| Message ID | 1418438484-13044-1-git-send-email-gch981213@gmail.com |
|---|---|
| State | Accepted |
| Headers | show |
Hi, gch On 13 December 2014 at 10:41, 郭传鈜 <gch981213@gmail.com> wrote: > Aigale Ai-BR100 is a router with mt7620a soc. > There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led. > IIRC, there are 3 LEDs, but one of them is for power supply indication and cannot be controlled with software :) > Signed-off-by: 郭传鈜 <gch981213@gmail.com> > --- > target/linux/ramips/base-files/etc/board.d/01_leds | 4 + > .../linux/ramips/base-files/etc/board.d/02_network | 1 + > target/linux/ramips/base-files/etc/diag.sh | 3 + > target/linux/ramips/base-files/lib/ramips.sh | 3 + > .../ramips/base-files/lib/upgrade/platform.sh | 1 + > target/linux/ramips/dts/AIBR100.dts | 106 +++++++++++++++++++++ > target/linux/ramips/image/Makefile | 3 + > target/linux/ramips/mt7620/profiles/aigale.mk | 20 ++++ > 8 files changed, 141 insertions(+) > create mode 100644 target/linux/ramips/dts/AIBR100.dts > create mode 100644 target/linux/ramips/mt7620/profiles/aigale.mk > <snip> > diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile > index e0eb8c2..c5478ce 100644 > --- a/target/linux/ramips/image/Makefile > +++ b/target/linux/ramips/image/Makefile > @@ -770,6 +770,8 @@ Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7 > Image/Build/Profile/MT7620a_MT7610e=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e) > Image/Build/Profile/MT7620a_MT7530=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7530,MT7620a_MT7530) > Image/Build/Profile/MT7620a_V22SG=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_v22sg,MT7620a_V22SG) > +br100_mtd_size=8126464 > +Image/Build/Profile/AIBR100=$(call BuildFirmware/CustomFlash/$(1),$(1),ai-br100,AIBR100,$(br100_mtd_size),Ai-BR) Hmm, I remembered that I had to use an initramfs image for OEM installation since boa HTTP server of the OEM firmware uses file size of uploaded firmware instead of ih_size in the uimage header to do CRC checksum. > Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N53) > whr_300hp2_mtd_size=7012352 > Image/Build/Profile/WHR300HP2=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-300hp2,WHR-300HP2,$(whr_300hp2_mtd_size)) > @@ -799,6 +801,7 @@ define Image/Build/Profile/Default > $(call Image/Build/Profile/MT7620a_MT7610e,$(1)) > $(call Image/Build/Profile/MT7620a_MT7530,$(1)) > $(call Image/Build/Profile/MT7620a_V22SG,$(1)) > + $(call Image/Build/Profile/AIBR100,$(1)) > $(call Image/Build/Profile/RP-N53,$(1)) > $(call Image/Build/Profile/DIR-810L,$(1)) > $(call Image/Build/Profile/WHR300HP2,$(1)) > diff --git a/target/linux/ramips/mt7620/profiles/aigale.mk b/target/linux/ramips/mt7620/profiles/aigale.mk > new file mode 100644 > index 0000000..e58ac43 > --- /dev/null > +++ b/target/linux/ramips/mt7620/profiles/aigale.mk > @@ -0,0 +1,20 @@ > +# > +# Copyright (C) 2014 OpenWrt.org > +# > +# This is free software, licensed under the GNU General Public License v2. > +# See /LICENSE for more information. > +# > + > +define Profile/AIBR100 > + NAME:=Aigale Ai-BR100 > + PACKAGES:=\ > + kmod-usb-core \ > + kmod-usb-ohci \ > + kmod-ledtrig-usbdev \ > + kmod-usb2 > +endef kmod-ledtrig-usbdev should be optional. yousong
On 13/12/2014 08:04, Yousong Zhou wrote: >> +define Profile/AIBR100 >> > + NAME:=Aigale Ai-BR100 >> > + PACKAGES:=\ >> > + kmod-usb-core \ >> > + kmod-usb-ohci \ >> > + kmod-ledtrig-usbdev \ >> > + kmod-usb2 >> > +endef > kmod-ledtrig-usbdev should be optional. > > > yousong ... and usb-core gets auto selected. i fixed this while merging it into my tree. John
