@@ -313,7 +313,7 @@ void cpu_loop(CPUX86State *env)
#endif
case EXCP0B_NOSEG:
case EXCP0C_STACK:
- info.si_signo = SIGBUS;
+ info.si_signo = TARGET_SIGBUS;
info.si_errno = 0;
info.si_code = TARGET_SI_KERNEL;
info._sifields._sigfault._addr = 0;
@@ -327,7 +327,7 @@ void cpu_loop(CPUX86State *env)
} else
#endif
{
- info.si_signo = SIGSEGV;
+ info.si_signo = TARGET_SIGSEGV;
info.si_errno = 0;
info.si_code = TARGET_SI_KERNEL;
info._sifields._sigfault._addr = 0;
@@ -335,7 +335,7 @@ void cpu_loop(CPUX86State *env)
}
break;
case EXCP0E_PAGE:
- info.si_signo = SIGSEGV;
+ info.si_signo = TARGET_SIGSEGV;
info.si_errno = 0;
if (!(env->error_code & 1))
info.si_code = TARGET_SEGV_MAPERR;
@@ -352,7 +352,7 @@ void cpu_loop(CPUX86State *env)
#endif
{
/* division by zero */
- info.si_signo = SIGFPE;
+ info.si_signo = TARGET_SIGFPE;
info.si_errno = 0;
info.si_code = TARGET_FPE_INTDIV;
info._sifields._sigfault._addr = env->eip;
@@ -367,7 +367,7 @@ void cpu_loop(CPUX86State *env)
} else
#endif
{
- info.si_signo = SIGTRAP;
+ info.si_signo = TARGET_SIGTRAP;
info.si_errno = 0;
if (trapnr == EXCP01_DB) {
info.si_code = TARGET_TRAP_BRKPT;
@@ -387,7 +387,7 @@ void cpu_loop(CPUX86State *env)
} else
#endif
{
- info.si_signo = SIGSEGV;
+ info.si_signo = TARGET_SIGSEGV;
info.si_errno = 0;
info.si_code = TARGET_SI_KERNEL;
info._sifields._sigfault._addr = 0;
@@ -395,7 +395,7 @@ void cpu_loop(CPUX86State *env)
}
break;
case EXCP06_ILLOP:
- info.si_signo = SIGILL;
+ info.si_signo = TARGET_SIGILL;
info.si_errno = 0;
info.si_code = TARGET_ILL_ILLOPN;
info._sifields._sigfault._addr = env->eip;
@@ -517,7 +517,7 @@ segv:
end_exclusive();
/* We get the PC of the entry address - which is as good as anything,
on a real kernel what you get depends on which mode it uses. */
- info.si_signo = SIGSEGV;
+ info.si_signo = TARGET_SIGSEGV;
info.si_errno = 0;
/* XXX: check env->error_code */
info.si_code = TARGET_SEGV_MAPERR;
@@ -692,7 +692,7 @@ void cpu_loop(CPUARMState *env)
rc = EmulateAll(opcode, &ts->fpa, env);
if (rc == 0) { /* illegal instruction */
- info.si_signo = SIGILL;
+ info.si_signo = TARGET_SIGILL;
info.si_errno = 0;
info.si_code = TARGET_ILL_ILLOPN;
info._sifields._sigfault._addr = env->regs[15];
@@ -716,7 +716,7 @@ void cpu_loop(CPUARMState *env)
//printf("fpsr 0x%x, arm_fpe 0x%x\n",fpsr,arm_fpe);
if (fpsr & (arm_fpe << 16)) { /* exception enabled? */
- info.si_signo = SIGFPE;
+ info.si_signo = TARGET_SIGFPE;
info.si_errno = 0;
/* ordered by priority, least first */
@@ -840,7 +840,7 @@ void cpu_loop(CPUARMState *env)
