@@ -96,8 +96,15 @@ Building
OVN RPMs
~~~~~~~~~~~~~~~
-To build OVN RPMs, execute the following from the directory
-in which `./configure` was executed:
+To build OVN RPMs, first generate openvswitch source tarball in
+your openvwitch source directory by running
+
+::
+
+ $make dist
+
+And then execute the following in the OVN source directory
+(in which `./configure` was executed):
::
@@ -108,7 +115,7 @@ This will create the RPMs `ovn`, `ovn-central`, `ovn-host`, `ovn-vtep`,
``ovn-host-debuginfo`` and ```ovn-vtep-debuginfo```.
-You can also have the above commands automatically run the Open vSwitch unit
+You can also have the above commands automatically run the OVN unit
tests. This can take several minutes.
::
@@ -291,6 +291,8 @@ Example usage::
$./boot.sh
$./configure --with-ovs-source=/home/foo/ovs/ --with-ovs-build=/home/foo/ovs/_gcc
+It is expected to configure both Open vSwitch and OVN with the same prefix.
+
.. _general-building:
Building
@@ -8,6 +8,7 @@
EXTRA_DIST += \
rhel/README.RHEL.rst \
rhel/automake.mk \
+ rhel/etc_logrotate.d_ovn \
rhel/ovn-fedora.spec \
rhel/ovn-fedora.spec.in \
rhel/usr_lib_systemd_system_ovn-controller.service \
@@ -27,6 +28,7 @@ RPMBUILD_OPT ?= --without check
rpm-fedora: dist $(srcdir)/rhel/ovn-fedora.spec
${MKDIR_P} ${RPMBUILD_TOP}/SOURCES
cp ${DIST_ARCHIVES} ${RPMBUILD_TOP}/SOURCES
+ cp $(ovs_builddir)/openvswitch-$(VERSION).tar.gz ${RPMBUILD_TOP}/SOURCES
rpmbuild ${RPMBUILD_OPT} \
-D "_topdir ${RPMBUILD_TOP}" \
-ba $(srcdir)/rhel/ovn-fedora.spec
new file mode 100644
@@ -0,0 +1,22 @@
+# Copyright (C) 2019 Red Hat, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved. This file is offered as-is,
+# without warranty of any kind.
+
+/var/log/ovn/*.log {
+ su root root
+ daily
+ compress
+ sharedscripts
+ missingok
+ postrotate
+ # Tell OVN daemons to reopen their log files
+ if [ -d /var/run/ovn ]; then
+ for ctl in /var/run/ovn/*.ctl; do
+ ovs-appctl -t "$ctl" vlog/reopen 2>/dev/null || :
+ done
+ fi
+ endscript
+}
@@ -1,6 +1,6 @@
# Spec file for Open Virtual Network (OVN).
-# Copyright (C) 2018 Red Hat, Inc.
+# Copyright (C) 2018,2019 Red Hat, Inc.
#
# Copying and distribution of this file, with or without modification,
# are permitted in any medium without royalty provided the copyright
@@ -48,11 +48,15 @@ Version: @VERSION@
Obsoletes: openvswitch-ovn-common < %{?epoch:%{epoch}:}%{version}-%{release}
Provides: openvswitch-ovn-common = %{?epoch:%{epoch}:}%{version}-%{release}
+%define ovsver %{version}
+%define ovsdir openvswitch-%{ovsver}
+
# Nearly all of openvswitch is ASL 2.0. The bugtool is LGPLv2+, and the
# lib/sflow*.[ch] files are SISSL
License: ASL 2.0 and LGPLv2+ and SISSL
Release: 1%{?dist}
-Source: http://openvswitch.org/releases/openvswitch-%{version}.tar.gz
+Source: http://openvswitch.org/releases/ovn-%{version}.tar.gz
+Source10: http://openvswitch.org/releases/openvswitch-%{ovsver}.tar.gz
BuildRequires: gcc gcc-c++
BuildRequires: autoconf automake libtool
@@ -131,10 +135,37 @@ Provides: openvswitch-ovn-docker = %{?epoch:%{epoch}:}%{version}-%{release}
Docker network plugins for OVN.
