diff mbox series

[v6,1/2] BZ #17645, fix slow DSO sorting behavior in dynamic loader -- Testing infrastructure

Message ID bf24fd60-693c-4ac8-d84d-f1be69677351@codesourcery.com
State New
Headers show
Series [v6,1/2] BZ #17645, fix slow DSO sorting behavior in dynamic loader -- Testing infrastructure | expand

Commit Message

Chung-Lin Tang July 20, 2021, 2:24 p.m. UTC
Hi Florian,
Apologies again for delaying so long to update this. This is v6 of the DSO sorting algorithms patch set.

On the testing infrastructure patch here, v6 adds:

1) Several bug-fixes, mainly on main program command string processing.

2) soname support:
    We can now describe something like this:

    {}->a->b->c;soname({})=c

    Which assigns 'c' as the soname of the main program, to facilitate such a behavior test.
    I'll talk about the issues of how the new algorithm handles this in the 2nd patch.

3) xtests support:
    There is now xtest support in the dso-ordering-test.py tool. To add a new test to 'xtests-special',
    declare the test using 'xtest(<test-name>): <description-strings>...'

    This is now used on the tst-redhat-1162810 testcase defined in elf/dso-sort-tests-2.def, which you
    mentioned was taking too long for one single testcase. The run using the new algorithm should be
    instantaneous, though the old algorithm is expected to timeout.

    However, since the test-run-command tool is already curbing the testcase execution at 20 seconds
    timeout, the actual execution part of the testcase isn't really that much of a culprit.
    The larger factor is the large number of DSOs built as part of the test, which elf/Makefile
    always builds. (open to suggestions on how to better control this part)
    On my machine, and not using PARALLELMFLAGS to test, the "make check" time still increases about
    40+ seconds even with tst-redhat-1162810 placed in xtests.

    So it slightly helps, but not by much to alleviate the testing time increase. I hope this is
    enough for now.

Thanks,
Chung-Lin

2021-07-20  Chung-Lin Tang  <cltang@codesourcery.com>

	[BZ #17645]
	[BZ #15311]
	[BZ #15310]
	* elf/Makefile (include_dsosort_tests): New make function. Use
	to process duo-sort-tests-[12].def files.
	* dso-sort-tests-1.def: New file with test descriptions.
	* dso-sort-tests-2.def: New file with test descriptions.
	* scripts/dso-ordering-test.py: New script.

	* support/Makefile: Add settings for building 'test-run-command' utility.
	* support/Depend: New depend file.
	* support/support_test_main.c (run_test_function): Use execv() to launch
	argv contents as command if in run-command-mode.
	* support/test-driver.h (struct test_config): Add char run_command_mode'
	field.
	* support/test-driver.c (main): Set test_config.run_command_mode = 1 if
	RUN_COMMAND_MODE macro defined.
	* support/test-run-command.c: New file, defines RUN_COMMAND_MODE macro
	and includes test-driver.c.

Comments

Adhemerval Zanella Netto Aug. 10, 2021, 6:05 p.m. UTC | #1
On 20/07/2021 11:24, Chung-Lin Tang wrote:
> Hi Florian,
> Apologies again for delaying so long to update this. This is v6 of the DSO sorting algorithms patch set.

Hi Chung-Lin,

I will try to help move this forward, this is being on review for a long
time and it is a really good improvement.

> 
> On the testing infrastructure patch here, v6 adds:
> 
> 1) Several bug-fixes, mainly on main program command string processing.
> 
> 2) soname support:
>    We can now describe something like this:
> 
>    {}->a->b->c;soname({})=c
> 
>    Which assigns 'c' as the soname of the main program, to facilitate such a behavior test.
>    I'll talk about the issues of how the new algorithm handles this in the 2nd patch.
> 
> 3) xtests support:
>    There is now xtest support in the dso-ordering-test.py tool. To add a new test to 'xtests-special',
>    declare the test using 'xtest(<test-name>): <description-strings>...'
> 
>    This is now used on the tst-redhat-1162810 testcase defined in elf/dso-sort-tests-2.def, which you
>    mentioned was taking too long for one single testcase. The run using the new algorithm should be
>    instantaneous, though the old algorithm is expected to timeout.
> 
>    However, since the test-run-command tool is already curbing the testcase execution at 20 seconds
>    timeout, the actual execution part of the testcase isn't really that much of a culprit.
>    The larger factor is the large number of DSOs built as part of the test, which elf/Makefile
>    always builds. (open to suggestions on how to better control this part)
>    On my machine, and not using PARALLELMFLAGS to test, the "make check" time still increases about
>    40+ seconds even with tst-redhat-1162810 placed in xtests.
> 
>    So it slightly helps, but not by much to alleviate the testing time increase. I hope this is
>    enough for now.

Touching both elf/dso-sort-tests-1.def and elf/dso-sort-tests-2.def
takes 5.7s (42s user) on 'make elf/tests -j24 run-built-tests=yes'
on my system (5900X, 12c).  I think it should be ok even on slower
machines.

The test script is quite complex, but I double check some rules
created from .def file and there matching of test expects.

The patch look good, some minor issues regarding style (double space
after period), a minor restructure on dso-ordering-test.py, to move 
a regression test to subsequent patch., and to remove an unrequired
handling of libdl.

Reviewed-by: Adhemerval Zanella  <adhemerval.zanella@linaro.org>

> 
> Thanks,
> Chung-Lin
> 
> 2021-07-20  Chung-Lin Tang  <cltang@codesourcery.com>
> 
>     [BZ #17645]
>     [BZ #15311]
>     [BZ #15310]
>     * elf/Makefile (include_dsosort_tests): New make function. Use
>     to process duo-sort-tests-[12].def files.
>     * dso-sort-tests-1.def: New file with test descriptions.
>     * dso-sort-tests-2.def: New file with test descriptions.
>     * scripts/dso-ordering-test.py: New script.
> 
>     * support/Makefile: Add settings for building 'test-run-command' utility.
>     * support/Depend: New depend file.
>     * support/support_test_main.c (run_test_function): Use execv() to launch
>     argv contents as command if in run-command-mode.
>     * support/test-driver.h (struct test_config): Add char run_command_mode'
>     field.
>     * support/test-driver.c (main): Set test_config.run_command_mode = 1 if
>     RUN_COMMAND_MODE macro defined.
>     * support/test-run-command.c: New file, defines RUN_COMMAND_MODE macro
>     and includes test-driver.c.

No need to provide a ChangeLog, we prefer now a descripton of the patch
itself (the CL are now auto-generated at release).


> diff --git a/elf/Makefile b/elf/Makefile
> index 4fe60947ad..fe7a8b418f 100644
> --- a/elf/Makefile
> +++ b/elf/Makefile
> @@ -469,6 +469,21 @@ tests-special += $(objpfx)order-cmp.out $(objpfx)tst-array1-cmp.out \
>  		 $(objpfx)tst-unused-dep-cmp.out
>  endif
>  
> +# DSO sorting tests:
> +# The dso-ordering-test.py script generates testcase source files in $(objpfx),
> +# creating a $(objpfx)<testcase-name>-dir for each testcase, and creates a
> +# Makefile fragment to be included.
> +define include_dsosort_tests
> +$(objpfx)$(1).generated-makefile: $(1)
> +	$(PYTHON) $(..)scripts/dso-ordering-test.py \
> +	--description-file $$< --objpfx $(objpfx) --output-makefile $$@
> +include $(objpfx)$(1).generated-makefile
> +endef
> +
> +# Generate from each testcase description file
> +$(eval $(call include_dsosort_tests,dso-sort-tests-1.def))
> +$(eval $(call include_dsosort_tests,dso-sort-tests-2.def))
> +
>  check-abi: $(objpfx)check-abi-ld.out
>  tests-special += $(objpfx)check-abi-ld.out
>  update-abi: update-abi-ld

Ok.

> diff --git a/elf/dso-sort-tests-1.def b/elf/dso-sort-tests-1.def
> new file mode 100644
> index 0000000000..51f1d2e158
> --- /dev/null
> +++ b/elf/dso-sort-tests-1.def
> @@ -0,0 +1,66 @@
> +# DSO sorting test descriptions.
> +# This file is to be processed by ../scripts/dso-ordering-test.py, see usage
> +# in elf/Makefile for how it is executed.
> +
> +# We test both dynamic loader sorting algorithms
> +tunable_option: glibc.rtld.dynamic_sort=1
> +tunable_option: glibc.rtld.dynamic_sort=2
> +
> +# Sequence of single dependencies with no cycles.
> +tst-dso-ordering1: a->b->c
> +output: c>b>a>{}<a<b<c
> +
> +# Sequence including 2 dependent DSOs not at the end of the graph.
> +tst-dso-ordering2: a->b->[cd]->e
> +output: e>d>c>b>a>{}<a<b<c<d<e
> +
> +# Complex order with 3 "layers" of full dependencies
> +tst-dso-ordering3: a->[bc]->[def]->[gh]->i
> +output: i>h>g>f>e>d>c>b>a>{}<a<b<c<d<e<f<g<h<i
> +
> +# Sequence including 2 dependent DSOs at the end of the graph.
> +# Additionally the same dependencies appear in two paths.
> +tst-dso-ordering4: a->b->[de];a->c->d->e
> +output: e>d>c>b>a>{}<a<b<c<d<e
> +
> +# Test that b->c cross link is respected correctly
> +tst-dso-ordering5: a!->[bc]->d;b->c
> +output: d>c>b>a>{}<a<b<c<d
> +
> +# First DSO fully dependent on 4 DSOs, with another DSO at the end of chain.
> +tst-dso-ordering6: a->[bcde]->f
> +output: f>e>d>c>b>a>{}<a<b<c<d<e<f
> +
> +# Sequence including 2 dependent and 3 dependent DSOs, and one of the
> +# dependent DSOs is dependent on an earlier DSO.
> +tst-dso-ordering7: a->[bc];b->[cde];e->f
> +output: f>e>d>c>b>a>{}<a<b<c<d<e<f
> +
> +# Sequence where the DSO c is unerlinked and calls a function in DSO a which
> +# is technically a cycle. The main executable depends on the first two DSOs.
> +# Note: This test has unspecified behavior.
> +tst-dso-ordering8: a->b->c=>a;{}->[ba]
> +output: c>b>a>{}<a<b<c
> +
> +# Generate the permutation of DT_NEEDED order between the main binary and
> +# all 5 DSOs; all link orders should produce exact same init/fini ordering
> +tst-dso-ordering9: a->b->c->d->e;{}!->[abcde]
> +output: e>d>c>b>a>{}<a<b<c<d<e
> +
> +# Test if init/fini ordering behavior is proper, despite main program with
> +# an soname that may cause confusion
> +tst-dso-ordering10: {}->a->b->c;soname({})=c
> +output: b>a>{}<a<b
> +
> +# Complex example from Bugzilla #15311, under-linked and with circular
> +# relocation(dynamic) dependencies. While this is technically unspecified, the
> +# presumed reasonable practical behavior is for the destructor order to respect
> +# the static DT_NEEDED links (here this means the a->b->c->d order).
> +# The older dynamic_sort=1 algorithm does not achieve this, while the DFS-based
> +# dynamic_sort=2 algorithm does, although it is still arguable whether going
> +# beyond spec to do this is the right thing to do.
> +# The below expected outputs are what the two algorithms currently produce
> +# respectively, for regression testing purposes.
> +tst-bz15311: {+a;+e;+f;+g;+d;%d;-d;-g;-f;-e;-a};a->b->c->d;d=>[ba];c=>a;b=>e=>a;c=>f=>b;d=>g=>c
> +output(glibc.rtld.dynamic_sort=1): {+a[d>c>b>a>];+e[e>];+f[f>];+g[g>];+d[];%d(b(e(a()))a()g(c(a()f(b(e(a()))))));-d[];-g[];-f[];-e[];-a[<a<c<d<g<f<b<e];}
> +output(glibc.rtld.dynamic_sort=2): {+a[d>c>b>a>];+e[e>];+f[f>];+g[g>];+d[];%d(b(e(a()))a()g(c(a()f(b(e(a()))))));-d[];-g[];-f[];-e[];-a[<g<f<a<b<c<d<e];}

This triggers a regression without the actual fix in the subsequent patch.
The test needs to either be marked as xfail_output (and adjusted in the
patch that actually fixes it) or move to the subsequent patch.

> diff --git a/elf/dso-sort-tests-2.def b/elf/dso-sort-tests-2.def
> new file mode 100644
> index 0000000000..865f57be04
> --- /dev/null
> +++ b/elf/dso-sort-tests-2.def
> @@ -0,0 +1,614 @@
> +# Large DSO sorting testcase adapted from Red Hat Bugzilla 1162810
> +#
> +# Note that below we specify different expected outputs between dynamic_sort=1
> +# and dynamic_sort=2 algorithms, due to circular dependencies in the testcase
> +# causing different sorting behavior. These expected outputs are what the two
> +# algorithms currently produce, and are used for regression comparison tests.
> +# They are not "definitively" correct outputs, for circular dependencies
> +# inherently have unspecified behavior.
> +
> +xtest(tst-redhat-1162810):
> +{}->A101
> +{}->*
> +A101->(B101 B163 B122 B181)
> +A102->(B102 B140 B199 B158)
> +A103->(B103 B117 B176 B135)
> +A104->(B104 B194 B153 B112)
> +A105->(B105 B171 B130 B189)
> +A106->(B106 B148 B107 B166)
> +A107->(B107 B125 B184 B143)
> +A108->(B108 B102 B161 B120)
> +A109->(B109 B179 B138 B197)
> +A110->(B110 B156 B115 B174)
> +A111->(B111 B133 B192 B151)
> +A112->(B112 B110 B169 B128)
> +A113->(B113 B187 B146 B105)
> +A114->(B114 B164 B123 B182)
> +A115->(B115 B141 B200 B159)
> +A116->(B116 B118 B177 B136)
> +A117->(B117 B195 B154 B113)
> +A118->(B118 B172 B131 B190)
> +A119->(B119 B149 B108 B167)
> +A120->(B120 B126 B185 B144)
> +A121->(B121 B103 B162)
> +A122->(B122 B180 B139 B198)
> +A123->(B123 B157 B116 B175)
> +A124->(B124 B134 B193 B152)
> +A125->(B125 B111 B170 B129)
> +A126->(B126 B188 B147 B106)
> +A127->(B127 B165 B124 B183)
> +A128->(B128 B142 B101 B160)
> +A129->(B129 B119 B178 B137)
> +A130->(B130 B196 B155 B114)
> +A131->(B131 B173 B132 B191)
> +A132->(B132 B150 B109 B168)
> +A133->(B133 B127 B186 B145)
> +A134->(B134 B104 B163 B122)
> +A135->(B135 B181 B140 B199)
> +A136->(B136 B158 B117 B176)
> +A137->(B137 B135 B194 B153)
> +A138->(B138 B112 B171 B130)
> +A139->(B139 B189 B148 B107)
> +A140->(B140 B166 B125 B184)
> +A141->(B141 B143 B102 B161)
> +A142->(B142 B120 B179 B138)
> +A143->(B143 B197 B156 B115)
> +A144->(B144 B174 B133 B192)
> +A145->(B145 B151 B110 B169)
> +A146->(B146 B128 B187)
> +A147->(B147 B105 B164 B123)
> +A148->(B148 B182 B141 B200)
> +A149->(B149 B159 B118 B177)
> +A150->(B150 B136 B195 B154)
> +A151->(B151 B113 B172 B131)
> +A152->(B152 B190 B149 B108)
> +A153->(B153 B167 B126 B185)
> +A154->(B154 B144 B103 B162)
> +A155->(B155 B121 B180 B139)
> +A156->(B156 B198 B157 B116)
> +A157->(B157 B175 B134 B193)
> +A158->(B158 B152 B111 B170)
> +A159->(B159 B129 B188 B147)
> +A160->(B160 B106 B165 B124)
> +A161->(B161 B183 B142 B101)
> +A162->(B162 B160 B119 B178)
> +A163->(B163 B137 B196 B155)
> +A164->(B164 B114 B173 B132)
> +A165->(B165 B191 B150 B109)
> +A166->(B166 B168 B127 B186)
> +A167->(B167 B145 B104 B163)
> +A168->(B168 B122 B181 B140)
> +A169->(B169 B199 B158 B117)
> +A170->(B170 B176 B135 B194)
> +A171->(B171 B153 B112)
> +A172->(B172 B130 B189 B148)
> +A173->(B173 B107 B166 B125)
> +A174->(B174 B184 B143 B102)
> +A175->(B175 B161 B120 B179)
> +A176->(B176 B138 B197 B156)
> +A177->(B177 B115 B174 B133)
> +A178->(B178 B192 B151 B110)
> +A179->(B179 B169 B128 B187)
> +A180->(B180 B146 B105 B164)
> +A181->(B181 B123 B182 B141)
> +A182->(B182 B200 B159 B118)
> +A183->(B183 B177 B136 B195)
> +A184->(B184 B154 B113 B172)
> +A185->(B185 B131 B190 B149)
> +A186->(B186 B108 B167 B126)
> +A187->(B187 B185 B144 B103)
> +A188->(B188 B162 B121 B180)
> +A189->(B189 B139 B198 B157)
> +A190->(B190 B116 B175 B134)
> +A191->(B191 B193 B152 B111)
> +A192->(B192 B170 B129 B188)
> +A193->(B193 B147 B106 B165)
> +A194->(B194 B124 B183 B142)
> +A195->(B195 B101 B160 B119)
> +A196->(B196 B178 B137)
> +A197->(B197 B155 B114 B173)
> +A198->(B198 B132 B191 B150)
> +A199->(B199 B109 B168 B127)
> +A200->(B200 B186 B145 B104)
> +B101->(C101 C164 C123 C182)
> +B102->(C102 C141 C200 C159)
> +B103->(C103 C118 C177 C136)
> +B104->(C104 C195 C154 C113)
> +B105->(C105 C172 C131 C190)
> +B106->(C106 C149 C108 C167)
> +B107->(C107 C126 C185 C144)
> +B108->(C108 C103 C162 C121)
> +B109->(C109 C180 C139 C198)
> +B110->(C110 C157 C116 C175)
> +B111->(C111 C134 C193 C152)
> +B112->(C112 C111 C170 C129)
> +B113->(C113 C188 C147 C106)
> +B114->(C114 C165 C124 C183)
> +B115->(C115 C142 C101 C160)
> +B116->(C116 C119 C178 C137)
> +B117->(C117 C196 C155 C114)
> +B118->(C118 C173 C132 C191)
> +B119->(C119 C150 C109 C168)
> +B120->(C120 C127 C186 C145)
> +B121->(C121 C104 C163 C122)
> +B122->(C122 C181 C140 C199)
> +B123->(C123 C158 C117 C176)
> +B124->(C124 C135 C194 C153)
> +B125->(C125 C112 C171 C130)
> +B126->(C126 C189 C148 C107)
> +B127->(C127 C166 C125 C184)
> +B128->(C128 C143 C102 C161)
> +B129->(C129 C120 C179 C138)
> +B130->(C130 C197 C156 C115)
> +B131->(C131 C174 C133 C192)
> +B132->(C132 C151 C110 C169)
> +B133->(C133 C128 C187 C146)
> +B134->(C134 C105 C164 C123)
> +B135->(C135 C182 C141 C200)
> +B136->(C136 C159 C118 C177)
> +B137->(C137 C136 C195 C154)
> +B138->(C138 C113 C172 C131)
> +B139->(C139 C190 C149 C108)
> +B140->(C140 C167 C126 C185)
> +B141->(C141 C144 C103 C162)
> +B142->(C142 C121 C180 C139)
> +B143->(C143 C198 C157 C116)
> +B144->(C144 C175 C134 C193)
> +B145->(C145 C152 C111 C170)
> +B146->(C146 C129 C188 C147)
> +B147->(C147 C106 C165 C124)
> +B148->(C148 C183 C142 C101)
> +B149->(C149 C160 C119 C178)
> +B150->(C150 C137 C196 C155)
> +B151->(C151 C114 C173 C132)
> +B152->(C152 C191 C150 C109)
> +B153->(C153 C168 C127 C186)
> +B154->(C154 C145 C104 C163)
> +B155->(C155 C122 C181 C140)
> +B156->(C156 C199 C158 C117)
> +B157->(C157 C176 C135 C194)
> +B158->(C158 C153 C112 C171)
> +B159->(C159 C130 C189 C148)
> +B160->(C160 C107 C166 C125)
> +B161->(C161 C184 C143 C102)
> +B162->(C162 C161 C120 C179)
> +B163->(C163 C138 C197 C156)
> +B164->(C164 C115 C174 C133)
> +B165->(C165 C192 C151 C110)
> +B166->(C166 C169 C128 C187)
> +B167->(C167 C146 C105 C164)
> +B168->(C168 C123 C182 C141)
> +B169->(C169 C200 C159 C118)
> +B170->(C170 C177 C136 C195)
> +B171->(C171 C154 C113 C172)
> +B172->(C172 C131 C190 C149)
> +B173->(C173 C108 C167 C126)
> +B174->(C174 C185 C144 C103)
> +B175->(C175 C162 C121 C180)
> +B176->(C176 C139 C198 C157)
> +B177->(C177 C116 C175 C134)
> +B178->(C178 C193 C152 C111)
> +B179->(C179 C170 C129 C188)
> +B180->(C180 C147 C106 C165)
> +B181->(C181 C124 C183 C142)
> +B182->(C182 C101 C160 C119)
> +B183->(C183 C178 C137 C196)
> +B184->(C184 C155 C114 C173)
> +B185->(C185 C132 C191 C150)
> +B186->(C186 C109 C168 C127)
> +B187->(C187 C186 C145 C104)
> +B188->(C188 C163 C122 C181)
> +B189->(C189 C140 C199 C158)
> +B190->(C190 C117 C176 C135)
> +B191->(C191 C194 C153 C112)
> +B192->(C192 C171 C130 C189)
> +B193->(C193 C148 C107 C166)
> +B194->(C194 C125 C184 C143)
> +B195->(C195 C102 C161 C120)
> +B196->(C196 C179 C138 C197)
> +B197->(C197 C156 C115 C174)
> +B198->(C198 C133 C192 C151)
> +B199->(C199 C110 C169 C128)
> +B200->(C200 C187 C146 C105)
> +C101->(A165 A124)
> +C102->(A183 A142)
> +C103->(A101 A160)
> +C104->(A119 A178)
> +C105->(A137 A196)
> +C106->(A155 A114)
> +C107->(A173 A132)
> +C108->(A191 A150)
> +C109->(A109 A168)
> +C110->(A127 A186)
> +C111->(A145 A104)
> +C112->(A163 A122)
> +C113->(A181 A140)
> +C114->(A199 A158)
> +C115->(A117 A176)
> +C116->(A135 A194)
> +C117->(A153 A112)
> +C118->(A171 A130)
> +C119->(A189 A148)
> +C120->(A107 A166)
> +C121->(A125 A184)
> +C122->(A143 A102)
> +C123->(A161 A120)
> +C124->(A179 A138)
> +C125->(A197 A156)
> +C126->(A115 A174)
> +C127->(A133 A192)
> +C128->(A151 A110)
> +C129->(A169 A128)
> +C130->(A187 A146)
> +C131->(A105 A164)
> +C132->(A123 A182)
> +C133->(A141 A200)
> +C134->(A159 A118)
> +C135->(A177 A136)
> +C136->(A195 A154)
> +C137->(A113 A172)
> +C138->(A131 A190)
> +C139->(A149 A108)
> +C140->(A167 A126)
> +C141->(A185 A144)
> +C142->(A103 A162)
> +C143->(A121 A180)
> +C144->(A139 A198)
> +C145->(A157 A116)
> +C146->(A175 A134)
> +C147->(A193 A152)
> +C148->(A111 A170)
> +C149->(A129 A188)
> +C150->(A147 A106)
> +C151->(A165 A124)
> +C152->(A183 A142)
> +C153->(A101 A160)
> +C154->(A119 A178)
> +C155->(A137 A196)
> +C156->(A155 A114)
> +C157->(A173 A132)
> +C158->(A191 A150)
> +C159->(A109 A168)
> +C160->(A127 A186)
> +C161->(A145 A104)
> +C162->(A163 A122)
> +C163->(A181 A140)
> +C164->(A199 A158)
> +C165->(A117 A176)
> +C166->(A135 A194)
> +C167->(A153 A112)
> +C168->(A171 A130)
> +C169->(A189 A148)
> +C170->(A107 A166)
> +C171->(A125 A184)
> +C172->(A143 A102)
> +C173->(A161 A120)
> +C174->(A179 A138)
> +C175->(A197 A156)
> +C176->(A115 A174)
> +C177->(A133 A192)
> +C178->(A151 A110)
> +C179->(A169 A128)
> +C180->(A187 A146)
> +C181->(A105 A164)
> +C182->(A123 A182)
> +C183->(A141 A200)
> +C184->(A159 A118)
> +C185->(A177 A136)
> +C186->(A195 A154)
> +C187->(A113 A172)
> +C188->(A131 A190)
> +C189->(A149 A108)
> +C190->(A167 A126)
> +C191->(A185 A144)
> +C192->(A103 A162)
> +C193->(A121 A180)
> +C194->(A139 A198)
> +C195->(A157 A116)
> +C196->(A175 A134)
> +C197->(A193 A152)
> +C198->(A111 A170)
> +C199->(A129 A188)
> +C200->(A147 A106)
> +M11X11->(M13X14 M12X13 M12X12 M12X11)
> +M11X12->(M13X25 M12X24 M12X23 M12X22)
> +M11X13->(M13X21 M12X20 M12X19 M12X18)
> +M11X14->(M13X17 M12X16 M12X15 M12X14)
> +M11X15->(M13X13 M12X12 M12X11 M12X25)
> +M11X16->(M13X24 M12X23 M12X22 M12X21)
> +M11X17->(M13X20 M12X19 M12X18 M12X17)
> +M11X18->(M13X16 M12X15 M12X14 M12X13)
> +M11X19->(M13X12 M12X11 M12X25 M12X24)
> +M11X20->(M13X23 M12X22 M12X21 M12X20)
> +M11X21->(M13X19 M12X18 M12X17 M12X16)
> +M11X22->(M13X15 M12X14 M12X13 M12X12)
> +M11X23->(M13X11 M12X25 M12X24 M12X23)
> +M11X24->(M13X22 M12X21 M12X20 M12X19)
> +M11X25->(M13X18 M12X17 M12X16 M12X15)
> +M12X11->(M14X14 M13X13 M13X12 M13X11)
> +M12X12->(M14X25 M13X24 M13X23 M13X22)
> +M12X13->(M14X21 M13X20 M13X19 M13X18)
> +M12X14->(M14X17 M13X16 M13X15 M13X14)
> +M12X15->(M14X13 M13X12 M13X11 M13X25)
> +M12X16->(M14X24 M13X23 M13X22 M13X21)
> +M12X17->(M14X20 M13X19 M13X18 M13X17)
> +M12X18->(M14X16 M13X15 M13X14 M13X13)
> +M12X19->(M14X12 M13X11 M13X25 M13X24)
> +M12X20->(M14X23 M13X22 M13X21 M13X20)
> +M12X21->(M14X19 M13X18 M13X17 M13X16)
> +M12X22->(M14X15 M13X14 M13X13 M13X12)
> +M12X23->(M14X11 M13X25 M13X24 M13X23)
> +M12X24->(M14X22 M13X21 M13X20 M13X19)
> +M12X25->(M14X18 M13X17 M13X16 M13X15)
> +M13X11->(M15X14 M14X13 M14X12 M14X11)
> +M13X12->(M15X25 M14X24 M14X23 M14X22)
> +M13X13->(M15X21 M14X20 M14X19 M14X18)
> +M13X14->(M15X17 M14X16 M14X15 M14X14)
> +M13X15->(M15X13 M14X12 M14X11 M14X25)
> +M13X16->(M15X24 M14X23 M14X22 M14X21)
> +M13X17->(M15X20 M14X19 M14X18 M14X17)
> +M13X18->(M15X16 M14X15 M14X14 M14X13)
> +M13X19->(M15X12 M14X11 M14X25 M14X24)
> +M13X20->(M15X23 M14X22 M14X21 M14X20)
> +M13X21->(M15X19 M14X18 M14X17 M14X16)
> +M13X22->(M15X15 M14X14 M14X13 M14X12)
> +M13X23->(M15X11 M14X25 M14X24 M14X23)
> +M13X24->(M15X22 M14X21 M14X20 M14X19)
> +M13X25->(M15X18 M14X17 M14X16 M14X15)
> +M14X11->(M16X14 M15X13 M15X12 M15X11)
> +M14X12->(M16X25 M15X24 M15X23 M15X22)
> +M14X13->(M16X21 M15X20 M15X19 M15X18)
> +M14X14->(M16X17 M15X16 M15X15 M15X14)
> +M14X15->(M16X13 M15X12 M15X11 M15X25)
> +M14X16->(M16X24 M15X23 M15X22 M15X21)
> +M14X17->(M16X20 M15X19 M15X18 M15X17)
> +M14X18->(M16X16 M15X15 M15X14 M15X13)
> +M14X19->(M16X12 M15X11 M15X25 M15X24)
> +M14X20->(M16X23 M15X22 M15X21 M15X20)
> +M14X21->(M16X19 M15X18 M15X17 M15X16)
> +M14X22->(M16X15 M15X14 M15X13 M15X12)
> +M14X23->(M16X11 M15X25 M15X24 M15X23)
> +M14X24->(M16X22 M15X21 M15X20 M15X19)
> +M14X25->(M16X18 M15X17 M15X16 M15X15)
> +M15X11->(M17X14 M16X13 M16X12 M16X11)
> +M15X12->(M17X25 M16X24 M16X23 M16X22)
> +M15X13->(M17X21 M16X20 M16X19 M16X18)
> +M15X14->(M17X17 M16X16 M16X15 M16X14)
> +M15X15->(M17X13 M16X12 M16X11 M16X25)
> +M15X16->(M17X24 M16X23 M16X22 M16X21)
> +M15X17->(M17X20 M16X19 M16X18 M16X17)
> +M15X18->(M17X16 M16X15 M16X14 M16X13)
> +M15X19->(M17X12 M16X11 M16X25 M16X24)
> +M15X20->(M17X23 M16X22 M16X21 M16X20)
> +M15X21->(M17X19 M16X18 M16X17 M16X16)
> +M15X22->(M17X15 M16X14 M16X13 M16X12)
> +M15X23->(M17X11 M16X25 M16X24 M16X23)
> +M15X24->(M17X22 M16X21 M16X20 M16X19)
> +M15X25->(M17X18 M16X17 M16X16 M16X15)
> +M16X11->(M18X14 M17X13 M17X12 M17X11)
> +M16X12->(M18X25 M17X24 M17X23 M17X22)
> +M16X13->(M18X21 M17X20 M17X19 M17X18)
> +M16X14->(M18X17 M17X16 M17X15 M17X14)
> +M16X15->(M18X13 M17X12 M17X11 M17X25)
> +M16X16->(M18X24 M17X23 M17X22 M17X21)
> +M16X17->(M18X20 M17X19 M17X18 M17X17)
> +M16X18->(M18X16 M17X15 M17X14 M17X13)
> +M16X19->(M18X12 M17X11 M17X25 M17X24)
> +M16X20->(M18X23 M17X22 M17X21 M17X20)
> +M16X21->(M18X19 M17X18 M17X17 M17X16)
> +M16X22->(M18X15 M17X14 M17X13 M17X12)
> +M16X23->(M18X11 M17X25 M17X24 M17X23)
> +M16X24->(M18X22 M17X21 M17X20 M17X19)
> +M16X25->(M18X18 M17X17 M17X16 M17X15)
> +M17X11->(M19X14 M18X13 M18X12 M18X11)
> +M17X12->(M19X25 M18X24 M18X23 M18X22)
> +M17X13->(M19X21 M18X20 M18X19 M18X18)
> +M17X14->(M19X17 M18X16 M18X15 M18X14)
> +M17X15->(M19X13 M18X12 M18X11 M18X25)
> +M17X16->(M19X24 M18X23 M18X22 M18X21)
> +M17X17->(M19X20 M18X19 M18X18 M18X17)
> +M17X18->(M19X16 M18X15 M18X14 M18X13)
> +M17X19->(M19X12 M18X11 M18X25 M18X24)
> +M17X20->(M19X23 M18X22 M18X21 M18X20)
> +M17X21->(M19X19 M18X18 M18X17 M18X16)
> +M17X22->(M19X15 M18X14 M18X13 M18X12)
> +M17X23->(M19X11 M18X25 M18X24 M18X23)
> +M17X24->(M19X22 M18X21 M18X20 M18X19)
> +M17X25->(M19X18 M18X17 M18X16 M18X15)
> +M18X11->(M20X14 M19X13 M19X12 M19X11)
> +M18X12->(M20X25 M19X24 M19X23 M19X22)
> +M18X13->(M20X21 M19X20 M19X19 M19X18)
> +M18X14->(M20X17 M19X16 M19X15 M19X14)
> +M18X15->(M20X13 M19X12 M19X11 M19X25)
> +M18X16->(M20X24 M19X23 M19X22 M19X21)
> +M18X17->(M20X20 M19X19 M19X18 M19X17)
> +M18X18->(M20X16 M19X15 M19X14 M19X13)
> +M18X19->(M20X12 M19X11 M19X25 M19X24)
> +M18X20->(M20X23 M19X22 M19X21 M19X20)
> +M18X21->(M20X19 M19X18 M19X17 M19X16)
> +M18X22->(M20X15 M19X14 M19X13 M19X12)
> +M18X23->(M20X11 M19X25 M19X24 M19X23)
> +M18X24->(M20X22 M19X21 M19X20 M19X19)
> +M18X25->(M20X18 M19X17 M19X16 M19X15)
> +M19X11->(M21X14 M20X13 M20X12 M20X11)
> +M19X12->(M21X25 M20X24 M20X23 M20X22)
> +M19X13->(M21X21 M20X20 M20X19 M20X18)
> +M19X14->(M21X17 M20X16 M20X15 M20X14)
> +M19X15->(M21X13 M20X12 M20X11 M20X25)
> +M19X16->(M21X24 M20X23 M20X22 M20X21)
> +M19X17->(M21X20 M20X19 M20X18 M20X17)
> +M19X18->(M21X16 M20X15 M20X14 M20X13)
> +M19X19->(M21X12 M20X11 M20X25 M20X24)
> +M19X20->(M21X23 M20X22 M20X21 M20X20)
> +M19X21->(M21X19 M20X18 M20X17 M20X16)
> +M19X22->(M21X15 M20X14 M20X13 M20X12)
> +M19X23->(M21X11 M20X25 M20X24 M20X23)
> +M19X24->(M21X22 M20X21 M20X20 M20X19)
> +M19X25->(M21X18 M20X17 M20X16 M20X15)
> +M20X11->(M22X14 M21X13 M21X12 M21X11)
> +M20X12->(M22X25 M21X24 M21X23 M21X22)
> +M20X13->(M22X21 M21X20 M21X19 M21X18)
> +M20X14->(M22X17 M21X16 M21X15 M21X14)
> +M20X15->(M22X13 M21X12 M21X11 M21X25)
> +M20X16->(M22X24 M21X23 M21X22 M21X21)
> +M20X17->(M22X20 M21X19 M21X18 M21X17)
> +M20X18->(M22X16 M21X15 M21X14 M21X13)
> +M20X19->(M22X12 M21X11 M21X25 M21X24)
> +M20X20->(M22X23 M21X22 M21X21 M21X20)
> +M20X21->(M22X19 M21X18 M21X17 M21X16)
> +M20X22->(M22X15 M21X14 M21X13 M21X12)
> +M20X23->(M22X11 M21X25 M21X24 M21X23)
> +M20X24->(M22X22 M21X21 M21X20 M21X19)
> +M20X25->(M22X18 M21X17 M21X16 M21X15)
> +M21X11->(M23X15 M22X14 M22X13 M22X12)
> +M21X12->(M11X11 M23X25 M22X24 M22X23 M22X22)
> +M21X13->(M23X21 M22X20 M22X19 M22X18)
> +M21X14->(M23X17 M22X16 M22X15 M22X14)
> +M21X15->(M23X13 M22X12 M22X11 M22X25)
> +M21X16->(M23X24 M22X23 M22X22 M22X21)
> +M21X17->(M23X20 M22X19 M22X18 M22X17)
> +M21X18->(M23X16 M22X15 M22X14 M22X13)
> +M21X19->(M23X12 M22X11 M22X25 M22X24)
> +M21X20->(M23X23 M22X22 M22X21 M22X20)
> +M21X21->(M23X19 M22X18 M22X17 M22X16)
> +M21X22->(M23X15 M22X14 M22X13 M22X12)
> +M21X23->(M23X11 M22X25 M22X24 M22X23)
> +M21X24->(M23X22 M22X21 M22X20 M22X19)
> +M21X25->(M23X18 M22X17 M22X16 M22X15)
> +M22X11->(M24X16 M23X15 M23X14 M23X13)
> +M22X12->(M12X12 M24X11 M23X25 M23X24 M23X23)
> +M22X13->(M24X22 M23X21 M23X20 M23X19)
> +M22X14->(M24X18 M23X17 M23X16 M23X15)
> +M22X15->(M24X14 M23X13 M23X12 M23X11)
> +M22X16->(M24X25 M23X24 M23X23 M23X22)
> +M22X17->(M24X21 M23X20 M23X19 M23X18)
> +M22X18->(M24X17 M23X16 M23X15 M23X14)
> +M22X19->(M24X13 M23X12 M23X11 M23X25)
> +M22X20->(M24X24 M23X23 M23X22 M23X21)
> +M22X21->(M24X20 M23X19 M23X18 M23X17)
> +M22X22->(M24X16 M23X15 M23X14 M23X13)
> +M22X23->(M24X12 M23X11 M23X25 M23X24)
> +M22X24->(M24X23 M23X22 M23X21 M23X20)
> +M22X25->(M24X19 M23X18 M23X17 M23X16)
> +M23X11->(M25X17 M24X16 M24X15 M24X14)
> +M23X12->(M13X13 M25X12 M24X11 M24X25 M24X24)
> +M23X13->(M25X23 M24X22 M24X21 M24X20)
> +M23X14->(M25X19 M24X18 M24X17 M24X16)
> +M23X15->(M25X15 M24X14 M24X13 M24X12)
> +M23X16->(M25X11 M24X25 M24X24 M24X23)
> +M23X17->(M25X22 M24X21 M24X20 M24X19)
> +M23X18->(M25X18 M24X17 M24X16 M24X15)
> +M23X19->(M25X14 M24X13 M24X12 M24X11)
> +M23X20->(M25X25 M24X24 M24X23 M24X22)
> +M23X21->(M25X21 M24X20 M24X19 M24X18)
> +M23X22->(M25X17 M24X16 M24X15 M24X14)
> +M23X23->(M25X13 M24X12 M24X11 M24X25)
> +M23X24->(M25X24 M24X23 M24X22 M24X21)
> +M23X25->(M25X20 M24X19 M24X18 M24X17)
> +M24X11->(M26X18 M25X17 M25X16 M25X15)
> +M24X12->(M14X14 M26X13 M25X12 M25X11 M25X25)
> +M24X13->(M26X24 M25X23 M25X22 M25X21)
> +M24X14->(M26X20 M25X19 M25X18 M25X17)
> +M24X15->(M26X16 M25X15 M25X14 M25X13)
> +M24X16->(M26X12 M25X11 M25X25 M25X24)
> +M24X17->(M26X23 M25X22 M25X21 M25X20)
> +M24X18->(M26X19 M25X18 M25X17 M25X16)
> +M24X19->(M26X15 M25X14 M25X13 M25X12)
> +M24X20->(M26X11 M25X25 M25X24 M25X23)
> +M24X21->(M26X22 M25X21 M25X20 M25X19)
> +M24X22->(M26X18 M25X17 M25X16 M25X15)
> +M24X23->(M26X14 M25X13 M25X12 M25X11)
> +M24X24->(M26X25 M25X24 M25X23 M25X22)
> +M24X25->(M26X21 M25X20 M25X19 M25X18)
> +M25X11->(M27X19 M26X18 M26X17 M26X16)
> +M25X12->(M15X15 M27X14 M26X13 M26X12 M26X11)
> +M25X13->(M27X25 M26X24 M26X23 M26X22)
> +M25X14->(M27X21 M26X20 M26X19 M26X18)
> +M25X15->(M27X17 M26X16 M26X15 M26X14)
> +M25X16->(M27X13 M26X12 M26X11 M26X25)
> +M25X17->(M27X24 M26X23 M26X22 M26X21)
> +M25X18->(M27X20 M26X19 M26X18 M26X17)
> +M25X19->(M27X16 M26X15 M26X14 M26X13)
> +M25X20->(M27X12 M26X11 M26X25 M26X24)
> +M25X21->(M27X23 M26X22 M26X21 M26X20)
> +M25X22->(M27X19 M26X18 M26X17 M26X16)
> +M25X23->(M27X15 M26X14 M26X13 M26X12)
> +M25X24->(M27X11 M26X25 M26X24 M26X23)
> +M25X25->(M27X22 M26X21 M26X20 M26X19)
> +M26X11->(M28X20 M27X19 M27X18 M27X17)
> +M26X12->(M16X16 M28X15 M27X14 M27X13 M27X12)
> +M26X13->(M28X11 M27X25 M27X24 M27X23)
> +M26X14->(M28X22 M27X21 M27X20 M27X19)
> +M26X15->(M28X18 M27X17 M27X16 M27X15)
> +M26X16->(M28X14 M27X13 M27X12 M27X11)
> +M26X17->(M28X25 M27X24 M27X23 M27X22)
> +M26X18->(M28X21 M27X20 M27X19 M27X18)
> +M26X19->(M28X17 M27X16 M27X15 M27X14)
> +M26X20->(M28X13 M27X12 M27X11 M27X25)
> +M26X21->(M28X24 M27X23 M27X22 M27X21)
> +M26X22->(M28X20 M27X19 M27X18 M27X17)
> +M26X23->(M28X16 M27X15 M27X14 M27X13)
> +M26X24->(M28X12 M27X11 M27X25 M27X24)
> +M26X25->(M28X23 M27X22 M27X21 M27X20)
> +M27X11->(M29X21 M28X20 M28X19 M28X18)
> +M27X12->(M17X17 M29X16 M28X15 M28X14 M28X13)
> +M27X13->(M29X12 M28X11 M28X25 M28X24)
> +M27X14->(M29X23 M28X22 M28X21 M28X20)
> +M27X15->(M29X19 M28X18 M28X17 M28X16)
> +M27X16->(M29X15 M28X14 M28X13 M28X12)
> +M27X17->(M29X11 M28X25 M28X24 M28X23)
> +M27X18->(M29X22 M28X21 M28X20 M28X19)
> +M27X19->(M29X18 M28X17 M28X16 M28X15)
> +M27X20->(M29X14 M28X13 M28X12 M28X11)
> +M27X21->(M29X25 M28X24 M28X23 M28X22)
> +M27X22->(M29X21 M28X20 M28X19 M28X18)
> +M27X23->(M29X17 M28X16 M28X15 M28X14)
> +M27X24->(M29X13 M28X12 M28X11 M28X25)
> +M27X25->(M29X24 M28X23 M28X22 M28X21)
> +M28X11->(M30X22 M29X21 M29X20 M29X19)
> +M28X12->(M18X18 M30X17 M29X16 M29X15 M29X14)
> +M28X13->(M30X13 M29X12 M29X11 M29X25)
> +M28X14->(M30X24 M29X23 M29X22 M29X21)
> +M28X15->(M30X20 M29X19 M29X18 M29X17)
> +M28X16->(M30X16 M29X15 M29X14 M29X13)
> +M28X17->(M30X12 M29X11 M29X25 M29X24)
> +M28X18->(M30X23 M29X22 M29X21 M29X20)
> +M28X19->(M30X19 M29X18 M29X17 M29X16)
> +M28X20->(M30X15 M29X14 M29X13 M29X12)
> +M28X21->(M30X11 M29X25 M29X24 M29X23)
> +M28X22->(M30X22 M29X21 M29X20 M29X19)
> +M28X23->(M30X18 M29X17 M29X16 M29X15)
> +M28X24->(M30X14 M29X13 M29X12 M29X11)
> +M28X25->(M30X25 M29X24 M29X23 M29X22)
> +M29X11->(M30X22 M30X21 M30X20)
> +M29X12->(M30X17 M30X16 M30X15)
> +M29X13->(M30X13 M30X12 M30X11)
> +M29X14->(M30X24 M30X23 M30X22)
> +M29X15->(M30X20 M30X19 M30X18)
> +M29X16->(M30X16 M30X15 M30X14)
> +M29X17->(M30X12 M30X11 M30X25)
> +M29X18->(M30X23 M30X22 M30X21)
> +M29X19->(M30X19 M30X18 M30X17)
> +M29X20->(M30X15 M30X14 M30X13)
> +M29X21->(M30X11 M30X25 M30X24)
> +M29X22->(M30X22 M30X21 M30X20)
> +M29X23->(M30X18 M30X17 M30X16)
> +M29X24->(M30X14 M30X13 M30X12)
> +M29X25->(M30X25 M30X24 M30X23)
> +M30X11
> +M30X12
> +M30X13
> +M30X14
> +M30X15
> +M30X16
> +M30X17
> +M30X18
> +M30X19
> +M30X20
> +M30X21
> +M30X22
> +M30X23
> +M30X24
> +M30X25
> +xfail_output(glibc.rtld.dynamic_sort=1): M30X19>M30X15>M30X16>M30X11>M30X12>M30X17>M30X13>M30X14>M29X20>M30X23>M30X24>M30X20>M30X18>M29X15>M29X12>M30X22>M30X21>M29X22>M30X25>M29X19>M29X23>M29X16>M29X24>M29X13>M29X17>M29X18>M28X19>M29X21>M29X25>M29X14>M28X20>M28X15>M28X16>M28X21>M27X18>M29X11>M28X17>M28X11>M28X22>M27X14>M28X18>M27X15>M28X13>M27X11>M28X23>M27X25>M28X14>M28X25>M27X23>M27X22>M28X24>M27X21>M27X13>M27X19>M27X17>M26X11>M26X23>M26X21>M26X22>M26X20>M26X16>M25X21>M17X22>M15X15>M20X14>M20X16>M18X18>M28X12>M27X24>M25X17>M27X20>M26X18>M26X17>M27X16>M26X19>M25X18>M26X24>M25X20>M24X17>M23X18>M25X13>M26X13>M17X23>M16X16>M26X12>M25X12>M26X15>M24X19>M25X23>M25X24>M25X25>M24X20>M25X19>M24X21>M23X17>M22X21>M24X14>M23X22>M24X24>M22X20>M24X13>M25X11>M24X12>M25X15>M23X15>M25X16>M24X22>M23X13>M24X18>M23X14>M22X22>M21X20>M24X25>M23X16>M22X25>M21X19>M22X14>M23X11>M22X15>M21X18>M22X19>M21X17>M20X17>M19X17>M21X24>M21X12>M20X22>M19X16>M18X25>M19X21>M19X20>M18X24>M20X12>M19X11>M23X20>M22X24>M22X16>M21X21>M25X14>M23X19>M23X24>M20X24>M19X12>M18X15>M17X14>M16X18>M14X25>M16X22>M16X20>M17X17>M22X12>M21X11>M20X15>M18X22>M19X24>M19X18>M18X21>M17X16>M17X18>M16X21>M15X20>M19X22>M18X20>M18X11>M17X19>M16X17>M15X21>M16X14>M16X13>M15X22>M14X20>M17X25>M16X19>M14X21>M13X24>M12X12>M16X24>M15X23>M14X16>M16X15>M15X25>M15X11>M15X12>M14X15>M13X14>M14X22>M13X20>M12X13>M11X11>M22X23>M21X15>M21X16>M20X21>M20X20>M18X17>M19X25>M18X23>M21X13>M15X17>M15X18>M18X19>M17X24>M16X12>M17X13>M20X25>M19X23>M15X19>M14X13>M13X18>M15X13>M17X12>M16X11>M18X13>M18X12>M14X11>M14X24>M13X19>M15X14>M17X20>M20X11>M20X13>M21X14>M15X24>M14X12>M13X22>M14X23>M13X23>M14X19>M17X15>M16X25>M17X11>M18X14>M19X19>M21X25>M13X12>M13X11>M14X18>M13X13>M12X11>M15X16>M14X14>M27X12>M17X21>M20X23>M22X13>M21X22>M24X16>M24X15>M26X25>M23X25>M26X14>M23X12>M22X18>M24X11>M16X23>M19X14>M19X13>M21X23>M22X17>M23X23>M23X21>M25X22>M18X16>M19X15>M20X18>M20X19>M22X11>M24X23>C156>C118>C143>C137>C147>C106>C168>C113>C163>C155>C105>C146>C187>A150>C139>C180>C164>C193>C157>A191>C158>B188>A159>C184>C121>C154>B171>A105>C131>C104>B104>C161>C111>B145>C160>B155>A163>C112>C142>B148>C133>B198>A198>A115>C114>B157>A156>C175>B144>A120>C173>B184>A174>C126>B107>A139>C194>B194>A194>C116>B116>C166>B160>B110>A110>C128>B128>A128>C179>B162>A154>C186>B187>A179>C124>B181>A101>C153>B158>A136>C135>C176>A192>B133>A133>C177>B177>A177>C185>C103>B141>A141>C183>A162>C192>C129>B179>C144>B124>B183>C127>B127>A127>B108>A112>B153>A153>C167>B167>A186>A122>C162>A144>B149>C174>B131>A185>C141>B106>A126>A167>C140>B122>A170>C198>B143>C117>C123>B123>A147>A106>C200>B169>C191>B175>A123>B118>A182>C132>B151>A145>A104>A109>C159>C150>B119>A119>A178>B164>B114>A164>C181>A102>C122>B134>A157>A116>C195>B191>B111>C172>B172>A118>B129>A129>C149>A107>C170>B197>A197>A173>B168>A132>C107>B165>A160>A131>C188>A168>B109>C178>A189>A148>C119>C190>C120>B166>B176>C108>B135>B139>A103>B178>A169>B132>C125>C138>B163>A111>B170>C110>A165>C151>C169>C199>A138>C182>A135>B101>B142>C101>C148>B193>B152>A158>A199>C136>B137>A161>B120>A108>A149>A125>B113>A184>C171>A134>A175>A124>B150>B161>B102>A146>A187>C130>B192>B200>A200>A142>A183>C102>B105>B156>A176>C165>B147>A137>A196>B190>A190>B125>C134>C189>B126>B186>A166>B136>B195>A195>B154>B138>B112>B173>A117>B159>B182>A181>A140>C145>B117>A152>A193>C197>B130>A172>A113>A151>B115>A143>B140>B185>B103>A121>A180>A130>A171>B199>C196>B146>B180>C115>B174>B121>A188>B196>B189>C152>C109>A155>A114>M14X17>M13X15>M13X16>M13X17>M12X17>M12X21>M12X25>M12X14>M13X25>M12X15>M13X21>M12X16>M12X18>M12X19>M12X20>M12X22>M12X23>M12X24>M11X25>M11X24>M11X23>M11X22>M11X21>M11X20>M11X19>M11X18>M11X17>M11X16>M11X15>M11X14>M11X13>M11X12>{}<M11X12<M11X13<M11X14<M11X15<M11X16<M11X17<M11X18<M11X19<M11X20<M11X21<M11X22<M11X23<M11X24<M11X25<M12X24<M12X23<M12X22<M12X20<M12X19<M12X18<M12X16<M13X21<M12X15<M13X25<M12X14<M12X25<M12X21<M12X17<M13X17<M13X16<M13X15<M14X17<A114<A155<C109<C152<B189<B196<A188<B121<B174<C115<B180<B146<C196<B199<A171<A130<A180<A121<B103<B185<B140<A143<B115<A151<A113<A172<B130<C197<A193<A152<B117<C145<A140<A181<B182<B159<A117<B173<B112<B138<B154<A195<B195<B136<A166<B186<B126<C189<C134<B125<A190<B190<A196<A137<B147<C165<A176<B156<B105<C102<A183<A142<A200<B200<B192<C130<A187<A146<B102<B161<B150<A124<A175<A134<C171<A184<B113<A125<A149<A108<B120<A161<B137<C136<A199<A158<B152<B193<C148<C101<B142<B101<A135<C182<A138<C199<C169<C151<A165<C110<B170<A111<B163<C138<C125<B132<A169<B178<A103<B139<B135<C108<B176<B166<C120<C190<C119<A148<A189<C178<B109<A168<C188<A131<A160<B165<C107<A132<B168<A173<A197<B197<C170<A107<C149<A129<B129<A118<B172<C172<B111<B191<C195<A116<A157<B134<C122<A102<C181<A164<B114<B164<A178<A119<B119<C150<C159<A109<A104<A145<B151<C132<A182<B118<A123<B175<C191<B169<C200<A106<A147<B123<C123<C117<B143<C198<A170<B122<C140<A167<A126<B106<C141<A185<B131<C174<B149<A144<C162<A122<A186<B167<C167<A153<B153<A112<B108<A127<B127<C127<B183<B124<C144<B179<C129<C192<A162<C183<A141<B141<C103<C185<A177<B177<C177<A133<B133<A192<C176<C135<A136<B158<C153<A101<B181<C124<A179<B187<C186<A154<B162<C179<A128<B128<C128<A110<B110<B160<C166<B116<C116<A194<B194<C194<A139<B107<C126<A174<B184<C173<A120<B144<C175<A156<B157<C114<A115<A198<B198<C133<B148<C142<C112<A163<B155<C160<B145<C111<C161<B104<C104<C131<A105<B171<C154<C121<C184<A159<B188<C158<A191<C157<C193<C164<C180<C139<A150<C187<C146<C105<C155<C163<C113<C168<C106<C147<C137<C143<C118<C156<M24X23<M22X11<M20X19<M20X18<M19X15<M18X16<M25X22<M23X21<M23X23<M22X17<M21X23<M19X13<M19X14<M16X23<M24X11<M22X18<M23X12<M26X14<M23X25<M26X25<M24X15<M24X16<M21X22<M22X13<M20X23<M17X21<M27X12<M14X14<M15X16<M12X11<M13X13<M14X18<M13X11<M13X12<M21X25<M19X19<M18X14<M17X11<M16X25<M17X15<M14X19<M13X23<M14X23<M13X22<M14X12<M15X24<M21X14<M20X13<M20X11<M17X20<M15X14<M13X19<M14X24<M14X11<M18X12<M18X13<M16X11<M17X12<M15X13<M13X18<M14X13<M15X19<M19X23<M20X25<M17X13<M16X12<M17X24<M18X19<M15X18<M15X17<M21X13<M18X23<M19X25<M18X17<M20X20<M20X21<M21X16<M21X15<M22X23<M11X11<M12X13<M13X20<M14X22<M13X14<M14X15<M15X12<M15X11<M15X25<M16X15<M14X16<M15X23<M16X24<M12X12<M13X24<M14X21<M16X19<M17X25<M14X20<M15X22<M16X13<M16X14<M15X21<M16X17<M17X19<M18X11<M18X20<M19X22<M15X20<M16X21<M17X18<M17X16<M18X21<M19X18<M19X24<M18X22<M20X15<M21X11<M22X12<M17X17<M16X20<M16X22<M14X25<M16X18<M17X14<M18X15<M19X12<M20X24<M23X24<M23X19<M25X14<M21X21<M22X16<M22X24<M23X20<M19X11<M20X12<M18X24<M19X20<M19X21<M18X25<M19X16<M20X22<M21X12<M21X24<M19X17<M20X17<M21X17<M22X19<M21X18<M22X15<M23X11<M22X14<M21X19<M22X25<M23X16<M24X25<M21X20<M22X22<M23X14<M24X18<M23X13<M24X22<M25X16<M23X15<M25X15<M24X12<M25X11<M24X13<M22X20<M24X24<M23X22<M24X14<M22X21<M23X17<M24X21<M25X19<M24X20<M25X25<M25X24<M25X23<M24X19<M26X15<M25X12<M26X12<M16X16<M17X23<M26X13<M25X13<M23X18<M24X17<M25X20<M26X24<M25X18<M26X19<M27X16<M26X17<M26X18<M27X20<M25X17<M27X24<M28X12<M18X18<M20X16<M20X14<M15X15<M17X22<M25X21<M26X16<M26X20<M26X22<M26X21<M26X23<M26X11<M27X17<M27X19<M27X13<M27X21<M28X24<M27X22<M27X23<M28X25<M28X14<M27X25<M28X23<M27X11<M28X13<M27X15<M28X18<M27X14<M28X22<M28X11<M28X17<M29X11<M27X18<M28X21<M28X16<M28X15<M28X20<M29X14<M29X25<M29X21<M28X19<M29X18<M29X17<M29X13<M29X24<M29X16<M29X23<M29X19<M30X25<M29X22<M30X21<M30X22<M29X12<M29X15<M30X18<M30X20<M30X24<M30X23<M29X20<M30X14<M30X13<M30X17<M30X12<M30X11<M30X16<M30X15<M30X19
> +output(glibc.rtld.dynamic_sort=2): M30X19>M30X15>M30X16>M30X11>M30X12>M30X17>M30X13>M30X14>M29X20>M30X23>M30X24>M30X20>M30X18>M29X15>M29X12>M30X22>M30X21>M29X22>M30X25>M29X19>M29X23>M29X16>M29X24>M29X13>M29X17>M29X18>M28X19>M29X21>M29X25>M29X14>M28X20>M28X15>M28X16>M28X21>M27X18>M29X11>M28X17>M28X11>M28X22>M28X24>M28X23>M27X21>M28X13>M27X20>M27X19>M26X14>M27X25>M28X18>M27X11>M28X25>M27X24>M26X24>M27X15>M27X14>M27X13>M26X23>M27X17>M26X22>M25X13>M28X14>M27X16>M26X19>M26X18>M27X23>M27X22>M26X17>M25X18>M26X21>M25X17>M26X20>M26X15>M26X13>M25X19>M24X14>M25X23>M26X11>M26X25>M25X16>M25X15>M24X22>M25X21>M25X20>M24X21>M25X25>M25X24>M24X20>M23X13>M22X15>M25X14>M24X19>M23X17>M24X25>M23X24>M24X13>M23X15>M24X18>M23X14>M22X11>M24X15>M23X22>M24X11>M23X19>M22X21>M24X24>M23X21>M22X20>M23X25>M22X19>M21X24>M20X23>M22X22>M25X11>M23X16>M22X18>M23X20>M22X17>M21X21>M21X20>M20X24>M22X14>M22X13>M21X11>M21X17>M22X23>M21X16>M20X25>M19X23>M18X16>M21X22>M20X20>M20X19>M21X13>M20X18>M19X13>M21X18>M20X21>M19X24>M18X12>M20X14>M20X13>M22X25>M20X12>M20X15>M19X14>M18X22>M19X18>M20X17>M19X17>M19X16>M18X21>M17X20>M19X19>M18X13>M17X11>M18X17>M19X25>M18X15>M17X25>M18X19>M17X24>M16X19>M15X17>M17X21>M16X24>M18X23>M17X16>M16X25>M19X15>M18X25>M17X23>M16X23>M15X23>M18X14>M17X14>M16X14>M17X18>M16X13>M17X22>M16X12>M15X22>M14X16>M17X12>M16X22>M15X12>M16X11>M15X11>M16X15>M15X25>M14X15>M13X14>M15X18>M16X21>M15X16>M14X21>M15X14>M16X20>M15X13>M14X22>M15X20>M14X20>M13X20>M14X11>M15X19>M14X24>M13X19>M14X13>M13X18>M12X13>M15X24>M14X23>M13X12>M14X12>M13X11>M12X11>M11X11>M21X12>M20X11>M19X11>M18X11>M17X15>M16X18>M14X25>M14X19>M13X24>M13X23>M13X22>M12X12>M22X12>M21X15>M19X22>M18X20>M16X17>M14X14>M24X12>M23X23>M22X16>M21X14>M20X22>M18X24>M16X16>M26X12>M24X16>M23X11>M21X23>M19X20>M17X17>M27X12>M26X16>M25X22>M24X17>M23X18>M21X25>M19X12>M17X19>M15X21>M14X18>M13X13>M23X12>M21X19>M19X21>M17X13>M15X15>M25X12>M24X23>M22X24>M20X16>M18X18>M28X12>A150>C158>B112>A112>C167>B146>A146>C180>B180>A180>C143>B143>A115>C126>B126>A126>C190>B190>A190>C138>B138>A138>C174>B174>A102>C122>B122>A122>C162>B162>A162>C142>B142>A142>C102>B102>A174>C176>B176>A176>C115>B115>A143>C172>B172>A172>C187>B187>A187>C130>B130>A130>C118>B118>A118>C184>B184>A184>C171>B171>A171>C168>B182>A182>C182>B168>A168>C109>B109>A109>C159>B159>A159>C134>B134>A134>C146>B167>A167>C140>B140>A140>C163>B163>A163>C112>B158>A158>C164>B164>A164>C131>B131>A131>C188>B188>A188>C199>B199>A199>C114>B114>A114>C106>B106>A106>C200>B200>A200>C183>B183>A183>C152>B152>A152>C147>B147>A147>C150>B150>A198>C144>B144>A144>C191>B191>A191>C108>B108>A108>C139>B139>A139>C194>B194>A194>C166>B166>A166>C120>B120>A120>C123>B123>A123>C132>B132>A132>C107>B107>A107>C170>B170>A170>C198>B198>A156>C125>B125>A125>C121>B121>A121>C193>B193>A193>C197>B197>A197>C175>B175>A175>C196>B196>A196>C105>B105>A105>C181>B181>A181>C113>B113>A113>C137>B137>A137>C155>B155>A155>C156>B156>A110>C128>B128>A128>C179>B179>A179>C124>B124>A124>C151>B151>A151>C178>B178>A178>C104>B104>A104>C111>B111>A111>C148>B148>A148>C169>B169>A169>C129>B129>A129>C149>B149>A149>C189>B189>A189>C119>B119>A119>C154>B154>A154>C136>B136>A136>C135>B135>A135>C116>B116>A116>C145>B145>A145>C161>B161>A161>C173>B173>A173>C157>B157>A157>C195>B195>A195>C186>B186>A186>C160>B160>A160>C153>B153>A153>C117>B117>A117>C165>B165>A165>C101>B101>A101>C103>B103>A103>C192>B192>A192>C177>B177>A177>C185>B185>A185>C141>B141>A141>C133>B133>A133>C127>B127>A127>C110>B110>M14X17>M13X15>M13X16>M13X17>M12X17>M12X21>M12X25>M12X14>M13X25>M12X15>M13X21>M12X16>M12X18>M12X19>M12X20>M12X22>M12X23>M12X24>M11X25>M11X24>M11X23>M11X22>M11X21>M11X20>M11X19>M11X18>M11X17>M11X16>M11X15>M11X14>M11X13>M11X12>{}<M11X12<M11X13<M11X14<M11X15<M11X16<M11X17<M11X18<M11X19<M11X20<M11X21<M11X22<M11X23<M11X24<M11X25<M12X24<M12X23<M12X22<M12X20<M12X19<M12X18<M12X16<M13X21<M12X15<M13X25<M12X14<M12X25<M12X21<M12X17<M13X17<M13X16<M13X15<M14X17<B110<C110<A127<B127<C127<A133<B133<C133<A141<B141<C141<A185<B185<C185<A177<B177<C177<A192<B192<C192<A103<B103<C103<A101<B101<C101<A165<B165<C165<A117<B117<C117<A153<B153<C153<A160<B160<C160<A186<B186<C186<A195<B195<C195<A157<B157<C157<A173<B173<C173<A161<B161<C161<A145<B145<C145<A116<B116<C116<A135<B135<C135<A136<B136<C136<A154<B154<C154<A119<B119<C119<A189<B189<C189<A149<B149<C149<A129<B129<C129<A169<B169<C169<A148<B148<C148<A111<B111<C111<A104<B104<C104<A178<B178<C178<A151<B151<C151<A124<B124<C124<A179<B179<C179<A128<B128<C128<A110<B156<C156<A155<B155<C155<A137<B137<C137<A113<B113<C113<A181<B181<C181<A105<B105<C105<A196<B196<C196<A175<B175<C175<A197<B197<C197<A193<B193<C193<A121<B121<C121<A125<B125<C125<A156<B198<C198<A170<B170<C170<A107<B107<C107<A132<B132<C132<A123<B123<C123<A120<B120<C120<A166<B166<C166<A194<B194<C194<A139<B139<C139<A108<B108<C108<A191<B191<C191<A144<B144<C144<A198<B150<C150<A147<B147<C147<A152<B152<C152<A183<B183<C183<A200<B200<C200<A106<B106<C106<A114<B114<C114<A199<B199<C199<A188<B188<C188<A131<B131<C131<A164<B164<C164<A158<B158<C112<A163<B163<C163<A140<B140<C140<A167<B167<C146<A134<B134<C134<A159<B159<C159<A109<B109<C109<A168<B168<C182<A182<B182<C168<A171<B171<C171<A184<B184<C184<A118<B118<C118<A130<B130<C130<A187<B187<C187<A172<B172<C172<A143<B115<C115<A176<B176<C176<A174<B102<C102<A142<B142<C142<A162<B162<C162<A122<B122<C122<A102<B174<C174<A138<B138<C138<A190<B190<C190<A126<B126<C126<A115<B143<C143<A180<B180<C180<A146<B146<C167<A112<B112<C158<A150<M28X12<M18X18<M20X16<M22X24<M24X23<M25X12<M15X15<M17X13<M19X21<M21X19<M23X12<M13X13<M14X18<M15X21<M17X19<M19X12<M21X25<M23X18<M24X17<M25X22<M26X16<M27X12<M17X17<M19X20<M21X23<M23X11<M24X16<M26X12<M16X16<M18X24<M20X22<M21X14<M22X16<M23X23<M24X12<M14X14<M16X17<M18X20<M19X22<M21X15<M22X12<M12X12<M13X22<M13X23<M13X24<M14X19<M14X25<M16X18<M17X15<M18X11<M19X11<M20X11<M21X12<M11X11<M12X11<M13X11<M14X12<M13X12<M14X23<M15X24<M12X13<M13X18<M14X13<M13X19<M14X24<M15X19<M14X11<M13X20<M14X20<M15X20<M14X22<M15X13<M16X20<M15X14<M14X21<M15X16<M16X21<M15X18<M13X14<M14X15<M15X25<M16X15<M15X11<M16X11<M15X12<M16X22<M17X12<M14X16<M15X22<M16X12<M17X22<M16X13<M17X18<M16X14<M17X14<M18X14<M15X23<M16X23<M17X23<M18X25<M19X15<M16X25<M17X16<M18X23<M16X24<M17X21<M15X17<M16X19<M17X24<M18X19<M17X25<M18X15<M19X25<M18X17<M17X11<M18X13<M19X19<M17X20<M18X21<M19X16<M19X17<M20X17<M19X18<M18X22<M19X14<M20X15<M20X12<M22X25<M20X13<M20X14<M18X12<M19X24<M20X21<M21X18<M19X13<M20X18<M21X13<M20X19<M20X20<M21X22<M18X16<M19X23<M20X25<M21X16<M22X23<M21X17<M21X11<M22X13<M22X14<M20X24<M21X20<M21X21<M22X17<M23X20<M22X18<M23X16<M25X11<M22X22<M20X23<M21X24<M22X19<M23X25<M22X20<M23X21<M24X24<M22X21<M23X19<M24X11<M23X22<M24X15<M22X11<M23X14<M24X18<M23X15<M24X13<M23X24<M24X25<M23X17<M24X19<M25X14<M22X15<M23X13<M24X20<M25X24<M25X25<M24X21<M25X20<M25X21<M24X22<M25X15<M25X16<M26X25<M26X11<M25X23<M24X14<M25X19<M26X13<M26X15<M26X20<M25X17<M26X21<M25X18<M26X17<M27X22<M27X23<M26X18<M26X19<M27X16<M28X14<M25X13<M26X22<M27X17<M26X23<M27X13<M27X14<M27X15<M26X24<M27X24<M28X25<M27X11<M28X18<M27X25<M26X14<M27X19<M27X20<M28X13<M27X21<M28X23<M28X24<M28X22<M28X11<M28X17<M29X11<M27X18<M28X21<M28X16<M28X15<M28X20<M29X14<M29X25<M29X21<M28X19<M29X18<M29X17<M29X13<M29X24<M29X16<M29X23<M29X19<M30X25<M29X22<M30X21<M30X22<M29X12<M29X15<M30X18<M30X20<M30X24<M30X23<M29X20<M30X14<M30X13<M30X17<M30X12<M30X11<M30X16<M30X15<M30X19
> diff --git a/scripts/dso-ordering-test.py b/scripts/dso-ordering-test.py
> new file mode 100644
> index 0000000000..5dfb3476fa
> --- /dev/null
> +++ b/scripts/dso-ordering-test.py
> @@ -0,0 +1,1150 @@
> +#!/usr/bin/python3
> +# Generate testcase files and Makefile fragments for DSO sorting test
> +# Copyright (C) 2021 Free Software Foundation, Inc.
> +# This file is part of the GNU C Library.
> +#
> +# The GNU C Library is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU Lesser General Public
> +# License as published by the Free Software Foundation; either
> +# version 2.1 of the License, or (at your option) any later version.
> +#
> +# The GNU C Library is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> +# Lesser General Public License for more details.
> +#
> +# You should have received a copy of the GNU Lesser General Public
> +# License along with the GNU C Library; if not, see
> +# <http://www.gnu.org/licenses/>.
> +
> +"""Generate testcase files and Makefile fragments for DSO sorting test
> +
> +This script takes a small description string language, and generates
> +testcases for displaying the ELF dynamic linker's dependency sorting
> +behavior, allowing verification.
> +
> +Testcase descriptions are semicolon-separated description strings, and
> +this tool generates a testcase from the description, including main program,
> +associated modules, and Makefile fragments for including into elf/Makefile.
> +
> +This allows automation of what otherwise would be very laborous manual
> +construction of complex dependency cases, however it must be noted that this
> +is only a tool to speed up testcase construction, and thus the generation
> +features are largely mechanical in nature; inconsistencies or errors may occur
> +if the input description was itself erroronous or have unforeseen interactions.

I think it should be 'erroneous' instead.

> +
> +The format of the input test description files are:
> +
> +  # Each test description has a name, lines of description,
> +  # and an expected output specification. Comments use '#'.
> +  testname1: <test-description-line>
> +  output: <expected-output-string>
> +
> +  # Tests can be marked to be XFAIL by using 'xfail_output' instead
> +  testname2: <test-description-line>
> +  xfail_output: <expected-output-string>
> +
> +  # A default set of GLIBC_TUNABLES tunables can be specified, for which
> +  # all following tests will run multiple times, once for each of the
> +  # GLIBC_TUNABLES=... strings set by the 'tunable_option' command.
> +  tunable_option: <glibc-tunable-string1>
> +  tunable_option: <glibc-tunable-string2>
> +
> +  # Test descriptions can use multiple lines, which will all be merged
> +  # together, so order is not important.
> +  testname3: <test-description-line>
> +  <test-description-line>
> +  <test-description-line>
> +  ...
> +  output: <expected-output-string>
> +
> +  # 'testname3' will be run and compared two times, for both
> +  # GLIBC_TUNABLES=<glibc-tunable-string1> and
> +  # GLIBC_TUNABLES=<glibc-tunable-string2>. This can be cleared and reset by the
> +  # 'clear_tunables' command:
> +  clear_tunables
> +
> +  # Multiple expected outputs can also be specified, with an associated
> +  # tunable option in (), which multiple tests will be run with each
> +  # GLIBC_TUNABLES=... option tried.
> +  testname4:
> +  <test-description-line>
> +  ...
> +  output(<glibc-tunable-string1>): <expected-output-string-1>
> +  output(<glibc-tunable-string2>): <expected-output-string-2>
> +  # Individual tunable output cases can be XFAILed, though note that
> +  # this will have the effect of XFAILing the entire 'testname4' test
> +  # in the final top-level tests.sum summary.
> +  xfail_output(<glibc-tunable-string3>): <expected-output-string-3>
> +
> +  # When multiple outputs (with specific tunable strings) are specified,
> +  # these take priority over any active 'tunable_option' settings.
> +
> +  # When a test is meant to be placed under 'xtests' (not run under
> +  # "make check", but only when "make xtests" is used), the testcase name can be
> +  # declared using 'xtest(<test-name>)':
> +  ...
> +  xtest(test-too-big1): <test-description>
> +  output: <expected-output-string>
> +  ...
> +
> +  # Do note that under current elf/Makefile organization, for such a xtest case,
> +  # while the test execution is only run under 'make xtests', the associated
> +  # DSOs are always built even under 'make check'.
> +
> +On the description language used, an example description line string:
> +
> +  a->b!->[cdef];c=>g=>h;{+c;%c;-c}->a
> +
> +Each identifier represents a shared object module, currently sequences of
> +letters/digits are allowed, case-sensitive.
> +
> +All such shared objects have a constructor/destructor generated for them
> +that emits its name followed by a '>' for constructors, and '<' followed by
> +its name for destructors, e.g. if the name is 'obj1', then "obj1>" and "<obj1"
> +is printed by its constructor/destructor respectively.
> +
> +The -> operator specifies a link time dependency, these can be chained for
> +convenience (e.g. a->b->c->d).
> +
> +The => operator creates a call-reference, e.g. for a=>b, an fn_a() function
> +is created inside module 'a', which calls fn_b() in module 'b'.
> +These module functions emit 'name()' output in nested form,
> +e.g. a=>b emits 'a(b())'
> +
> +For single character object names, square brackets [] in the description
> +allows specifiying multiple objects; e.g. a->[bcd]->e is equivalent to

