@@ -330,7 +330,8 @@ tplink,c20-v4)
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0"
;;
-tplink,c50-v3)
+tplink,c50-v3|\
+tplink,c50-v4)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt"
@@ -218,6 +218,7 @@ ramips_setup_interfaces()
skylab,skw92a|\
tplink,c20-v4|\
tplink,c50-v3|\
+ tplink,c50-v4|\
tplink,tl-mr3420-v5|\
tplink,tl-wr842n-v5|\
tl-wr840n-v4|\
@@ -270,6 +270,7 @@ platform_check_image() {
tplink,c20-v1|\
tplink,c20-v4|\
tplink,c50-v3|\
+ tplink,c50-v4|\
tplink,tl-mr3020-v3|\
tplink,tl-mr3420-v5|\
tplink,tl-wa801nd-v5|\
@@ -370,6 +371,9 @@ platform_do_upgrade() {
ubnt-erx-sfp)
nand_do_upgrade "$ARGV"
;;
+ tplink,c50-v4)
+ platform_upgrade_tpl_recovery "$ARGV"
+ ;;
*)
default_do_upgrade "$ARGV"
;;
new file mode 100644
@@ -0,0 +1,31 @@
+#
+# Copyright (C) 2018 OpenWrt.org
+#
+. /lib/functions/system.sh
+
+tplink_get_uboot_args_partition() {
+ local board=$(board_name)
+
+ case "$board" in
+ tplink,c50-v4)
+ echo "romfile"
+ ;;
+ esac
+}
+
+platform_upgrade_tpl_recovery() {
+ local uboot_args_part=$(tplink_get_uboot_args_partition)
+ local uboot_args_mtd=$(find_mtd_chardev $uboot_args_part)
+
+ dd if=$uboot_args_mtd of=/tmp/romfile && \
+ printf '\xef\xcd\xab\x89' | \
+ dd of=/tmp/romfile bs=1 seek=0 conv=notrunc \
+ && mtd write /tmp/romfile $uboot_args_part
+
+ default_do_upgrade "$ARGV"
+
+ printf '\x00\x00\x00\x00' | \
+ dd of=/tmp/romfile bs=1 seek=0 conv=notrunc \
+ && mtd write /tmp/romfile $uboot_args_part \
+ && rm /tmp/romfile
+}
new file mode 100644
@@ -0,0 +1,100 @@
+/dts-v1/;
+
+#include "TPLINK-8M-SPLIT-UBOOT.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,c50-v4", "mediatek,mt7628an-soc";
+ model = "TP-Link Archer C50 v4";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "c50-v4:green:lan";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "c50-v4:green:power";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "c50-v4:green:wan";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_orange {
+ label = "c50-v4:orange:wan";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "c50-v4:green:wlan2g";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5 {
+ label = "c50-v4:green:wlan5g";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "c50-v4:green:wps";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "gpio", "p0led_an", "p1led_an", "p2led_an",
+ "p3led_an", "p4led_an", "wdt", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&radio 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mtd-mac-address = <&rom 0xf100>;
+ mtd-mac-address-increment = <(-1)>;
+ };
+};
new file mode 100644
@@ -0,0 +1,89 @@
+#include "mt7628an.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ m25p,chunked-io = <32>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "factory-uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "boot";
+ reg = <0x30000 0x20000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x50000 0x770000>;
+ };
+
+ partition@7c0000 {
+ label = "config";
+ reg = <0x7c0000 0x10000>;
+ read-only;
+ };
+
+ rom: partition@7d0000 {
+ label = "rom";
+ reg = <0x7d0000 0x10000>;
+ read-only;
+ };
+
+ partition@7e0000 {
+ label = "romfile";
+ reg = <0x7e0000 0x10000>;
+ };
+
+ radio: partition@7f0000 {
+ label = "radio";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ehci {
+ status = "disabled";
+};
+
+&ohci {
+ status = "disabled";
+};
+
+&wmac {
+ status = "okay";
+ mtd-mac-address = <&rom 0xf100>;
+ mediatek,mtd-eeprom = <&radio 0x0>;
+};
+
+ðernet {
+ mtd-mac-address = <&rom 0xf100>;
+ mediatek,portmap = "llllw";
+};
@@ -239,6 +239,20 @@ define Device/tplink_c50-v3
endef
TARGET_DEVICES += tplink_c50-v3
+define Device/tplink_c50-v4
+ $(Device/tplink)
+ DTS := ArcherC50V4
+ IMAGE_SIZE := 7616k
+ DEVICE_TITLE := TP-Link ArcherC50 v4
+ TPLINK_FLASHLAYOUT := 8MSUmtk
+ TPLINK_HWID := 0x001D589B
+ TPLINK_HWREV := 0x93
+ TPLINK_HWREVADD := 0x2
+ TPLINK_HVERSION := 3
+ IMAGES := sysupgrade.bin
+endef
+TARGET_DEVICES += tplink_c50-v4
+
define Device/tplink_tl-mr3020-v3
$(Device/tplink)
DTS := TL-MR3020V3