Message ID | 1424868909-21144-1-git-send-email-fabio.estevam@freescale.com |
---|---|
State | Changes Requested |
Delegated to: | Stefano Babic |
Headers | show |
On Wed, Feb 25, 2015 at 9:55 AM, Fabio Estevam <fabio.estevam@freescale.com> wrote: > With UMS support we are able to flash the eMMC from U-boot, which is very > convenient. > > Add UMS support to make the eMMC flashing process easier. > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Hi Fabio, On 25/02/2015 13:55, Fabio Estevam wrote: > With UMS support we are able to flash the eMMC from U-boot, which is very > convenient. > > Add UMS support to make the eMMC flashing process easier. > Maybe you want to say USB and not UMS, is it ? > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > --- > board/warp/warp.c | 6 ++++++ > include/configs/warp.h | 26 ++++++++++++++++++++++++++ > 2 files changed, 32 insertions(+) > > diff --git a/board/warp/warp.c b/board/warp/warp.c > index 3b275c2..21ac5e7 100644 > --- a/board/warp/warp.c > +++ b/board/warp/warp.c > @@ -21,6 +21,7 @@ > #include <watchdog.h> > #include <fsl_esdhc.h> > #include <mmc.h> > +#include <usb.h> > > DECLARE_GLOBAL_DATA_PTR; > > @@ -82,6 +83,11 @@ int board_mmc_init(bd_t *bis) > return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); > } > > +int board_usb_phy_mode(int port) > +{ > + return USB_INIT_DEVICE; > +} > + > int board_early_init_f(void) > { > setup_iomux_uart(); > diff --git a/include/configs/warp.h b/include/configs/warp.h > index 82036e4..cfc2323 100644 > --- a/include/configs/warp.h > +++ b/include/configs/warp.h > @@ -120,6 +120,32 @@ > #define CONFIG_CMD_CACHE > #endif > > +/* USB Configs */ > +#define CONFIG_CMD_USB > +#ifdef CONFIG_CMD_USB > +#define CONFIG_USB_EHCI > +#define CONFIG_USB_EHCI_MX6 > +#define CONFIG_USB_STORAGE > +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET > +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) > +#define CONFIG_MXC_USB_FLAGS 0 > +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG2 port enabled */ > +#endif > + > +#define CONFIG_CI_UDC > +#define CONFIG_USBD_HS > +#define CONFIG_USB_GADGET_DUALSPEED > + > +#define CONFIG_USB_GADGET > +#define CONFIG_CMD_USB_MASS_STORAGE > +#define CONFIG_USB_GADGET_MASS_STORAGE > +#define CONFIG_USBDOWNLOAD_GADGET > +#define CONFIG_USB_GADGET_VBUS_DRAW 2 > + > +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 > +#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 > +#define CONFIG_G_DNL_MANUFACTURER "FSL" > + > #define CONFIG_EXTRA_ENV_SETTINGS \ > "script=boot.scr\0" \ > "image=zImage\0" \ > Best regards, Stefano
On 27/02/2015 09:37, Stefano Babic wrote: > Hi Fabio, > > On 25/02/2015 13:55, Fabio Estevam wrote: >> With UMS support we are able to flash the eMMC from U-boot, which is very >> convenient. >> >> Add UMS support to make the eMMC flashing process easier. >> > > Maybe you want to say USB and not UMS, is it ? ok, after a coffe I get now this is User Mass Storage. I should remember to take always a coffe before reading patches... Best regards, Stefano
diff --git a/board/warp/warp.c b/board/warp/warp.c index 3b275c2..21ac5e7 100644 --- a/board/warp/warp.c +++ b/board/warp/warp.c @@ -21,6 +21,7 @@ #include <watchdog.h> #include <fsl_esdhc.h> #include <mmc.h> +#include <usb.h> DECLARE_GLOBAL_DATA_PTR; @@ -82,6 +83,11 @@ int board_mmc_init(bd_t *bis) return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); } +int board_usb_phy_mode(int port) +{ + return USB_INIT_DEVICE; +} + int board_early_init_f(void) { setup_iomux_uart(); diff --git a/include/configs/warp.h b/include/configs/warp.h index 82036e4..cfc2323 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -120,6 +120,32 @@ #define CONFIG_CMD_CACHE #endif +/* USB Configs */ +#define CONFIG_CMD_USB +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG2 port enabled */ +#endif + +#define CONFIG_CI_UDC +#define CONFIG_USBD_HS +#define CONFIG_USB_GADGET_DUALSPEED + +#define CONFIG_USB_GADGET +#define CONFIG_CMD_USB_MASS_STORAGE +#define CONFIG_USB_GADGET_MASS_STORAGE +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_VBUS_DRAW 2 + +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 +#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 +#define CONFIG_G_DNL_MANUFACTURER "FSL" + #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \
With UMS support we are able to flash the eMMC from U-boot, which is very convenient. Add UMS support to make the eMMC flashing process easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> --- board/warp/warp.c | 6 ++++++ include/configs/warp.h | 26 ++++++++++++++++++++++++++ 2 files changed, 32 insertions(+)