I think it should be 'specifying' here.

> + a->b->e;a->c->e;a->d->e
> +
> +The () parenthesis construct with space separated names is also allowed for
> +specifying objects. For names with integer suffixes a range can also be used,
> +e.g. (foo1 bar2-5), specifies DSOs foo1, bar2, bar2, bar3, bar4, bar5.
> +
> +A {} construct specifies the main test program, and its link dependencies
> +are also specified using ->. Inside {}, a few ;-seperated constructs are
> +allowed:
> +         +a   Loads module a using dlopen(RTLD_LAZY|RTLD_GLOBAL)
> +         ^a   Loads module a using dlopen(RTLD_LAZY)
> +         %a   Use dlsym() to load and call fn_a()
> +         @a   Calls fn_a() directly.
> +         -a   Unloads module a using dlclose()
> +
> +The generated main program outputs '{' '}' with all output from above
> +constructs in between. The other output before/after {} are the ordered
> +constructor/destructor output.
> +
> +If no {} construct is present, a default empty main program is linked
> +against all objects which have no dependency linked to it. e.g. for
> +'[ab]->c;d->e', the default main program is equivalent to '{}->[abd]'
> +
> +Sometimes for very complex or large testcases, besides specifying a
> +few explicit dependencies from main{}, the above default dependency
> +behavior is still useful to automatically have, but is turned off
> +upon specifying a single explicit {}->dso_name.
> +In this case, add {}->* to explicitly add this generation behavior:
> +
> +   # Main program links to 'foo', and all other objects which have no
> +   # dependency linked to it.
> +   {}->foo,{}->*
> +
> +Note that '*' works not only on main{}, but can be used as the
> +dependency target of any object. Note that it only works as a target,
> +not a dependency source.
> +
> +The '!' operator after object names turns on permutation of its
> +dependencies, e.g. while a->[bcd] only generates one set of objects,
> +with 'a.so' built with a link line of "b.so c.so d.so", for a!->[bcd]
> +permutations of a's dependencies creates multiple testcases with
> +different link line orders: "b.so c.so d.so", "c.so b.so d.so",
> +"b.so d.so c.so", etc. Note that for a <test-name> specified on
> +the script command-line, multiple <test-name_1>, <test-name_2>, etc.
> +tests will be generated (e.g. for a!->[bc]!->[de], eight tests with
> +different link orders for a, b, and c will be generated)
> +
> +It is possible to specify the ELF soname field for an object or the
> +main program:
> +   # DSO 'a' will be linked with the appropriate -Wl,-soname=x setting
> +   a->b->c;soname(a)=x
> +   # The the main program can also have a soname specified
> +   soname({})=y
> +
> +This can be used to test how ld.so behaves when objects and/or the
> +main program have such a field set.
> +
> +
> +Strings Output by Generated Testcase Programs
> +
> +The text output produced by a generated testcase consists of three main
> +parts:
> +  1. The constructors' output
> +  2. Output from the main program
> +  3. Destructors' output
> +
> +To see by example, a simple test description "a->b->c" generates a testcase
> +that when run, outputs: "c>b>a>{}<a<b<c"
> +
> +Each generated DSO constructor prints its name followed by a '>' character,
> +and the "c>b>a" part above is the full constructor output by all DSOs, the
> +order indicating that DSO 'c', which does not depend on any other DSO, has
> +its constructor run first, followed by 'b' and then 'a'.
> +
> +Destructor output for each DSO is a '<' character followed by its name,
> +reflecting its reverse nature of constructors. In the above example, the
> +destructor output part is "<a<b<c".
> +
> +The middle "{}" part is the main program. In this simple example, nothing
> +was specified for the main program, so by default it is implicitly linked
> +to the DSO 'a' (with no other DSOs depending on it) and only prints the
> +brackets {} with no actions inside.
> +
> +To see an example with actions inside the main program, lets see an example
> +description: c->g=>h;{+c;%c;-c}->a->h
> +
> +This produces a testcase, that when executed outputs:
> +             h>a>{+c[g>c>];%c();-c[<c<g];}<a<h
> +
> +The constructor and destructor parts display the a->h dependency as expected.
> +Inside the main program, the "+c" action triggers a dlopen() of DSO 'c',
> +causing another chain of constructors "g>c>" to be triggered. Here it is
> +displayed inside [] brackets for each dlopen call. The same is done for "-c",
> +a dlclose() of 'c'.
> +
> +The "%c" output is due to calling to fn_c() inside DSO 'c', this comprises
> +of two parts: the '%' character is printed by the caller, here it is the main
> +program. The 'c' character is printed from inside fn_c(). The '%' character
> +indicates that this is called by a dlsym() of "fn_c". A '@' character would
> +mean a direct call (with a symbol reference). These can all be controlled
> +by the main test program constructs documented earlier.
> +
> +The output strings described here is the exact same form placed in
> +test description files' "output: <expected output>" line.
> +
> +

