diff mbox

ARM: dt: tegra: whistler: add regulators

Message ID 1344017484-29395-1-git-send-email-swarren@wwwdotorg.org
State Accepted, archived
Headers show

Commit Message

Stephen Warren Aug. 3, 2012, 6:11 p.m. UTC 
From: Stephen Warren <swarren@nvidia.com>

Whistler uses a Maxim 8907 regulator. Instantiate this.

The voltage settings were derived from the schematic. The only exception
is the BBAT voltage; the schematic says 1.2v, but the HW can't go that
low, so use the HW default of 2.4v instead.

Almost all regulators list all driven supply signal names in their
regulator-names property. The exception is nvvdd_sv3, which is in turn
named 12 more different names on the schematic, so these were omitted
for brevity.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
 arch/arm/boot/dts/tegra20-whistler.dts |  294 ++++++++++++++++++++++++++++++++
 1 files changed, 294 insertions(+), 0 deletions(-)

Comments

Stephen Warren Aug. 15, 2012, 4:58 p.m. UTC | #1 
On 08/03/2012 12:11 PM, Stephen Warren wrote:
> Whistler uses a Maxim 8907 regulator. Instantiate this.
> 
> The voltage settings were derived from the schematic. The only exception
> is the BBAT voltage; the schematic says 1.2v, but the HW can't go that
> low, so use the HW default of 2.4v instead.
> 
> Almost all regulators list all driven supply signal names in their
> regulator-names property. The exception is nvvdd_sv3, which is in turn
> named 12 more different names on the schematic, so these were omitted
> for brevity.

Applied to Tegra's for-3.7/dt branch.

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index 6916310..7338baa 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -261,6 +261,285 @@ 
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		max8907@3c {
+			compatible = "maxim,max8907";
+			reg = <0x3c>;
+			interrupts = <0 86 0x4>;
+
+			mbatt-supply = <&usb0_vbus_reg>;
+			in-v1-supply = <&mbatt_reg>;
+			in-v2-supply = <&mbatt_reg>;
+			in-v3-supply = <&mbatt_reg>;
+			in1-supply = <&mbatt_reg>;
+			in2-supply = <&nvvdd_sv3_reg>;
+			in3-supply = <&mbatt_reg>;
+			in4-supply = <&mbatt_reg>;
+			in5-supply = <&mbatt_reg>;
+			in6-supply = <&mbatt_reg>;
+			in7-supply = <&mbatt_reg>;
+			in8-supply = <&mbatt_reg>;
+			in9-supply = <&mbatt_reg>;
+			in10-supply = <&mbatt_reg>;
+			in11-supply = <&mbatt_reg>;
+			in12-supply = <&mbatt_reg>;
+			in13-supply = <&mbatt_reg>;
+			in14-supply = <&mbatt_reg>;
+			in15-supply = <&mbatt_reg>;
+			in16-supply = <&mbatt_reg>;
+			in17-supply = <&nvvdd_sv3_reg>;
+			in18-supply = <&nvvdd_sv3_reg>;
+			in19-supply = <&mbatt_reg>;
+			in20-supply = <&mbatt_reg>;
+			lxw-supply = <&mbatt_reg>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mbatt_reg: regulator@0 {
+					reg = <0>;
+					regulator-compatible = "mbatt";
+					regulator-name = "vbat_pmu";
+					regulator-always-on;
+				};
+
+				regulator@1 {
+					reg = <1>;
+					regulator-compatible = "sd1";
+					regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				regulator@2 {
+					reg = <2>;
+					regulator-compatible = "sd2";
+					regulator-name = "nvvdd_sv2,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				nvvdd_sv3_reg: regulator@3 {
+					reg = <3>;
+					regulator-compatible = "sd3";
+					regulator-name = "nvvdd_sv3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				regulator@4 {
+					reg = <4>;
+					regulator-compatible = "ldo1";
+					regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				regulator@5 {
+					reg = <5>;
+					regulator-compatible = "ldo2";
+					regulator-name = "nvvdd_ldo2,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				regulator@6 {
+					reg = <6>;
+					regulator-compatible = "ldo3";
+					regulator-name = "nvvdd_ldo3,vcom_1v8b";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				regulator@7 {
+					reg = <7>;
+					regulator-compatible = "ldo4";
+					regulator-name = "nvvdd_ldo4,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				regulator@8 {
+					reg = <8>;
+					regulator-compatible = "ldo5";
+					regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				regulator@9 {
+					reg = <9>;
+					regulator-compatible = "ldo6";
+					regulator-name = "nvvdd_ldo6,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@10 {
+					reg = <10>;
+					regulator-compatible = "ldo7";
+					regulator-name = "nvvdd_ldo7,avddio_audio";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				regulator@11 {
+					reg = <11>;
+					regulator-compatible = "ldo8";
+					regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+				};
+
+				regulator@12 {
+					reg = <12>;
+					regulator-compatible = "ldo9";
+					regulator-name = "nvvdd_ldo9,avdd_cam*";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				regulator@13 {
+					reg = <13>;
+					regulator-compatible = "ldo10";
+					regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				regulator@14 {
+					reg = <14>;
+					regulator-compatible = "ldo11";
+					regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@15 {
+					reg = <15>;
+					regulator-compatible = "ldo12";
+					regulator-name = "nvvdd_ldo12,vddio_sdio";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				regulator@16 {
+					reg = <16>;
+					regulator-compatible = "ldo13";
+					regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				regulator@17 {
+					reg = <17>;
+					regulator-compatible = "ldo14";
+					regulator-name = "nvvdd_ldo14,avdd_vdac";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				regulator@18 {
+					reg = <18>;
+					regulator-compatible = "ldo15";
+					regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				regulator@19 {
+					reg = <19>;
+					regulator-compatible = "ldo16";
+					regulator-name = "nvvdd_ldo16,vdd_dbrtr";
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+				};
+
+				regulator@20 {
+					reg = <20>;
+					regulator-compatible = "ldo17";
+					regulator-name = "nvvdd_ldo17,vddio_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				regulator@21 {
+					reg = <21>;
+					regulator-compatible = "ldo18";
+					regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@22 {
+					reg = <22>;
+					regulator-compatible = "ldo19";
+					regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				regulator@23 {
+					reg = <23>;
+					regulator-compatible = "ldo20";
+					regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				regulator@24 {
+					reg = <24>;
+					regulator-compatible = "out5v";
+					regulator-name = "usb0_vbus_reg";
+				};
+
+				regulator@25 {
+					reg = <25>;
+					regulator-compatible = "out33v";
+					regulator-name = "pmu_out3v3";
+				};
+
+				regulator@26 {
+					reg = <26>;
+					regulator-compatible = "bbat";
+					regulator-name = "pmu_bbat";
+					regulator-min-microvolt = <2400000>;
+					regulator-max-microvolt = <2400000>;
+					regulator-always-on;
+				};
+
+				regulator@27 {
+					reg = <27>;
+					regulator-compatible = "sdby";
+					regulator-name = "vdd_aon";
+					regulator-always-on;
+				};
+
+				regulator@28 {
+					reg = <28>;
+					regulator-compatible = "vrtc";
+					regulator-name = "vrtc,pmu_vccadc";
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	pmc {
+		nvidia,invert-interrupt;
 	};
 
 	usb@c5000000 {
@@ -284,6 +563,21 @@ 
 		bus-width = <8>;
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb0_vbus_reg: regulator {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+
 	sound {
 		compatible = "nvidia,tegra-audio-wm8753-whistler",
 			     "nvidia,tegra-audio-wm8753";