| Message ID | CAPoEpV0ZSidL6aMXvB6LN1uS-3CUHS4ggT8RwFgmkzzCiYJ-XQ@mail.gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD) | expand |
Address detection does not work because cd6h/cd7h port io can be disabled, but it's accessible using mmio. This patch: https://lore.kernel.org/all/20210715221828.244536-1-Terry.Bowman@amd.com/ with modified AMD_PCI_SMBUS_REVISION_MMIO fixed base address detection. Problem with RMI4 touchpad / trackpoint remains, because rmi4-smbus needs host notify feature. I have tried implement this feature, without success. Interrupts on IRQ 7 (SMBus) are generated only for block data transfers, but not for trackpoint / touchpad move actions. I have looked at pinctrl_amd and it looks, that activity is signaled using GPIO. This looks promising: cat /sys/kernel/debug/pinctrl/AMDI0030:00/pingroups: group: i2c0 pin 145 (GPIO_145) pin 146 (GPIO_146) group: i2c1 pin 147 (GPIO_147) pin 148 (GPIO_148) group: i2c2 pin 113 (GPIO_113) pin 114 (GPIO_114) group: i2c3 pin 19 (GPIO_19) pin 20 (GPIO_20) After loading psmouse with forced enabled intertouch pin 19/20 started generating events.
Hi Miroslav, > On Thinkpad P14s gen 2 with AMD (model 21A00003CK, BIOS R1MET43W - 1.13) SMBus > address detection don't work and trackpoint has slow rate (30 Hz) because can't > use SMBus. Email is divided to SMBus and trackpoint section, there are issues in > both modules. Do you think this is this the same issue as described in https://bugzilla.kernel.org/show_bug.cgi?id=214597? Thank you for your detailed analysis! Wolfram
Hi again, > Address detection does not work because cd6h/cd7h port io can be > disabled, but it's accessible using mmio. This patch: > https://lore.kernel.org/all/20210715221828.244536-1-Terry.Bowman@amd.com/ > with modified AMD_PCI_SMBUS_REVISION_MMIO fixed base address > detection. Okay, this patch is stalled because Terry is waiting for review comments. I'll mention the high priority. > Problem with RMI4 touchpad / trackpoint remains, because rmi4-smbus > needs host notify feature. I have tried implement this feature, > without success. Interrupts on IRQ 7 (SMBus) are generated only for > block data transfers, but not for trackpoint / touchpad move actions. > I have looked at pinctrl_amd and it looks, that activity is signaled > using GPIO. This looks promising: Isn't the interrupt described in the ACPI tables? All the best, Wolfram
Hello, > Do you think this is this the same issue as described in > https://bugzilla.kernel.org/show_bug.cgi?id=214597 <https://bugzilla.kernel.org/show_bug.cgi?id=214597>? Probably not. > Isn't the interrupt described in the ACPI tables? Probably not. I am just web developer, i am not 100% sure, but i have not seen anything usable in ACPI tables: https://mireq.linuxos.sk/kernel/p14s_gen2_amd_acpi_tables.tar.xz Most important section with SMBus is here: https://lore.kernel.org/all/CAPoEpV0ZSidL6aMXvB6LN1uS-3CUHS4ggT8RwFgmkzzCiYJ-XQ@mail.gmail.com/ This section looked promising: Scope (_SB.I2CB) { Device (TPNL) { Name (_HID, "XXXX0000") // _HID: Hardware ID Name (_CID, "PNP0C50" /* HID Protocol Device (I2C bus) */) // _CID: Compatible ID Name (_S0W, 0x03) // _S0W: S0 Device Wake State Name (HID2, 0x00) Name (POIO, 0x00) Name (SBFB, ResourceTemplate () { I2cSerialBusV2 (0x0000, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.I2CB", 0x00, ResourceConsumer, _Y0C, Exclusive, ) }) Name (SBFG, ResourceTemplate () { GpioInt (Level, ActiveLow, ExclusiveAndWake, PullNone, 0x0000, "\\_SB.GPIO", 0x00, ResourceConsumer, , ) { // Pin list 0x0005 } }) CreateWordField (SBFB, \_SB.I2CB.TPNL._Y0C._ADR, BADR) // _ADR: Address CreateDWordField (SBFB, \_SB.I2CB.TPNL._Y0C._SPE, SPED) // _SPE: Speed Name (ITML, Package (0x0A) { Package (0x07) { 0x04F3, 0x2A3B, 0x10, 0x01, 0x01, "ELAN901C", 0x01 }, but method _STA returned 0x0 (device not present). There is no activity on pin 5. My device has synaptics trackpoint/touchpad, not elantech. I think, that this section is for touchscreen (not on my device). More infomations to GPIO: Following command does nothing if psmouse is loaded without synaptics_intertouch: gpiomon --num-events=1000 gpiochip0 19 After loading psmouse with intertouch it catches constantly cca 2000 changes/s. There are some changes like two rising / falling edges directly behind each other. I think, that clok is much faster, than gpiomon monitoring speed, catching communication with this command would be useless. I don't know why there is constant communication from trackpoint/touchpad to GPIO 19/20. Maybe some notification mechanism, attention, maybe something which stops after clearing some bit, i dont know. Schematic from Lenovo, documentation or anything useful wold be great, but whithout this i am just guessing. Pins 19/20 should be SCL/SDA of I2C3 (from coreboot, id don't know source of pin description: https://github.com/coreboot/coreboot/blob/cf39336ccfcc363162395bddf65113900aaf19fe/src/soc/amd/cezanne/include/soc/gpio.h#L152
Hello Miroslav, forgive me if it's a dumb question, but would this also apply to Intel platforms, or this kind of stuff chip maker specific? I got an Intel Tiger Lake. Thanks! Andrea IPPOLITO Il giorno gio 6 gen 2022 alle ore 16:03 Miroslav Bendík <miroslav.bendik@gmail.com> ha scritto: > > Address detection does not work because cd6h/cd7h port io can be > disabled, but > it's accessible using mmio. This patch: > https://lore.kernel.org/all/20210715221828.244536-1-Terry.Bowman@amd.com/ > with > modified AMD_PCI_SMBUS_REVISION_MMIO fixed base address detection. > > Problem with RMI4 touchpad / trackpoint remains, because rmi4-smbus > needs host > notify feature. I have tried implement this feature, without success. > Interrupts > on IRQ 7 (SMBus) are generated only for block data transfers, but not for > trackpoint / touchpad move actions. I have looked at pinctrl_amd and it > looks, > that activity is signaled using GPIO. This looks promising: > > cat /sys/kernel/debug/pinctrl/AMDI0030:00/pingroups: > > group: i2c0 > pin 145 (GPIO_145) > pin 146 (GPIO_146) > > group: i2c1 > pin 147 (GPIO_147) > pin 148 (GPIO_148) > > group: i2c2 > pin 113 (GPIO_113) > pin 114 (GPIO_114) > > group: i2c3 > pin 19 (GPIO_19) > pin 20 (GPIO_20) > > After loading psmouse with forced enabled intertouch pin 19/20 started > generating events. >
Hello, > forgive me if it's a dumb question, but would this also apply to Intel > platforms, or this kind of stuff chip maker specific? this is specific problem with SMBus without host notify function. I don't know if new intel hardware has problem with host notify.
Summary of synaptics_intertouch problem on Thinkpad with Ryzen 5850U:
Problem with wrong base address is fixed using this patch:
https://lore.kernel.org/all/20210715221828.244536-1-Terry.Bowman@amd.com/
Second problem is, that RMI4 driver don't work with i2c-piix4, because
it needs
I2C_FUNC_SMBUS_HOST_NOTIFY. I have added I2C_FUNC_SMBUS_HOST_NOTIFY to
piix4_func and psmouse can be loaded with synaptics_intertouch=1
parameter. Here
is output with rmi_core debug_flags=0xfffd - https://pastebin.com/xGRHyyXV
Synaptics is on address 0x2c (value 0x58/0x59 in SMBus register, bit 1
is r/w).
