Message ID | 20230810102309.223183-1-robert.marko@sartura.hr |
---|---|
State | Not Applicable, archived |
Headers | show |
Series | [net-next,1/2] dt-bindings: net: ethernet-controller: add PSGMII mode | expand |
Context | Check | Description |
---|---|---|
robh/checkpatch | success | |
robh/patch-applied | success | |
robh/dt-meta-schema | fail | build log |
On Thu, Aug 10, 2023 at 12:22:55PM +0200, Robert Marko wrote: > From: Gabor Juhos <j4g8y7@gmail.com> > > The PSGMII interface is similar to QSGMII. The main difference > is that the PSGMII interface combines five SGMII lines into a > single link while in QSGMII only four lines are combined. Please also update the docs at Documentation/networking/phy.rst section "PHY interface modes" to describe this mode. Thanks.
On Thu, 10 Aug 2023 12:22:54 +0200, Robert Marko wrote: > Add a new PSGMII mode which is similar to QSGMII with the difference being > that it combines 5 SGMII lines into a single link compared to 4 on QSGMII. > > It is commonly used by Qualcomm on their QCA807x PHY series. > > Signed-off-by: Robert Marko <robert.marko@sartura.hr> > --- > Documentation/devicetree/bindings/net/ethernet-controller.yaml | 1 + > 1 file changed, 1 insertion(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230810102309.223183-1-robert.marko@sartura.hr The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Thu, Aug 10, 2023 at 1:21 PM Rob Herring <robh@kernel.org> wrote: > > > On Thu, 10 Aug 2023 12:22:54 +0200, Robert Marko wrote: > > Add a new PSGMII mode which is similar to QSGMII with the difference being > > that it combines 5 SGMII lines into a single link compared to 4 on QSGMII. > > > > It is commonly used by Qualcomm on their QCA807x PHY series. > > > > Signed-off-by: Robert Marko <robert.marko@sartura.hr> > > --- > > Documentation/devicetree/bindings/net/ethernet-controller.yaml | 1 + > > 1 file changed, 1 insertion(+) > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > > > doc reference errors (make refcheckdocs): I am not getting any errors, nor there are any listed here as well. Is this a bot issue maybe? Regards Robert > > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230810102309.223183-1-robert.marko@sartura.hr > > The base for the series is generally the latest rc1. A different dependency > should be noted in *this* patch. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit after running the above command yourself. Note > that DT_SCHEMA_FILES can be set to your schema file to speed up checking > your schema. However, it must be unset to test all examples with your schema. >
On Thu, Aug 10, 2023 at 5:32 AM Robert Marko <robert.marko@sartura.hr> wrote: > > On Thu, Aug 10, 2023 at 1:21 PM Rob Herring <robh@kernel.org> wrote: > > > > > > On Thu, 10 Aug 2023 12:22:54 +0200, Robert Marko wrote: > > > Add a new PSGMII mode which is similar to QSGMII with the difference being > > > that it combines 5 SGMII lines into a single link compared to 4 on QSGMII. > > > > > > It is commonly used by Qualcomm on their QCA807x PHY series. > > > > > > Signed-off-by: Robert Marko <robert.marko@sartura.hr> > > > --- > > > Documentation/devicetree/bindings/net/ethernet-controller.yaml | 1 + > > > 1 file changed, 1 insertion(+) > > > > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > > > yamllint warnings/errors: > > > > dtschema/dtc warnings/errors: > > > > > > doc reference errors (make refcheckdocs): > > I am not getting any errors, nor there are any listed here as well. > Is this a bot issue maybe? Yes. Converting dtschema to pyproject.toml yesterday did not go well... Rob
