| Message ID | 1383905510-31760-6-git-send-email-prabhakar.csengg@gmail.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
On 11/08/2013 12:11 PM, Prabhakar Lad wrote: > From: KV Sujith <sujithkv@ti.com> > > This patch adds OF parser support for davinci gpio > driver and also appropriate documentation in gpio-davinci.txt > located at Documentation/devicetree/bindings/gpio/. > > Signed-off-by: KV Sujith <sujithkv@ti.com> > Signed-off-by: Philip Avinash <avinashphilip@ti.com> > [prabhakar.csengg@gmail.com: simplified the OF code, removed > unnecessary DT property and also simplified > the commit message] > Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> > --- > .../devicetree/bindings/gpio/gpio-davinci.txt | 39 ++++++++++++++ > drivers/gpio/gpio-davinci.c | 54 ++++++++++++++++++-- > 2 files changed, 90 insertions(+), 3 deletions(-) > create mode 100644 Documentation/devicetree/bindings/gpio/gpio-davinci.txt > > diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt > new file mode 100644 > index 0000000..d677bbe > --- /dev/null > +++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt > @@ -0,0 +1,39 @@ > +Davinci GPIO controller bindings > + > +Required Properties: > +- compatible: should be "ti,dm6441-gpio" > + > +- reg: Physical base address of the controller and the size of memory mapped > + registers. > + > +- gpio-controller : Marks the device node as a gpio controller. > + > +- interrupt-parent: phandle of the parent interrupt controller. > + > +- interrupts: Array of GPIO interrupt number. Only banked or unbanked IRQs are > + supported at a time. > + > +- ti,ngpio: The number of GPIO pins supported. > + > +- ti,davinci-gpio-unbanked: The number of GPIOs that have an individual interrupt > + line to processor. > + > +The GPIO controller also acts as an interrupt controller. It uses the default > +two cells specifier as described in Documentation/devicetree/bindings/ > +interrupt-controller/interrupts.txt. > + > +Example: > + > +gpio: gpio@1e26000 { > + compatible = "ti,dm6441-gpio"; > + gpio-controller; > + reg = <0x226000 0x1000>; > + interrupt-parent = <&intc>; > + interrupts = <42 IRQ_TYPE_EDGE_BOTH 43 IRQ_TYPE_EDGE_BOTH > + 44 IRQ_TYPE_EDGE_BOTH 45 IRQ_TYPE_EDGE_BOTH > + 46 IRQ_TYPE_EDGE_BOTH 47 IRQ_TYPE_EDGE_BOTH > + 48 IRQ_TYPE_EDGE_BOTH 49 IRQ_TYPE_EDGE_BOTH > + 50 IRQ_TYPE_EDGE_BOTH>; > + ti,ngpio = <144>; > + ti,davinci-gpio-unbanked = <0>; > +}; > diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c > index b149239..ed04835 100644 > --- a/drivers/gpio/gpio-davinci.c > +++ b/drivers/gpio/gpio-davinci.c > @@ -17,6 +17,9 @@ > #include <linux/io.h> > #include <linux/irq.h> > #include <linux/irqdomain.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > #include <linux/platform_device.h> > #include <linux/platform_data/gpio-davinci.h> > > @@ -134,6 +137,40 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value) > writel((1 << offset), value ? &g->set_data : &g->clr_data); > } > > +static struct davinci_gpio_platform_data * > +davinci_gpio_get_pdata(struct platform_device *pdev) Minor: usually such functions have "_of" in their names: davinci_gpio_of_get_pdata() > +{ > + struct device_node *dn = pdev->dev.of_node; > + struct davinci_gpio_platform_data *pdata; > + int ret; > + u32 val; > + > + if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node) > + return pdev->dev.platform_data; > + > + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); > + if (!pdata) > + return NULL; > + > + ret = of_property_read_u32(dn, "ti,ngpio", &val); > + if (ret) > + goto of_err; > + > + pdata->ngpio = val; > + > + ret = of_property_read_u32(dn, "ti,davinci-gpio-unbanked", &val); > + if (ret) > + goto of_err; > + > + pdata->gpio_unbanked = val; > + > + return pdata; > + > +of_err: > + dev_err(&pdev->dev, "Populating