Message ID | 20230307083559.2379758-1-korantwork@gmail.com |
---|---|
State | New |
Headers | show |
Series | [v2] PCI:vmd: add the module param to adjust msi mode | expand |
Please adjust the subject line to match previous history, e.g., PCI: vmd: Add ... MSI ... On Tue, Mar 07, 2023 at 04:35:59PM +0800, korantwork@gmail.com wrote: > From: Xinghui Li <korantli@tencent.com> > > In the legacy, the vmd msi-mode can only be adjusted by configing > vmd_ids table.This patch adds another way to adjust msi mode by > adjusting module param, which allow users easier to adjust the vmd > according to the I/O scenario without rebuilding driver.There are two > params could be recognized: on, off. The default param is "NULL", > the goal is not to affect the existing settings of the device. Please add a space after the period that ends each sentence. Capitalize "MSI" to match usage in spec. > Signed-off-by: Xinghui Li <korantli@tencent.com> > Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com> I didn't see a response from Nirmal on the mailing list with the Reviewed-by. I think it's better if Nirmal responds to the patch directly on the mailing list with the Reviewed-by, and whoever applies the patch can incorporate it. Otherwise we have no visibility into any interaction between you and Nirmal. > --- > drivers/pci/controller/vmd.c | 26 ++++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c > index 990630ec57c6..8b42b2c1d949 100644 > --- a/drivers/pci/controller/vmd.c > +++ b/drivers/pci/controller/vmd.c > @@ -34,6 +34,20 @@ > #define MB2_SHADOW_OFFSET 0x2000 > #define MB2_SHADOW_SIZE 16 > > +/* > + * The VMD msi_remap module parameter provides the alternative way > + * to adjust msi mode when loading vmd.ko other than vmd_ids table. > + * There are two params could be recognized: > + * > + * 1-off > + * 2-on It looks like your code matches either "on" or "off", not "1" or "2". > + * The default param is "NULL", the goal is not to affect the existing > + * settings of the device. > + */ > +char *msi_remap = "NULL"; Looks like this should be static? And using "NULL" (as opposed to something like the empty string "") suggests some intrinsic meaning of "NULL", but I think there is no intrinsic meaning and the only point is that "NULL" doesn't match either "on" or "off". > +module_param(msi_remap, charp, 0444); > + > enum vmd_features { > /* > * Device may contain registers which hint the physical location of the > @@ -875,6 +889,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) > return ret; > > vmd_set_msi_remapping(vmd, true); > + dev_info(&vmd->dev->dev, "init vmd with remapping msi-x\n"); > > ret = vmd_create_irq_domain(vmd); > if (ret) > @@ -887,6 +902,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) > irq_domain_update_bus_token(vmd->irq_domain, DOMAIN_BUS_VMD_MSI); > } else { > vmd_set_msi_remapping(vmd, false); > + dev_info(&vmd->dev->dev, "init vmd with bypass msi-x\n"); > } > > pci_add_resource(&resources, &vmd->resources[0]); > @@ -955,6 +971,14 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) > return 0; > } > > +static void vmd_config_msi_remap_param(unsigned long *features) > +{ > + if (strcmp(msi_remap, "on") == 0) > + *features &= ~(VMD_FEAT_CAN_BYPASS_MSI_REMAP); > + else if (strcmp(msi_remap, "off") == 0) > + *features |= VMD_FEAT_CAN_BYPASS_MSI_REMAP; > +} > + > static int vmd_probe(struct pci_dev *dev, const struct pci_device_id *id) > { > unsigned long features = (unsigned long) id->driver_data; > @@ -984,6 +1008,8 @@ static int vmd_probe(struct pci_dev *dev, const struct pci_device_id *id) > if (err < 0) > goto out_release_instance; > > + vmd_config_msi_remap_param(&features); > + > vmd->cfgbar = pcim_iomap(dev, VMD_CFGBAR, 0); > if (!vmd->cfgbar) { > err = -ENOMEM; > -- > 2.31.1 >
Bjorn Helgaas <helgaas@kernel.org> 于2023年3月9日周四 06:57写道: > > Please adjust the subject line to match previous history, e.g., > > PCI: vmd: Add ... MSI ... > OK. I will fix it. Sorry for ignoring the subject format. > > In the legacy, the vmd msi-mode can only be adjusted by configing > > vmd_ids table.This patch adds another way to adjust msi mode by > > adjusting module param, which allow users easier to adjust the vmd > > according to the I/O scenario without rebuilding driver.There are two > > params could be recognized: on, off. The default param is "NULL", > > the goal is not to affect the existing settings of the device. > > Please add a space after the period that ends each sentence. > Capitalize "MSI" to match usage in spec. > Sorry for the format issue. I neglected them. My bad~ > > Signed-off-by: Xinghui Li <korantli@tencent.com> > > Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com> > > I didn't see a response from Nirmal on the mailing list with the > Reviewed-by. I think it's better if Nirmal responds to the patch > directly on the mailing list with the Reviewed-by, and whoever applies > the patch can incorporate it. Otherwise we have no visibility into > any interaction between you and Nirmal. > I pinged Nirmal to reply to this patch, It seems he forgot to cc the mail list in the previous version's discussion. > > +/* > > + * The VMD msi_remap module parameter provides the alternative way > > + * to adjust msi mode when loading vmd.ko other than vmd_ids table. > > + * There are two params could be recognized: > > + * > > + * 1-off > > + * 2-on > > It looks like your code matches either "on" or "off", not "1" or "2". > I will change the comment. It does mislead the reader. I mean the No.1 param is "on" and the No.2 param is "off" > > + * The default param is "NULL", the goal is not to affect the existing > > + * settings of the device. > > + */ > > +char *msi_remap = "NULL"; > > Looks like this should be static? And using "NULL" (as opposed to > something like the empty string "") suggests some intrinsic meaning of > "NULL", but I think there is no intrinsic meaning and the only point > is that "NULL" doesn't match either "on" or "off". > The "static" one is better, I will add it. Initial parameters with "NULL" just aim to mismatch "on" or "off". Do you prefer to init it without the default string?
