[1/1,WIP] package/swupdate: new package

This is mainly a draft based on Busybox package.
Just build tested with one x86 toolchain.

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Cc: Jeremy Rosen <jeremy.rosen@openwide.fr>
---
Note: The following patch was sent in order to build swupdate in Buildroot:
    http://patchwork.ozlabs.org/patch/386687/

 package/Config.in                                  |  1 +
 package/swupdate/Config.in                         | 41 ++++++++++
 ...wupdate-0001-Add-missing-header-for-off_t.patch | 25 ++++++
 package/swupdate/swupdate.config                   | 77 ++++++++++++++++++
 package/swupdate/swupdate.mk                       | 94 ++++++++++++++++++++++
 5 files changed, 238 insertions(+)
 create mode 100644 package/swupdate/Config.in
 create mode 100644 package/swupdate/swupdate-0001-Add-missing-header-for-off_t.patch
 create mode 100644 package/swupdate/swupdate.config
 create mode 100644 package/swupdate/swupdate.mk

Dear Romain Naour,

On Mo, 2014-10-20 at 23:47 +0200, Romain Naour wrote:
> This is mainly a draft based on Busybox package.
> Just build tested with one x86 toolchain.
> 

[snip]

I will check this package since we use it in one of our projects.

Best regards
Jörg Krause

Hi Jörg,

Le 26/10/2014 22:49, Jörg Krause a écrit :
> Dear Romain Naour,
> 
> On Mo, 2014-10-20 at 23:47 +0200, Romain Naour wrote:
>> This is mainly a draft based on Busybox package.
>> Just build tested with one x86 toolchain.
>>
> 
> [snip]
> 
> I will check this package since we use it in one of our projects.
> 

Great! I don't have the opportunity (yet) to fully test the software on hardware...

Best regards,

On 20/10/14 23:47, Romain Naour wrote:
> This is mainly a draft based on Busybox package.

 Busybox?

> Just build tested with one x86 toolchain.
> 
> Signed-off-by: Romain Naour <romain.naour@openwide.fr>
> Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>
> Cc: Jeremy Rosen <jeremy.rosen@openwide.fr>
> ---
> Note: The following patch was sent in order to build swupdate in Buildroot:
>     http://patchwork.ozlabs.org/patch/386687/

 Since that patch was applied a while ago, this comment is no longer necessary.

> 
>  package/Config.in                                  |  1 +
>  package/swupdate/Config.in                         | 41 ++++++++++
>  ...wupdate-0001-Add-missing-header-for-off_t.patch | 25 ++++++
>  package/swupdate/swupdate.config                   | 77 ++++++++++++++++++
>  package/swupdate/swupdate.mk                       | 94 ++++++++++++++++++++++
>  5 files changed, 238 insertions(+)
>  create mode 100644 package/swupdate/Config.in
>  create mode 100644 package/swupdate/swupdate-0001-Add-missing-header-for-off_t.patch
>  create mode 100644 package/swupdate/swupdate.config
>  create mode 100644 package/swupdate/swupdate.mk
> 
> diff --git a/package/Config.in b/package/Config.in
> index 89b46dc..8fccb25 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -370,6 +370,7 @@ endif
>  	source "package/sunxi-cedarx/Config.in"
>  	source "package/sunxi-mali/Config.in"
>  	source "package/sunxi-mali-prop/Config.in"
> +	source "package/swupdate/Config.in"

 I really don't think Hardware Handling is the right menu for this. Maybe System
tools?

>  	source "package/sysstat/Config.in"
>  	source "package/targetcli-fb/Config.in"
>  	source "package/ti-gfx/Config.in"
> diff --git a/package/swupdate/Config.in b/package/swupdate/Config.in
> new file mode 100644
> index 0000000..7edc75b
> --- /dev/null
> +++ b/package/swupdate/Config.in
> @@ -0,0 +1,41 @@
> +config BR2_PACKAGE_SWUPDATE
> +	select BR2_PACKAGE_ZLIB
> +	select BR2_PACKAGE_MTD
> +	# Probably needs some dependency

 uboot-tools as a runtime dependency?

