diff mbox series

[RESEND,v3,4/4] arm: kirkwood: Pogoplug V4 : Add board include header and defconfig files

Message ID 20220120002835.21877-5-mibodhi@gmail.com
State Superseded
Delegated to: Stefan Roese
Headers show
Series arm: kirkwood: Add support for Pogoplug V4 | expand

Commit Message

Tony Dinh Jan. 20, 2022, 12:28 a.m. UTC 
Add board include header and defconfig files for Pogoplug V4

Signed-off-by: Tony Dinh <mibodhi@gmail.com>
---

Changes in v3:
- Migrate config symbols from board include header to defconfig
- Remove obsolete config symbols from header file
- Don't use ifdefs for unselectable config symbols in header file

Changes in v2:
- Use canonical format for defconfig file

 configs/pogo_v4_defconfig | 79 +++++++++++++++++++++++++++++++++++++++
 include/configs/pogo_v4.h | 56 +++++++++++++++++++++++++++
 2 files changed, 135 insertions(+)
 create mode 100644 configs/pogo_v4_defconfig
 create mode 100644 include/configs/pogo_v4.h

Comments

Stefan Roese Jan. 20, 2022, 11:55 a.m. UTC | #1 
Hi Tony,

On 1/20/22 01:28, Tony Dinh wrote:
> Add board include header and defconfig files for Pogoplug V4
> 
> Signed-off-by: Tony Dinh <mibodhi@gmail.com>
> ---
> 
> Changes in v3:
> - Migrate config symbols from board include header to defconfig
> - Remove obsolete config symbols from header file
> - Don't use ifdefs for unselectable config symbols in header file
> 
> Changes in v2:
> - Use canonical format for defconfig file
> 
>   configs/pogo_v4_defconfig | 79 +++++++++++++++++++++++++++++++++++++++
>   include/configs/pogo_v4.h | 56 +++++++++++++++++++++++++++
>   2 files changed, 135 insertions(+)
>   create mode 100644 configs/pogo_v4_defconfig
>   create mode 100644 include/configs/pogo_v4.h
> 
> diff --git a/configs/pogo_v4_defconfig b/configs/pogo_v4_defconfig
> new file mode 100644
> index 0000000000..5490067b9e
> --- /dev/null
> +++ b/configs/pogo_v4_defconfig
> @@ -0,0 +1,79 @@
> +CONFIG_ARM=y
> +CONFIG_SKIP_LOWLEVEL_INIT=y
> +CONFIG_SYS_DCACHE_OFF=y
> +CONFIG_ARCH_CPU_INIT=y
> +CONFIG_SYS_THUMB_BUILD=y
> +CONFIG_ARCH_KIRKWOOD=y
> +CONFIG_SYS_KWD_CONFIG="board/cloudengines/pogo_v4/kwbimage.cfg"
> +CONFIG_SYS_TEXT_BASE=0x600000
> +CONFIG_TARGET_POGO_V4=y
> +CONFIG_ENV_SIZE=0x20000
> +CONFIG_ENV_OFFSET=0xC0000
> +CONFIG_DEFAULT_DEVICE_TREE="kirkwood-pogoplug-series-4"
> +CONFIG_IDENT_STRING="\nPogoplug V4"
> +CONFIG_SYS_LOAD_ADDR=0x800000
> +CONFIG_BOOTSTAGE=y
> +CONFIG_SHOW_BOOT_PROGRESS=y
> +CONFIG_BOOTDELAY=10
> +CONFIG_USE_BOOTCOMMAND=y
> +CONFIG_BOOTCOMMAND="setenv bootargs ${bootargs_console}; run bootcmd_usb; bootm 0x00800000 0x01100000 0x2c00000"
> +CONFIG_USE_PREBOOT=y
> +CONFIG_BOARD_LATE_INIT=y
> +CONFIG_HUSH_PARSER=y
> +CONFIG_SYS_PROMPT="Pogo_V4> "
> +CONFIG_CMD_BOOTZ=y
> +# CONFIG_BOOTM_PLAN9 is not set
> +# CONFIG_BOOTM_RTEMS is not set
> +# CONFIG_BOOTM_VXWORKS is not set
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_MTD=y
> +CONFIG_CMD_NAND=y
> +CONFIG_CMD_PCI=y
> +CONFIG_CMD_SATA=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_MII=y
> +CONFIG_CMD_PING=y
> +CONFIG_CMD_SNTP=y
> +CONFIG_CMD_DNS=y
> +CONFIG_CMD_EXT2=y
> +CONFIG_CMD_EXT4=y
> +CONFIG_CMD_FAT=y
> +CONFIG_CMD_FS_GENERIC=y
> +CONFIG_CMD_JFFS2=y
> +CONFIG_CMD_MTDPARTS=y
> +CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
> +CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)"
> +CONFIG_CMD_UBI=y
> +CONFIG_ISO_PARTITION=y
> +CONFIG_EFI_PARTITION=y
> +CONFIG_PARTITION_TYPE_GUID=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_ENV_OVERWRITE=y
> +CONFIG_ENV_IS_IN_NAND=y
> +CONFIG_VERSION_VARIABLE=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_NETCONSOLE=y
> +CONFIG_DM=y
> +CONFIG_SATA_MV=y
> +CONFIG_KIRKWOOD_GPIO=y
> +# CONFIG_MMC_HW_PARTITIONING is not set
> +CONFIG_MVEBU_MMC=y
> +CONFIG_MTD=y
> +CONFIG_MTD_RAW_NAND=y
> +CONFIG_DM_ETH=y
> +CONFIG_MVGBE=y
> +CONFIG_MII=y
> +CONFIG_PCI=y
> +CONFIG_PCI_MVEBU=y
> +CONFIG_DM_RTC=y
> +CONFIG_RTC_EMULATION=y
> +CONFIG_SYS_NS16550=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_PCI=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_JFFS2_LZO=y
> +CONFIG_JFFS2_NAND=y
> diff --git a/include/configs/pogo_v4.h b/include/configs/pogo_v4.h
> new file mode 100644
> index 0000000000..d94d49505a
> --- /dev/null
> +++ b/include/configs/pogo_v4.h
> @@ -0,0 +1,56 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright (C) 2014-2022 Tony Dinh <mibodhi@gmail.com>
> + *
> + * Based on
> + * Copyright (C) 2012
> + * David Purdy <david.c.purdy@gmail.com>
> + *
> + * Based on Kirkwood support:
> + * (C) Copyright 2009
> + * Marvell Semiconductor <www.marvell.com>
> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
> + */
> +
> +#ifndef _CONFIG_POGO_V4_H
> +#define _CONFIG_POGO_V4_H
> +
> +/*
> + * mv-common.h should be defined after CMD configs since it used them
> + * to enable certain macros
> + */
> +#include "mv-common.h"
> +
> +/*
> + * Default environment variables
> + */
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> +	"dtb_file=/boot/dts/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
> +	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"\
> +	"mtdids=nand0=orion_nand\0"\
> +	"bootargs_console=console=ttyS0,115200\0" \
> +	"bootcmd_usb=usb start; load usb 0:1 0x00800000 /boot/uImage; " \
> +	"load usb 0:1 0x01100000 /boot/uInitrd; " \
> +	"load usb 0:1 0x2c00000 $dtb_file\0"
> +
> +/*
> + * Ethernet Driver configuration
> + */
> +#ifdef CONFIG_CMD_NET

Will this ever be build without CONFIG_CMD_NET? If not, then please
remove the #ifdef here as well.

> +#define CONFIG_FEATURE_COMMAND_EDITING	/* for netconsole */

And here the main problem:

[stefan@ryzen u-boot-marvell (master)]$ make pogo_v4_defconfig
#
# configuration written to .config
#
[stefan@ryzen u-boot-marvell (master)]$ make -s -j20
===================== WARNING ======================
This board does not use CONFIG_TIMER (Driver Model
for Timer drivers). Please update the board to use
CONFIG_TIMER before the v2023.01 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================
Error: You must add new CONFIG options using Kconfig
The following new ad-hoc CONFIG options were detected:
CONFIG_FEATURE_COMMAND_EDITING

Please add these via Kconfig instead. Find a suitable Kconfig
file and add a 'config' or 'menuconfig' option.
make: *** [Makefile:1111: .binman_stamp] Error 1
make: *** Deleting file '.binman_stamp'
make: *** Waiting for unfinished jobs....