pdata from DT failed: err %d\n", ret); > + return NULL; > +} > + > static int davinci_gpio_probe(struct platform_device *pdev) > { > int i, base; > @@ -144,12 +181,14 @@ static int davinci_gpio_probe(struct platform_device *pdev) > struct device *dev = &pdev->dev; > struct resource *res; > > - pdata = dev->platform_data; > + pdata = davinci_gpio_get_pdata(pdev); > if (!pdata) { > dev_err(dev, "No platform data found\n"); > return -EINVAL; > } > > + dev->platform_data = pdata; > + Pls, add following code to GPIO chip initialization: @@ -233,6 +245,9 @@ static int davinci_gpio_probe(struct platform_device *pdev) chips[i].chip.ngpio = ngpio - base; if (chips[i].chip.ngpio > 32) chips[i].chip.ngpio = 32; +#ifdef CONFIG_OF_GPIO + chips[i].chip.of_node = dev->of_node; +#endif > /* > * The gpio banks conceptually expose a segmented bitmap, > * and "ngpio" is one more than the largest zero-based > @@ -496,11 +535,20 @@ done: > return 0; > } > > +#if IS_ENABLED(CONFIG_OF) > +static const struct of_device_id davinci_gpio_ids[] = { > + { .compatible = "ti,dm6441-gpio", }, > + { /* sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(of, davinci_gpio_ids); > +#endif > + > static struct platform_driver davinci_gpio_driver = { > .probe = davinci_gpio_probe, > .driver = { > - .name = "davinci_gpio", > - .owner = THIS_MODULE, > + .name = "davinci_gpio", > + .owner = THIS_MODULE, > + .of_match_table = of_match_ptr(davinci_gpio_ids), > }, > }; > > Regards, - grygorii -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Grygorii, Thanks for the review. On Mon, Nov 11, 2013 at 8:48 PM, Grygorii Strashko <grygorii.strashko@ti.com> wrote: > On 11/08/2013 12:11 PM, Prabhakar Lad wrote: [Snip] >> @@ -134,6 +137,40 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value) >> writel((1 << offset), value ? &g->set_data : &g->clr_data); >> } >> >> +static struct davinci_gpio_platform_data * >> +davinci_gpio_get_pdata(struct platform_device *pdev) > > Minor: usually such functions have "_of" in their names: > davinci_gpio_of_get_pdata() > Ahh but actual this function is intended to get pdata in both the cases DT and NON-DT, so kept it generic :) >> +{ >> + struct device_node *dn = pdev->dev.of_node; >> + struct davinci_gpio_platform_data *pdata; >> + int ret; >> + u32 val; >> + >> + if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node) >> + return pdev->dev.platform_data; >> + >> + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); >> + if (!pdata) >> + return NULL; >> + >> + ret = of_property_read_u32(dn, "ti,ngpio", &val); >> + if (ret) >> + goto of_err; >> + >> + pdata->ngpio = val; >> + >> + ret = of_property_read_u32(dn, "ti,davinci-gpio-unbanked", &val); >> + if (ret) >> + goto of_err; >> + >> + pdata->gpio_unbanked = val; >> + >> + return pdata; >> + >> +of_err: >> + dev_err(&pdev->dev, "Populating pdata from DT failed: err %d\n", ret); >> + return NULL; >> +} >> + >> static int davinci_gpio_probe(struct platform_device *pdev) >> { >> int i, base; >> @@ -144,12 +181,14 @@ static int davinci_gpio_probe(struct platform_device *pdev) >> struct device *dev = &pdev->dev; >> struct resource *res; >> >> - pdata = dev->platform_data; >> + pdata = davinci_gpio_get_pdata(pdev); >> if (!pdata) { >> dev_err(dev, "No platform data found\n"); >> return -EINVAL; >> } >> >> + dev->platform_data = pdata; >> + > > Pls, add following code to GPIO chip initialization: > > @@ -233,6 +245,9 @@ static int davinci_gpio_probe(struct platform_device *pdev) > chips[i].chip.ngpio = ngpio - base; > if (chips[i].chip.ngpio > 32) > chips[i].chip.ngpio = 32; > +#ifdef CONFIG_OF_GPIO > + chips[i].chip.of_node = dev->of_node; > +#endif > > OK Regards, --Prabhakar Lad -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 11/11/2013 05:37 PM, Prabhakar Lad wrote: > Hi Grygorii, > > Thanks