| Message ID | 1424451874-25375-6-git-send-email-thomas.petazzoni@free-electrons.com |
|---|---|
| State | New |
| Headers | show |
Hi Thomas, On 20/02/2015 18:04, Thomas Petazzoni wrote: > This commit adds the stdout-path property in /chosen for all Armada > boards that were not yet carrying this property. I though the main motivation for using the stdout-path property was for removing the earlyprintk in the command line. Arnd told that there should be a mean to use stdout-path instead of earlyprintk. So what about going further and removing "earlyprintk" in the same time? Thanks, Gregory > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > --- > arch/arm/boot/dts/armada-370-db.dts | 1 + > arch/arm/boot/dts/armada-370-mirabox.dts | 1 + > arch/arm/boot/dts/armada-370-netgear-rn102.dts | 1 + > arch/arm/boot/dts/armada-370-netgear-rn104.dts | 1 + > arch/arm/boot/dts/armada-370-rd.dts | 1 + > arch/arm/boot/dts/armada-375-db.dts | 1 + > arch/arm/boot/dts/armada-388-db.dts | 1 + > arch/arm/boot/dts/armada-388-rd.dts | 1 + > arch/arm/boot/dts/armada-xp-axpwifiap.dts | 1 + > arch/arm/boot/dts/armada-xp-db.dts | 1 + > arch/arm/boot/dts/armada-xp-gp.dts | 1 + > arch/arm/boot/dts/armada-xp-matrix.dts | 1 + > arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 1 + > arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 1 + > 14 files changed, 14 insertions(+) > > diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts > index e993c46..286bedd 100644 > --- a/arch/arm/boot/dts/armada-370-db.dts > +++ b/arch/arm/boot/dts/armada-370-db.dts > @@ -56,6 +56,7 @@ > > chosen { > bootargs = "console=ttyS0,115200 earlyprintk"; > + stdout-path = &uart0; > }; > > memory { > diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts > index b10ceb4..ec77b86 100644 > --- a/arch/arm/boot/dts/armada-370-mirabox.dts > +++ b/arch/arm/boot/dts/armada-370-mirabox.dts > @@ -52,6 +52,7 @@ > > chosen { > bootargs = "console=ttyS0,115200 earlyprintk"; > + stdout-path = &uart0; > }; > > memory { > diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts > index 7c5c4ff..8c786cf 100644 > --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts > +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts > @@ -54,6 +54,7 @@ > > chosen { > bootargs = "console=ttyS0,115200 earlyprintk"; > + stdout-path = &uart0; > }; > > memory { > diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts > index 1de53b5..1d64532 100644 > --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts > +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts > @@ -54,6 +54,7 @@ > > chosen { > bootargs = "console=ttyS0,115200 earlyprintk"; > + stdout-path = &uart0; > }; > > memory { > diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts > index 6ae36a3..f40d35b 100644 > --- a/arch/arm/boot/dts/armada-370-rd.dts > +++ b/arch/arm/boot/dts/armada-370-rd.dts > @@ -65,6 +65,7 @@ > > chosen { > bootargs = "console=ttyS0,115200 earlyprintk"; > + stdout-path = &uart0; > }; > > memory { > diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts > index 0440891..033665c 100644 > --- a/arch/arm/boot/dts/armada-375-db.dts > +++ b/arch/arm/boot/dts/armada-375-db.dts > @@ -56,6 +56,7 @@ > > chosen { > bootargs = "console=ttyS0,115200 earlyprintk"; > + stdout-path = &uart0; > }; > > memory { > diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts > index af6c74e..c56ccd74 100644 > --- a/arch/arm/boot/dts/armada-388-db.dts > +++ b/arch/arm/boot/dts/armada-388-db.dts > @@ -55,6 +55,7 @@ > > chosen { > bootargs = "console=ttyS0,115200 earlyprintk"; > + stdout-path = &uart0; > }; > > memory { > diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts > index d99baac..e17edbb 100644 > --- a/arch/arm/boot/dts/armada-388-rd.dts > +++ b/arch/arm/boot/dts/armada-388-rd.dts > @@ -56,6 +56,7 @@ > > chosen { > bootargs = "console=ttyS0,115200 earlyprintk"; > + stdout-path = &uart0; > }; > > memory { > diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts > index