| Message ID | 20230102221815.273719-2-prabhakar.mahadev-lad.rj@bp.renesas.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Add IRQC support to RZ/G2UL SoC | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dtbs-check | warning | build log |
| robh/dt-meta-schema | success |
On Mon, 02 Jan 2023 22:18:10 +0000, Prabhakar wrote: > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Document RZ/G2UL (R9A07G043U) IRQC bindings. The IRQC block on RZ/G2UL SoC > is almost identical to one found on the RZ/G2L SoC the only difference > being it can support BUS_ERR_INT for which it has additional registers. > Hence new generic compatible string "renesas,r9a07g043u-irqc" is added > for RZ/G2UL SoC. > > Now that we have additional interrupt for RZ/G2UL and RZ/Five SoC > interrupt-names property is added so that we can parse them based on > names. > > While at it updated the example node to four spaces and added > interrupt-names property. > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > --- > v2->v3 > * Dropped RZ/G2UL specific string > > v1- > v2 > * Dropped RB tags > * Added generic compatible string for rzg2ul > * Added interrupt-names > * Added checks for RZ/G2UL to make sure interrupts are 42 and interrupt-names > * Updated example node with interrupt-names > * Used 4 spaces for example node > --- > .../renesas,rzg2l-irqc.yaml | 225 +++++++++++++----- > 1 file changed, 170 insertions(+), 55 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org>
On Mon, Jan 2, 2023 at 11:19 PM Prabhakar <prabhakar.csengg@gmail.com> wrote: > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Document RZ/G2UL (R9A07G043U) IRQC bindings. The IRQC block on RZ/G2UL SoC > is almost identical to one found on the RZ/G2L SoC the only difference > being it can support BUS_ERR_INT for which it has additional registers. > Hence new generic compatible string "renesas,r9a07g043u-irqc" is added > for RZ/G2UL SoC. > > Now that we have additional interrupt for RZ/G2UL and RZ/Five SoC > interrupt-names property is added so that we can parse them based on > names. > > While at it updated the example node to four spaces and added > interrupt-names property. > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > --- > v2->v3 > * Dropped RZ/G2UL specific string Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Hi Marc, On Mon, Jan 2, 2023 at 10:18 PM Prabhakar <prabhakar.csengg@gmail.com> wrote: > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Document RZ/G2UL (R9A07G043U) IRQC bindings. The IRQC block on RZ/G2UL SoC > is almost identical to one found on the RZ/G2L SoC the only difference > being it can support BUS_ERR_INT for which it has additional registers. > Hence new generic compatible string "renesas,r9a07g043u-irqc" is added > for RZ/G2UL SoC. > > Now that we have additional interrupt for RZ/G2UL and RZ/Five SoC > interrupt-names property is added so that we can parse them based on > names. > > While at it updated the example node to four spaces and added > interrupt-names property. > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > --- > v2->v3 > * Dropped RZ/G2UL specific string > > v1- > v2 > * Dropped RB tags > * Added generic compatible string for rzg2ul > * Added interrupt-names > * Added checks for RZ/G2UL to make sure interrupts are 42 and interrupt-names > * Updated example node with interrupt-names > * Used 4 spaces for example node > --- > .../renesas,rzg2l-irqc.yaml | 225 +++++++++++++----- > 1 file changed, 170 insertions(+), 55 deletions(-) > Looks like this patch got missed. Could you pick this one up or shall I just resend this patch. Cheers, Prabhakar > diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml > index 33b90e975e33..fc900ce2fe0a 100644 > --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml > +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml > @@ -19,13 +19,11 @@ description: | > - NMI edge select (NMI is not treated as NMI exception and supports fall edge and > stand-up edge detection interrupts) > > -allOf: > - - $ref: /schemas/interrupt-controller.yaml# > - > properties: > compatible: > items: > - enum: > + - renesas,r9a07g043u-irqc # RZ/G2UL > - renesas,r9a07g044-irqc # RZ/G2{L,LC} > - renesas,r9a07g054-irqc # RZ/V2L > - const: renesas,rzg2l-irqc > @@ -44,7 +42,96 @@ properties: > maxItems: 1 > > interrupts: > - maxItems: 41 > + minItems: 41 > + items: > + - description: NMI interrupt > + - description: IRQ0 interrupt > + - description: IRQ1 interrupt > + - description: IRQ2 interrupt > + - description: IRQ3 interrupt > + - description: IRQ4 interrupt > + - description: IRQ5 interrupt > + - description: IRQ6 interrupt > + - description: IRQ7 interrupt > + - description: GPIO interrupt, TINT0 > + - description: GPIO interrupt, TINT1 > + - description: GPIO interrupt, TINT2 > + - description: GPIO interrupt, TINT3 > + - description: GPIO interrupt, TINT4 > + - description: GPIO interrupt, TINT5 > + - description: GPIO interrupt, TINT6 > + - description: GPIO interrupt, TINT7 > + - description: GPIO interrupt, TINT8 > + - description: GPIO interrupt, TINT9 > + - description: GPIO interrupt, TINT10 > + - description: GPIO interrupt, TINT11 > + - description: GPIO interrupt, TINT12 > + - description: GPIO interrupt, TINT13 > + - description: GPIO interrupt, TINT14 > + - description: GPIO interrupt, TINT15 > + - description: GPIO interrupt, TINT16 > + - description: GPIO interrupt, TINT17 > + - description: GPIO interrupt, TINT18 > + - description: GPIO interrupt, TINT19 > + - description: GPIO interrupt, TINT20 > + - description: GPIO interrupt, TINT21 > + - description: GPIO interrupt, TINT22 > + - description: GPIO interrupt, TINT23 > + - description: GPIO interrupt, TINT24 > + - description: GPIO interrupt, TINT25 > + - description: GPIO interrupt, TINT26 > + - description: GPIO interrupt, TINT27 > + - description: GPIO interrupt, TINT28 > + - description: GPIO interrupt, TINT29 > + - description: GPIO interrupt, TINT30 > + - description: GPIO interrupt, TINT31 > + - description: Bus error interrupt > + > + interrupt-names: > + minItems: 41 > + items: > + - const: nmi > + - const: irq0 > + - const: irq1 > + - const: irq2 > + - const: irq3 > + - const: irq4 > + - const: irq5 > + - const: irq6 > + - const: irq7 > + - const: tint0 > + - const: tint1 > + - const: tint2 > + - const: tint3 > + - const: tint4 > + - const: tint5 > + - const: tint6 > + - const: tint7 > + - const: tint8 > + - const: tint9 > + - const: tint10 > + - const: tint11 > + - const: tint12 > + - const: tint13 > + - const: tint14 > + - const: tint15 > + - const: tint16 > + - const: tint17 > + - const: tint18 > + - const: tint19 > + - const: tint20 > + - const: tint21 > + - const: tint22 > + - const: tint23 > + - const: tint24 > + - const: tint25 > + - const: tint26 > + - const: tint27 > + - const: tint28 > + - const: tint29 > + - const: tint30 > + - const: tint31 > + - const: bus-err > > clocks: > maxItems: 2 > @@ -72,6 +159,23 @@ required: > - power-domains > - resets > > +allOf: > + - $ref: /schemas/interrupt-controller.yaml# > + > + - if: > + properties: > + compatible: > + contains: > + const: renesas,r9a07g043u-irqc > + then: > + properties: > + interrupts: > + minItems: 42 > + interrupt-names: > + minItems: 42 > + required: > + - interrupt-names > + > unevaluatedProperties: false > > examples: > @@ -80,55 +184,66 @@ examples: > #include <dt-bindings/clock/r9a07g044-cpg.h> > > irqc: interrupt-controller@110a0000 { > - compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc"; > - reg = <0x110a0000 0x10000>; > - #interrupt-cells = <2>; > - #address-cells = <0>; > - interrupt-controller; > - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, > - <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, > - <&cpg CPG_MOD R9A07G044_IA55_PCLK>; > - clock-names = "clk", "pclk"; > - power-domains = <&cpg>; > - resets = <&cpg R9A07G044_IA55_RESETN>; > + compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc"; > + reg = <0x110a0000 0x10000>; > + #interrupt-cells = <2>; > + #address-cells = <0>; > + interrupt-controller; > + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "nmi", > + "irq0", "irq1", "irq2", "irq3", > + "irq4", "irq5", "irq6", "irq7", > + "tint0", "tint1", "tint2", "tint3", > + "tint4", "tint5", "tint6", "tint7", > + "tint8", "tint9", "tint10", "tint11", > + "tint12", "tint13", "tint14", "tint15", > + "tint16", "tint17", "tint18", "tint19", > + "tint20", "tint21", "tint22", "tint23", > + "tint24", "tint25", "tint26", "tint27", > + "tint28", "tint29", "tint30", "tint31"; > + clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, > + <&cpg CPG_MOD R9A07G044_IA55_PCLK>; > + clock-names = "clk", "pclk"; > + power-domains = <&cpg>; > + resets = <&cpg R9A07G044_IA55_RESETN>; > }; > -- > 2.25.1 >