for the review. > > On Mon, Nov 11, 2013 at 8:48 PM, Grygorii Strashko > <grygorii.strashko@ti.com> wrote: >> On 11/08/2013 12:11 PM, Prabhakar Lad wrote: > [Snip] >>> @@ -134,6 +137,40 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value) >>> writel((1 << offset), value ? &g->set_data : &g->clr_data); >>> } >>> >>> +static struct davinci_gpio_platform_data * >>> +davinci_gpio_get_pdata(struct platform_device *pdev) >> >> Minor: usually such functions have "_of" in their names: >> davinci_gpio_of_get_pdata() >> > Ahh but actual this function is intended to get pdata in both the > cases DT and NON-DT, so kept it generic :) np > >>> +{ >>> + struct device_node *dn = pdev->dev.of_node; >>> + struct davinci_gpio_platform_data *pdata; >>> + int ret; >>> + u32 val; >>> + >>> + if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node) >>> + return pdev->dev.platform_data; >>> + >>> + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); >>> + if (!pdata) >>> + return NULL; >>> + >>> + ret = of_property_read_u32(dn, "ti,ngpio", &val); >>> + if (ret) >>> + goto of_err; >>> + >>> + pdata->ngpio = val; >>> + >>> + ret = of_property_read_u32(dn, "ti,davinci-gpio-unbanked", &val); >>> + if (ret) >>> + goto of_err; >>> + >>> + pdata->gpio_unbanked = val; >>> + >>> + return pdata; >>> + >>> +of_err: >>> + dev_err(&pdev->dev, "Populating pdata from DT failed: err %d\n", ret); >>> + return NULL; >>> +} >>> + >>> static int davinci_gpio_probe(struct platform_device *pdev) >>> { >>> int i, base; >>> @@ -144,12 +181,14 @@ static int davinci_gpio_probe(struct platform_device *pdev) >>> struct device *dev = &pdev->dev; >>> struct resource *res; >>> >>> - pdata = dev->platform_data; >>> + pdata = davinci_gpio_get_pdata(pdev); >>> if (!pdata) { >>> dev_err(dev, "No platform data found\n"); >>> return -EINVAL; >>> } >>> >>> + dev->platform_data = pdata; >>> + >> >> Pls, add following code to GPIO chip initialization: >> >> @@ -233,6 +245,9 @@ static int davinci_gpio_probe(struct platform_device *pdev) >> chips[i].chip.ngpio = ngpio - base; >> if (chips[i].chip.ngpio > 32) >> chips[i].chip.ngpio = 32; >> +#ifdef CONFIG_OF_GPIO >> + chips[i].chip.of_node = dev->of_node; >> +#endif >> >> > OK > > Regards, > --Prabhakar Lad > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Nov 8, 2013 at 11:11 AM, Prabhakar Lad <prabhakar.csengg@gmail.com> wrote: > From: KV Sujith <sujithkv@ti.com> > > This patch adds OF parser support for davinci gpio > driver and also appropriate documentation in gpio-davinci.txt > located at Documentation/devicetree/bindings/gpio/. > > Signed-off-by: KV Sujith <sujithkv@ti.com> > Signed-off-by: Philip Avinash <avinashphilip@ti.com> > [prabhakar.csengg@gmail.com: simplified the OF code, removed > unnecessary DT property and also simplified > the commit message] > Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> I like this patch now! Acked-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Nov 8, 2013 at 4:11 AM, Prabhakar Lad <prabhakar.csengg@gmail.com> wrote: > From: KV Sujith <sujithkv@ti.com> > > This patch adds OF parser support for davinci gpio > driver and also appropriate documentation in gpio-davinci.txt > located at Documentation/devicetree/bindings/gpio/. > > Signed-off-by: KV Sujith <sujithkv@ti.com> > Signed-off-by: Philip Avinash <avinashphilip@ti.com> > [prabhakar.csengg@gmail.com: simplified the OF code, removed > unnecessary DT property and also simplified > the commit message] > Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> You should add the interrupt-controller and #interrupt-cells properties to the example. Otherwise: Acked-by: Rob Herring <rob.herring@calxeda.com> > --- > .../devicetree/bindings/gpio/gpio-davinci.txt | 39 ++++++++++++++ > drivers/gpio/gpio-davinci.c | 54 ++++++++++++++++++-- > 