[08/11] PCI: v3-semi: Use inbound resources for setup

Now that the helpers provide the inbound resources in the host bridge
'dma_ranges' resource list, convert the v3-semi host bridge to use
the resource list to setup the inbound addresses.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rob Herring <robh@kernel.org>
---
 drivers/pci/controller/pci-v3-semi.c | 38 ++++++++++++----------------
 1 file changed, 16 insertions(+), 22 deletions(-)

On Tue, Sep 24, 2019 at 04:46:27PM -0500, Rob Herring wrote:
> Now that the helpers provide the inbound resources in the host bridge
> 'dma_ranges' resource list, convert the v3-semi host bridge to use
> the resource list to setup the inbound addresses.
> 
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Signed-off-by: Rob Herring <robh@kernel.org>

Reviewed-by: Andrew Murray <andrew.murray@arm.com>

> ---
>  drivers/pci/controller/pci-v3-semi.c | 38 ++++++++++++----------------
>  1 file changed, 16 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/pci/controller/pci-v3-semi.c b/drivers/pci/controller/pci-v3-semi.c
> index 090df766faf9..122b695da591 100644
> --- a/drivers/pci/controller/pci-v3-semi.c
> +++ b/drivers/pci/controller/pci-v3-semi.c
> @@ -613,28 +613,30 @@ static int v3_pci_setup_resource(struct v3_pci *v3,
>  }
>  
>  static int v3_get_dma_range_config(struct v3_pci *v3,
> -				   struct of_pci_range *range,
> +				   struct resource_entry *entry,
>  				   u32 *pci_base, u32 *pci_map)
>  {
>  	struct device *dev = v3->dev;
> -	u64 cpu_end = range->cpu_addr + range->size - 1;
> -	u64 pci_end = range->pci_addr + range->size - 1;
> +	u64 cpu_addr = entry->res->start;
> +	u64 cpu_end = entry->res->end;
> +	u64 pci_end = cpu_end - entry->offset;
> +	u64 pci_addr = entry->res->start - entry->offset;
>  	u32 val;
>  
> -	if (range->pci_addr & ~V3_PCI_BASE_M_ADR_BASE) {
> +	if (pci_addr & ~V3_PCI_BASE_M_ADR_BASE) {
>  		dev_err(dev, "illegal range, only PCI bits 31..20 allowed\n");
>  		return -EINVAL;
>  	}
> -	val = ((u32)range->pci_addr) & V3_PCI_BASE_M_ADR_BASE;
> +	val = ((u32)pci_addr) & V3_PCI_BASE_M_ADR_BASE;
>  	*pci_base = val;
>  
> -	if (range->cpu_addr & ~V3_PCI_MAP_M_MAP_ADR) {
> +	if (cpu_addr & ~V3_PCI_MAP_M_MAP_ADR) {
>  		dev_err(dev, "illegal range, only CPU bits 31..20 allowed\n");
>  		return -EINVAL;
>  	}
> -	val = ((u32)range->cpu_addr) & V3_PCI_MAP_M_MAP_ADR;
> +	val = ((u32)cpu_addr) & V3_PCI_MAP_M_MAP_ADR;
>  
> -	switch (range->size) {
> +	switch (resource_size(entry->res)) {
>  	case SZ_1M:
>  		val |= V3_LB_BASE_ADR_SIZE_1MB;
>  		break;
> @@ -682,8 +684,8 @@ static int v3_get_dma_range_config(struct v3_pci *v3,
>  	dev_dbg(dev,
>  		"DMA MEM CPU: 0x%016llx -> 0x%016llx => "
>  		"PCI: 0x%016llx -> 0x%016llx base %08x map %08x\n",
> -		range->cpu_addr, cpu_end,
> -		range->pci_addr, pci_end,
> +		cpu_addr, cpu_end,
> +		pci_addr, pci_end,
>  		*pci_base, *pci_map);
>  
>  	return 0;
> @@ -692,24 +694,16 @@ static int v3_get_dma_range_config(struct v3_pci *v3,
>  static int v3_pci_parse_map_dma_ranges(struct v3_pci *v3,
>  				       struct device_node *np)
>  {
> -	struct of_pci_range range;
> -	struct of_pci_range_parser parser;
> +	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(v3);
>  	struct device *dev = v3->dev;
> +	struct resource_entry *entry;
>  	int i = 0;
>  
> -	if (of_pci_dma_range_parser_init(&parser, np)) {
> -		dev_err(dev, "missing dma-ranges property\n");
> -		return -EINVAL;
> -	}
> -
> -	/*
> -	 * Get the dma-ranges from the device tree
> -	 */
> -	for_each_of_pci_range(&parser, &range) {
> +	resource_list_for_each_entry(entry, &bridge->dma_ranges) {
>  		int ret;
>  		u32 pci_base, pci_map;
>  
> -		ret = v3_get_dma_range_config(v3, &range, &pci_base, &pci_map);
> +		ret = v3_get_dma_range_config(v3, entry, &pci_base, &pci_map);
>  		if (ret)
>  			return ret;
>  
> -- 
> 2.20.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

On Tue, Sep 24, 2019 at 11:46 PM Rob Herring <robh@kernel.org> wrote:

> Now that the helpers provide the inbound resources in the host bridge
> 'dma_ranges' resource list, convert the v3-semi host bridge to use
> the resource list to setup the inbound addresses.
>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Signed-off-by: Rob Herring <robh@kernel.org>

Looks correct!
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij