Message ID | 20190113154716.5145-11-masneyb@onstation.org |
---|---|
State | New |
Headers | show |
Series | qcom: spmi: add support for hierarchical IRQ chip | expand |
Quoting Brian Masney (2019-01-13 07:47:12) > Add interrupt controller properties now that spmi-gpio is a proper > hierarchical IRQ chip. The interrupts property is no longer needed so > remove it. > > This change was not tested on any hardware but the same change was > tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with > no issues. > > Signed-off-by: Brian Masney <masneyb@onstation.org> > --- Reviewed-by: Stephen Boyd <sboyd@kernel.org>
On Sun 13 Jan 07:47 PST 2019, Brian Masney wrote: > Add interrupt controller properties now that spmi-gpio is a proper > hierarchical IRQ chip. The interrupts property is no longer needed so > remove it. > > This change was not tested on any hardware but the same change was > tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with > no issues. > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Signed-off-by: Brian Masney <masneyb@onstation.org> > --- > This is a new patch introduced in V4. > > arch/arm64/boot/dts/qcom/pm8005.dtsi | 6 ++---- > 1 file changed, 2 insertions(+), 4 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi > index 4d5aca3eeb69..c0ddf128136c 100644 > --- a/arch/arm64/boot/dts/qcom/pm8005.dtsi > +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi > @@ -16,10 +16,8 @@ > reg = <0xc000>; > gpio-controller; > #gpio-cells = <2>; > - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, > - <0 0xc1 0 IRQ_TYPE_NONE>, > - <0 0xc2 0 IRQ_TYPE_NONE>, > - <0 0xc3 0 IRQ_TYPE_NONE>; > + interrupt-controller; > + #interrupt-cells = <2>; > }; > > }; > -- > 2.17.2 >
diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi index 4d5aca3eeb69..c0ddf128136c 100644 --- a/arch/arm64/boot/dts/qcom/pm8005.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi @@ -16,10 +16,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; };
Add interrupt controller properties now that spmi-gpio is a proper hierarchical IRQ chip. The interrupts property is no longer needed so remove it. This change was not tested on any hardware but the same change was tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with no issues. Signed-off-by: Brian Masney <masneyb@onstation.org> --- This is a new patch introduced in V4. arch/arm64/boot/dts/qcom/pm8005.dtsi | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)