +1,4 @@
-#! @PYTHON@
+#! @PYTHON3@
 #
 # Copyright (c) 2016 Red Hat, Inc.
 #
diff --git a/utilities/ovs-tcpundump.in b/utilities/ovs-tcpundump.in
index c2987006244c..b20730ec96be 100755
--- a/utilities/ovs-tcpundump.in
+++ b/utilities/ovs-tcpundump.in
@@ -1,4 +1,4 @@
-#! @PYTHON@
+#! @PYTHON3@
 #
 # Copyright (c) 2010 Nicira, Inc.
 #
diff --git a/utilities/ovs-test.in b/utilities/ovs-test.in
index fb1f9ad2abb8..eb712ffe8bca 100644
--- a/utilities/ovs-test.in
+++ b/utilities/ovs-test.in
@@ -1,4 +1,4 @@
-#! @PYTHON@
+#! @PYTHON3@
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
diff --git a/utilities/ovs-vlan-test.in b/utilities/ovs-vlan-test.in
index e2294989fd64..154573a9b5ed 100755
--- a/utilities/ovs-vlan-test.in
+++ b/utilities/ovs-vlan-test.in
@@ -1,4 +1,4 @@
-#! @PYTHON@
+#! @PYTHON3@
 #
 # Copyright (c) 2010 Nicira, Inc.
 #
diff --git a/vswitchd/automake.mk b/vswitchd/automake.mk
index abdbcc698ba7..595d1e46a9c0 100644
--- a/vswitchd/automake.mk
+++ b/vswitchd/automake.mk
@@ -26,18 +26,16 @@ pkgdata_DATA += vswitchd/vswitch.ovsschema
 #
 # If "python" or "dot" is not available, then we do not add graphical diagram
 # to the documentation.
-if HAVE_PYTHON
 if HAVE_DOT
 vswitchd/vswitch.gv: ovsdb/ovsdb-dot.in vswitchd/vswitch.ovsschema
 	$(AM_V_GEN)$(OVSDB_DOT) --no-arrows $(srcdir)/vswitchd/vswitch.ovsschema > $@
 vswitchd/vswitch.pic: vswitchd/vswitch.gv ovsdb/dot2pic
-	$(AM_V_GEN)(dot -T plain < vswitchd/vswitch.gv | $(PYTHON) $(srcdir)/ovsdb/dot2pic -f 3) > $@.tmp && \
+	$(AM_V_GEN)(dot -T plain < vswitchd/vswitch.gv | $(PYTHON3) $(srcdir)/ovsdb/dot2pic -f 3) > $@.tmp && \
 	mv $@.tmp $@
 VSWITCH_PIC = vswitchd/vswitch.pic
 VSWITCH_DOT_DIAGRAM_ARG = --er-diagram=$(VSWITCH_PIC)
 CLEANFILES += vswitchd/vswitch.gv vswitchd/vswitch.pic
 endif
-endif
 
 # vswitch schema documentation
 EXTRA_DIST += vswitchd/vswitch.xml
diff --git a/vtep/automake.mk b/vtep/automake.mk
index 0f313dce3efc..e549922d915f 100644
--- a/vtep/automake.mk
+++ b/vtep/automake.mk
@@ -53,18 +53,16 @@ pkgdata_DATA += vtep/vtep.ovsschema
 #
 # If "python" or "dot" is not available, then we do not add graphical diagram
 # to the documentation.
-if HAVE_PYTHON
 if HAVE_DOT
 vtep/vtep.gv: ovsdb/ovsdb-dot.in vtep/vtep.ovsschema
 	$(AM_V_GEN)$(OVSDB_DOT) --no-arrows $(srcdir)/vtep/vtep.ovsschema > $@
 vtep/vtep.pic: vtep/vtep.gv ovsdb/dot2pic
-	$(AM_V_GEN)(dot -T plain < vtep/vtep.gv | $(PYTHON) $(srcdir)/ovsdb/dot2pic -f 3) > $@.tmp && \
+	$(AM_V_GEN)(dot -T plain < vtep/vtep.gv | $(PYTHON3) $(srcdir)/ovsdb/dot2pic -f 3) > $@.tmp && \
 	mv $@.tmp $@
 VTEP_PIC = vtep/vtep.pic
 VTEP_DOT_DIAGRAM_ARG = --er-diagram=$(VTEP_PIC)
 CLEANFILES += vtep/vtep.gv vtep/vtep.pic
 endif
-endif
 
 # VTEP schema documentation
 EXTRA_DIST += vtep/vtep.xml
diff --git a/vtep/ovs-vtep.in b/vtep/ovs-vtep.in
index 338387075082..de848d1a0167 100755
--- a/vtep/ovs-vtep.in
+++ b/vtep/ovs-vtep.in
@@ -1,4 +1,4 @@
-#! @PYTHON@
+#! @PYTHON3@
 # Copyright (C) 2013 Nicira, Inc. All Rights Reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
