@@ -104,6 +104,97 @@ int acpi_get_rc_resources(struct device *dev, const char *hid, u16 segment,
}
#endif
+#if defined(CONFIG_PCIE_DPC) && defined(CONFIG_ACPI)
+
+/*
+ * _DSM wrapper function to enable/disable DPC port.
+ * @dpc : DPC device structure
+ * @enable: status of DPC port (0 or 1).
+ *
+ * returns 0 on success or errno on failure.
+ */
+int acpi_enable_dpc_port(struct pci_dev *pdev, acpi_handle handle, bool enable)
+{
+ union acpi_object *obj;
+ int status = 0;
+ union acpi_object argv4;
+
+ argv4.type = ACPI_TYPE_INTEGER;
+ argv4.integer.value = enable;
+
+ obj = acpi_evaluate_dsm(handle, &pci_acpi_dsm_guid, 1,
+ EDR_PORT_ENABLE_DSM, &argv4);
+ if (!obj)
+ return -EIO;
+
+ if (obj->type != ACPI_TYPE_INTEGER || obj->integer.value != enable)
+ status = -EIO;
+
+ ACPI_FREE(obj);
+
+ return status;
+}
+
+/*
+ * _DSM wrapper function to locate DPC port.
+ * @dpc : DPC device structure
+ *
+ * returns pci_dev or NULL.
+ */
+struct pci_dev *acpi_locate_dpc_port(struct pci_dev *pdev, acpi_handle handle)
+{
+ union acpi_object *obj;
+ u16 port;
+
+ obj = acpi_evaluate_dsm(handle, &pci_acpi_dsm_guid, 1,
+ EDR_PORT_LOCATE_DSM, NULL);
+ if (!obj)
+ return pci_dev_get(pdev);
+
+ if (obj->type != ACPI_TYPE_INTEGER) {
+ ACPI_FREE(obj);
+ return NULL;
+ }
+
+ /*
+ * Firmware returns DPC port BDF details in following format:
+ * 15:8 = bus
+ * 7:3 = device
+ * 2:0 = function
+ */
+ port = obj->integer.value;
+
+ ACPI_FREE(obj);
+
+ return pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus),
+ PCI_BUS_NUM(port), port & 0xff);
+}
+
+/*
+ * _OST wrapper function to let firmware know the status of EDR event.
+ * @dpc : DPC device structure.
+ * @status: Status of EDR event.
+ */
+int acpi_send_edr_status(struct pci_dev *pdev, acpi_handle handle, u16 status)
+{
+ u32 ost_status;
+
+ pci_dbg(pdev, "Sending EDR status :%x\n", status);
+
+ ost_status = PCI_DEVID(pdev->bus->number, pdev->devfn);
+ ost_status = (ost_status << 16) | status;
+
+ status = acpi_evaluate_ost(handle,
+ ACPI_NOTIFY_DISCONNECT_RECOVER,
+ ost_status, NULL);
+ if (ACPI_FAILURE(status))
+ return -EINVAL;
+
+ return 0;
+}
+
+#endif /* CONFIG_PCIE_DPC && CONFIG_ACPI */
+
phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle)
{
acpi_status status = AE_NOT_EXIST;
@@ -150,3 +150,13 @@ config PCIE_BW
This enables PCI Express Bandwidth Change Notification. If
you know link width or rate changes occur only to correct
unreliable links, you may answer Y.
+
+config PCIE_EDR
+ bool "PCI Express Error Disconnect Recover support"
+ default n
+ depends on PCIE_DPC && ACPI
+ help
+ This options adds Error Disconnect Recover support as specified
+ in PCI firmware specification v3.2 Downstream Port Containment
+ Related Enhancements ECN. Enable this if you want to support hybrid
+ DPC model which uses both firmware and OS to implement DPC.
@@ -13,6 +13,8 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/acpi.h>
+#include <linux/pci-acpi.h>
#include "portdrv.h"
#include "../pci.h"
@@ -24,6 +26,11 @@ struct dpc_dev {
u8 rp_log_size;
/* Set True if DPC is controlled by firmware */
bool firmware_dpc;
+ pci_ers_result_t error_state;
+ struct mutex edr_lock;
+#ifdef CONFIG_ACPI
+ struct acpi_device *adev;
+#endif
};
static const char * const rp_pio_error_string[] = {
@@ -152,6 +159,9 @@ static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
if (!pcie_wait_for_link(pdev, true))
return PCI_ERS_RESULT_DISCONNECT;
+ /* Since the device recovery is done just update the error state */
+ dpc->error_state = PCI_ERS_RESULT_RECOVERED;
+
return PCI_ERS_RESULT_RECOVERED;
}
@@ -296,13 +306,90 @@ static irqreturn_t dpc_irq(int irq, void *context)
return IRQ_HANDLED;
}
+static void dpc_error_resume(struct pci_dev *dev)
+{
+ struct dpc_dev *dpc = to_dpc_dev(dev);
+
+ dpc->error_state = PCI_ERS_RESULT_RECOVERED;
+}
+
+#ifdef CONFIG_ACPI
+
+static void edr_handle_event(acpi_handle handle, u32 event, void *data)
+{
+ struct dpc_dev *dpc = (struct dpc_dev *) data;
+ struct pci_dev *pdev = dpc->dev->port;
+ u16 status;
+
+ pci_info(pdev, "ACPI event %x received\n", event);
+
+ if (event != ACPI_NOTIFY_DISCONNECT_RECOVER)
+ return;
+
+ /*
+ * Check if _DSM(0xD) is available, and if present locate the
+ * port which issued EDR event.