> +	bool "swupdate"
> +	help
> +	  swupdate provides a reliable way to update the software on an embedded
> +	  system.
> +
> +	  https://github.com/sbabic/swupdate.git
> +
> +if BR2_PACKAGE_SWUPDATE
> +
> +config BR2_PACKAGE_SWUPDATE_CONFIG
> +	string "swupdate configuration file to use?"
> +	default "package/swupdate/swupdate.config"
> +	help
> +	  Some people may wish to use their own modified swupdate configuration
> +	  file, and will specify their config file location with this option.
> +
> +	  Most people will just use the default swupdate configuration file.
> +
> +config BR2_PACKAGE_SWUPDATE_LUA
> +	depends on BR2_PACKAGE_HAS_LUAINTERPRETER
> +	depends on !BR2_PACKAGE_LUA_5_1
> +	bool "Enable lua interpreter"
> +	help
> +	  Enable LUA interpreter.
> +
> +comment "swupdate needs a Lua 5.2 interpreter"
> +	depends on BR2_PACKAGE_LUA_5_1 || !BR2_PACKAGE_HAS_LUAINTERPRETER
> +
> +config BR2_PACKAGE_SWUPDATE_LIBCONFIG
> +	select BR2_PACKAGE_LIBCONFIG
> +	bool "Enable libconfig parser"
> +	default y
> +	help
> +	  Use libconfig to parse the configuration file.
> +	  This is the default parser.

 So, without libconfig it doesn't support a config file I guess?

> +
> +endif
> diff --git a/package/swupdate/swupdate-0001-Add-missing-header-for-off_t.patch b/package/swupdate/swupdate-0001-Add-missing-header-for-off_t.patch
> new file mode 100644
> index 0000000..4be0f7b
> --- /dev/null
> +++ b/package/swupdate/swupdate-0001-Add-missing-header-for-off_t.patch
> @@ -0,0 +1,25 @@
> +From 4e382373cad64ca7e183336e33b72c53cfeed340 Mon Sep 17 00:00:00 2001
> +From: Romain Naour <romain.naour@openwide.fr>
> +Date: Sun, 7 Sep 2014 17:31:09 +0200
> +Subject: [PATCH 1/1] Add missing header for off_t
> +
> +Signed-off-by: Romain Naour <romain.naour@openwide.fr>
> +---
> + include/swupdate.h | 1 +
> + 1 file changed, 1 insertion(+)
> +
> +diff --git a/include/swupdate.h b/include/swupdate.h
> +index 78b7f85..c193397 100644
> +--- a/include/swupdate.h
> ++++ b/include/swupdate.h
> +@@ -23,6 +23,7 @@
> + #ifndef _SWUPDATE_H
> + #define _SWUPDATE_H
> + 
> ++#include <sys/types.h>
> + #include <sys/queue.h>
> + #include "flash.h"
> + #include "globals.h"
> +-- 
> +1.9.3
> +
> diff --git a/package/swupdate/swupdate.config b/package/swupdate/swupdate.config
> new file mode 100644
> index 0000000..1787824
> --- /dev/null
> +++ b/package/swupdate/swupdate.config
> @@ -0,0 +1,77 @@
> +#
> +# Automatically generated make config: don't edit
> +# swupdate version: 2014.07.0
> +# Thu Sep  4 23:38:08 2014

 That's pretty long ago :-)

