Message ID | 1396333730-10592-1-git-send-email-alexander.stein@systec-electronic.com |
---|---|
State | Superseded, archived |
Headers | show |
Any feedback in this? Regards, Alexander On Tuesday 01 April 2014 08:28:50, Alexander Stein wrote: > This drivers allows a fixed framebuffer memory to be set by an additional > IORESOURCE_MEM resource. Thus add an example to the DT documentation. > > Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> > --- > Actually I stumbled myself over this wondering how can I use this specific > feature. In the end I found it myself my coincidence. So it's best to add > this as an example for other people maybe not that experienced on > device-tree. > > Documentation/devicetree/bindings/video/atmel,lcdc.txt | 12 +++++++++++- > 1 file changed, 11 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt > index 1ec175e..92492b7 100644 > --- a/Documentation/devicetree/bindings/video/atmel,lcdc.txt > +++ b/Documentation/devicetree/bindings/video/atmel,lcdc.txt > @@ -10,7 +10,9 @@ Required properties: > "atmel,at91sam9g45es-lcdc" , > "atmel,at91sam9rl-lcdc" , > "atmel,at32ap-lcdc" > -- reg : Should contain 1 register ranges(address and length) > +- reg : Should contain 1 register ranges(address and length). > + Can contain an additional register range(address and length) > + for fixed framebuffer memory.Usefull for dedicated memories. > - interrupts : framebuffer controller interrupt > - display: a phandle pointing to the display node > > @@ -35,6 +37,14 @@ Example: > > }; > > +Example for fixed framebuffer memory: > + > + fb0: fb@0x00500000 { > + compatible = "atmel,at91sam9263-lcdc"; > + reg = <0x00700000 0x1000 0x70000000 0x200000>; > + [...] > + }; > + > Atmel LCDC Display > ----------------------------------------------------- > Required properties (as per of_videomode_helper): >
On 15/04/2014 16:57, Alexander Stein : > Any feedback in this? Actually I didn't notice it previously: thanks for the heads up. > Regards, > Alexander > > On Tuesday 01 April 2014 08:28:50, Alexander Stein wrote: >> This drivers allows a fixed framebuffer memory to be set by an additional >> IORESOURCE_MEM resource. Thus add an example to the DT documentation. >> >> Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Indeed, it can be useful: Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> >> --- >> Actually I stumbled myself over this wondering how can I use this specific >> feature. In the end I found it myself my coincidence. So it's best to add >> this as an example for other people maybe not that experienced on >> device-tree. >> >> Documentation/devicetree/bindings/video/atmel,lcdc.txt | 12 +++++++++++- >> 1 file changed, 11 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt >> index 1ec175e..92492b7 100644 >> --- a/Documentation/devicetree/bindings/video/atmel,lcdc.txt >> +++ b/Documentation/devicetree/bindings/video/atmel,lcdc.txt >> @@ -10,7 +10,9 @@ Required properties: >> "atmel,at91sam9g45es-lcdc" , >> "atmel,at91sam9rl-lcdc" , >> "atmel,at32ap-lcdc" >> -- reg : Should contain 1 register ranges(address and length) >> +- reg : Should contain 1 register ranges(address and length). >> + Can contain an additional register range(address and length) >> + for fixed framebuffer memory.Usefull for dedicated memories. >> - interrupts : framebuffer controller interrupt >> - display: a phandle pointing to the display node >> >> @@ -35,6 +37,14 @@ Example: >> >> }; >> >> +Example for fixed framebuffer memory: >> + >> + fb0: fb@0x00500000 { >> + compatible = "atmel,at91sam9263-lcdc"; >> + reg = <0x00700000 0x1000 0x70000000 0x200000>; >> + [...] >> + }; >> + >> Atmel LCDC Display >> ----------------------------------------------------- >> Required properties (as per of_videomode_helper): >> >
Will someone pick this up? It is laying around for 6 months now. Thanks and best regards, Alexander On Tuesday 15 April 2014 17:19:16, Nicolas Ferre wrote: > On 15/04/2014 16:57, Alexander Stein : > > Any feedback in this? > > Actually I didn't notice it previously: thanks for the heads up. > > > Regards, > > Alexander > > > > On Tuesday 01 April 2014 08:28:50, Alexander Stein wrote: > >> This drivers allows a fixed framebuffer memory to be set by an additional > >> IORESOURCE_MEM resource. Thus add an example to the DT documentation. > >> > >> Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> > > Indeed, it can be useful: > > Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> > > > >> --- > >> Actually I stumbled myself over this wondering how can I use this specific > >> feature. In the end I found it myself my coincidence. So it's best to add > >> this as an example for other people maybe not that experienced on > >> device-tree. > >> > >> Documentation/devicetree/bindings/video/atmel,lcdc.txt | 12 +++++++++++- > >> 1 file changed, 11 insertions(+), 1 deletion(-) > >> > >> diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt > >> index 1ec175e..92492b7 100644 > >> --- a/Documentation/devicetree/bindings/video/atmel,lcdc.txt > >> +++ b/Documentation/devicetree/bindings/video/atmel,lcdc.txt > >> @@ -10,7 +10,9 @@ Required properties: > >> "atmel,at91sam9g45es-lcdc" , > >> "atmel,at91sam9rl-lcdc" , > >> "atmel,at32ap-lcdc" > >> -- reg : Should contain 1 register ranges(address and length) > >> +- reg : Should contain 1 register ranges(address and length). > >> + Can contain an additional register range(address and length) > >> + for fixed framebuffer memory.Usefull for dedicated memories. > >> - interrupts : framebuffer controller interrupt > >> - display: a phandle pointing to the display node > >> > >> @@ -35,6 +37,14 @@ Example: > >> > >> }; > >> > >> +Example for fixed framebuffer memory: > >> + > >> + fb0: fb@0x00500000 { > >> + compatible = "atmel,at91sam9263-lcdc"; > >> + reg = <0x00700000 0x1000 0x70000000 0x200000>; > >> + [...] > >> + }; > >> + > >> Atmel LCDC Display > >> ----------------------------------------------------- > >> Required properties (as per of_videomode_helper): > >> > > > > >
diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt index 1ec175e..92492b7 100644 --- a/Documentation/devicetree/bindings/video/atmel,lcdc.txt +++ b/Documentation/devicetree/bindings/video/atmel,lcdc.txt @@ -10,7 +10,9 @@ Required properties: "atmel,at91sam9g45es-lcdc" , "atmel,at91sam9rl-lcdc" , "atmel,at32ap-lcdc" -- reg : Should contain 1 register ranges(address and length) +- reg : Should contain 1 register ranges(address and length). + Can contain an additional register range(address and length) + for fixed framebuffer memory.Usefull for dedicated memories. - interrupts : framebuffer controller interrupt - display: a phandle pointing to the display node @@ -35,6 +37,14 @@ Example: }; +Example for fixed framebuffer memory: + + fb0: fb@0x00500000 { + compatible = "atmel,at91sam9263-lcdc"; + reg = <0x00700000 0x1000 0x70000000 0x200000>; + [...] + }; + Atmel LCDC Display ----------------------------------------------------- Required properties (as per of_videomode_helper):
This drivers allows a fixed framebuffer memory to be set by an additional IORESOURCE_MEM resource. Thus add an example to the DT documentation. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> --- Actually I stumbled myself over this wondering how can I use this specific feature. In the end I found it myself my coincidence. So it's best to add this as an example for other people maybe not that experienced on device-tree. Documentation/devicetree/bindings/video/atmel,lcdc.txt | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)