2 files changed, 90 insertions(+), 3 deletions(-) > create mode 100644 Documentation/devicetree/bindings/gpio/gpio-davinci.txt > > diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt > new file mode 100644 > index 0000000..d677bbe > --- /dev/null > +++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt > @@ -0,0 +1,39 @@ > +Davinci GPIO controller bindings > + > +Required Properties: > +- compatible: should be "ti,dm6441-gpio" > + > +- reg: Physical base address of the controller and the size of memory mapped > + registers. > + > +- gpio-controller : Marks the device node as a gpio controller. > + > +- interrupt-parent: phandle of the parent interrupt controller. > + > +- interrupts: Array of GPIO interrupt number. Only banked or unbanked IRQs are > + supported at a time. > + > +- ti,ngpio: The number of GPIO pins supported. > + > +- ti,davinci-gpio-unbanked: The number of GPIOs that have an individual interrupt > + line to processor. > + > +The GPIO controller also acts as an interrupt controller. It uses the default > +two cells specifier as described in Documentation/devicetree/bindings/ > +interrupt-controller/interrupts.txt. > + > +Example: > + > +gpio: gpio@1e26000 { > + compatible = "ti,dm6441-gpio"; > + gpio-controller; > + reg = <0x226000 0x1000>; > + interrupt-parent = <&intc>; > + interrupts = <42 IRQ_TYPE_EDGE_BOTH 43 IRQ_TYPE_EDGE_BOTH > + 44 IRQ_TYPE_EDGE_BOTH 45 IRQ_TYPE_EDGE_BOTH > + 46 IRQ_TYPE_EDGE_BOTH 47 IRQ_TYPE_EDGE_BOTH > + 48 IRQ_TYPE_EDGE_BOTH 49 IRQ_TYPE_EDGE_BOTH > + 50 IRQ_TYPE_EDGE_BOTH>; > + ti,ngpio = <144>; > + ti,davinci-gpio-unbanked = <0>; > +}; > diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c > index b149239..ed04835 100644 > --- a/drivers/gpio/gpio-davinci.c > +++ b/drivers/gpio/gpio-davinci.c > @@ -17,6 +17,9 @@ > #include <linux/io.h> > #include <linux/irq.h> > #include <linux/irqdomain.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > #include <linux/platform_device.h> > #include <linux/platform_data/gpio-davinci.h> > > @@ -134,6 +137,40 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value) > writel((1 << offset), value ? &g->set_data : &g->clr_data); > } > > +static struct davinci_gpio_platform_data * > +davinci_gpio_get_pdata(struct platform_device *pdev) > +{ > + struct device_node *dn = pdev->dev.of_node; > + struct davinci_gpio_platform_data *pdata; > + int ret; > + u32 val; > + > + if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node) > + return pdev->dev.platform_data; > + > + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); > + if (!pdata) > + return NULL; > + > + ret = of_property_read_u32(dn, "ti,ngpio", &val); > + if (ret) > + goto of_err; > + > + pdata->ngpio = val; > + > + ret = of_property_read_u32(dn, "ti,davinci-gpio-unbanked", &val); > + if (ret) > + goto of_err; > + > + pdata->gpio_unbanked = val; > + > + return pdata; > + > +of_err: > + dev_err(&pdev->dev, "Populating pdata from DT failed: err %d\n", ret); > + return NULL; > +} > + > static int davinci_gpio_probe(struct platform_device *pdev) > { > int i, base; > @@ -144,12 +181,14 @@ static int davinci_gpio_probe(struct platform_device *pdev) > struct device *dev = &pdev->dev; > struct resource *res; > > - pdata = dev->platform_data; > + pdata = davinci_gpio_get_pdata(pdev); > if (!pdata) { > dev_err(dev, "No platform data found\n"); > return -EINVAL; > } > > + dev->platform_data = pdata; > + > /* > * The gpio banks conceptually expose a segmented bitmap, > * and "ngpio" is one more than the largest zero-based > @@ -496,11 +535,20 @@ done: > return 0; > } > > +#if IS_ENABLED(CONFIG_OF) > +static const struct of_device_id davinci_gpio_ids[] = { > + { .compatible = "ti,dm6441-gpio", }, > + { /* sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(of, davinci_gpio_ids); > +#endif > + > static struct platform_driver davinci_gpio_driver = { > .probe = davinci_gpio_probe, > .driver = { > - .name = "davinci_gpio", > - .owner = THIS_MODULE, > + .name = "davinci_gpio", > + .owner = THIS_MODULE, > + .of_match_table = of_match_ptr(davinci_gpio_ids), > }, > }; > > -- > 1.7.