2014-12-13 15:04 GMT+08:00 Yousong Zhou <yszhou4tech@gmail.com>: > > Hi, gch > > On 13 December 2014 at 10:41, 郭传鈜 <gch981213@gmail.com> wrote: > > Aigale Ai-BR100 is a router with mt7620a soc. > > There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led. > > > > IIRC, there are 3 LEDs, but one of them is for power supply indication > and cannot be controlled with software :) > > > Signed-off-by: 郭传鈜 <gch981213@gmail.com> > > --- > > target/linux/ramips/base-files/etc/board.d/01_leds | 4 + > > .../linux/ramips/base-files/etc/board.d/02_network | 1 + > > target/linux/ramips/base-files/etc/diag.sh | 3 + > > target/linux/ramips/base-files/lib/ramips.sh | 3 + > > .../ramips/base-files/lib/upgrade/platform.sh | 1 + > > target/linux/ramips/dts/AIBR100.dts | 106 +++++++++++++++++++++ > > target/linux/ramips/image/Makefile | 3 + > > target/linux/ramips/mt7620/profiles/aigale.mk | 20 ++++ > > 8 files changed, 141 insertions(+) > > create mode 100644 target/linux/ramips/dts/AIBR100.dts > > create mode 100644 target/linux/ramips/mt7620/profiles/aigale.mk > > > > <snip> > > > diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile > > index e0eb8c2..c5478ce 100644 > > --- a/target/linux/ramips/image/Makefile > > +++ b/target/linux/ramips/image/Makefile > > @@ -770,6 +770,8 @@ Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7 > > Image/Build/Profile/MT7620a_MT7610e=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e) > > Image/Build/Profile/MT7620a_MT7530=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7530,MT7620a_MT7530) > > Image/Build/Profile/MT7620a_V22SG=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_v22sg,MT7620a_V22SG) > > +br100_mtd_size=8126464 > > +Image/Build/Profile/AIBR100=$(call BuildFirmware/CustomFlash/$(1),$(1),ai-br100,AIBR100,$(br100_mtd_size),Ai-BR) > > Hmm, I remembered that I had to use an initramfs image for OEM > installation since boa HTTP server of the OEM firmware uses file size > of uploaded firmware instead of ih_size in the uimage header to do CRC > checksum. > Sorry,I don't know how the image is checked :-( > > Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N53) > > whr_300hp2_mtd_size=7012352 > > Image/Build/Profile/WHR300HP2=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-300hp2,WHR-300HP2,$(whr_300hp2_mtd_size)) > > @@ -799,6 +801,7 @@ define Image/Build/Profile/Default > > $(call Image/Build/Profile/MT7620a_MT7610e,$(1)) > > $(call Image/Build/Profile/MT7620a_MT7530,$(1)) > > $(call Image/Build/Profile/MT7620a_V22SG,$(1)) > > + $(call Image/Build/Profile/AIBR100,$(1)) > > $(call Image/Build/Profile/RP-N53,$(1)) > > $(call Image/Build/Profile/DIR-810L,$(1)) > > $(call Image/Build/Profile/WHR300HP2,$(1)) > > diff --git a/target/linux/ramips/mt7620/profiles/aigale.mk b/target/linux/ramips/mt7620/profiles/aigale.mk > > new file mode 100644 > > index 0000000..e58ac43 > > --- /dev/null > > +++ b/target/linux/ramips/mt7620/profiles/aigale.mk > > @@ -0,0 +1,20 @@ > > +# > > +# Copyright (C) 2014 OpenWrt.org > > +# > > +# This is free software, licensed under the GNU General Public License v2. > > +# See /LICENSE for more information. > > +# > > + > > +define Profile/AIBR100 > > + NAME:=Aigale Ai-BR100 > > + PACKAGES:=\ > > + kmod-usb-core \ > > + kmod-usb-ohci \ > > + kmod-ledtrig-usbdev \ > > + kmod-usb2 > > +endef > > kmod-ledtrig-usbdev should be optional. > > > yousong
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index bd8c779..9c49c5c 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -27,6 +27,10 @@ case $board in 3g300m) set_usb_led "tenda:blue:3g" ;; + ai-br100) + ucidef_set_led_netdev "wan" "wan" "aigale:blue:wan" "eth0.2" + set_wifi_led "aigale:blue:wlan" + ;; a5-v11) ucidef_set_led_default "power" "POWER" "a5-v11:red:power" "1" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index b519cfd..80b5449 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -110,6 +110,7 @@ ramips_setup_interfaces() ;; 3g-6200n | \ + ai-br100 | \ dir-610-a1 | \ dir-300-b7 | \ dir-320-b1 | \ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index dfa5468..f50ae1f 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -12,6 +12,9 @@ get_status_led() { 3g300m | w150m) status_led="tenda:blue:ap" ;; + ai-br100) + status_led="aigale:blue:wlan" + ;; ar670w) status_led="ar670w:green:power" ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index ff5044c..b4e5d91 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -28,6 +28,9 @@ ramips_board_detect() { *"A5-V11") name="a5-v11" ;; + *"Aigale Ai-BR100") + name="ai-br100" + ;; *"Airlink101 AR670W") name="ar670w" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 4962b8b..991d3b5 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -19,6 +19,7 @@ platform_check_image() { 3g300m | \ a5-v11 | \ air3gii | \ + ai-br100 |\ all0239-3g | \ all0256n | \ all5002 | \ diff --git a/target/linux/ramips/dts/AIBR100.dts b/target/linux/ramips/dts/AIBR100.dts new file mode 100644 index 0000000..90f3a1e --- /dev/null +++ b/target/linux/ramips/dts/AIBR100.dts @@ -0,0 +1,106 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "AIBR100", "ralink,mt7620a-soc"; + model = "Aigale Ai-BR100"; + + palmbus@10000000 { + gpio2: gpio@660 { + status = "okay"; + }; + + gpio3: gpio@688 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "en25q64"; + reg = <0 0>; + linux,modalias = "m25p80", "en25q64"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + label = "u-boot-env"; + reg = <0x20000 0x10000>; + read-only; + }; + + factory: partition@30000 { + label = "factory"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "firmware"; + reg = <0x40000 0x7c0000>; + }; + }; + }; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + ralink,port-map = "llllw"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + gpio-leds { + compatible = "gpio-leds"; + wan { + label = "aigale:blue:wan"; + gpios = <&gpio2 4 1>; + }; + wlan { + label = "aigale:blue:wlan"; + gpios = <&gpio3 0 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 12 1>; + linux,code = <0x198>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index e0eb8c2..c5478ce 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -770,6 +770,8 @@ Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7 Image/Build/Profile/MT7620a_MT7610e=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e) Image/Build/Profile/MT7620a_MT7530=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7530,MT7620a_MT7530) Image/Build/Profile/MT7620a_V22SG=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_v22sg,MT7620a_V22SG) +br100_mtd_size=8126464 +Image/Build/Profile/AIBR100=$(call BuildFirmware/CustomFlash/$(1),$(1),ai-br100,AIBR100,$(br100_mtd_size),Ai-BR) Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N53) whr_300hp2_mtd_size=7012352 Image/Build/Profile/WHR300HP2=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-300hp2,WHR-300HP2,$(whr_300hp2_mtd_size)) @@ -799,6 +801,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/MT7620a_MT7610e,$(1)) $(call Image/Build/Profile/MT7620a_MT7530,$(1)) $(call Image/Build/Profile/MT7620a_V22SG,$(1)) + $(call Image/Build/Profile/AIBR100,$(1)) $(call Image/Build/Profile/RP-N53,$(1)) $(call Image/Build/Profile/DIR-810L,$(1)) $(call Image/Build/Profile/WHR300HP2,$(1)) diff --git a/target/linux/ramips/mt7620/profiles/aigale.mk b/target/linux/ramips/mt7620/profiles/aigale.mk new file mode 100644 index 0000000..e58ac43 --- /dev/null +++ b/target/linux/ramips/mt7620/profiles/aigale.mk @@ -0,0 +1,20 @@ +# +# Copyright (C) 2014 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/AIBR100 + NAME:=Aigale Ai-BR100 + PACKAGES:=\ + kmod-usb-core \ + kmod-usb-ohci \ + kmod-ledtrig-usbdev \ + kmod-usb2 +endef + +define Profile/AIBR100/Description + Default package set for Aigale Ai-BR100. +endef +$(eval $(call Profile,AIBR100))
Aigale Ai-BR100 is a router with mt7620a soc. There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led. Signed-off-by: 郭传鈜 <gch981213@gmail.com> --- target/linux/ramips/base-files/etc/board.d/01_leds | 4 + .../linux/ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/base-files/etc/diag.sh | 3 + target/linux/ramips/base-files/lib/ramips.sh | 3 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/AIBR100.dts | 106 +++++++++++++++++++++ target/linux/ramips/image/Makefile | 3 + target/linux/ramips/mt7620/profiles/aigale.mk | 20 ++++ 8 files changed, 141 insertions(+) create mode 100644 target/linux/ramips/dts/AIBR100.dts create mode 100644 target/linux/ramips/mt7620/profiles/aigale.mk