%prep
-%setup -n openvswitch-%{version}
+%autosetup -n ovn-%{version} -a 10 -p 1
+
%build
+./boot.sh
+
+# Build openvswitch first
+cd openvswitch-%{ovsver}
+./boot.sh
%configure \
+ --with-ovs-source=ovs \
+%if %{with libcapng}
+ --enable-libcapng \
+%else
+ --disable-libcapng \
+%endif
+ --enable-ssl \
+ --with-pkidir=%{_sharedstatedir}/openvswitch/pki \
+%if 0%{?fedora} > 22 || %{with build_python3}
+ PYTHON3=%{__python3} \
+ PYTHON=%{__python2}
+%else
+ PYTHON=%{__python}
+%endif
+
+make %{?_smp_mflags}
+cd -
+
+# Build OVN.
+%configure \
+ --with-ovs-source=$PWD/openvswitch-%{ovsver} \
%if %{with libcapng}
--enable-libcapng \
%else
@@ -163,7 +194,7 @@ done
rm -rf $RPM_BUILD_ROOT/%{_datadir}/openvswitch/python/
-install -d -m 0755 $RPM_BUILD_ROOT/%{_sharedstatedir}/openvswitch
+install -d -m 0755 $RPM_BUILD_ROOT/%{_sharedstatedir}/ovn
install -d $RPM_BUILD_ROOT%{_prefix}/lib/firewalld/services/
install -p -m 0644 rhel/usr_lib_firewalld_services_ovn-central-firewall-service.xml \
@@ -172,9 +203,12 @@ install -p -m 0644 rhel/usr_lib_firewalld_services_ovn-host-firewall-service.xml
$RPM_BUILD_ROOT%{_prefix}/lib/firewalld/services/ovn-host-firewall-service.xml
install -d -m 0755 $RPM_BUILD_ROOT%{_prefix}/lib/ocf/resource.d/ovn
-ln -s %{_datadir}/openvswitch/scripts/ovndb-servers.ocf \
+ln -s %{_datadir}/ovn/scripts/ovndb-servers.ocf \
$RPM_BUILD_ROOT%{_prefix}/lib/ocf/resource.d/ovn/ovndb-servers
+install -p -D -m 0644 rhel/etc_logrotate.d_ovn \
+ $RPM_BUILD_ROOT/%{_sysconfdir}/logrotate.d/ovn
+
# remove OVS unpackages files
rm -f $RPM_BUILD_ROOT%{_bindir}/ovs*
rm -f $RPM_BUILD_ROOT%{_bindir}/vtep-ctl
@@ -185,18 +219,12 @@ rm -f $RPM_BUILD_ROOT%{_mandir}/man5/vtep*
rm -f $RPM_BUILD_ROOT%{_mandir}/man7/ovs*
rm -f $RPM_BUILD_ROOT%{_mandir}/man8/ovs*
rm -f $RPM_BUILD_ROOT%{_mandir}/man8/vtep*
-rm -f $RPM_BUILD_ROOT%{_datadir}/openvswitch/ovs*
-rm -f $RPM_BUILD_ROOT%{_datadir}/openvswitch/vswitch.ovsschema
-rm -f $RPM_BUILD_ROOT%{_datadir}/openvswitch/vtep.ovsschema
-rm -f $RPM_BUILD_ROOT%{_datadir}/openvswitch/scripts/ovs*
-rm -rf $RPM_BUILD_ROOT%{_datadir}/openvswitch/bugtool-plugins
-rm -f $RPM_BUILD_ROOT%{_includedir}/openvswitch/*
-rm -f $RPM_BUILD_ROOT%{_includedir}/openflow/*
+rm -rf $RPM_BUILD_ROOT%{_datadir}/ovn/python
+rm -f $RPM_BUILD_ROOT%{_datadir}/ovn/scripts/ovs*
+rm -rf $RPM_BUILD_ROOT%{_datadir}/ovn/bugtool-plugins
rm -f $RPM_BUILD_ROOT%{_libdir}/*.a
rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
rm -f $RPM_BUILD_ROOT%{_libdir}/pkgconfig/*.pc
-rm -f $RPM_BUILD_ROOT%{_includedir}/openvswitch/*
-rm -f $RPM_BUILD_ROOT%{_includedir}/openflow/*
rm -f $RPM_BUILD_ROOT%{_includedir}/ovn/*
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/bash_completion.d/ovs-appctl-bashcomp.bash