c1fbab2..a7fd474 100644 > --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts > +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts > @@ -60,6 +60,7 @@ > > chosen { > bootargs = "console=ttyS0,115200 earlyprintk"; > + stdout-path = &uart0; > }; > > memory { > diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts > index 48bdafe..a12e159 100644 > --- a/arch/arm/boot/dts/armada-xp-db.dts > +++ b/arch/arm/boot/dts/armada-xp-db.dts > @@ -65,6 +65,7 @@ > > chosen { > bootargs = "console=ttyS0,115200 earlyprintk"; > + stdout-path = &uart0; > }; > > memory { > diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts > index 206aebb..8a2e49e 100644 > --- a/arch/arm/boot/dts/armada-xp-gp.dts > +++ b/arch/arm/boot/dts/armada-xp-gp.dts > @@ -66,6 +66,7 @@ > > chosen { > bootargs = "console=ttyS0,115200 earlyprintk"; > + stdout-path = &uart0; > }; > > memory { > diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts > index 56f958e..3e81f22 100644 > --- a/arch/arm/boot/dts/armada-xp-matrix.dts > +++ b/arch/arm/boot/dts/armada-xp-matrix.dts > @@ -53,6 +53,7 @@ > > chosen { > bootargs = "console=ttyS0,115200 earlyprintk"; > + stdout-path = &uart0; > }; > > memory { > diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts > index a7ceafd..508a395 100644 > --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts > +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts > @@ -54,6 +54,7 @@ > > chosen { > bootargs = "console=ttyS0,115200 earlyprintk"; > + stdout-path = &uart0; > }; > > memory { > diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts > index 0c76d9f..7b2ea2060 100644 > --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts > +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts > @@ -55,6 +55,7 @@ > > chosen { > bootargs = "console=ttyS0,115200 earlyprintk"; > + stdout-path = &uart0; > }; > > memory { >
On Mon, Feb 23, 2015 at 10:00 AM, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote: > Hi Thomas, > > On 20/02/2015 18:04, Thomas Petazzoni wrote: >> This commit adds the stdout-path property in /chosen for all Armada >> boards that were not yet carrying this property. > > I though the main motivation for using the stdout-path property was > for removing the earlyprintk in the command line. Arnd told that there > should be a mean to use stdout-path instead of earlyprintk. > > So what about going further and removing "earlyprintk" in the same time? Not exactly, stdout-path allows for removing "console" from the command line. earlyprintk is a debug/developer option, so it should not be in a default command line IMO. So bootargs should be removed entirely. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dear Rob Herring, On Mon, 23 Feb 2015 10:50:26 -0600, Rob Herring wrote: > Not exactly, stdout-path allows for removing "console" from the > command line. earlyprintk is a debug/developer option, so it should > not be in a default command line IMO. > > So bootargs should be removed entirely. Ok, will be in v3, rebased on top of 4.0-rc1. I also noticed another issue in the patch series: missing Armada 375 UART aliases. I'll fix that up as well when sending v3. Thanks for the feedback! Thomas
On Fri, Feb 20, 2015 at 05:04:24PM +0000, Thomas Petazzoni wrote: > This commit adds the stdout-path property in /chosen for all Armada > boards that were not yet carrying this property. > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > --- > arch/arm/boot/dts/armada-370-db.dts | 1 + > arch/arm/boot/dts/armada-370-mirabox.dts | 1 + > arch/arm/boot/dts/armada-370-netgear-rn102.dts | 1 + > arch/arm/boot/dts/armada-370-netgear-rn104.dts | 1 + > arch/arm/boot/dts/armada-370-rd.dts | 1 + > arch/arm/boot/dts/armada-375-db.dts | 1 + > arch/arm/boot/dts/armada-388-db.dts | 1 + > arch/arm/boot/dts/armada-388-rd.dts | 1 + > arch/arm/boot/dts/armada-xp-axpwifiap.dts | 1 + > arch/arm/boot/dts/armada-xp-db.dts | 1 + > arch/arm/boot/dts/armada-xp-gp.dts | 1 + > arch/arm/boot/dts/armada-xp-matrix.dts | 1 + > arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 1 + > arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 1 + > 14 files changed, 14 insertions(+) > > diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts > index e993c46..286bedd 100644 > --- a/arch/arm/boot/dts/armada-370-db.dts > +++ b/arch/arm/boot/dts/armada-370-db.dts > @@ -56,6 +56,7 @@ > > chosen { > bootargs = "console=ttyS0,115200 earlyprintk"; > + stdout-path = &uart0; stdout-path can now take a config too (including the rate), which will avoid any reliance on the serial core choosing the right rate by default. If you have an alias serial0, this could be: stdout-path = "serial0:115200n8"; Otherwise you can use the full path instead of serial0. That's documented in Documentation/devicetree/bindings/chosen.txt Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Rob, Mark, On Mon, 23 Feb 2015 10:50:26 -0600, Rob Herring wrote: > On Mon, Feb 23, 2015 at 10:00 AM, Gregory CLEMENT > Not exactly, stdout-path allows for removing "console" from the > command line. earlyprintk is a debug/developer option, so it should > not be in a default command line IMO. > > So bootargs should be removed entirely. Unfortunately, this doesn't seem to work at all: - Setting /chosen/stdout-path = &uart0; and still console=ttyS0,115200 in /chosen/bootargs works fine. I see a call to add_preferred_console fairly early in the boot: [ 0.000000] Kernel command line: loglevel=8 ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs console=ttyS0,115200 earlyprintk [ 0.000000] ------> name=ttyS, idx=0, options=115200, brl_options=(null) [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) But of course, this is not the case we're interested in. Note that the line "------>" is printed in __add_preferred_console(). - Setting just /chosen/stdout-path = &uart0; and removing completely /chosen/bootargs, there are no kernel messages displayed at all. Fortunately, my userspace hooks up on ttyS0, so I can run "dmesg" and see when add_preferred_console gets called, and with what arguments. It gets called much, much later, i.e only when the serial port itself is initialized: [ 0.484951] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.486822] ------> name=ttyS, idx=0, options=(null), brl_options=(null) [ 0.506838] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 21, base_baud = 12500000) is a 16550A [ 9.106098] console [ttyS0] enabled So it gets the right port name, the right idx, just the options are null. It shouldn't be an issue since the serial port is already initialized by the bootloader. - So I tried something like stdout-path = "serial0@12000:115200n8"; and here the result is even more interesting: it simply crashes the kernel! So some random data in DT makes the stuff crash. [ 0.000000] ==> of_alias_scan: serial0@12000:115200n8 [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 0000000c [ 0.000000] pgd = c0004000 [ 0.000000] [0000000c] *pgd=00000000 [ 0.000000] Internal error: Oops: 5 [#1] SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.0.0-rc1-00016-g0d60469-dirty #466 [ 0.000000] Hardware name: Marvell Armada 39x (Device Tree) [ 0.000000] task: c088b468 ti: c0886000 task.ti: c0886000 [ 0.000000] PC is at of_alias_scan+0xa4/0x2bc [ 0.000000] LR is at of_find_node_opts_by_path+0xac/0x230 [ 0.000000] pc : [<c03b62b4>] lr : [<c03b4b68>] psr: 600001d3 [ 0.000000] sp : c0887f38 ip : 00000000 fp : c08e05a4 [ 0.000000] r10: 80000200 r9 : c05df908 r8 : c06aec30 [ 0.000000] r7 : c088c3a4 r6 : c0890728 r5 : c253dba0 r4 : c08eb334 [ 0.000000] r3 : 00000000 r2 : c253dbae r1 : 00000000 r0 : c0630594 [ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c5387d Table: 0000404a DAC: 00000015 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc0886220) [ 0.000000] Stack: (0xc0887f38 to 0xc0888000) [ 0.000000] 7f20: 00000000 0002f7ff [ 0.000000] 7f40: 00001000 00002370 00000001 c0888408 c06b8a2c c0890728 c088c3a4 ef7fce40 [ 0.000000] 