Message ID | 20190108185414.26922-4-sam@ravnborg.org |
---|---|
State | Superseded |
Headers | show |
Series | add quartz load support to NXP rtc drivers | expand |
On Tue, Jan 08, 2019 at 07:54:12PM +0100, Sam Ravnborg wrote: > The NXP pcf85063 supports two different xtal load capacitance > - 7000fF (7pF) HW default, Linux driver default > - 12500fF (12.5pF) Minimum power consumption > > To obtain a precise RTC the pcf85063 must be configured > with the correct capacitance load of the xtal. > > Add a property to specify the xtal capacitance load. > The default value matches that of the current Linux driver. > > With a dedicated binding remove the entry in rtc.txt > > Signed-off-by: Søren Andersen <san@skov.dk> > Signed-off-by: Sam Ravnborg <sam@ravnborg.org> > Cc: Alessandro Zummo <a.zummo@towertech.it> > Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Urs Fässler <urs.fassler@bbv.ch> > --- > Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt | 18 ++++++++++++++++++ > Documentation/devicetree/bindings/rtc/rtc.txt | 1 - > 2 files changed, 18 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt > > diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt > new file mode 100644 > index 000000000000..ad5e8eaa370e > --- /dev/null > +++ b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt > @@ -0,0 +1,18 @@ > +* NXP PCF85063 Real Time Clock > + > +Required properties: > +- compatible: Should contain "nxp,pcf85063". > +- reg: I2C address for chip. > + > +Optional property: > +- quartz-load-femtofarads: The capacitive load of the quartz(x-tal), Probably should put this in rtc.txt so it can be shared. > + expressed in femto Farad (fF). Valid values are 7000 and 12500. > + Default value (if no value is specified) is 7000fF. > + > +Example: > + > +pcf85063: pcf85063@51 { rtc@51 > + compatible = "nxp,pcf85063"; > + reg = <0x51>; > + quartz-load-femtofarads = <12500>; > +}; > diff --git a/Documentation/devicetree/bindings/rtc/rtc.txt b/Documentation/devicetree/bindings/rtc/rtc.txt > index e07b15d151ac..efac6dc5b914 100644 > --- a/Documentation/devicetree/bindings/rtc/rtc.txt > +++ b/Documentation/devicetree/bindings/rtc/rtc.txt > @@ -52,7 +52,6 @@ microcrystal,rv3029 Real Time Clock Module with I2C-Bus > nxp,pcf2127 Real-time clock > nxp,pcf2129 Real-time clock > nxp,pcf8563 Real-time clock/calendar > -nxp,pcf85063 Tiny Real-Time Clock > pericom,pt7c4338 Real-time Clock Module > ricoh,r2025sd I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC > ricoh,r2221tl I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC > -- > 2.12.0 >
Hi Rob. > > + > > +Optional property: > > +- quartz-load-femtofarads: The capacitive load of the quartz(x-tal), > > Probably should put this in rtc.txt so it can be shared. Good point - will do and respin the patchset. > > > + expressed in femto Farad (fF). Valid values are 7000 and 12500. > > + Default value (if no value is specified) is 7000fF. > > + > > +Example: > > + > > +pcf85063: pcf85063@51 { > > rtc@51 OK, will change. Sam
diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt new file mode 100644 index 000000000000..ad5e8eaa370e --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt @@ -0,0 +1,18 @@ +* NXP PCF85063 Real Time Clock + +Required properties: +- compatible: Should contain "nxp,pcf85063". +- reg: I2C address for chip. + +Optional property: +- quartz-load-femtofarads: The capacitive load of the quartz(x-tal), + expressed in femto Farad (fF). Valid values are 7000 and 12500. + Default value (if no value is specified) is 7000fF. + +Example: + +pcf85063: pcf85063@51 { + compatible = "nxp,pcf85063"; + reg = <0x51>; + quartz-load-femtofarads = <12500>; +}; diff --git a/Documentation/devicetree/bindings/rtc/rtc.txt b/Documentation/devicetree/bindings/rtc/rtc.txt index e07b15d151ac..efac6dc5b914 100644 --- a/Documentation/devicetree/bindings/rtc/rtc.txt +++ b/Documentation/devicetree/bindings/rtc/rtc.txt @@ -52,7 +52,6 @@ microcrystal,rv3029 Real Time Clock Module with I2C-Bus nxp,pcf2127 Real-time clock nxp,pcf2129 Real-time clock nxp,pcf8563 Real-time clock/calendar -nxp,pcf85063 Tiny Real-Time Clock pericom,pt7c4338 Real-time Clock Module ricoh,r2025sd I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ricoh,r2221tl I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC