| Message ID | 1383813691-31587-2-git-send-email-haojian.zhuang@linaro.org |
|---|---|
| State | Superseded, archived |
| Headers | show |
On 11/7/13 2:41 AM, Haojian Zhuang wrote: > Add board support with device tree for Hisilicon Hi3620 SoC platform. > > Changelog: > v11: > 1. Add comments for iotable. > > v10: > 1. Add .map_io() & debug_ll_io_init() back. Since debug_ll_io_init() is > only called if .map_io() isn't assigned. Use .map_io() to setup static > IO mapping that is used in clock driver. > > v3: > 1. Remove .map_io() in DT machine descriptor. Since debug_ll_io_init() > is called by default. > 2. Remove .init_machine() in DT machine descriptor. Since > of_platform_populate() is called by default in DT mode. > > v2: > 1. Remove .init_irq() in DT machine descriptor. Since irqchip_init() > is called by default in DT mode. > > Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> > --- > .../bindings/arm/hisilicon/hisilicon.txt | 10 ++++ > arch/arm/Kconfig | 2 + > arch/arm/Makefile | 1 + > arch/arm/mach-hi3xxx/Kconfig | 12 +++++ > arch/arm/mach-hi3xxx/Makefile | 5 ++ > arch/arm/mach-hi3xxx/hi3xxx.c | 60 ++++++++++++++++++++++ > 6 files changed, 90 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > create mode 100644 arch/arm/mach-hi3xxx/Kconfig > create mode 100644 arch/arm/mach-hi3xxx/Makefile > create mode 100644 arch/arm/mach-hi3xxx/hi3xxx.c > > diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > new file mode 100644 > index 0000000..3be60c8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > @@ -0,0 +1,10 @@ > +Hisilicon Platforms Device Tree Bindings > +---------------------------------------------------- > + > +Hi3716 Development Board > +Required root node properties: > + - compatible = "hisilicon,hi3716-dkb"; > + > +Hi4511 Board > +Required root node properties: > + - compatible = "hisilicon,hi3620-hi4511"; > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index 3f7714d..0118443 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -946,6 +946,8 @@ source "arch/arm/mach-footbridge/Kconfig" > > source "arch/arm/mach-gemini/Kconfig" > > +source "arch/arm/mach-hi3xxx/Kconfig" > + > source "arch/arm/mach-highbank/Kconfig" > > source "arch/arm/mach-integrator/Kconfig" > diff --git a/arch/arm/Makefile b/arch/arm/Makefile > index a37a50f..23fb0b0 100644 > --- a/arch/arm/Makefile > +++ b/arch/arm/Makefile > @@ -155,6 +155,7 @@ machine-$(CONFIG_ARCH_EBSA110) += ebsa110 > machine-$(CONFIG_ARCH_EP93XX) += ep93xx > machine-$(CONFIG_ARCH_EXYNOS) += exynos > machine-$(CONFIG_ARCH_GEMINI) += gemini > +machine-$(CONFIG_ARCH_HI3xxx) += hi3xxx > machine-$(CONFIG_ARCH_HIGHBANK) += highbank > machine-$(CONFIG_ARCH_INTEGRATOR) += integrator > machine-$(CONFIG_ARCH_IOP13XX) += iop13xx > diff --git a/arch/arm/mach-hi3xxx/Kconfig b/arch/arm/mach-hi3xxx/Kconfig > new file mode 100644 > index 0000000..68bd26c > --- /dev/null > +++ b/arch/arm/mach-hi3xxx/Kconfig > @@ -0,0 +1,12 @@ > +config ARCH_HI3xxx > + bool "Hisilicon Hi36xx/Hi37xx family" if ARCH_MULTI_V7 > + select ARM_AMBA > + select ARM_GIC > + select ARM_TIMER_SP804 > + select CACHE_L2X0 > + select CLKSRC_OF I think you need COMMON_CLK here. > + select GENERIC_CLOCKEVENTS > + select PINCTRL > + select PINCTRL_SINGLE > + help > + Support for Hisilicon Hi36xx/Hi37xx processor family > diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile > new file mode 100644 > index 0000000..d68ebb3 > --- /dev/null > +++ b/arch/arm/mach-hi3xxx/Makefile > @@ -0,0 +1,5 @@ > +# > +# Makefile for Hisilicon Hi36xx/Hi37xx processors line > +# > + > +obj-y += hi3xxx.o > diff --git a/arch/arm/mach-hi3xxx/hi3xxx.c b/arch/arm/mach-hi3xxx/hi3xxx.c > new file mode 100644 > index 0000000..925af13 > --- /dev/null > +++ b/arch/arm/mach-hi3xxx/hi3xxx.c > @@ -0,0 +1,60 @@ > +/* > + * (Hisilicon's Hi36xx/Hi37xx SoC based) flattened device tree enabled machine > + * > + * Copyright (c) 2012-2013 Hisilicon Ltd. > + * Copyright (c) 2012-2013 Linaro Ltd. > + * > + * Author: Haojian Zhuang <haojian.zhuang@linaro.org> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include <linux/clk-provider.h> > +#include <linux/clocksource.h> > +#include <linux/irqchip.h> > +#include <linux/of_platform.h> > + > +#include <asm/mach/arch.h> > +#include <asm/mach/map.h> > + > +/* > + * This table is only for optimization. Since ioremap() could always share > + * the same mapping if it's defined as static IO mapping. > + * > + * Without this table, system could also work. The cost is some virtual address > + * spaces wasted since ioremap() may be called multi times for the same > + * IO space. > + */ > +static struct map_desc hi3620_io_desc[] __initdata = { > + { > + .pfn = __phys_to_pfn(0xfc802000), > + .virtual = 0xfe802000, > + .length = 0x1000, > + .type = MT_DEVICE, > + }, > +}; > + > +static void __init hi3620_map_io(void) > +{ > + debug_ll_io_init(); > + iotable_init(hi3620_io_desc, ARRAY_SIZE(hi3620_io_desc)); > +} > + > +static void __init hi3xxx_timer_init(void) > +{ > + of_clk_init(NULL); > + clocksource_of_init(); > +} Once you have COMMON_CLK, then this function can go away. > + > +static const char *hi3xxx_compat[] __initdata = { > + "hisilicon,hi3620-hi4511", > + NULL, > +}; > + > +DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)") > + .map_io = hi3620_map_io, > + .init_time = hi3xxx_timer_init, .init_time can go away if you have COMMON_CLK. Dinh > + .dt_compat = hi3xxx_compat, > +MACHINE_END -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 7 November 2013 17:50, Dinh Nguyen <dinh.linux@gmail.com> wrote: > > On 11/7/13 2:41 AM, Haojian Zhuang wrote: >> Add board support with device tree for Hisilicon Hi3620 SoC platform. >> >> Changelog: >> v11: >> 1. Add comments for iotable. >> >> v10: >> 1. Add .map_io() & debug_ll_io_init() back. Since debug_ll_io_init() is >> only called if .map_io() isn't assigned. Use .map_io() to setup static >> IO mapping that is used in clock driver. >> >> v3: >> 1. Remove .map_io() in DT machine descriptor. Since debug_ll_io_init() >> is called by default. >> 2. Remove .init_machine() in DT machine descriptor. Since >> of_platform_populate() is called by default in DT mode. >> >> v2: >> 1. Remove .init_irq() in DT machine descriptor. Since irqchip_init() >> is called by default in DT mode. >> >> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> >> --- >> .../bindings/arm/hisilicon/hisilicon.txt | 10 ++++ >> arch/arm/Kconfig | 2 + >> arch/arm/Makefile | 1 + >> arch/arm/mach-hi3xxx/Kconfig | 12 +++++ >> arch/arm/mach-hi3xxx/Makefile | 5 ++ >> arch/arm/mach-hi3xxx/hi3xxx.c | 60 ++++++++++++++++++++++ >> 6 files changed, 90 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >> create mode 100644 arch/arm/mach-hi3xxx/Kconfig >> create mode 100644 arch/arm/mach-hi3xxx/Makefile >> create mode 100644 arch/arm/mach-hi3xxx/hi3xxx.c >> >> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >> new file mode 100644 >> index 0000000..3be60c8 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >> @@ -0,0 +1,10 @@ >> +Hisilicon Platforms Device Tree Bindings >> +---------------------------------------------------- >> + >> +Hi3716 Development Board >> +Required root node properties: >> + - compatible = "hisilicon,hi3716-dkb"; >> + >> +Hi4511 Board >> +Required root node properties: >> + - compatible = "hisilicon,hi3620-hi4511"; >> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig >> index 3f7714d..0118443 100644 >> --- a/arch/arm/Kconfig >> +++ b/arch/arm/Kconfig >> @@ -946,6 +946,8 @@ source "arch/arm/mach-footbridge/Kconfig" >> >> source "arch/arm/mach-gemini/Kconfig" >> >> +source "arch/arm/mach-hi3xxx/Kconfig" >> + >> source "arch/arm/mach-highbank/Kconfig" >> >> source "arch/arm/mach-integrator/Kconfig" >> diff --git a/arch/arm/Makefile b/arch/arm/Makefile >> index a37a50f..23fb0b0 100644 >> --- a/arch/arm/Makefile >> +++ b/arch/arm/Makefile >> @@ -155,6 +155,7 @@ machine-$(CONFIG_ARCH_EBSA110) += ebsa110 >> machine-$(CONFIG_ARCH_EP93XX) += ep93xx >> machine-$(CONFIG_ARCH_EXYNOS) += exynos >> machine-$(CONFIG_ARCH_GEMINI) += gemini >> +machine-$(CONFIG_ARCH_HI3xxx) += hi3xxx >> machine-$(CONFIG_ARCH_HIGHBANK) += highbank >> machine-$(CONFIG_ARCH_INTEGRATOR) += integrator >> machine-$(CONFIG_ARCH_IOP13XX) += iop13xx >> diff --git a/arch/arm/mach-hi3xxx/Kconfig b/arch/arm/mach-hi3xxx/Kconfig >> new file mode 100644 >> index 0000000..68bd26c >> --- /dev/null >> +++ b/arch/arm/mach-hi3xxx/Kconfig >> @@ -0,0 +1,12 @@ >> +config ARCH_HI3xxx >> + bool "Hisilicon Hi36xx/Hi37xx family" if ARCH_MULTI_V7 >> + select ARM_AMBA >> + select ARM_GIC >> + select ARM_TIMER_SP804 >> + select CACHE_L2X0 >> + select CLKSRC_OF > I think you need COMMON_CLK here. Why? COMMON_CLK will be selected if ARCH_MULTIPLATFORM is enabled. Why do I need to choose it again? >> + select GENERIC_CLOCKEVENTS >> + select PINCTRL >> + select PINCTRL_SINGLE >> + help >> + Support for Hisilicon Hi36xx/Hi37xx processor family >> diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile >> new file mode 100644 >> index 0000000..d68ebb3 >> --- /dev/null >> +++ b/arch/arm/mach-hi3xxx/Makefile >> @@ -0,0 +1,5 @@ >> +# >> +# Makefile for Hisilicon Hi36xx/Hi37xx processors line >> +# >> + >> +obj-y += hi3xxx.o >> diff --git a/arch/arm/mach-hi3xxx/hi3xxx.c b/arch/arm/mach-hi3xxx/hi3xxx.c >> new file mode 100644 >> index 0000000..925af13 >> --- /dev/null >> +++ b/arch/arm/mach-hi3xxx/hi3xxx.c >> @@ -0,0 +1,60 @@ >> +/* >> + * (Hisilicon's Hi36xx/Hi37xx SoC based) flattened device tree enabled machine >> + * >> + * Copyright (c) 2012-2013 Hisilicon Ltd. >> + * Copyright (c) 2012-2013 Linaro Ltd. >> + * >> + * Author: Haojian Zhuang <haojian.zhuang@linaro.org> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> +*/ >> + >> +#include <linux/clk-provider.h> >> +#include <linux/clocksource.h> >> +#include <linux/irqchip.h> >> +#include <linux/of_platform.h> >> + >> +#include <asm/mach/arch.h> >> +#include <asm/mach/map.h> >> + >> +/* >> + * This table is only for optimization. Since ioremap() could always share >> + * the same mapping if it's defined as static IO mapping. >> + * >> + * Without this table, system could also work. The cost is some virtual address >> + * spaces wasted since ioremap() may be called multi times for the same >> + * IO space. >> + */ >> +static struct map_desc hi3620_io_desc[] __initdata = { >> + { >> + .pfn = __phys_to_pfn(0xfc802000), >> + .virtual = 0xfe802000, >> + .length = 0x1000, >> + .type = MT_DEVICE, >> + }, >> +}; >> + >> +static void __init hi3620_map_io(void) >> +{ >> + debug_ll_io_init(); >> + iotable_init(hi3620_io_desc, ARRAY_SIZE(hi3620_io_desc)); >> +} >> + >> +static void __init hi3xxx_timer_init(void) >> +{ >> + of_clk_init(NULL); >> + clocksource_of_init(); >> +} > Once you have COMMON_CLK, then this function can go away. On v3.12-rcx, of_clk_init() must be called by platform driver. Now v3.13-rcx doesn't announce yet. This function will be removed in additional patch, not in this patch. >> + >> +static const char *hi3xxx_compat[] __initdata = { >> + "hisilicon,hi3620-hi4511", >> + NULL, >> +}; >> + >> +DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)") >> + .map_io = hi3620_map_io, >> + .init_time = hi3xxx_timer_init, > .init_time can go away if you have COMMON_CLK. > > Dinh >> + .dt_compat = hi3xxx_compat, >> +MACHINE_END > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt new file mode 100644 index 0000000..3be60c8 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -0,0 +1,10 @@ +Hisilicon Platforms Device Tree Bindings +---------------------------------------------------- + +Hi3716 Development Board +Required root node properties: + - compatible = "hisilicon,hi3716-dkb"; + +Hi4511 Board +Required root node properties: + - compatible = "hisilicon,hi3620-hi4511"; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3f7714d..0118443 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -946,6 +946,8 @@ source "arch/arm/mach-footbridge/Kconfig" source "arch/arm/mach-gemini/Kconfig" +source "arch/arm/mach-hi3xxx/Kconfig" + source "arch/arm/mach-highbank/Kconfig" source "arch/arm/mach-integrator/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index a37a50f..23fb0b0 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -155,6 +155,7 @@ machine-$(CONFIG_ARCH_EBSA110) += ebsa110 machine-$(CONFIG_ARCH_EP93XX) += ep93xx machine-$(CONFIG_ARCH_EXYNOS) += exynos machine-$(CONFIG_ARCH_GEMINI) += gemini +machine-$(CONFIG_ARCH_HI3xxx) += hi3xxx machine-$(CONFIG_ARCH_HIGHBANK) += highbank machine-$(CONFIG_ARCH_INTEGRATOR) += integrator machine-$(CONFIG_ARCH_IOP13XX) += iop13xx diff --git a/arch/arm/mach-hi3xxx/Kconfig b/arch/arm/mach-hi3xxx/Kconfig new file mode 100644 index 0000000..68bd26c --- /dev/null +++ b/arch/arm/mach-hi3xxx/Kconfig @@ -0,0 +1,12 @@ +config ARCH_HI3xxx + bool "Hisilicon Hi36xx/Hi37xx family" if ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_TIMER_SP804 + select CACHE_L2X0 + select CLKSRC_OF + select GENERIC_CLOCKEVENTS + select PINCTRL + select PINCTRL_SINGLE + help + Support for Hisilicon Hi36xx/Hi37xx processor family diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile new file mode 100644 index 0000000..d68ebb3 --- /dev/null +++ b/arch/arm/mach-hi3xxx/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for Hisilicon Hi36xx/Hi37xx processors line +# + +obj-y += hi3xxx.o diff --git a/arch/arm/mach-hi3xxx/hi3xxx.c b/arch/arm/mach-hi3xxx/hi3xxx.c new file mode 100644 index 0000000..925af13 --- /dev/null +++ b/arch/arm/mach-hi3xxx/hi3xxx.c @@ -0,0 +1,60 @@ +/* + * (Hisilicon's Hi36xx/Hi37xx SoC based) flattened device tree enabled machine + * + * Copyright (c) 2012-2013 Hisilicon Ltd. + * Copyright (c) 2012-2013 Linaro Ltd. + * + * Author: Haojian Zhuang <haojian.zhuang@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/clk-provider.h> +#include <linux/clocksource.h> +#include <linux/irqchip.h> +#include <linux/of_platform.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +/* + * This table is only for optimization. Since ioremap() could always share + * the same mapping if it's defined as static IO mapping. + * + * Without this table, system could also work. The cost is some virtual address + * spaces wasted since ioremap() may be called multi times for the same + * IO space. + */ +static struct map_desc hi3620_io_desc[] __initdata = { + { + .pfn = __phys_to_pfn(0xfc802000), + .virtual = 0xfe802000, + .length = 0x1000, + .type = MT_DEVICE, + }, +}; + +static void __init hi3620_map_io(void) +{ + debug_ll_io_init(); + iotable_init(hi3620_io_desc, ARRAY_SIZE(hi3620_io_desc)); +} + +static void __init hi3xxx_timer_init(void) +{ + of_clk_init(NULL); + clocksource_of_init(); +} + +static const char *hi3xxx_compat[] __initdata = { + "hisilicon,hi3620-hi4511", + NULL, +}; + +DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)") + .map_io = hi3620_map_io, + .init_time = hi3xxx_timer_init, + .dt_compat = hi3xxx_compat, +MACHINE_END
Add board support with device tree for Hisilicon Hi3620 SoC platform. Changelog: v11: 1. Add comments for iotable. v10: 1. Add .map_io() & debug_ll_io_init() back. Since debug_ll_io_init() is only called if .map_io() isn't assigned. Use .map_io() to setup static IO mapping that is used in clock driver. v3: 1. Remove .map_io() in DT machine descriptor. Since debug_ll_io_init() is called by default. 2. Remove .init_machine() in DT machine descriptor. Since of_platform_populate() is called by default in DT mode. v2: 1. Remove .init_irq() in DT machine descriptor. Since irqchip_init() is called by default in DT mode. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> --- .../bindings/arm/hisilicon/hisilicon.txt | 10 ++++ arch/arm/Kconfig | 2 + arch/arm/Makefile | 1 + arch/arm/mach-hi3xxx/Kconfig | 12 +++++ arch/arm/mach-hi3xxx/Makefile | 5 ++ arch/arm/mach-hi3xxx/hi3xxx.c | 60 ++++++++++++++++++++++ 6 files changed, 90 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt create mode 100644 arch/arm/mach-hi3xxx/Kconfig create mode 100644 arch/arm/mach-hi3xxx/Makefile create mode 100644 arch/arm/mach-hi3xxx/hi3xxx.c