Extra newline here.

> +"""

This is a quite thoughtfully and complete description, the only requirement
is regarding style: two space after period.

Maybe a new line between the script desciption and the imports.

> +import sys
> +import re
> +import os
> +import subprocess
> +import argparse
> +from collections import OrderedDict
> +import itertools
> +
> +# BUILD_GCC is only used under the --build option,
> +# which builds the generated testcase, including DSOs using BUILD_GCC.
> +# Mainly for testing purposes, especially debugging of this script,
> +# and can be changed here to another toolchain path if needed.
> +build_gcc = "gcc"
> +
> +parser = argparse.ArgumentParser("")
> +parser.add_argument("description",
> +                    help="Description string of DSO dependency test to be "
> +                    "generated (see script source for documentation of "
> +                    "description language), either specified here as "
> +                    "command line argument, or by input file using "
> +                    "-f/--description-file option",
> +                    nargs="?", default="")
> +parser.add_argument("test_name", help="Identifier for testcase being "
> +                    "generated", nargs="?", default="")
> +parser.add_argument("--objpfx",
> +                    help="Path to place generated files, defaults to "
> +                    "current directory if none specified",
> +                    nargs="?", default="./")
> +parser.add_argument("-m", "--output-makefile",
> +                    help="File to write Makefile fragment to, defaults to "
> +                    "stdout when option not present", nargs="?", default="")
> +parser.add_argument("-f", "--description-file",
> +                    help="Input file containing testcase descriptions",
> +                    nargs="?", default="")
> +parser.add_argument("--build", help="After C testcase generated, build it "
> +                    "using gcc (for manual testing purposes)",
> +                    action="store_true")
> +parser.add_argument("--debug-output", help="Prints some internal data "
> +                    "structures; used for debugging of this script",
> +                    action="store_true")
> +cmdlineargs = parser.parse_args()

I think it is better to follow other script that construct the argparser
on a specific function (usually get_parser).

> +test_name = cmdlineargs.test_name
> +description = cmdlineargs.description
> +objpfx = cmdlineargs.objpfx
> +description_file = cmdlineargs.description_file
> +output_makefile = cmdlineargs.output_makefile
> +makefile = ""
> +default_tunable_options = []
> +
> +current_input_lineno = 0
> +def error(msg):
> +    global current_input_lineno
> +    print("Error: %s%s" % ((("Line %d, " % current_input_lineno)
> +                            if current_input_lineno != 0 else ""),
> +                           msg))
> +    exit(1)
> +
> +if(test_name or description) and description_file:
> +    error("both command-line testcase and input file specified")
> +if test_name and not description:
> +    error("command-line testcase name without description string")

The way you structured this script is somewhat confusing, where there is 
an initial argument setup and the variables are accessed through globals
over the functions below.  It is not the usual way we are doing python
scripts, where we adds a main() function and handle '__main__' explicitly.

Trying to follow the usual pattern would require some internal code
organizations that I don't think would add much; so it current way should
be fine.

Maybe add a comment where the main script starts.

> +
> +# Main class type describing a testcase.
> +class TestDescr:
> +    def __init__(self):
> +        self.objs = []              # list of all DSO objects
> +        self.deps = OrderedDict()   # map of DSO object -> list of dependencies
> +
> +        # map of DSO object -> list of call refs
> +        self.callrefs = OrderedDict()
> +
> +        # map of DSO object -> list of permutations of dependencies
> +        self.dep_permutations = OrderedDict()
> +
> +        # map of DSO object -> SONAME of object (if one is specified)
> +        self.soname_map = OrderedDict()
> +
> +        # list of main program operations
> +        self.main_program = []
> +        # set if main program needs -ldl

There is no need to handle libdl anymore, libdl functions are provided by libc.

> +        self.main_program_needs_ldl = False
> +        # set if default dependencies added to main
> +        self.main_program_default_deps = True
> +
> +        self.test_name = ""                   # name of testcase
> +        self.expected_outputs = OrderedDict() # expected outputs of testcase
> +        self.xfail = False                    # set if this is a XFAIL testcase
> +        self.xtest = False                    # set if this is put under 'xtests'
> +
> +    # Add 'object -> [object, object, ...]' relations to CURR_MAP
> +    def __add_deps_internal(self, src_objs, dst_objs, curr_map):
> +        for src in src_objs:
> +            for dst in dst_objs:
> +                if not src in curr_map:
> +                    curr_map[src] = []
> +                if not dst in curr_map[src]:
> +                    curr_map[src].append(dst)
> +    def add_deps(self, src_objs, dst_objs):
> +        self.__add_deps_internal(src_objs, dst_objs, self.deps)
> +    def add_callrefs(self, src_objs, dst_objs):
> +        self.__add_deps_internal(src_objs, dst_objs, self.callrefs)

Ok.

> +
> +# Process commands inside the {} construct.
> +# Note that throughout this script, the main program object is represented
> +# by the '#' string.
> +def process_main_program(test_descr, mainprog_str):
> +    if mainprog_str:
> +        test_descr.main_program = mainprog_str.split(';')
> +    for s in test_descr.main_program:
> +        m = re.match(r"^([+\-%^@])([0-9a-zA-Z]+)$", s)
> +        if not m:
> +            error("'%s' is not recognized main program operation" % (s))
> +        opr = m.group(1)
> +        if(opr == '+' or opr == '^' or opr == '%' or opr == '-'):
> +            # Determined the main program needs libdl
> +            test_descr.main_program_needs_ldl = True

There is no need to handle libdl anymore.

> +        obj = m.group(2)
> +        if not obj in test_descr.objs:
> +            test_descr.objs.append(obj)
> +        if opr == '%' or opr == '@':
> +            test_descr.add_callrefs(['#'], [obj])
> +    # We have a main program specified, turn this off
> +    test_descr.main_program_default_deps = False
> +

Ok.

> +# For(a1 a2 b1-12) object set descriptions, expand into an object list
> +def expand_object_set_string(descr_str):
> +    obj_list = []
> +    descr_list = descr_str.split()
> +    for descr in descr_list:
> +        m = re.match(r"^([a-zA-Z][0-9a-zA-Z]*)(-[0-9]+)?$", descr)
> +        if not m:
> +            error("'%s' is not a valid object set description" % (descr))
> +        obj = m.group(1)
> +        idx_end = m.group(2)
> +        if not idx_end:
> +            if not obj in obj_list:
> +                obj_list.append(obj)
> +        else:
> +            idx_end = int(idx_end[1:])
> +            m = re.match(r"^([0-9a-zA-Z][a-zA-Z]*)([0-9]+)$", obj)
> +            if not m:
> +                error("object description '%s' is malformed" % (obj))
> +            obj_name = m.group(1)
> +            idx_start = int(m.group (2))
> +            if idx_start > idx_end:
> +                error("index range %s-%s invalid" % (idx_start, idx_end))
> +            for i in range(idx_start, idx_end + 1):
> +                o = obj_name + str(i)
> +                if not o in obj_list:
> +                    obj_list.append(o)
> +    return obj_list

Ok.