+ */
+ pdev = acpi_locate_dpc_port(pdev, dpc->adev->handle);
+ if (!pdev) {
+ pdev = dpc->dev->port;
+ pci_err(pdev, "No valid port found\n");
+ return;
+ }
+
+ dpc = to_dpc_dev(pdev);
+ if (!dpc) {
+ pci_err(pdev, "DPC port is NULL\n");
+ goto done;
+ }
+
+ mutex_lock(&dpc->edr_lock);
+
+ dpc->error_state = PCI_ERS_RESULT_DISCONNECT;
+
+ /*
+ * Check if the port supports DPC:
+ *
+ * If port supports DPC, then fall back to default error
+ * recovery.
+ */
+ if (dpc->cap_pos) {
+ /* Check if there is a valid DPC trigger */
+ pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_STATUS,
+ &status);
+ if (!(status & PCI_EXP_DPC_STATUS_TRIGGER)) {
+ pci_err(pdev, "Invalid DPC trigger %x\n", status);
+ goto edr_unlock;
+ }
+ dpc_process_error(dpc);
+ }
+
+ /*
+ * If recovery is successful, send _OST(0xF, BDF << 16 | 0x80)
+ * to firmware. If not successful, send _OST(0xF, BDF << 16 | 0x81).
+ */
+ if (dpc->error_state == PCI_ERS_RESULT_RECOVERED)
+ status = 0x80;
+ else
+ status = 0x81;
+
+ acpi_send_edr_status(pdev, dpc->adev->handle, status);
+
+edr_unlock:
+ mutex_unlock(&dpc->edr_lock);
+done:
+ pci_dev_put(pdev);
+}
+
+#endif
+
#define FLAG(x, y) (((x) & (y)) ? '+' : '-')
static int dpc_probe(struct pcie_device *dev)
{
struct dpc_dev *dpc;
struct pci_dev *pdev = dev->port;
struct device *device = &dev->device;
- int status;
+ int status = 0;
u16 ctl, cap;
dpc = devm_kzalloc(device, sizeof(*dpc), GFP_KERNEL);
@@ -312,6 +399,8 @@ static int dpc_probe(struct pcie_device *dev)
dpc->cap_pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_DPC);
dpc->dev = dev;
set_service_data(dev, dpc);
+ dpc->error_state = PCI_ERS_RESULT_NONE;
+ mutex_init(&dpc->edr_lock);
if (pcie_aer_get_firmware_first(pdev))
dpc->firmware_dpc = 1;
@@ -334,6 +423,39 @@ static int dpc_probe(struct pcie_device *dev)
}
}
+#ifdef CONFIG_ACPI
+ if (dpc->firmware_dpc) {
+ struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+ acpi_status astatus;
+
+ if (!adev) {
+ pci_err(pdev, "No valid ACPI device found\n");
+ return -ENODEV;
+ }
+
+ dpc->adev = adev;
+
+ astatus = acpi_install_notify_handler(adev->handle,
+ ACPI_SYSTEM_NOTIFY,
+ edr_handle_event,
+ dpc);
+
+ if (ACPI_FAILURE(astatus)) {
+ pci_err(pdev,
+ "Install ACPI_SYSTEM_NOTIFY handler failed\n");
+ return -EBUSY;
+ }
+
+ status = acpi_enable_dpc_port(pdev, adev->handle, true);
+ if (status) {
+ pci_err(pdev, "Enable DPC port failed\n");
+ acpi_remove_notify_handler(adev->handle,
+ ACPI_SYSTEM_NOTIFY,
+ edr_handle_event);
+ return status;
+ }
+ }
+#endif
pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CAP, &cap);
pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, &ctl);
@@ -384,6 +506,7 @@ static struct pcie_port_service_driver dpcdriver = {
.probe = dpc_probe,
.remove = dpc_remove,
.reset_link = dpc_reset_link,
+ .error_resume = dpc_error_resume,
};
int __init pcie_dpc_init(void)
@@ -117,6 +117,17 @@ static inline void acpi_pci_add_bus(struct pci_bus *bus) { }
static inline void acpi_pci_remove_bus(struct pci_bus *bus) { }
#endif /* CONFIG_ACPI */
+#if defined(CONFIG_PCIE_DPC) && defined(CONFIG_ACPI)
+#define EDR_PORT_ENABLE_DSM 0x0C
+#define EDR_PORT_LOCATE_DSM 0x0D
+int acpi_enable_dpc_port(struct pci_dev *pdev, acpi_handle handle,
+ bool enable);
+struct pci_dev *acpi_locate_dpc_port(struct pci_dev *pdev,
+ acpi_handle handle);
+int acpi_send_edr_status(struct pci_dev *pdev,
+ acpi_handle handle, u16 status);
+#endif
+
#ifdef CONFIG_ACPI_APEI
extern bool aer_acpi_firmware_first(void);
#else