Command i2cdetect -l can see i2c busses:
i2cdetect -l
i2c-3 i2c AMDGPU DM i2c hw bus 1 I2C adapter
i2c-10 smbus SMBus PIIX4 adapter port 2 at 0b00 SMBus adapter
i2c-1 i2c Synopsys DesignWare I2C adapter I2C adapter
i2c-8 i2c AMDGPU DM aux hw bus 3 I2C adapter
i2c-6 i2c AMDGPU DM aux hw bus 0 I2C adapter
i2c-4 i2c AMDGPU DM i2c hw bus 2 I2C adapter
i2c-11 smbus SMBus PIIX4 adapter port 1 at 0b20 SMBus adapter
i2c-2 i2c AMDGPU DM i2c hw bus 0 I2C adapter
i2c-0 i2c Synopsys DesignWare I2C adapter I2C adapter
i2c-9 smbus SMBus PIIX4 adapter port 0 at 0b00 SMBus adapter
i2c-7 i2c AMDGPU DM aux hw bus 2 I2C adapter
i2c-5 i2c AMDGPU DM i2c hw bus 3 I2C adapter
Device is visible on address 0x2c (output when psmouse is loaded with
smbus_intertouch):
i2cdetect -q -y 11
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- 1c -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- UU -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
I can add this call
i2c_handle_smbus_host_notify(piix4_aux_adapter, 0x2c);
to end of piix4_transaction and i have working touchpad / trackpoint. I can
move, i can click and evhz reports rate 100Hz, which is much better than
39 with
PS/2 protocol. I know, this is endless loop, which generates on my
machine 2000
interrupts/s and it can break some features like sleep.
Current state is, that everything works with one exception - cursor moved
/ click interrupt. I don't know which interrupt / pin generates this event.
Now what i have tried:
Interrupt line can be retrieved using ACPI. More informations and links
to full
ACPI tables are here:
https://lore.kernel.org/all/CAPoEpV0ZSidL6aMXvB6LN1uS-3CUHS4ggT8RwFgmkzzCiYJ-XQ@mail.gmail.com/
I have added this code to end of piix_probe:
retval = devm_request_irq(&dev->dev, dev->irq, piix4_isr, IRQF_SHARED,
"piix4_smbus", piix4_aux_adapter);
if (!retval) {
printk(KERN_INFO "smbus Using irq %d\n", dev->irq);
}
else {
printk(KERN_INFO "smbus No irq %d\n", dev->irq);
}
PCI IRQ is set, because i have added it to PCI quirks (temporary hack).
Synaptics is connected to aux adaptor, i am registering irq wit aux adapter.
I have added InterruptEnable call (bit 0) in SMBUSx02 SMBusControl register
(register numbers are from AMD BKDG
- https://www.amd.com/en/support/tech-docs?keyword=bkdg):
unsigned short piix4_smba = 0xb20;
outb_p(0x01, (0x02 + piix4_smba));
Now i have tried to check SMBusStatus and SMBusSlaveStatus in interrupt
handler,
but they are not usable. First register is cleared directly in transfer
function, which is called before interrupt handler and second is always
zero. It
looks, that interrupt is triggered only after data transfer, but not for
host
notification event from slave.
I have added some print statements, to see, what happended. This code
dumps registers:
static void piix4_dump_registers(struct i2c_adapter *piix4_adapter, char
*label)
{
struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(piix4_adapter);
unsigned short piix4_smba = adapdata->smba;
int i;
u8 d[16];
for (i = 0; i < 16; ++i) {
if (i == 2 || i == 7)
d[i] = 0;
else
d[i] = inb_p(i + piix4_smba);
}
printk(KERN_INFO "smb registers: %s %02x%02x ...);
}
There are problems with reading form registers 2 and 7. It breaks
communication,
i don't know why.
Now this is interrupt handler:
static irqreturn_t piix4_isr(int irq, void *dev_id)
{
struct i2c_adapter *piix4_adapter = (struct i2c_adapter *)dev_id;
piix4_dump_registers(piix4_adapter, "isr ");
return IRQ_HANDLED;
}
I have added piix4_dump_register after transaction, but before clearing
status.
Output is on this link: https://pastebin.com/4mLBk0U7
After last line there is no output from RMI4/SMBus. Only this line has
set 0x0a
register (SMBusSlaveEvent) which looks like event from slave. This line is
generated after transaction, but not from interrupt handler. Interrupt
is not
called for slave events.