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml index 33b90e975e33..fc900ce2fe0a 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml @@ -19,13 +19,11 @@ description: | - NMI edge select (NMI is not treated as NMI exception and supports fall edge and stand-up edge detection interrupts) -allOf: - - $ref: /schemas/interrupt-controller.yaml# - properties: compatible: items: - enum: + - renesas,r9a07g043u-irqc # RZ/G2UL - renesas,r9a07g044-irqc # RZ/G2{L,LC} - renesas,r9a07g054-irqc # RZ/V2L - const: renesas,rzg2l-irqc @@ -44,7 +42,96 @@ properties: maxItems: 1 interrupts: - maxItems: 41 + minItems: 41 + items: + - description: NMI interrupt + - description: IRQ0 interrupt + - description: IRQ1 interrupt + - description: IRQ2 interrupt + - description: IRQ3 interrupt + - description: IRQ4 interrupt + - description: IRQ5 interrupt + - description: IRQ6 interrupt + - description: IRQ7 interrupt + - description: GPIO interrupt, TINT0 + - description: GPIO interrupt, TINT1 + - description: GPIO interrupt, TINT2 + - description: GPIO interrupt, TINT3 + - description: GPIO interrupt, TINT4 + - description: GPIO interrupt, TINT5 + - description: GPIO interrupt, TINT6 + - description: GPIO interrupt, TINT7 + - description: GPIO interrupt, TINT8 + - description: GPIO interrupt, TINT9 + - description: GPIO interrupt, TINT10 + - description: GPIO interrupt, TINT11 + - description: GPIO interrupt, TINT12 + - description: GPIO interrupt, TINT13 + - description: GPIO interrupt, TINT14 + - description: GPIO interrupt, TINT15 + - description: GPIO interrupt, TINT16 + - description: GPIO interrupt, TINT17 + - description: GPIO interrupt, TINT18 + - description: GPIO interrupt, TINT19 + - description: GPIO interrupt, TINT20 + - description: GPIO interrupt, TINT21 + - description: GPIO interrupt, TINT22 + - description: GPIO interrupt, TINT23 + - description: GPIO interrupt, TINT24 + - description: GPIO interrupt, TINT25 + - description: GPIO interrupt, TINT26 + - description: GPIO interrupt, TINT27 + - description: GPIO interrupt, TINT28 + - description: GPIO interrupt, TINT29 + - description: GPIO interrupt, TINT30 + - description: GPIO interrupt, TINT31 + - description: Bus error interrupt + + interrupt-names: + minItems: 41 + items: + - const: nmi + - const: irq0 + - const: irq1 + - const: irq2 + - const: irq3 + - const: irq4 + - const: irq5 + - const: irq6 + - const: irq7 + - const: tint0 + - const: tint1 + - const: tint2 + - const: tint3 + - const: tint4 + - const: tint5 + - const: tint6 + - const: tint7 + - const: tint8 + - const: tint9 + - const: tint10 + - const: tint11 + - const: tint12 + - const: tint13 + - const: tint14 + - const: tint15 + - const: tint16 + - const: tint17 + - const: tint18 + - const: tint19 + - const: tint20 + - const: tint21 + - const: tint22 + - const: tint23 + - const: tint24 + - const: tint25 + - const: tint26 + - const: tint27 + - const: tint28 + - const: tint29 + - const: tint30 + - const: tint31 + - const: bus-err clocks: maxItems: 2 @@ -72,6 +159,23 @@ required: - power-domains - resets +allOf: + - $ref: /schemas/interrupt-controller.yaml# + + - if: + properties: + compatible: + contains: + const: renesas,r9a07g043u-irqc + then: + properties: + interrupts: + minItems: 42 + interrupt-names: + minItems: 42 + required: + - interrupt-names + unevaluatedProperties: false examples: @@ -80,55 +184,66 @@ examples: #include <dt-bindings/clock/r9a07g044-cpg.h> irqc: interrupt-controller@110a0000 { - compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc"; - reg = <0x110a0000 0x10000>; - #interrupt-cells = <2>; - #address-cells = <0>; - interrupt-controller; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, - <&cpg CPG_MOD R9A07G044_IA55_PCLK>; - clock-names = "clk", "pclk"; - power-domains = <&cpg>; - resets = <&cpg R9A07G044_IA55_RESETN>; + compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc"; + reg = <0x110a0000 0x10000>; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "nmi", + "irq0", "irq1", "irq2", "irq3", + "irq4", "irq5", "irq6", "irq7", + "tint0", "tint1", "tint2", "tint3", + "tint4", "tint5", "tint6", "tint7", + "tint8", "tint9", "tint10", "tint11", + "tint12", "tint13", "tint14", "tint15", + "tint16", "tint17", "tint18", "tint19", + "tint20", "tint21", "tint22", "tint23", + "tint24", "tint25", "tint26", "tint27", + "tint28", "tint29", "tint30", "tint31"; + clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, + <&cpg CPG_MOD R9A07G044_IA55_PCLK>; + clock-names = "clk", "pclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_IA55_RESETN>; };