So please move this to Kconfig or remove it completely if not needed.

Thanks,
Stefan
Tony Dinh Jan. 20, 2022, 9:58 p.m. UTC | #2 
Hi Stefan,

On Thu, Jan 20, 2022 at 3:55 AM Stefan Roese <sr@denx.de> wrote:
>
> Hi Tony,
>
> On 1/20/22 01:28, Tony Dinh wrote:
> > Add board include header and defconfig files for Pogoplug V4
> >
> > Signed-off-by: Tony Dinh <mibodhi@gmail.com>
> > ---
> >
> > Changes in v3:
> > - Migrate config symbols from board include header to defconfig
> > - Remove obsolete config symbols from header file
> > - Don't use ifdefs for unselectable config symbols in header file
> >
> > Changes in v2:
> > - Use canonical format for defconfig file
> >
> >   configs/pogo_v4_defconfig | 79 +++++++++++++++++++++++++++++++++++++++
> >   include/configs/pogo_v4.h | 56 +++++++++++++++++++++++++++
> >   2 files changed, 135 insertions(+)
> >   create mode 100644 configs/pogo_v4_defconfig
> >   create mode 100644 include/configs/pogo_v4.h
> >
> > diff --git a/configs/pogo_v4_defconfig b/configs/pogo_v4_defconfig
> > new file mode 100644
> > index 0000000000..5490067b9e
> > --- /dev/null
> > +++ b/configs/pogo_v4_defconfig
> > @@ -0,0 +1,79 @@
> > +CONFIG_ARM=y
> > +CONFIG_SKIP_LOWLEVEL_INIT=y
> > +CONFIG_SYS_DCACHE_OFF=y
> > +CONFIG_ARCH_CPU_INIT=y
> > +CONFIG_SYS_THUMB_BUILD=y
> > +CONFIG_ARCH_KIRKWOOD=y
> > +CONFIG_SYS_KWD_CONFIG="board/cloudengines/pogo_v4/kwbimage.cfg"
> > +CONFIG_SYS_TEXT_BASE=0x600000
> > +CONFIG_TARGET_POGO_V4=y
> > +CONFIG_ENV_SIZE=0x20000
> > +CONFIG_ENV_OFFSET=0xC0000
> > +CONFIG_DEFAULT_DEVICE_TREE="kirkwood-pogoplug-series-4"
> > +CONFIG_IDENT_STRING="\nPogoplug V4"
> > +CONFIG_SYS_LOAD_ADDR=0x800000
> > +CONFIG_BOOTSTAGE=y
> > +CONFIG_SHOW_BOOT_PROGRESS=y
> > +CONFIG_BOOTDELAY=10
> > +CONFIG_USE_BOOTCOMMAND=y
> > +CONFIG_BOOTCOMMAND="setenv bootargs ${bootargs_console}; run bootcmd_usb; bootm 0x00800000 0x01100000 0x2c00000"
> > +CONFIG_USE_PREBOOT=y
> > +CONFIG_BOARD_LATE_INIT=y
> > +CONFIG_HUSH_PARSER=y
> > +CONFIG_SYS_PROMPT="Pogo_V4> "
> > +CONFIG_CMD_BOOTZ=y
> > +# CONFIG_BOOTM_PLAN9 is not set
> > +# CONFIG_BOOTM_RTEMS is not set
> > +# CONFIG_BOOTM_VXWORKS is not set
> > +# CONFIG_CMD_FLASH is not set
> > +CONFIG_CMD_MMC=y
> > +CONFIG_CMD_MTD=y
> > +CONFIG_CMD_NAND=y
> > +CONFIG_CMD_PCI=y
> > +CONFIG_CMD_SATA=y
> > +CONFIG_CMD_USB=y
> > +CONFIG_CMD_DHCP=y
> > +CONFIG_CMD_MII=y
> > +CONFIG_CMD_PING=y
> > +CONFIG_CMD_SNTP=y
> > +CONFIG_CMD_DNS=y
> > +CONFIG_CMD_EXT2=y
> > +CONFIG_CMD_EXT4=y
> > +CONFIG_CMD_FAT=y
> > +CONFIG_CMD_FS_GENERIC=y
> > +CONFIG_CMD_JFFS2=y
> > +CONFIG_CMD_MTDPARTS=y
> > +CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
> > +CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)"
> > +CONFIG_CMD_UBI=y
> > +CONFIG_ISO_PARTITION=y
> > +CONFIG_EFI_PARTITION=y
> > +CONFIG_PARTITION_TYPE_GUID=y
> > +CONFIG_OF_CONTROL=y
> > +CONFIG_ENV_OVERWRITE=y
> > +CONFIG_ENV_IS_IN_NAND=y
> > +CONFIG_VERSION_VARIABLE=y
> > +CONFIG_NET_RANDOM_ETHADDR=y
> > +CONFIG_NETCONSOLE=y
> > +CONFIG_DM=y
> > +CONFIG_SATA_MV=y
> > +CONFIG_KIRKWOOD_GPIO=y
> > +# CONFIG_MMC_HW_PARTITIONING is not set