Now i have tried to enable interrupts from slave events. I have added
this code
to probe function (again, numeric addresses, but i can find numbers
faster in
reference documentation):
outb_p(0x80, (0x02 + piix4_smba)); // Reset to SMBusControl
outb_p(0x01, (0x02 + piix4_smba)); // InterruptEnable to SMBusControl
outb_p(inb_p(0x01 + piix4_smba) | 0x02, (0x01 + piix4_smba)); //
SlaveInit to SMBusSlaveStatus
outb_p(0x2c << 1, (0x04 + piix4_smba)); // write 0x2c address ?
outb_p(0xff, (0x0a + piix4_smba)); // enable all slave events
onSMBusSlaveEvent
outb_p(0xff, (0x0b + piix4_smba)); // enable all slave events
outb_p(inb_p(0x08 + piix4_smba) | 0x01, (0x08 + piix4_smba)); // SlaveEnable
outb_p(inb_p(0x08 + piix4_smba) | 0x08, (0x08 + piix4_smba)); //
SMBusAlertEnable
outb_p(inb_p(0x08 + piix4_smba) | 0x02, (0x08 + piix4_smba)); //
SMBusShadow1EN
outb_p(inb_p(0x08 + piix4_smba) | 0x04, (0x08 + piix4_smba)); //
SMBusShadow2EN
I have tried other combinations, but without success. This part of
documentation
looks like description of SMBus host notify:
SMBusShadow1En. Read-write. Reset: 0. Enable the generation of an
interrupt or
resume event upon an external SMBus master generating a transaction with an
address that matches the SMBus Shadow 1 register.
SlaveEnable. Read-write. Reset: 0. Enable the generation of an interrupt or
resume event upon an external SMBus master generating a transaction with an
address that matches the host controller slave port of 10h, a command
field that
matches the SMBus slave control register, and a match of corresponding
enabled
events.
I don't know how should i exactly interpret this part. I don't know what is
SMBus slave control register. It looks like this part is copied from PIIX4
documentation from intel
(https://www.intel.com/Assets/PDF/datasheet/290562.pdf), but without exact
description how matching works.
I have looked at other options how to retrieve interrupt, for example
amd_pinctl
GPIO. This looked promising:
cat /sys/kernel/debug/pinctrl/AMDI0030\:00/pingroups
registered pin groups:
group: i2c0
pin 145 (GPIO_145)
pin 146 (GPIO_146)
group: i2c1
pin 147 (GPIO_147)
pin 148 (GPIO_148)
group: i2c2
pin 113 (GPIO_113)
pin 114 (GPIO_114)
group: i2c3
pin 19 (GPIO_19)
pin 20 (GPIO_20)
Pins 19/20 are normally idle, but after loading psmouse with intertouch,
then
there is constant activity (i can capture cca 2000 evnets/s using gpiomon,
frequency is probably much higher). I don't know if this is usable, but
looks,
that this is i2c line from synaptics. I have not found interrupt pin.
On this link is output of gpiomon --num-events=5000 gpiochip0 19 20:
https://pastebin.com/B9XamDZA
This is everything, that i know. It thin, that i have forgotten some trivial
call, to unmask interrupt, but really, i don't know what. With working
interrupt, enabling RMI4 over piix4-smbus should be trivial.
> Summary of synaptics_intertouch problem on Thinkpad with Ryzen 5850U: A pity the threads are a bit mixed, but some more information about previous attempts can be found in this thread: https://lore.kernel.org/r/42c83ec8-bbac-85e2-9ab5-87e59a679f95@redhat.com > Problem with wrong base address is fixed using this patch: > https://lore.kernel.org/all/20210715221828.244536-1-Terry.Bowman@amd.com/ This patch is under discussion again.