On Thu, 10 Aug 2023 12:22:54 +0200, Robert Marko wrote: > Add a new PSGMII mode which is similar to QSGMII with the difference being > that it combines 5 SGMII lines into a single link compared to 4 on QSGMII. > > It is commonly used by Qualcomm on their QCA807x PHY series. > > Signed-off-by: Robert Marko <robert.marko@sartura.hr> > --- > Documentation/devicetree/bindings/net/ethernet-controller.yaml | 1 + > 1 file changed, 1 insertion(+) > Acked-by: Rob Herring <robh@kernel.org>
On Thu, Aug 10, 2023 at 12:22:55PM +0200, Robert Marko wrote: > From: Gabor Juhos <j4g8y7@gmail.com> > > The PSGMII interface is similar to QSGMII. The main difference > is that the PSGMII interface combines five SGMII lines into a > single link while in QSGMII only four lines are combined. > > Similarly to the QSGMII, this interface mode might also needs > special handling within the MAC driver. > > It is commonly used by Qualcomm with their QCA807x PHY series and > modern WiSoC-s. > > Add definitions for the PHY layer to allow to express this type > of connection between the MAC and PHY. > > Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> > Signed-off-by: Robert Marko <robert.marko@sartura.hr> ... > diff --git a/include/linux/phy.h b/include/linux/phy.h > index ba08b0e60279..23756a10d40b 100644 > --- a/include/linux/phy.h > +++ b/include/linux/phy.h > @@ -147,6 +147,7 @@ typedef enum { > PHY_INTERFACE_MODE_XGMII, > PHY_INTERFACE_MODE_XLGMII, > PHY_INTERFACE_MODE_MOCA, > + PHY_INTERFACE_MODE_PSGMII, Hi Gabor an Robert, Please add PHY_INTERFACE_MODE_PSGMII to the kernel doc for phy_interface_t which appears a little earlier in phy.h > PHY_INTERFACE_MODE_QSGMII, > PHY_INTERFACE_MODE_TRGMII, > PHY_INTERFACE_MODE_100BASEX, ...
On Fri, Aug 11, 2023 at 12:54 PM Simon Horman <horms@kernel.org> wrote: > > On Thu, Aug 10, 2023 at 12:22:55PM +0200, Robert Marko wrote: > > From: Gabor Juhos <j4g8y7@gmail.com> > > > > The PSGMII interface is similar to QSGMII. The main difference > > is that the PSGMII interface combines five SGMII lines into a > > single link while in QSGMII only four lines are combined. > > > > Similarly to the QSGMII, this interface mode might also needs > > special handling within the MAC driver. > > > > It is commonly used by Qualcomm with their QCA807x PHY series and > > modern WiSoC-s. > > > > Add definitions for the PHY layer to allow to express this type > > of connection between the MAC and PHY. > > > > Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> > > Signed-off-by: Robert Marko <robert.marko@sartura.hr> > > ... > > > diff --git a/include/linux/phy.h b/include/linux/phy.h > > index ba08b0e60279..23756a10d40b 100644 > > --- a/include/linux/phy.h > > +++ b/include/linux/phy.h > > @@ -147,6 +147,7 @@ typedef enum { > > PHY_INTERFACE_MODE_XGMII, > > PHY_INTERFACE_MODE_XLGMII, > > PHY_INTERFACE_MODE_MOCA, > > + PHY_INTERFACE_MODE_PSGMII, > > Hi Gabor an Robert, > > Please add PHY_INTERFACE_MODE_PSGMII to the kernel doc for phy_interface_t > which appears a little earlier in phy.h Hi, I already have it prepared as part of v2, will send it later today. Regards, Robert > > > PHY_INTERFACE_MODE_QSGMII, > > PHY_INTERFACE_MODE_TRGMII, > > PHY_INTERFACE_MODE_100BASEX, > > ...
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 6b0d359367da..9f6a5ccbcefe 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -66,6 +66,7 @@ properties: - mii - gmii - sgmii + - psgmii - qsgmii - qusgmii - tbi
Add a new PSGMII mode which is similar to QSGMII with the difference being that it combines 5 SGMII lines into a single link compared to 4 on QSGMII. It is commonly used by Qualcomm on their QCA807x PHY series. Signed-off-by: Robert Marko <robert.marko@sartura.hr> --- Documentation/devicetree/bindings/net/ethernet-controller.yaml | 1 + 1 file changed, 1 insertion(+)