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/bash_completion.d/ovs-vsctl-bashcomp.bash
@@ -389,20 +417,22 @@ fi
%{_bindir}/ovn-sbctl
%{_bindir}/ovn-trace
%{_bindir}/ovn-detrace
-%{_datadir}/openvswitch/scripts/ovn-ctl
-%{_datadir}/openvswitch/scripts/ovndb-servers.ocf
-%{_datadir}/openvswitch/scripts/ovn-bugtool-nbctl-show
-%{_datadir}/openvswitch/scripts/ovn-bugtool-sbctl-lflow-list
-%{_datadir}/openvswitch/scripts/ovn-bugtool-sbctl-show
+%{_datadir}/ovn/scripts/ovn-ctl
+%{_datadir}/ovn/scripts/ovn-lib
+%{_datadir}/ovn/scripts/ovndb-servers.ocf
+%{_datadir}/ovn/scripts/ovn-bugtool-nbctl-show
+%{_datadir}/ovn/scripts/ovn-bugtool-sbctl-lflow-list
+%{_datadir}/ovn/scripts/ovn-bugtool-sbctl-show
%{_mandir}/man8/ovn-ctl.8*
%{_mandir}/man8/ovn-nbctl.8*
%{_mandir}/man8/ovn-trace.8*
%{_mandir}/man1/ovn-detrace.1*
-%{_mandir}/man7/ovn-architecture.7*
+#%{_mandir}/man7/ovn-architecture.7* - Uncomment this once the manpage is fixed
%{_mandir}/man8/ovn-sbctl.8*
-%{_mandir}/man5/ovn-nb.5*
-%{_mandir}/man5/ovn-sb.5*
+#%{_mandir}/man5/ovn-nb.5* - Uncomment this once the manpage is fixed
+#%{_mandir}/man5/ovn-sb.5* - Uncomment this once the manpage is fixed
%{_prefix}/lib/ocf/resource.d/ovn/ovndb-servers
+%config(noreplace) %{_sysconfdir}/logrotate.d/ovn
%files docker
%{_bindir}/ovn-docker-overlay-driver
@@ -411,8 +441,8 @@ fi
%files central
%{_bindir}/ovn-northd
%{_mandir}/man8/ovn-northd.8*
-%config %{_datadir}/openvswitch/ovn-nb.ovsschema
-%config %{_datadir}/openvswitch/ovn-sb.ovsschema
+%config %{_datadir}/ovn/ovn-nb.ovsschema
+%config %{_datadir}/ovn/ovn-sb.ovsschema
%{_unitdir}/ovn-northd.service
%{_prefix}/lib/firewalld/services/ovn-central-firewall-service.xml
@@ -19,12 +19,12 @@
# /etc/systemd/system/ovn-controller-vtep.d/local.conf:
#
# [System]
-# Environment="OVN_DB=unix:/usr/local/var/run/openvswitch/db.sock" "VTEP_DB=unix:/usr/local/var/run/openvswitch/vtep.sock"
+# Environment="OVN_DB=unix:/usr/local/var/run/ovn/db.sock" "VTEP_DB=unix:/usr/local/var/run/ovn/vtep.sock"
#
# Alternatively, you may specify environment variables in the file /etc/sysconfig/ovn-controller-vtep:
#
-# OVN_DB="unix:/usr/local/var/run/openvswitch/db.sock"
-# VTEP_DB="unix:/usr/local/var/run/openvswitch/vtep.sock"
+# OVN_DB="unix:/usr/local/var/run/ovn/db.sock"
+# VTEP_DB="unix:/usr/local/var/run/ovn/vtep.sock"
[Unit]
Description=OVN VTEP gateway controller daemon
@@ -36,12 +36,13 @@ After=openvswitch.service
Type=simple
Restart=on-failure
Environment=OVS_RUNDIR=%t/openvswitch
-Environment=OVN_DB=unix:%t/openvswitch/db.sock
+Environment=OVN_RUNDIR=%t/ovn
+Environment=OVN_DB=unix:%t/ovn/ovnsb_db.sock
Environment=VTEP_DB=unix:%t/openvswitch/db.sock
EnvironmentFile=-/etc/sysconfig/ovn-controller-vtep
ExecStart=/usr/bin/ovn-controller-vtep -vconsole:emer -vsyslog:err -vfile:info \
