[00/11] PCI: Move symbols to drivers/pci/pci.h
mbox series

Message ID 20190711222341.111556-1-skunberg.kelsey@gmail.com
Headers show
Series
  • PCI: Move symbols to drivers/pci/pci.h
Related show

Message

Kelsey Skunberg July 11, 2019, 10:23 p.m. UTC
Move symbols defined in include/linux/pci.h that are only used in
drivers/pci/ to drivers/pci/pci.h.

Symbols only used in drivers/pci/ do not need to be visible to the rest of
the kernel.

Kelsey Skunberg (11):
  PCI: Move #define PCI_PM_* lines to drivers/pci/pci.h
  PCI: Move PME declarations to drivers/pci/pci.h
  PCI: Move *_host_bridge_device() declarations to drivers/pci.pci.h
  PCI: Move PCI Virtual Channel declarations to drivers/pci/pci.h
  PCI: Move pci_hotplug_*_size declarations to drivers/pci/pci.h
  PCI: Move pci_bus_* declarations to drivers/pci/pci.h
  PCI: Move pcie_update_link_speed() to drivers/pci/pci.h
  PCI: Move pci_ats_init() to drivers/pci/pci.h
  PCI: Move ECRC declarations to drivers/pci/pci.h
  PCI: Move PTM declaration to drivers/pci/pci.h
  PCI: Move pci_*_node() declarations to drivers/pci/pci.h

 drivers/pci/pci.h   | 48 ++++++++++++++++++++++++++++++++++++++++++---
 include/linux/pci.h | 47 --------------------------------------------
 2 files changed, 45 insertions(+), 50 deletions(-)

Comments

Bjorn Helgaas July 23, 2019, 11:07 p.m. UTC | #1
On Thu, Jul 11, 2019 at 04:23:30PM -0600, Kelsey Skunberg wrote:
> Move symbols defined in include/linux/pci.h that are only used in
> drivers/pci/ to drivers/pci/pci.h.
> 
> Symbols only used in drivers/pci/ do not need to be visible to the rest of
> the kernel.
> 
> Kelsey Skunberg (11):
>   PCI: Move #define PCI_PM_* lines to drivers/pci/pci.h
>   PCI: Move PME declarations to drivers/pci/pci.h
>   PCI: Move *_host_bridge_device() declarations to drivers/pci.pci.h
>   PCI: Move PCI Virtual Channel declarations to drivers/pci/pci.h
>   PCI: Move pci_hotplug_*_size declarations to drivers/pci/pci.h
>   PCI: Move pci_bus_* declarations to drivers/pci/pci.h
>   PCI: Move pcie_update_link_speed() to drivers/pci/pci.h
>   PCI: Move pci_ats_init() to drivers/pci/pci.h
>   PCI: Move ECRC declarations to drivers/pci/pci.h
>   PCI: Move PTM declaration to drivers/pci/pci.h
>   PCI: Move pci_*_node() declarations to drivers/pci/pci.h
> 
>  drivers/pci/pci.h   | 48 ++++++++++++++++++++++++++++++++++++++++++---
>  include/linux/pci.h | 47 --------------------------------------------
>  2 files changed, 45 insertions(+), 50 deletions(-)

Hi Kelsey,

I didn't get these applied before v5.3-rc1, so now they don't apply
cleanly.  Would you mind refreshing them and posting a v2 that does
apply to my "master" branch (v5.3-rc1)?

Bjorn
Kelsey Skunberg July 23, 2019, 11:24 p.m. UTC | #2
On Tue, Jul 23, 2019 at 06:07:01PM -0500, Bjorn Helgaas wrote:
> On Thu, Jul 11, 2019 at 04:23:30PM -0600, Kelsey Skunberg wrote:
> > Move symbols defined in include/linux/pci.h that are only used in
> > drivers/pci/ to drivers/pci/pci.h.
> > 
> > Symbols only used in drivers/pci/ do not need to be visible to the rest of
> > the kernel.
> > 
> > Kelsey Skunberg (11):
> >   PCI: Move #define PCI_PM_* lines to drivers/pci/pci.h
> >   PCI: Move PME declarations to drivers/pci/pci.h
> >   PCI: Move *_host_bridge_device() declarations to drivers/pci.pci.h
> >   PCI: Move PCI Virtual Channel declarations to drivers/pci/pci.h
> >   PCI: Move pci_hotplug_*_size declarations to drivers/pci/pci.h
> >   PCI: Move pci_bus_* declarations to drivers/pci/pci.h
> >   PCI: Move pcie_update_link_speed() to drivers/pci/pci.h
> >   PCI: Move pci_ats_init() to drivers/pci/pci.h
> >   PCI: Move ECRC declarations to drivers/pci/pci.h
> >   PCI: Move PTM declaration to drivers/pci/pci.h
> >   PCI: Move pci_*_node() declarations to drivers/pci/pci.h
> > 
> >  drivers/pci/pci.h   | 48 ++++++++++++++++++++++++++++++++++++++++++---
> >  include/linux/pci.h | 47 --------------------------------------------
> >  2 files changed, 45 insertions(+), 50 deletions(-)
> 
> Hi Kelsey,
> 
> I didn't get these applied before v5.3-rc1, so now they don't apply
> cleanly.  Would you mind refreshing them and posting a v2 that does
> apply to my "master" branch (v5.3-rc1)?
> 
> Bjorn

Hi Bjorn,

I can absolutely do that. I'll have v2 sent out soon.

-Kelsey