> +#
> +CONFIG_HAVE_DOT_CONFIG=y
> +
> +#
> +# Swupdate Settings
> +#
> +
> +#
> +# General Configuration
> +#
> +CONFIG_SCRIPTS=y
> +# CONFIG_HW_COMPATIBILITY is not set
> +CONFIG_HW_COMPATIBILITY_FILE=""
> +CONFIG_LUA=y
> +# CONFIG_FEATURE_SYSLOG is not set
> +
> +#
> +# Build Options
> +#
> +# CONFIG_STATIC is not set
> +CONFIG_CROSS_COMPILER_PREFIX=""
> +CONFIG_SYSROOT=""
> +CONFIG_EXTRA_CFLAGS=""
> +CONFIG_EXTRA_LDFLAGS=""
> +CONFIG_EXTRA_LDLIBS=""
> +
> +#
> +# Debugging Options
> +#
> +# CONFIG_DEBUG is not set
> +# CONFIG_DEBUG_PESSIMIZE is not set
> +# CONFIG_WERROR is not set
> +# CONFIG_NOCLEANUP is not set
> +CONFIG_WEBSERVER=y

 You're disabling it in the .mk file, so it doesn't make much sense to enable it
here.

> +
> +#
> +# Webserver Features
> +#
> +# CONFIG_MONGOOSE is not set
> +# CONFIG_MONGOOSELUA is not set
> +# CONFIG_MONGOOSESQL is not set
> +# CONFIG_MONGOOSEIPV6 is not set
> +# CONFIG_MONGOOSESSL is not set
> +
> +#
> +# Archival Features
> +#
> +CONFIG_CPIO=y
> +CONFIG_GUNZIP=y
> +
> +#
> +# Parser Features
> +#
> +CONFIG_LIBCONFIG=y
> +# CONFIG_LUAEXTERNAL is not set
> +# CONFIG_SETEXTPARSERNAME is not set
> +CONFIG_EXTPARSERNAME=""
> +# CONFIG_SETSWDESCRIPTION is not set
> +CONFIG_SWDESCRIPTION=""
> +
> +#
> +# Image Handlers
> +#
> +CONFIG_UBIVOL=y
> +CONFIG_UBIBLACKLIST=""
> +CONFIG_UBIVIDOFFSET=0
> +CONFIG_CFI=y
> +CONFIG_RAW=y
> +CONFIG_LUASCRIPTHANDLER=y
> +CONFIG_SHELLSCRIPTHANDLER=y
> +CONFIG_HANDLER_IN_LUA=y
> +# CONFIG_UBOOT is not set
> +CONFIG_UBOOT_FWENV=""
> diff --git a/package/swupdate/swupdate.mk b/package/swupdate/swupdate.mk
> new file mode 100644
> index 0000000..7e07245
> --- /dev/null
> +++ b/package/swupdate/swupdate.mk
> @@ -0,0 +1,94 @@
> +################################################################################
> +#
> +# swupdate
> +#
> +################################################################################
> +
> +SWUPDATE_VERSION = a4c94e334c4bdb0b95b8ea324a413abade93ed03
> +SWUPDATE_SITE = $(call github,sbabic,swupdate,$(SWUPDATE_VERSION))
> +SWUPDATE_LICENSE = GPLv2
> +SWUPDATE_LICENSE_FILES = COPYING
> +SWUPDATE_DEPENDENCIES = zlib mtd
> +
> +SWUPDATE_CFLAGS = \
> +	$(TARGET_CFLAGS)
> +
> +SWUPDATE_LDFLAGS = \
> +	$(TARGET_LDFLAGS)

 I think it's more appropriate to remove these definitions and instead add
TARGET_XXX directly in _MAKE_ENV.

 However, wouldn't it be better to pass these through the corresponding .config
values?


> +
> +SWUPDATE_BUILD_CONFIG = $(SWUPDATE_DIR)/.config
> +# Allows the build system to tweak CFLAGS
> +SWUPDATE_MAKE_ENV = \
> +	$(TARGET_MAKE_ENV) \
> +	CFLAGS="$(SWUPDATE_CFLAGS)" \
> +	LDFLAGS="$(SWUPDATE_LDFLAGS)"
> +
> +SWUPDATE_MAKE_OPTS = \
> +	CC="$(TARGET_CC)" \
> +	ARCH=$(KERNEL_ARCH) \
> +	PREFIX="$(TARGET_DIR)" \
> +	EXTRA_LDFLAGS="$(SWUPDATE_LDFLAGS)" \

 So you pass these twice?