7f60: c05df908 80000200 c08e05a4 c06942bc ffffffff 10c5387d c08c2e00 c0887fd4 [ 0.000000] 7f80: 00000000 00000000 00000000 c0053f98 c05de48c c0887fb4 00000000 00000000 [ 0.000000] 7fa0: c08c2cc0 c0888400 ffffffff c08c2cc0 00000000 00000000 00000000 c0691960 [ 0.000000] 7fc0: 00000000 00000000 00000000 00000000 00000000 c06c3a78 c08c2f54 c0888480 [ 0.000000] 7fe0: c06c3a74 c088c4b4 0000406a 414fc091 00000000 00008074 00000000 00000000 [ 0.000000] [<c03b62b4>] (of_alias_scan) from [<c06942bc>] (setup_arch+0x6bc/0x8b8) [ 0.000000] [<c06942bc>] (setup_arch) from [<c0691960>] (start_kernel+0xa0/0x3a0) [ 0.000000] [<c0691960>] (start_kernel) from [<00008074>] (0x8074) [ 0.000000] Code: e594300c e3000594 e5942010 e34c0063 (e593100c) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! It is worth mentioning that this also happens with stdout-path = "uart0:115200n8"; which was explicitly suggested by Mark in his e-mail. uart0 is an alias to the proper DT node, since stdout-path = &uart0; works almost fine. This is all on v4.0-rc1. Seems like this stdout-path feature is not quite working in all situations yet. Best regards, Thomas
On Fri, Feb 27, 2015 at 10:48 AM, Thomas Petazzoni <thomas.petazzoni@free-electrons.com> wrote: > Rob, Mark, > > On Mon, 23 Feb 2015 10:50:26 -0600, Rob Herring wrote: >> On Mon, Feb 23, 2015 at 10:00 AM, Gregory CLEMENT > >> Not exactly, stdout-path allows for removing "console" from the >> command line. earlyprintk is a debug/developer option, so it should >> not be in a default command line IMO. >> >> So bootargs should be removed entirely. > > Unfortunately, this doesn't seem to work at all: This must have all been tested on QEMU (or Fast Models?) which ignores baud rate. > - Setting /chosen/stdout-path = &uart0; and still console=ttyS0,115200 > in /chosen/bootargs works fine. I see a call to > add_preferred_console fairly early in the boot: > > [ 0.000000] Kernel command line: loglevel=8 ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs console=ttyS0,115200 earlyprintk > [ 0.000000] ------> name=ttyS, idx=0, options=115200, brl_options=(null) > [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) > > But of course, this is not the case we're interested in. Note that > the line "------>" is printed in __add_preferred_console(). > > - Setting just /chosen/stdout-path = &uart0; and removing > completely /chosen/bootargs, there are no kernel messages displayed > at all. Fortunately, my userspace hooks up on ttyS0, so I can run > "dmesg" and see when add_preferred_console gets called, and with > what arguments. It gets called much, much later, i.e only when the > serial port itself is initialized: > > [ 0.484951] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > [ 0.486822] ------> name=ttyS, idx=0, options=(null), brl_options=(null) > [ 0.506838] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 21, base_baud = 12500000) is a 16550A > [ 9.106098] console [ttyS0] enabled > > So it gets the right port name, the right idx, just the options are > null. It shouldn't be an issue since the serial port is already > initialized by the bootloader. I think the default baudrate is 9600, not what the bootloader set. > - So I tried something like stdout-path = "serial0@12000:115200n8"; > and here the result is even more interesting: it simply crashes the > kernel! So some random data in DT makes the stuff crash. You need the full path here though. But garbage should not crash things. Peter Hurley found just yesterday that the path parsing doesn't work right with options. Only alias parsing works. > [ 0.000000] ==> of_alias_scan: serial0@12000:115200n8 > [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 0000000c > [ 0.000000] pgd = c0004000 > [ 0.000000] [0000000c] *pgd=00000000 > [ 0.000000] Internal error: Oops: 5 [#1] SMP ARM > [ 0.000000] Modules linked in: > [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.0.0-rc1-00016-g0d60469-dirty #466 > [ 0.000000] Hardware