Hello, i think, that SMBus works now pretty good and last problem is screaming interrupt from synaptics (1000 irq/s). I need little help to solve this problem. Little summary first: On this thinkpad is synaptics trackpoint/touchpad connected to PIIX4. To enable RMI4 mode, SMBus driver should support host notify protocol. I have added support of host notify and replaced active waiting transaction with completer + interrupt. Driver is now pretty stable and works way better, than old implementation. For example i2c-detect shows real devices (previous transaction code showed all addresses from 0x1c as active). Patch on following link is still hack, has hardcoded IRQ and supports host notifications and interrupts only on auxiliary port. I can implement other ports later. Patch: https://lore.kernel.org/all/c9b0b147-2907-ff41-4f13-464b3b891c50@wisdomtech.sk/ This patch includes PM register access using MMIO: https://lore.kernel.org/all/20210715221828.244536-1-Terry.Bowman@amd.com/ Now i can load psmouse synaptics_intertouch=1 and everything works great, but it uses 5% CPU and interrupt is called 1000/s. I have changed interrupt from rising edge to active low (it's PCIE, PCIE has active low) and i have many times checked if all interrupt bits are cleared in interrupt request. Yes, they are always cleared. Interrupts are generated only after first touch if i have compiled only F12. If i compile F03, then interrupts are generated immediately after load of psmouse. After unload, interrupts are not generated (i2c-piix4 still loaded). On this machine I2C is accessible using GPIO 19(SCL), 20(SDA). Using kernel thread with RT priority on isolated core i have tried to record pin values on GPIO pins. Latency is too high to record all transferred data. Some state changes are lost (approximately 1/50 bits). Not too low to read reliably all data, but good enough to see what happens at bus level. Here is recorded file: https://mireq.linuxos.sk/kernel/thinkpad_p14s/i2c_scl_sda.xz. Every byte is sample, first bit is SCL, second SDA. Sample rate is cca 500 000 Hz, but often drops under 100 000 (lost bit). On this screenshot is typical activity on bus: https://mireq.linuxos.sk/kernel/thinkpad_p14s/i2c_1.png (pulseview with imported raw file) Zoom to two packet is here: https://mireq.linuxos.sk/kernel/thinkpad_p14s/i2c_2.png First packet is SMBus host notify. Address 0x08 is SMBus host address and 0x58 is address of synaptics (0x2c << 1). Second packet is reading of interrupt status registers. Data 02 is length of interrupt status register (9 bits) and last 2 bytes are zero (idle, when moving cursor, then interrupt status register contains one bit set). Zoomed out: https://mireq.linuxos.sk/kernel/thinkpad_p14s/i2c_3.png Before transaction SMBus slave state machine is disabled and after transaction enabled. If notification is received when state machine is disabled, then device writes only address and don't get response. If driver runs with always enabled slave state machine, then output will contain only notify + read interrupt status pairs and no separate addresses, but with this mode bus collisions occur more often. Here is dmesg output: https://pastebin.com/RdDYHJn0 Cursor is moved until 2862.8, then i have not touched trackpoint. Idle device don't produce bus collisions. Moving cursor produces collisions, but sample rate is stable 100Hz, which is way better, than <40 Hz with PS/2 mode. I don't know how to solve collisions. Maybe they are related to not silenced host notifications. If i were to be optimistic, then i would say that clearing interrupt vector will solve all problems. According old RMI4 documentation, reading from interrupt status register should clear interrupts (status register is cleared), but this don't prevent device form sending host notifications. Maybe exists new way to disable interrupts. I don't know, i have no access to current documentation. My device has this signature: Synaptics, product: TM3471-030, fw id: 3418235 Any help welcome.
diff --git a/drivers/input/mouse/psmouse-smbus.c b/drivers/input/mouse/psmouse-smbus.c index a472489cc..6205f8d65 100644 --- a/drivers/input/mouse/psmouse-smbus.c +++ b/drivers/input/mouse/psmouse-smbus.c @@ -30,8 +30,8 @@ static void psmouse_smbus_check_adapter(struct i2c_adapter *adapter) { struct psmouse_smbus_dev *smbdev; - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_HOST_NOTIFY)) - return; + //if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_HOST_NOTIFY)) + // return; mutex_lock(&psmouse_smbus_mutex); @@ -196,8 +196,8 @@ static int psmouse_smbus_create_companion(struct device *dev, void *data) if (!adapter) return 0; - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_HOST_NOTIFY)) - return 0; + //if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_HOST_NOTIFY)) + // return 0; client = i2c_new_scanned_device(adapter, &smbdev->board, addr_list, NULL); diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index ffad14280..2f476dce7 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -1765,7 +1765,7 @@ static int synaptics_create_intertouch(struct psmouse *psmouse, }; const struct i2c_board_info intertouch_board = { I2C_BOARD_INFO("rmi4_smbus", 0x2c), - .flags = I2C_CLIENT_HOST_NOTIFY, + //.flags = I2C_CLIENT_HOST_NOTIFY, }; return psmouse_smbus_init(psmouse, &intertouch_board, diff --git a/drivers/input/rmi4/rmi_smbus.c b/drivers/input/rmi4/rmi_smbus.c index 2407ea43d..3eb7193b4 100644 --- a/drivers/input/rmi4/rmi_smbus.c +++ b/drivers/input/rmi4/rmi_smbus.c @@ -281,14 +281,17 @@ static int rmi_smb_probe(struct i2c_client *client, return -ENOMEM; } + //if (!i2c_check_functionality(client->adapter, + // I2C_FUNC_SMBUS_READ_BLOCK_DATA | + // I2C_FUNC_SMBUS_HOST_NOTIFY)) { if (!i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_READ_BLOCK_DATA | - I2C_FUNC_SMBUS_HOST_NOTIFY)) { + I2C_FUNC_SMBUS_READ_BLOCK_DATA)) { dev_err(&client->dev, "adapter does not support required functionality\n"); return -ENODEV; } + client->irq = 7; if (client->irq <= 0) { dev_err(&client->dev, "no IRQ provided, giving up\n"); return client->irq ? client->irq : -ENODEV;
On Thinkpad P14s gen 2 with AMD (model 21A00003CK, BIOS R1MET43W - 1.13) SMBus address detection don't work and trackpoint has slow rate (30 Hz) because can't use SMBus. Email is divided to SMBus and trackpoint section, there are issues in both modules. I am using amd-pstate-dev-v5 branch of kernel, but problem is in all versions. SMBUS ===== After inserting i2c_piix4 i have address 0xff00 / 0xff20 in log, but correct address is 0xb20: [ 0.349576] ACPI: \_SB_.PCI0.SMB1: Unsupported CMI method: _STA [ 0.349629] piix4_smbus 0000:00:14.0: Using IRQ for SMBus [ 0.349630] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xff00, revision 15 [ 0.349632] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 0.349652] i2c_dev: adapter [SMBus PIIX4 adapter port 0 at ff00] registered as minor 2 [ 0.349658] i2c i2c-2: adapter [SMBus PIIX4 adapter port 0 at ff00] registered [ 0.349702] i2c_dev: adapter [SMBus PIIX4 adapter port 2 at ff00] registered as minor 3 [ 0.349705] i2c i2c-3: adapter [SMBus PIIX4 adapter port 2 at ff00] registered [ 0.349720] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xff20 [ 0.349734] i2c_dev: adapter [SMBus PIIX4 adapter port 1 at ff20] registered as minor 4 [ 0.349737] i2c i2c-4: adapter [SMBus PIIX4 adapter port 1 at ff20] registered Here is relevant section of ACPI DSDT: Scope (_SB.PCI0) { Device (SMB1) { Name (_HID, "SMB0001") // _HID: Hardware ID Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { IO (Decode16, 0x0B20, // Range Minimum 0x0B20, // Range Maximum 0x20, // Alignment 0x20, // Length ) IRQ (Level, ActiveLow, Shared, ) {7} }) Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } } Here is SMBus section of lspci: # lspci -vvv -b -x -nn -PP -P -s 00:14.0 00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 51) Subsystem: Lenovo FCH SMBus Controller [17aa:5094] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- IOMMU group: 9 Kernel driver in use: piix4_smbus Kernel modules: i2c_piix4, sp5100_tco 00: 22 10 0b 79 00 04 20 02 51 00 05 0c 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 94 50 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Command i2cdetect -q -y 4 don't detect anything and log contains this messages: [ 813.156253] i2c i2c-9: Transaction (pre): CNT=ff, CMD=ff, ADD=ff, DAT0=ff, DAT1=ff [ 813.156259] i2c i2c-9: SMBus busy (ff). Resetting... [ 813.156265] i2c i2c-9: Failed! (ff) [ 813.156272] i2c i2c-9: Probing failed, no device found I tried to temporary fix problem on my machine. Relevant function is piix4_setup_sb800 in drivers/i2c/buses/i2c-piix4.c. I have added debug messages and changed address in this function. smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1); outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX); smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1); + printk(KERN_INFO "piix4 smba_en_lo %u", smba_en_lo); + printk(KERN_INFO "piix4 smba_en_hi %u", smba_en_hi); + smba_en_hi = 0x0b; ... + printk(KERN_INFO "piix4 irq %d", PIIX4_dev->irq); + printk(KERN_INFO "piix4 i2ccfg %u", i2ccfg); Then log looks like this: [ 0.809897] piix4 smba_en_lo 255 [ 0.809899] piix4 smba_en_hi 255 [ 0.811592] piix4 irq 0 [ 0.811594] piix4 i2ccfg 4 [ 0.811595] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 0.811598] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 0.822338] piix4 smba_en_lo 255 [ 0.822340] piix4 smba_en_hi 255 [ 0.822345] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 And touchpad / trackpoint is detected: # i2cdetect -q -y 4 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- 1c -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- 2c 2d 2e 2f 30: 30 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40: 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50: 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f 60: 60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f 70: 70 71 72 73 74 75 76 77 Trackpoint (RMI4) ================= SMBus is now working (probably). Without any module parameters i have this output: psmouse serio1: synaptics: Your touchpad (PNP: LEN2073 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. When i try with synaptics_intertouch=1 i have this in dmesg: psmouse serio1: synaptics: Trying to set up SMBus access psmouse serio1: synaptics: SMbus companion is not ready yet I have disabled I2C_FUNC_SMBUS_HOST_NOTIFY checks in psmouse-smbus.c, synaptics.c and rmi_smbus.c. Module i2c_piix4 dont export I2C_FUNC_SMBUS_HOST_NOTIFY. Exact changes are: Now i have working trackpoint. It's not reliable. Sometimes it's generating keyboard events instead mouse events, sometimes starts working for cca 1 second after first move and then stops (no IRQs are generated), sometimes dmesg contains many "Failed to read irq" messages. [ 2.058579] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4694] [ 2.092853] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..] [ 2.092855] psmouse serio1: synaptics: Trying to set up SMBus access [ 2.116391] rmi4_smbus 4-002c: registering SMbus-connected sensor [ 2.186473] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM3471-030, fw id: 3418235 [ 2.226009] input: Synaptics TM3471-030 as /devices/rmi4-00/input/input54 [ 2.239455] serio: RMI4 PS/2 pass-through port at rmi4-00.fn03 [ 2.347012] psmouse serio2: trackpoint: Elan TrackPoint firmware: 0x12, buttons: 3/3 [ 2.388030] input: TPPS/2 Elan TrackPoint as /devices/rmi4-00/rmi4-00.fn03/serio2/input/input55 [ 1507.883750] rmi4_physical rmi4-00: Failed to read irqs, code=-5 [ 3263.258033] rmi4_physical rmi4-00: Failed to read irqs, code=-5 [ 3263.258587] rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-5). [ 3263.259036] rmi4_physical rmi4-00: Failed to read irqs, code=-6 [ 3263.259579] rmi4_physical rmi4-00: Failed to read irqs, code=-6 [ 3263.267027] rmi4_physical rmi4-00: Failed to read irqs, code=-5 [ 3263.267581] rmi4_f01 rmi4-00.fn01: Failed to write sleep mode: -5. [ 3263.267582] rmi4_f01 rmi4-00.fn01: Suspend failed with code -5. Changes needed to fix issues ============================ Address detection in piix4 is really broken for this machine. I don't know how to fix this, without breaking detection on other machines. I think, that piix4 should implement I2C_FUNC_SMBUS_HOST_NOTIFY like i2c-i801. Or rmi4 can be reliably enabled without I2C_FUNC_SMBUS_HOST_NOTIFY, just using irq? If bus access is fixed, then should be LEN2073 whitelisted for SMBus access. Files ===== Kernel config - https://mireq.linuxos.sk/kernel/p14s_gen2_amd_kernel_config ACPI tables - https://mireq.linuxos.sk/kernel/p14s_gen2_amd_acpi_tables.tar.xz My really really dangerous changes - https://mireq.linuxos.sk/kernel/p14s_gen2_amd_smbus.patch