On 3/9/2023 5:31 AM, Xinghui Li wrote: > Bjorn Helgaas <helgaas@kernel.org> 于2023年3月9日周四 06:57写道: >> Please adjust the subject line to match previous history, e.g., >> >> PCI: vmd: Add ... MSI ... >> > OK. I will fix it. Sorry for ignoring the subject format. > >>> In the legacy, the vmd msi-mode can only be adjusted by configing >>> vmd_ids table.This patch adds another way to adjust msi mode by >>> adjusting module param, which allow users easier to adjust the vmd >>> according to the I/O scenario without rebuilding driver.There are two >>> params could be recognized: on, off. The default param is "NULL", >>> the goal is not to affect the existing settings of the device. >> Please add a space after the period that ends each sentence. >> Capitalize "MSI" to match usage in spec. >> > Sorry for the format issue. I neglected them. My bad~ > >>> Signed-off-by: Xinghui Li <korantli@tencent.com> >>> Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com> >> I didn't see a response from Nirmal on the mailing list with the >> Reviewed-by. I think it's better if Nirmal responds to the patch >> directly on the mailing list with the Reviewed-by, and whoever applies >> the patch can incorporate it. Otherwise we have no visibility into >> any interaction between you and Nirmal. >> > I pinged Nirmal to reply to this patch, It seems he forgot to cc the > mail list in the previous version's discussion. > >>> +/* >>> + * The VMD msi_remap module parameter provides the alternative way >>> + * to adjust msi mode when loading vmd.ko other than vmd_ids table. >>> + * There are two params could be recognized: >>> + * >>> + * 1-off >>> + * 2-on >> It looks like your code matches either "on" or "off", not "1" or "2". >> > I will change the comment. It does mislead the reader. I mean the No.1 > param is "on" and the No.2 param is "off" > >>> + * The default param is "NULL", the goal is not to affect the existing >>> + * settings of the device. >>> + */ >>> +char *msi_remap = "NULL"; >> Looks like this should be static? And using "NULL" (as opposed to >> something like the empty string "") suggests some intrinsic meaning of >> "NULL", but I think there is no intrinsic meaning and the only point >> is that "NULL" doesn't match either "on" or "off". >> > The "static" one is better, I will add it. > Initial parameters with "NULL" just aim to mismatch "on" or "off". Do > you prefer to init it without the default string? Please address Bjorn's comments. Thank you. Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c index 990630ec57c6..8b42b2c1d949 100644 --- a/drivers/pci/controller/vmd.c +++ b/drivers/pci/controller/vmd.c @@ -34,6 +34,20 @@ #define MB2_SHADOW_OFFSET 0x2000 #define MB2_SHADOW_SIZE 16 +/* + * The VMD msi_remap module parameter provides the alternative way + * to adjust msi mode when loading vmd.ko other than vmd_ids table. + * There are two params could be recognized: + * + * 1-off + * 2-on + * + * The default param is "NULL", the goal is not to affect the existing + * settings of the device. + */ +char *msi_remap = "NULL"; +module_param(msi_remap, charp, 0444); + enum vmd_features { /* * Device may contain registers which hint the physical location of the @@ -875,6 +889,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) return ret; vmd_set_msi_remapping(vmd, true); + dev_info(&vmd->dev->dev, "init vmd with remapping msi-x\n"); ret = vmd_create_irq_domain(vmd); if (ret) @@ -887,6 +902,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) irq_domain_update_bus_token(vmd->irq_domain, DOMAIN_BUS_VMD_MSI); } else { vmd_set_msi_remapping(vmd, false); + dev_info(&vmd->dev->dev, "init vmd with bypass msi-x\n"); } pci_add_resource(&resources, &vmd->resources[0]); @@ -955,6 +971,14 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) return 0; } +static void vmd_config_msi_remap_param(unsigned long *features) +{ + if (strcmp(msi_remap, "on") == 0) + *features &= ~(VMD_FEAT_CAN_BYPASS_MSI_REMAP); + else if (strcmp(msi_remap, "off") == 0) + *features |= VMD_FEAT_CAN_BYPASS_MSI_REMAP; +} + static int vmd_probe(struct pci_dev *dev, const struct pci_device_id *id) { unsigned long features = (unsigned long) id->driver_data; @@ -984,6 +1008,8 @@ static int vmd_probe(struct pci_dev *dev, const struct pci_device_id *id) if (err < 0) goto out_release_instance; + vmd_config_msi_remap_param(&features); + vmd->cfgbar = pcim_iomap(dev, VMD_CFGBAR, 0); if (!vmd->cfgbar) { err = -ENOMEM;