[3/8] ARM: tegra: jetson-tk1: Move PLL power supplies to XUSB pad controller
diff mbox series

Message ID 20190404112511.28118-3-thierry.reding@gmail.com
State Accepted
Headers show
Series
  • [1/8] dt-bindings: phy: tegra-xusb: List PLL power supplies
Related show

Commit Message

Thierry Reding April 4, 2019, 11:25 a.m. UTC
From: Thierry Reding <treding@nvidia.com>

The XUSB pad controller is responsible for supplying power to the PLLs
used to drive the various USB, PCI and SATA pads. Move the PLL power
supplies from the PCIe and XUSB controllers to the XUSB pad controller
to make sure they are available when needed.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 arch/arm/boot/dts/tegra124-jetson-tk1.dts | 5 +++++
 1 file changed, 5 insertions(+)

Patch
diff mbox series

diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 33bbb1c5285d..d5fd642f8b77 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1721,6 +1721,11 @@ 
 	padctl@7009f000 {
 		status = "okay";
 
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+
 		pads {
 			usb2 {
 				status = "okay";