> > +CONFIG_MVEBU_MMC=y
> > +CONFIG_MTD=y
> > +CONFIG_MTD_RAW_NAND=y
> > +CONFIG_DM_ETH=y
> > +CONFIG_MVGBE=y
> > +CONFIG_MII=y
> > +CONFIG_PCI=y
> > +CONFIG_PCI_MVEBU=y
> > +CONFIG_DM_RTC=y
> > +CONFIG_RTC_EMULATION=y
> > +CONFIG_SYS_NS16550=y
> > +CONFIG_USB=y
> > +CONFIG_USB_XHCI_HCD=y
> > +CONFIG_USB_XHCI_PCI=y
> > +CONFIG_USB_EHCI_HCD=y
> > +CONFIG_USB_STORAGE=y
> > +CONFIG_JFFS2_LZO=y
> > +CONFIG_JFFS2_NAND=y
> > diff --git a/include/configs/pogo_v4.h b/include/configs/pogo_v4.h
> > new file mode 100644
> > index 0000000000..d94d49505a
> > --- /dev/null
> > +++ b/include/configs/pogo_v4.h
> > @@ -0,0 +1,56 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * Copyright (C) 2014-2022 Tony Dinh <mibodhi@gmail.com>
> > + *
> > + * Based on
> > + * Copyright (C) 2012
> > + * David Purdy <david.c.purdy@gmail.com>
> > + *
> > + * Based on Kirkwood support:
> > + * (C) Copyright 2009
> > + * Marvell Semiconductor <www.marvell.com>
> > + * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
> > + */
> > +
> > +#ifndef _CONFIG_POGO_V4_H
> > +#define _CONFIG_POGO_V4_H
> > +
> > +/*
> > + * mv-common.h should be defined after CMD configs since it used them
> > + * to enable certain macros
> > + */
> > +#include "mv-common.h"
> > +
> > +/*
> > + * Default environment variables
> > + */
> > +#define CONFIG_EXTRA_ENV_SETTINGS \
> > +     "dtb_file=/boot/dts/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
> > +     "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"\
> > +     "mtdids=nand0=orion_nand\0"\
> > +     "bootargs_console=console=ttyS0,115200\0" \
> > +     "bootcmd_usb=usb start; load usb 0:1 0x00800000 /boot/uImage; " \
> > +     "load usb 0:1 0x01100000 /boot/uInitrd; " \
> > +     "load usb 0:1 0x2c00000 $dtb_file\0"
> > +
> > +/*
> > + * Ethernet Driver configuration
> > + */
> > +#ifdef CONFIG_CMD_NET
>
> Will this ever be build without CONFIG_CMD_NET? If not, then please
> remove the #ifdef here as well.
>
> > +#define CONFIG_FEATURE_COMMAND_EDITING       /* for netconsole */
>
> And here the main problem:
>
> [stefan@ryzen u-boot-marvell (master)]$ make pogo_v4_defconfig
> #
> # configuration written to .config
> #
> [stefan@ryzen u-boot-marvell (master)]$ make -s -j20
> ===================== WARNING ======================
> This board does not use CONFIG_TIMER (Driver Model
> for Timer drivers). Please update the board to use
> CONFIG_TIMER before the v2023.01 release. Failure to
> update by the deadline may result in board removal.
> See doc/driver-model/migration.rst for more info.
> ====================================================
> Error: You must add new CONFIG options using Kconfig
> The following new ad-hoc CONFIG options were detected:
> CONFIG_FEATURE_COMMAND_EDITING
>
> Please add these via Kconfig instead. Find a suitable Kconfig
> file and add a 'config' or 'menuconfig' option.
> make: *** [Makefile:1111: .binman_stamp] Error 1
> make: *** Deleting file '.binman_stamp'
> make: *** Waiting for unfinished jobs....
>
> So please move this to Kconfig or remove it completely if not needed.