case EXCP_DATA_ABORT:
addr = env->exception.vaddress;
{
- info.si_signo = SIGSEGV;
+ info.si_signo = TARGET_SIGSEGV;
info.si_errno = 0;
/* XXX: check env->error_code */
info.si_code = TARGET_SEGV_MAPERR;
@@ -1026,7 +1026,7 @@ void cpu_loop(CPUARMState *env)
/* just indicate that signals should be handled asap */
break;
case EXCP_UDEF:
- info.si_signo = SIGILL;
+ info.si_signo = TARGET_SIGILL;
info.si_errno = 0;
info.si_code = TARGET_ILL_ILLOPN;
info._sifields._sigfault._addr = env->pc;
@@ -1039,7 +1039,7 @@ void cpu_loop(CPUARMState *env)
/* fall through for segv */
case EXCP_PREFETCH_ABORT:
case EXCP_DATA_ABORT:
- info.si_signo = SIGSEGV;
+ info.si_signo = TARGET_SIGSEGV;
info.si_errno = 0;
/* XXX: check env->error_code */
info.si_code = TARGET_SEGV_MAPERR;
@@ -1119,7 +1119,7 @@ void cpu_loop(CPUUniCore32State *env)
break;
case UC32_EXCP_DTRAP:
case UC32_EXCP_ITRAP:
- info.si_signo = SIGSEGV;
+ info.si_signo = TARGET_SIGSEGV;
info.si_errno = 0;
/* XXX: check env->error_code */
info.si_code = TARGET_SEGV_MAPERR;
@@ -2664,7 +2664,7 @@ void cpu_loop(CPUOpenRISCState *env)
break;
case EXCP_BUSERR:
qemu_log("\nBus error, exit, pc is %#x\n", env->pc);
- gdbsig = SIGBUS;
+ gdbsig = TARGET_SIGBUS;
break;
case EXCP_DPF:
case EXCP_IPF:
@@ -2676,11 +2676,11 @@ void cpu_loop(CPUOpenRISCState *env)
break;
case EXCP_ALIGN:
qemu_log("\nAlignment pc is %#x\n", env->pc);
- gdbsig = SIGBUS;
+ gdbsig = TARGET_SIGBUS;
break;
case EXCP_ILLEGAL:
qemu_log("\nIllegal instructionpc is %#x\n", env->pc);
- gdbsig = SIGILL;
+ gdbsig = TARGET_SIGILL;
break;
case EXCP_INT:
qemu_log("\nExternal interruptpc is %#x\n", env->pc);
@@ -2691,7 +2691,7 @@ void cpu_loop(CPUOpenRISCState *env)
break;
case EXCP_RANGE:
qemu_log("\nRange\n");
- gdbsig = SIGSEGV;
+ gdbsig = TARGET_SIGSEGV;
break;
case EXCP_SYSCALL:
env->pc += 4; /* 0xc00; */
@@ -2709,7 +2709,7 @@ void cpu_loop(CPUOpenRISCState *env)
break;
case EXCP_TRAP:
qemu_log("\nTrap\n");
- gdbsig = SIGTRAP;
+ gdbsig = TARGET_SIGTRAP;
break;
case EXCP_NR:
qemu_log("\nNR\n");
@@ -2777,7 +2777,7 @@ void cpu_loop(CPUSH4State *env)
break;
case 0xa0:
case 0xc0:
- info.si_signo = SIGSEGV;
+ info.si_signo = TARGET_SIGSEGV;
info.si_errno = 0;
info.si_code = TARGET_SEGV_MAPERR;
info._sifields._sigfault._addr = env->tea;
@@ -2806,7 +2806,7 @@ void cpu_loop(CPUCRISState *env)
switch (trapnr) {
case 0xaa:
{
- info.si_signo = SIGSEGV;
+ info.si_signo = TARGET_SIGSEGV;
info.si_errno = 0;
/* XXX: check env->error_code */
info.si_code = TARGET_SEGV_MAPERR;