> +	CROSS_COMPILE="$(TARGET_CROSS)" \
> +	CONFIG_PREFIX="$(TARGET_DIR)" \
> +	SKIP_STRIP=y
> +
> +ifndef SWUPDATE_CONFIG_FILE
> +	SWUPDATE_CONFIG_FILE = $(call qstrip,$(BR2_PACKAGE_SWUPDATE_CONFIG))
> +endif
> +
> +SWUPDATE_KCONFIG_FILE = $(SWUPDATE_CONFIG_FILE)

 What's the point of SWUPDATE_CONFIG_FILE? You can just set

SWUPDATE_KCONFIG_FILE = $(call qstrip,$(BR2_PACKAGE_SWUPDATE_CONFIG))

> +SWUPDATE_KCONFIG_EDITORS = menuconfig xconfig gconfig
> +SWUPDATE_KCONFIG_OPTS = $(SWUPDATE_MAKE_OPTS)
> +
> +ifeq ($(BR2_PACKAGE_SWUPDATE_LUA),y)
> +SWUPDATE_DEPENDENCIES += lua
> +define SWUPDATE_LUA
> +	$(call KCONFIG_ENABLE_OPT,CONFIG_LUA,$(SWUPDATE_BUILD_CONFIG))
> +endef
> +else
> +define SWUPDATE_LUA
> +	$(call KCONFIG_DISABLE_OPT,CONFIG_LUA,$(SWUPDATE_BUILD_CONFIG))
> +endef
> +endif
> +
> +# If we're using static libs do the same for swupdate
> +ifeq ($(BR2_PREFER_STATIC_LIB),y)
> +define SWUPDATE_PREFER_STATIC
> +	$(call KCONFIG_ENABLE_OPT,CONFIG_STATIC,$(SWUPDATE_BUILD_CONFIG))
> +endef
> +endif
> +
> +# Disable swupdate's version of mongoose.
> +# Use the Buildroot's mongoose package instead.
> +define SWUPDATE_WEBSERVER_MONGOOSE
> +	$(call KCONFIG_DISABLE_OPT,CONFIG_WEBSERVER,$(SWUPDATE_BUILD_CONFIG))
> +	$(call KCONFIG_DISABLE_OPT,CONFIG_MONGOOSE,$(SWUPDATE_BUILD_CONFIG))

 Doesn't swupdate use an embedded mongoose? I.e., doesn't it link with it?


 Regards,
 Arnout

> +endef
> +
> +ifeq ($(BR2_PACKAGE_SWUPDATE_LIBCONFIG),y)
> +SWUPDATE_DEPENDENCIES += libconfig
> +define SWUPDATE_LIBCONFIG_PARSER
> +	$(call KCONFIG_ENABLE_OPT,CONFIG_LIBCONFIG,$(SWUPDATE_BUILD_CONFIG))
> +endef
> +else
> +define SWUPDATE_LIBCONFIG_PARSER
> +	$(call KCONFIG_DISABLE_OPT,CONFIG_LIBCONFIG,$(SWUPDATE_BUILD_CONFIG))
> +endef
> +endif
> +
> +define SWUPDATE_KCONFIG_FIXUP_CMDS
> +	$(SWUPDATE_LUA)
> +	$(SWUPDATE_PREFER_STATIC)
> +	$(SWUPDATE_WEBSERVER_MONGOOSE)
> +	$(SWUPDATE_LIBCONFIG_PARSER)
> +endef
> +
> +define SWUPDATE_BUILD_CMDS
> +	$(SWUPDATE_MAKE_ENV) $(MAKE) $(SWUPDATE_MAKE_OPTS) -C $(@D)
> +endef
> +
> +define SWUPDATE_INSTALL_TARGET_CMDS
> +	$(INSTALL) -D -m 0755 $(@D)/swupdate $(TARGET_DIR)/usr/bin/swupdate
> +endef
> +
> +$(eval $(kconfig-package))
>