| Message ID | 1236292120-32050-1-git-send-email-brian.haley@hp.com |
|---|---|
| State | Accepted, archived |
| Delegated to: | David Miller |
| Headers | show |
Brian Haley wrote: > Fix the behavior of allowing both sysctl and addrconf_dad_failure() > to set the disable_ipv6 parameter without any bad side-effects. > If DAD fails and accept_dad > 1, we will still set disable_ipv6=1, > but then instead of allowing an RA to add an address then > immediately fail DAD, we simply don't allow the address to be > added in the first place. This also lets the user set this flag > and disable all IPv6 addresses on the interface, or on the entire > system. So I haven't seen an Ack/Nack for this patch, and the patchwork queue has shrunk to just a handful in the past few hours :) -Brian -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
From: Brian Haley <brian.haley@hp.com> Date: Fri, 13 Mar 2009 20:52:40 -0400 > Brian Haley wrote: > > Fix the behavior of allowing both sysctl and addrconf_dad_failure() > > to set the disable_ipv6 parameter without any bad side-effects. > > If DAD fails and accept_dad > 1, we will still set disable_ipv6=1, > > but then instead of allowing an RA to add an address then > > immediately fail DAD, we simply don't allow the address to be > > added in the first place. This also lets the user set this flag > > and disable all IPv6 addresses on the interface, or on the entire > > system. > > So I haven't seen an Ack/Nack for this patch, and the patchwork queue has shrunk > to just a handful in the past few hours :) It's near the top of my queue, I'm just debating what tree to stick it into. Probably I'll put it into net-next-2.6 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
From: Brian Haley <brian.haley@hp.com> Date: Thu, 5 Mar 2009 17:28:40 -0500 > Fix the behavior of allowing both sysctl and addrconf_dad_failure() > to set the disable_ipv6 parameter without any bad side-effects. > If DAD fails and accept_dad > 1, we will still set disable_ipv6=1, > but then instead of allowing an RA to add an address then > immediately fail DAD, we simply don't allow the address to be > added in the first place. This also lets the user set this flag > and disable all IPv6 addresses on the interface, or on the entire > system. > > Signed-off-by: Brian Haley <brian.haley@hp.com> Applied to net-next-2.6, thanks! -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 7185e4c..ec5de02 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1043,7 +1043,9 @@ max_addresses - INTEGER Default: 16 disable_ipv6 - BOOLEAN - Disable IPv6 operation. + Disable IPv6 operation. If accept_dad is set to 2, this value + will be dynamically set to TRUE if DAD fails for the link-local + address. Default: FALSE (enable IPv6 operation) accept_dad - INTEGER diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index e83852a..717584b 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -590,6 +590,7 @@ ipv6_add_addr(struct inet6_dev *idev, const struct in6_addr *addr, int pfxlen, { struct inet6_ifaddr *ifa = NULL; struct rt6_info *rt; + struct net *net = dev_net(idev->dev); int hash; int err = 0; int addr_type = ipv6_addr_type(addr); @@ -606,6 +607,11 @@ ipv6_add_addr(struct inet6_dev *idev, const struct in6_addr *addr, int pfxlen, goto out2; } + if (idev->cnf.disable_ipv6 || net->ipv6.devconf_all->disable_ipv6) { + err = -EACCES; + goto out2; + } + write_lock(&addrconf_hash_lock); /* Ignore adding duplicate addresses on an interface */ @@ -1433,6 +1439,11 @@ static void addrconf_dad_stop(struct inet6_ifaddr *ifp) void addrconf_dad_failure(struct inet6_ifaddr *ifp) { struct inet6_dev *idev = ifp->idev; + + if (net_ratelimit()) + printk(KERN_INFO "%s: IPv6 duplicate address detected!\n", + ifp->idev->dev->name); + if (idev->cnf.accept_dad > 1 && !idev->cnf.disable_ipv6) { struct in6_addr addr; @@ -1443,11 +1454,12 @@ void addrconf_dad_failure(struct inet6_ifaddr *ifp) ipv6_addr_equal(&ifp->addr, &addr)) { /* DAD failed for link-local based on MAC address */ idev->cnf.disable_ipv6 = 1; + + printk(KERN_INFO "%s: IPv6 being disabled!\n", + ifp->idev->dev->name); } } - if (net_ratelimit()) - printk(KERN_INFO "%s: duplicate address detected!\n", ifp->idev->dev->name); addrconf_dad_stop(ifp); } @@ -2823,11 +2835,6 @@ static void addrconf_dad_timer(unsigned long data) read_unlock_bh(&idev->lock); goto out; } - if (idev->cnf.accept_dad > 1 && idev->cnf.disable_ipv6) { - read_unlock_bh(&idev->lock); - addrconf_dad_failure(ifp); - return; - } spin_lock_bh(&ifp->lock); if (ifp->probes == 0) { /*
It doesn't look like the disable_ipv6 devconf setting works as described in ip-sysctl.txt. I think it was originally designed to only be set by addrconf_dad_failure(), but since it's mode 0644 it can be controlled through sysctl -w. Here's an example: # sysctl -w net.ipv6.conf.eth0.disable_ipv6=1 net.ipv6.conf.eth0.disable_ipv6 = 1 # sysctl -w net.ipv6.conf.eth0.accept_dad=2 net.ipv6.conf.eth0.accept_dad = 2 # ifdown eth0 # ifup eth0 Mar 5 11:23:45 titan kernel: eth0: duplicate address detected! # ip -6 a show dev eth0 5: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000 inet6 fe80::21f:29ff:fe5a:ef04/64 scope link tentative valid_lft forever preferred_lft forever The address didn't actually fail DAD, but since disable_ipv6 was set, addrconf_dad_timer() called addrconf_dad_failure() before checking if it succeeded. The following patch fixes the behavior. The other option is to make this value read-only, but disable_ipv6 can be useful. --- Fix the behavior of allowing both sysctl and addrconf_dad_failure() to set the disable_ipv6 parameter without any bad side-effects. If DAD fails and accept_dad > 1, we will still set disable_ipv6=1, but then instead of allowing an RA to add an address then immediately fail DAD, we simply don't allow the address to be added in the first place. This also lets the user set this flag and disable all IPv6 addresses on the interface, or on the entire system. Signed-off-by: Brian Haley <brian.haley@hp.com> --- Documentation/networking/ip-sysctl.txt | 4 +++- net/ipv6/addrconf.c | 21 ++++++++++++++------- 2 files changed, 17 insertions(+), 8 deletions(-)