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt new file mode 100644 index 0000000..d677bbe --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt @@ -0,0 +1,39 @@ +Davinci GPIO controller bindings + +Required Properties: +- compatible: should be "ti,dm6441-gpio" + +- reg: Physical base address of the controller and the size of memory mapped + registers. + +- gpio-controller : Marks the device node as a gpio controller. + +- interrupt-parent: phandle of the parent interrupt controller. + +- interrupts: Array of GPIO interrupt number. Only banked or unbanked IRQs are + supported at a time. + +- ti,ngpio: The number of GPIO pins supported. + +- ti,davinci-gpio-unbanked: The number of GPIOs that have an individual interrupt + line to processor. + +The GPIO controller also acts as an interrupt controller. It uses the default +two cells specifier as described in Documentation/devicetree/bindings/ +interrupt-controller/interrupts.txt. + +Example: + +gpio: gpio@1e26000 { + compatible = "ti,dm6441-gpio"; + gpio-controller; + reg = <0x226000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <42 IRQ_TYPE_EDGE_BOTH 43 IRQ_TYPE_EDGE_BOTH + 44 IRQ_TYPE_EDGE_BOTH 45 IRQ_TYPE_EDGE_BOTH + 46 IRQ_TYPE_EDGE_BOTH 47 IRQ_TYPE_EDGE_BOTH + 48 IRQ_TYPE_EDGE_BOTH 49 IRQ_TYPE_EDGE_BOTH + 50 IRQ_TYPE_EDGE_BOTH>; + ti,ngpio = <144>; + ti,davinci-gpio-unbanked = <0>; +}; diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c index b149239..ed04835 100644 --- a/drivers/gpio/gpio-davinci.c +++ b/drivers/gpio/gpio-davinci.c @@ -17,6 +17,9 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/irqdomain.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/platform_data/gpio-davinci.h> @@ -134,6 +137,40 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value) writel((1 << offset), value ? &g->set_data : &g->clr_data); } +static struct davinci_gpio_platform_data * +davinci_gpio_get_pdata(struct platform_device *pdev) +{ + struct device_node *dn = pdev->dev.of_node; + struct davinci_gpio_platform_data *pdata; + int ret; + u32 val; + + if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node) + return pdev->dev.platform_data; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + ret = of_property_read_u32(dn, "ti,ngpio", &val); + if (ret) + goto of_err; + + pdata->ngpio = val; + + ret = of_property_read_u32(dn, "ti,davinci-gpio-unbanked", &val); + if (ret) + goto of_err; + + pdata->gpio_unbanked = val; + + return pdata; + +of_err: + dev_err(&pdev->dev, "Populating pdata from DT failed: err %d\n", ret); + return NULL; +} + static int davinci_gpio_probe(struct platform_device *pdev) { int i, base; @@ -144,12 +181,14 @@ static int davinci_gpio_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct resource *res; - pdata = dev->platform_data; + pdata = davinci_gpio_get_pdata(pdev); if (!pdata) { dev_err(dev, "No platform data found\n"); return -EINVAL; } + dev->platform_data = pdata; + /* * The gpio banks conceptually expose a segmented bitmap, * and "ngpio" is one more than the largest zero-based @@ -496,11 +535,20 @@ done: return 0; } +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id davinci_gpio_ids[] = { + { .compatible = "ti,dm6441-gpio", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, davinci_gpio_ids); +#endif + static struct platform_driver davinci_gpio_driver = { .probe = davinci_gpio_probe, .driver = { - .name = "davinci_gpio", - .owner = THIS_MODULE, + .name = "davinci_gpio", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(davinci_gpio_ids), }, };