name: Marvell Armada 39x (Device Tree) > [ 0.000000] task: c088b468 ti: c0886000 task.ti: c0886000 > [ 0.000000] PC is at of_alias_scan+0xa4/0x2bc > [ 0.000000] LR is at of_find_node_opts_by_path+0xac/0x230 > [ 0.000000] pc : [<c03b62b4>] lr : [<c03b4b68>] psr: 600001d3 > [ 0.000000] sp : c0887f38 ip : 00000000 fp : c08e05a4 > [ 0.000000] r10: 80000200 r9 : c05df908 r8 : c06aec30 > [ 0.000000] r7 : c088c3a4 r6 : c0890728 r5 : c253dba0 r4 : c08eb334 > [ 0.000000] r3 : 00000000 r2 : c253dbae r1 : 00000000 r0 : c0630594 > [ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel > [ 0.000000] Control: 10c5387d Table: 0000404a DAC: 00000015 > [ 0.000000] Process swapper (pid: 0, stack limit = 0xc0886220) > [ 0.000000] Stack: (0xc0887f38 to 0xc0888000) > [ 0.000000] 7f20: 00000000 0002f7ff > [ 0.000000] 7f40: 00001000 00002370 00000001 c0888408 c06b8a2c c0890728 c088c3a4 ef7fce40 > [ 0.000000] 7f60: c05df908 80000200 c08e05a4 c06942bc ffffffff 10c5387d c08c2e00 c0887fd4 > [ 0.000000] 7f80: 00000000 00000000 00000000 c0053f98 c05de48c c0887fb4 00000000 00000000 > [ 0.000000] 7fa0: c08c2cc0 c0888400 ffffffff c08c2cc0 00000000 00000000 00000000 c0691960 > [ 0.000000] 7fc0: 00000000 00000000 00000000 00000000 00000000 c06c3a78 c08c2f54 c0888480 > [ 0.000000] 7fe0: c06c3a74 c088c4b4 0000406a 414fc091 00000000 00008074 00000000 00000000 > [ 0.000000] [<c03b62b4>] (of_alias_scan) from [<c06942bc>] (setup_arch+0x6bc/0x8b8) > [ 0.000000] [<c06942bc>] (setup_arch) from [<c0691960>] (start_kernel+0xa0/0x3a0) > [ 0.000000] [<c0691960>] (start_kernel) from [<00008074>] (0x8074) > [ 0.000000] Code: e594300c e3000594 e5942010 e34c0063 (e593100c) > [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- > [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! > [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! > > It is worth mentioning that this also happens with > > stdout-path = "uart0:115200n8"; > > which was explicitly suggested by Mark in his e-mail. uart0 is an alias > to the proper DT node, since stdout-path = &uart0; works almost fine. Mark forgot the '&'. So does 'stdout-path = "&uart0:115200n8";' work? Rob -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dear Rob Herring, On Fri, 27 Feb 2015 11:42:43 -0600, Rob Herring wrote: > > Unfortunately, this doesn't seem to work at all: > > This must have all been tested on QEMU (or Fast Models?) which ignores > baud rate. Ok. > > So it gets the right port name, the right idx, just the options are > > null. It shouldn't be an issue since the serial port is already > > initialized by the bootloader. > > I think the default baudrate is 9600, not what the bootloader set. That might explain the issue then. > You need the full path here though. But garbage should not crash things. Indeed, I was surprised that a different DT string was crashing the kernel. > > It is worth mentioning that this also happens with > > > > stdout-path = "uart0:115200n8"; > > > > which was explicitly suggested by Mark in his e-mail. uart0 is an alias > > to the proper DT node, since stdout-path = &uart0; works almost fine. > > Mark forgot the '&'. So does 'stdout-path = "&uart0:115200n8";' work? I don't have the board at hand right now, will try this on Tuesday when coming back to the office. Thanks for the suggestion! Best regards, Thomas
Dear Rob Herring, On Fri, 27 Feb 2015 11:42:43 -0600, Rob Herring wrote: > > It is worth mentioning that this also happens with > > > > stdout-path = "uart0:115200n8"; > > > > which was explicitly suggested by Mark in his e-mail. uart0 is an alias > > to the proper DT node, since stdout-path = &uart0; works almost fine. > > Mark forgot the '&'. So does 'stdout-path = "&uart0:115200n8";' work? Nah, there is really no '&' needed, Mark was right. What was wrong in my setup was that uart0 was a *label* for the serial port DT node, and not an alias. Once I created an alias 'serial0' for '&uart0', things started working all right. Thanks, Thomas