- --log-file=/var/log/openvswitch/ovn-controller-vtep.log \
- --no-chdir --pidfile=${OVS_RUNDIR}/ovn-controller-vtep.pid \
+ --log-file=/var/log/ovn/ovn-controller-vtep.log \
+ --no-chdir --pidfile=${OVN_RUNDIR}/ovn-controller-vtep.pid \
--ovnsb-db=${OVN_DB} --vtep-db=${VTEP_DB}
[Install]
@@ -21,12 +21,13 @@ After=openvswitch.service
[Service]
Type=forking
-PIDFile=/var/run/openvswitch/ovn-controller.pid
+PIDFile=/var/run/ovn/ovn-controller.pid
Restart=on-failure
+Environment=OVN_RUNDIR=%t/ovn OVS_RUNDIR=%t/openvswitch
EnvironmentFile=-/etc/sysconfig/ovn-controller
-ExecStart=/usr/share/openvswitch/scripts/ovn-ctl --no-monitor \
+ExecStart=/usr/share/ovn/scripts/ovn-ctl --no-monitor \
start_controller $OVN_CONTROLLER_OPTS
-ExecStop=/usr/share/openvswitch/scripts/ovn-ctl stop_controller
+ExecStop=/usr/share/ovn/scripts/ovn-ctl stop_controller
[Install]
WantedBy=multi-user.target
@@ -7,25 +7,23 @@
# /etc/systemd/system/ovn-northd.d/local.conf:
#
# [System]
-# Environment="OVN_NORTHD_OPTS=--db-nb-sock=/usr/local/var/run/openvswitch/ovnnb_db.sock --db-sb-sock=/usr/local/var/run/openvswitch/ovnsb_db.sock"
+# Environment="OVN_NORTHD_OPTS=--db-nb-sock=/usr/local/var/run/ovn/ovnnb_db.sock --db-sb-sock=/usr/local/var/run/ovn/ovnsb_db.sock"
#
# Alternatively, you may specify environment variables in the file /etc/sysconfig/ovn-northd:
#
-# OVN_NORTHD_OPTS="--db-nb-sock=/usr/local/var/run/openvswitch/ovnnb_db.sock --db-sb-sock=/usr/local/var/run/openvswitch/ovnsb_db.sock"
+# OVN_NORTHD_OPTS="--db-nb-sock=/usr/local/var/run/ovn/ovnnb_db.sock --db-sb-sock=/usr/local/var/run/ovn/ovnsb_db.sock"
[Unit]
Description=OVN northd management daemon
After=syslog.target
-Requires=openvswitch.service
-After=openvswitch.service
[Service]
Type=oneshot
RemainAfterExit=yes
-Environment=OVS_RUNDIR=%t/openvswitch OVS_DBDIR=/var/lib/openvswitch
+Environment=OVN_RUNDIR=%t/ovn OVN_DBDIR=/var/lib/ovn
EnvironmentFile=-/etc/sysconfig/ovn-northd
-ExecStart=/usr/share/openvswitch/scripts/ovn-ctl start_northd $OVN_NORTHD_OPTS
-ExecStop=/usr/share/openvswitch/scripts/ovn-ctl stop_northd
+ExecStart=/usr/share/ovn/scripts/ovn-ctl start_northd $OVN_NORTHD_OPTS
+ExecStop=/usr/share/ovn/scripts/ovn-ctl stop_northd
[Install]
WantedBy=multi-user.target
@@ -188,7 +188,7 @@ $cluster_remote_port
set "$@" --remote=punix:$sock --pidfile=$db_pid_file
set "$@" --unixctl=$ctrl_sock
- [ "$OVS_USER" != "" ] && set "$@" --user "$OVS_USER"
+ [ "$OVN_USER" != "" ] && set "$@" --user "$OVN_USER"
if test X"$detach" != Xno; then
set "$@" --detach --monitor
@@ -487,7 +487,6 @@ set_defaults () {
OVN_CONTROLLER_WRAPPER=
OVN_USER=
- OVS_USER=
OVN_CONTROLLER_LOG="-vconsole:emer -vsyslog:err -vfile:info"
OVN_NORTHD_LOG="-vconsole:emer -vsyslog:err -vfile:info"