Sorry about that. Pretty strange that it built fine in my tree
(tracking master). I did not see the error. I also use Tom's script to
check for unmigrate symbols. And this CONFIG_FEATURE_COMMAND_EDITING
did not show up on the list. The script is from this post:

https://lists.denx.de/pipermail/u-boot/2021-September/460085.html

I'll remove it for now.

Thanks,
Tony

> Thanks,
> Stefan
diff mbox series

Patch

diff --git a/configs/pogo_v4_defconfig b/configs/pogo_v4_defconfig
new file mode 100644
index 0000000000..5490067b9e
--- /dev/null
+++ b/configs/pogo_v4_defconfig
@@ -0,0 +1,79 @@ 
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SYS_DCACHE_OFF=y
+CONFIG_ARCH_CPU_INIT=y
+CONFIG_SYS_THUMB_BUILD=y
+CONFIG_ARCH_KIRKWOOD=y
+CONFIG_SYS_KWD_CONFIG="board/cloudengines/pogo_v4/kwbimage.cfg"
+CONFIG_SYS_TEXT_BASE=0x600000
+CONFIG_TARGET_POGO_V4=y
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_OFFSET=0xC0000
+CONFIG_DEFAULT_DEVICE_TREE="kirkwood-pogoplug-series-4"
+CONFIG_IDENT_STRING="\nPogoplug V4"
+CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_BOOTSTAGE=y
+CONFIG_SHOW_BOOT_PROGRESS=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="setenv bootargs ${bootargs_console}; run bootcmd_usb; bootm 0x00800000 0x01100000 0x2c00000"
+CONFIG_USE_PREBOOT=y
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="Pogo_V4> "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SATA=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_JFFS2=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)"
+CONFIG_CMD_UBI=y
+CONFIG_ISO_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
+CONFIG_DM=y
+CONFIG_SATA_MV=y
+CONFIG_KIRKWOOD_GPIO=y
+# CONFIG_MMC_HW_PARTITIONING is not set
+CONFIG_MVEBU_MMC=y
+CONFIG_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_DM_ETH=y
+CONFIG_MVGBE=y
+CONFIG_MII=y
+CONFIG_PCI=y
+CONFIG_PCI_MVEBU=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_EMULATION=y
+CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_NAND=y
diff --git a/include/configs/pogo_v4.h b/include/configs/pogo_v4.h
new file mode 100644
index 0000000000..d94d49505a
--- /dev/null
+++ b/include/configs/pogo_v4.h
@@ -0,0 +1,56 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014-2022 Tony Dinh <mibodhi@gmail.com>
+ *
+ * Based on
+ * Copyright (C) 2012
+ * David Purdy <david.c.purdy@gmail.com>
+ *
+ * Based on Kirkwood support:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#ifndef _CONFIG_POGO_V4_H
+#define _CONFIG_POGO_V4_H
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"dtb_file=/boot/dts/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"\
+	"mtdids=nand0=orion_nand\0"\
+	"bootargs_console=console=ttyS0,115200\0" \
+	"bootcmd_usb=usb start; load usb 0:1 0x00800000 /boot/uImage; " \
+	"load usb 0:1 0x01100000 /boot/uInitrd; " \
+	"load usb 0:1 0x2c00000 $dtb_file\0"
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_FEATURE_COMMAND_EDITING	/* for netconsole */
+#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
+#define CONFIG_PHY_BASE_ADR	0
+#endif /* CONFIG_CMD_NET */
+
+/*
+ *  SATA Driver configuration
+ */
+#define CONFIG_SYS_SATA_MAX_DEVICE	1
+
+/*
+ * Support large disk for SATA and USB
+ */
+#define CONFIG_SYS_64BIT_LBA
+#define CONFIG_LBA48
+
+#endif /* _CONFIG_POGO_V4_H */