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index e993c46..286bedd 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -56,6 +56,7 @@ chosen { bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart0; }; memory { diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index b10ceb4..ec77b86 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -52,6 +52,7 @@ chosen { bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart0; }; memory { diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 7c5c4ff..8c786cf 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -54,6 +54,7 @@ chosen { bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart0; }; memory { diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 1de53b5..1d64532 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -54,6 +54,7 @@ chosen { bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart0; }; memory { diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 6ae36a3..f40d35b 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -65,6 +65,7 @@ chosen { bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart0; }; memory { diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 0440891..033665c 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -56,6 +56,7 @@ chosen { bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart0; }; memory { diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index af6c74e..c56ccd74 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -55,6 +55,7 @@ chosen { bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart0; }; memory { diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts index d99baac..e17edbb 100644 --- a/arch/arm/boot/dts/armada-388-rd.dts +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -56,6 +56,7 @@ chosen { bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart0; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index c1fbab2..a7fd474 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -60,6 +60,7 @@ chosen { bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart0; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 48bdafe..a12e159 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -65,6 +65,7 @@ chosen { bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart0; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 206aebb..8a2e49e 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -66,6 +66,7 @@ chosen { bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart0; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index 56f958e..3e81f22 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -53,6 +53,7 @@ chosen { bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart0; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index a7ceafd..508a395 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -54,6 +54,7 @@ chosen { bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart0; }; memory { diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 0c76d9f..7b2ea2060 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -55,6 +55,7 @@ chosen { bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart0; }; memory {
This commit adds the stdout-path property in /chosen for all Armada boards that were not yet carrying this property. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> --- arch/arm/boot/dts/armada-370-db.dts | 1 + arch/arm/boot/dts/armada-370-mirabox.dts | 1 + arch/arm/boot/dts/armada-370-netgear-rn102.dts | 1 + arch/arm/boot/dts/armada-370-netgear-rn104.dts | 1 + arch/arm/boot/dts/armada-370-rd.dts | 1 + arch/arm/boot/dts/armada-375-db.dts | 1 + arch/arm/boot/dts/armada-388-db.dts | 1 + arch/arm/boot/dts/armada-388-rd.dts | 1 + arch/arm/boot/dts/armada-xp-axpwifiap.dts | 1 + arch/arm/boot/dts/armada-xp-db.dts | 1 + arch/arm/boot/dts/armada-xp-gp.dts | 1 + arch/arm/boot/dts/armada-xp-matrix.dts | 1 + arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 1 + arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 1 + 14 files changed, 14 insertions(+)