@@ -2865,7 +2865,7 @@ void cpu_loop(CPUMBState *env)
switch (trapnr) {
case 0xaa:
{
- info.si_signo = SIGSEGV;
+ info.si_signo = TARGET_SIGSEGV;
info.si_errno = 0;
/* XXX: check env->error_code */
info.si_code = TARGET_SEGV_MAPERR;
@@ -2903,14 +2903,14 @@ void cpu_loop(CPUMBState *env)
switch (env->sregs[SR_ESR] & 31) {
case ESR_EC_DIVZERO:
- info.si_signo = SIGFPE;
+ info.si_signo = TARGET_SIGFPE;
info.si_errno = 0;
info.si_code = TARGET_FPE_FLTDIV;
info._sifields._sigfault._addr = 0;
queue_signal(env, info.si_signo, &info);
break;
case ESR_EC_FPU:
- info.si_signo = SIGFPE;
+ info.si_signo = TARGET_SIGFPE;
info.si_errno = 0;
if (env->sregs[SR_FSR] & FSR_IO) {
info.si_code = TARGET_FPE_FLTINV;
@@ -2987,7 +2987,7 @@ void cpu_loop(CPUM68KState *env)
case EXCP_LINEF:
case EXCP_UNSUPPORTED:
do_sigill:
- info.si_signo = SIGILL;
+ info.si_signo = TARGET_SIGILL;
info.si_errno = 0;
info.si_code = TARGET_ILL_ILLOPN;
info._sifields._sigfault._addr = env->pc;
@@ -3014,7 +3014,7 @@ void cpu_loop(CPUM68KState *env)
break;
case EXCP_ACCESS:
{
- info.si_signo = SIGSEGV;
+ info.si_signo = TARGET_SIGSEGV;
info.si_errno = 0;
/* XXX: check env->error_code */
info.si_code = TARGET_SEGV_MAPERR;
@@ -3317,12 +3317,12 @@ void cpu_loop(CPUS390XState *env)
switch (n) {
case PGM_OPERATION:
case PGM_PRIVILEGED:
- sig = SIGILL;
+ sig = TARGET_SIGILL;
n = TARGET_ILL_ILLOPC;
goto do_signal_pc;
case PGM_PROTECTION:
case PGM_ADDRESSING:
- sig = SIGSEGV;
+ sig = TARGET_SIGSEGV;
/* XXX: check env->error_code */
n = TARGET_SEGV_MAPERR;
addr = env->__excp_addr;
@@ -3332,16 +3332,16 @@ void cpu_loop(CPUS390XState *env)
case PGM_SPECIAL_OP:
case PGM_OPERAND:
do_sigill_opn:
- sig = SIGILL;
+ sig = TARGET_SIGILL;
n = TARGET_ILL_ILLOPN;
goto do_signal_pc;
case PGM_FIXPT_OVERFLOW:
- sig = SIGFPE;
+ sig = TARGET_SIGFPE;
n = TARGET_FPE_INTOVF;
goto do_signal_pc;
case PGM_FIXPT_DIVIDE:
- sig = SIGFPE;
+ sig = TARGET_SIGFPE;
n = TARGET_FPE_INTDIV;
goto do_signal_pc;
@@ -3366,7 +3366,7 @@ void cpu_loop(CPUS390XState *env)
/* ??? Quantum exception; BFP, DFP error. */
goto do_sigill_opn;
}
- sig = SIGFPE;
+ sig = TARGET_SIGFPE;
goto do_signal_pc;
}
In main.c, all SIG* need be change to TARGET_SIG*, since the related next call are all for TARGET_SIG*: queue_signal() and gdb_handlesig(). The related vi operation command is "1,$ s/\<SIG/TARGET_SIG/g". Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> --- linux-user/main.c | 64 +++++++++++++++++++++++++++---------------------------- 1 file changed, 32 insertions(+), 32 deletions(-)