> +
> +# Lexer for tokens
> +tokenspec = [ ("SONAME",   r"soname\(([0-9a-zA-Z{}]+)\)=([0-9a-zA-Z]+)"),
> +              ("OBJ",      r"([0-9a-zA-Z]+)"),
> +              ("DEP",      r"->"),
> +              ("CALLREF",  r"=>"),
> +              ("OBJSET",   r"\[([0-9a-zA-Z]+)\]"),
> +              ("OBJSET2",  r"\(([0-9a-zA-Z \-]+)\)"),
> +              ("OBJSET3",  r"\*"),
> +              ("PROG",     r"{([0-9a-zA-Z;+^\-%@]*)}"),
> +              ("PERMUTE",  r"!"),
> +              ("SEMICOL",  r";"),
> +              ("ERROR",    r".") ]
> +tok_re = '|'.join('(?P<%s>%s)' % pair for pair in tokenspec)
> +

Ok.

> +# Main line parser of description language
> +def parse_description_string(t, descr_str):
> +

Spurious newline?

> +    # State used when parsing dependencies
> +    curr_objs = []
> +    in_dep = False
> +    in_callref = False
> +    def clear_dep_state():
> +        nonlocal in_dep, in_callref
> +        in_dep = in_callref = False
> +
> +    for m in re.finditer(tok_re, descr_str):
> +        kind = m.lastgroup
> +        value = m.group()
> +        if kind == "SONAME":
> +            s = re.match(r"soname\(([0-9a-zA-Z{}]+)\)=([0-9a-zA-Z]+)", value)
> +            obj = s.group(1)
> +            val = s.group(2)
> +            if obj == "{}":
> +                if '#' in t.soname_map:
> +                    error("soname of main program already set")
> +                # Adjust to internal name
> +                obj = '#'
> +            else:
> +                if re.match(r"[{}]", obj):
> +                    error("invalid object name '%s'" % (obj))
> +                if not obj in t.objs:
> +                    error("'%s' is not name of already defined object" % (obj))
> +                if obj in t.soname_map:
> +                    error("'%s' already has soname of '%s' set"
> +                          % (obj, t.soname_map[obj]))
> +            t.soname_map[obj] = val
> +
> +        elif kind == "OBJ":
> +            if in_dep:
> +                t.add_deps(curr_objs, [value])
> +            elif in_callref:
> +                t.add_callrefs(curr_objs, [value])
> +            clear_dep_state()
> +            curr_objs = [value]
> +            if not value in t.objs:
> +                t.objs.append(value)
> +
> +        elif kind == "OBJSET":
> +            objset = value[1:len(value)-1]
> +            if in_dep:
> +                t.add_deps(curr_objs, list (objset))
> +            elif in_callref:
> +                t.add_callrefs(curr_objs, list (objset))
> +            clear_dep_state()
> +            curr_objs = list(objset)
> +            for o in list(objset):
> +                if not o in t.objs:
> +                    t.objs.append(o)
> +
> +        elif kind == "OBJSET2":
> +            descr_str = value[1:len(value)-1]
> +            descr_str.strip()
> +            objs = expand_object_set_string(descr_str)
> +            if not objs:
> +                error("empty object set '%s'" % (value))
> +            if in_dep:
> +                t.add_deps(curr_objs, objs)
> +            elif in_callref:
> +                t.add_callrefs(curr_objs, objs)
> +            clear_dep_state()
> +            curr_objs = objs
> +            for o in objs:
> +                if not o in t.objs:
> +                    t.objs.append(o)
> +
> +        elif kind == "OBJSET3":
> +            if in_dep:
> +                t.add_deps(curr_objs, ['*'])
> +            elif in_callref:
> +                t.add_callrefs(curr_objs, ['*'])
> +            else:
> +                error("non-dependence target set '*' can only be used "
> +                      "as target of ->/=> operations")
> +            clear_dep_state()
> +            curr_objs = ['*']
> +
> +        elif kind == "PERMUTE":
> +            if in_dep or in_callref:
> +                error("syntax error, permute operation invalid here")
> +            if not curr_objs:
> +                error("syntax error, no objects to permute here")
> +
> +            for obj in curr_objs:
> +                if not obj in t.dep_permutations:
> +                    # Signal this object has permuted dependencies
> +                    t.dep_permutations[obj] = []
> +
> +        elif kind == "PROG":
> +            if t.main_program:
> +                error("cannot have more than one main program")
> +            if in_dep:
> +                error("objects cannot have dependency on main program")
> +            if in_callref:
> +                # TODO: A DSO can resolve to a symbol in the main binary,
> +                # which we syntactically allow here, but haven't yet
> +                # implemented.
> +                t.add_callrefs(curr_objs, ["#"])
> +            process_main_program(t, value[1:len(value)-1])
> +            clear_dep_state()
> +            curr_objs = ["#"]
> +
> +        elif kind == "DEP":
> +            if in_dep or in_callref:
> +                error("syntax error, multiple contiguous ->,=> operations")
> +            if '*' in curr_objs:
> +                error("non-dependence target set '*' can only be used "
> +                      "as target of ->/=> operations")
> +            in_dep = True
> +
> +        elif kind == "CALLREF":
> +            if in_dep or in_callref:
> +                error("syntax error, multiple contiguous ->,=> operations")
> +            if '*' in curr_objs:
> +                error("non-dependence target set '*' can only be used "
> +                      "as target of ->/=> operations")
> +            in_callref = True
> +
> +        elif kind == "SEMICOL":
> +            curr_objs = []
> +            clear_dep_state()
> +
> +        else:
> +            error("unknown token '%s'" % (value))
> +    return t
> +

Ok.

> +
> +
> +def process_testcase(t):
> +    global objpfx
> +    assert t.test_name
> +
> +    base_test_name = t.test_name
> +    test_subdir = base_test_name + "-dir"
> +    testpfx = objpfx + test_subdir + "/"
> +
> +    if not os.path.exists(testpfx):
> +        os.mkdir(testpfx)
> +
> +    def find_objs_not_depended_on(t):
> +        objs_not_depended_on = []
> +        for obj in t.objs:
> +            skip = False
> +            for r in t.deps.items():
> +                if obj in r[1]:
> +                    skip = True
> +                    break
> +            if not skip:
> +                objs_not_depended_on.append(obj)
> +        return objs_not_depended_on
> +
> +    non_dep_tgt_objs = find_objs_not_depended_on(t)
> +    for obj in t.objs:
> +        if obj in t.deps:
> +            deps = t.deps[obj]
> +            if '*' in deps:
> +                t.deps[obj].remove('*')
> +                t.add_deps([obj], non_dep_tgt_objs)
> +        if obj in t.callrefs:
> +            deps = t.callrefs[obj]
> +            if '*' in deps:
> +                t.deps[obj].remove('*')
> +                t.add_callrefs([obj], non_dep_tgt_objs)
> +    if "#" in t.deps:
> +        deps = t.deps["#"]
> +        if '*' in deps:
> +            t.deps["#"].remove('*')
> +            t.add_deps(["#"], non_dep_tgt_objs)
> +
> +    # If no main program was specified in dependency description, make a
> +    # default main program with deps pointing to all DSOs which are not
> +    # depended by another DSO.
> +    if t.main_program_default_deps:
> +        main_deps = non_dep_tgt_objs
> +        if not main_deps:
> +            error("no objects for default main program to point "
> +                  "dependency to(all objects strongly connected?)")
> +        t.add_deps(["#"], main_deps)
> +
> +    # Some debug output
> +    if cmdlineargs.debug_output:
> +        print("Testcase: %s" % (t.test_name))
> +        print("All objects: %s" % (t.objs))
> +        print("--- Static link dependencies ---")
> +        for r in t.deps.items():
> +            print("%s -> %s" % (r[0], r[1]))
> +        print("--- Objects whose dependencies are to be permuted ---")
> +        for r in t.dep_permutations.items():
> +            print("%s" % (r[0]))
> +        print("--- Call reference dependencies ---")
> +        for r in t.callrefs.items():
> +            print("%s => %s" % (r[0], r[1]))
> +        print("--- main program ---")
> +        print(t.main_program)

Ok.

> +
> +    # Main testcase generation routine, does Makefile fragment generation,
> +    # testcase source generation, and if --build specified builds testcase.
> +    def generate_testcase(test_descr, test_suffix):
> +
> +        test_name = test_descr.test_name + test_suffix
> +
> +        # Print out needed Makefile fragments for use in glibc/elf/Makefile.
> +        module_names = ""
> +        for o in test_descr.objs:
> +            module_names += " " + test_subdir + "/" + test_name + "-" + o
> +        makefile.write("modules-names +=%s\n" % (module_names))
> +
> +        # Depth-first traversal, executing FN(OBJ) in post-order
> +        def dfs(t, fn):
> +            def dfs_rec(obj, fn, obj_visited):
> +                if obj in obj_visited:
> +                    return
> +                obj_visited[obj] = True
> +                if obj in t.deps:
> +                    for dep in t.deps[obj]:
> +                        dfs_rec(dep, fn, obj_visited)
> +                fn(obj)
> +
> +            obj_visited = {}
> +            for obj in t.objs:
> +                dfs_rec(obj, fn, obj_visited)
> +
> +        # Generate link dependencies for all DSOs, done in a DFS fashion.
> +        # Usually this doesn't need to be this complex, just listing the direct
> +        # dependencies is enough. However to support creating circular
> +        # dependency situations, traversing it by DFS and tracking processing
> +        # status is the natural way to do it.
> +        obj_processed = {}
> +        fake_created = {}
> +        def gen_link_deps(obj):
> +            if obj in test_descr.deps:
> +                dso = test_subdir + "/" + test_name + "-" + obj + ".so"
> +                dependencies = ""
> +                for dep in test_descr.deps[obj]:
> +                    if dep in obj_processed:
> +                        depstr = (" $(objpfx)" + test_subdir + "/"
> +                                  + test_name + "-" + dep + ".so")
> +                    else:
> +                        # A circular dependency is satisfied by making a
> +                        # fake DSO tagged with the correct SONAME
> +                        depstr = (" $(objpfx)" + test_subdir + "/"
> +                                  + test_name + "-" + dep + ".FAKE.so")
> +                        # Create empty C file and Makefile fragments for fake
> +                        # object. This only needs to be done at most once for
> +                        # an object name.
> +                        if not dep in fake_created:
> +                            f = open(testpfx + test_name + "-" + dep
> +                                     + ".FAKE.c", "w")
> +                            f.write(" \n")
> +                            f.close()
> +                            # Generate rule to create fake object
> +                            makefile.write \
> +                                ("LDFLAGS-%s = -Wl,--no-as-needed "
> +                                 "-Wl,-soname=%s\n"
> +                                 % (test_name + "-" + dep + ".FAKE.so",
> +                                    ("$(objpfx)" + test_subdir + "/"
> +                                     + test_name + "-" + dep + ".so")))
> +                            makefile.write \
> +                                ("modules-names += %s\n"
> +                                 % (test_subdir + "/"
> +                                    + test_name + "-" + dep + ".FAKE"))
> +                            fake_created[dep] = True
> +                    dependencies += depstr
> +                makefile.write("$(objpfx)%s:%s\n" % (dso, dependencies))
> +            # Mark obj as processed
> +            obj_processed[obj] = True
> +
> +        dfs(test_descr, gen_link_deps)
> +

Ok.

> +        # Print LDFLAGS-* and *-no-z-defs
> +        for o in test_descr.objs:
> +            dso = test_name + "-" + o + ".so"
> +            ldflags = "-Wl,--no-as-needed"
> +            if o in test_descr.soname_map:
> +                soname = ("$(objpfx)" + test_subdir + "/"
> +                          + test_name + "-"
> +                          + test_descr.soname_map[o] + ".so")
> +                ldflags += (" -Wl,-soname=" + soname)
> +            makefile.write("LDFLAGS-%s = %s\n" % (dso, ldflags))
> +            if o in test_descr.callrefs:
> +                makefile.write("%s-no-z-defs = yes\n" % (dso))
> +
> +        # Print dependencies for main test program.
> +        depstr = ""
> +        if '#' in test_descr.deps:
> +            for o in test_descr.deps['#']:
> +                depstr += (" $(objpfx)" + test_subdir + "/"
> +                           + test_name + "-" + o + ".so")
> +        if test_descr.main_program_needs_ldl:
> +            depstr += " $(libdl)"

There is no need to handle libdl anymore.

> +        makefile.write("$(objpfx)%s/%s:%s\n" % (test_subdir, test_name, depstr))
> +        ldflags = "-Wl,--no-as-needed"
> +        if '#' in test_descr.soname_map:
> +            soname = ("$(objpfx)" + test_subdir + "/"
> +                      + test_name + "-"
> +                      + test_descr.soname_map['#'] + ".so")
> +            ldflags += (" -Wl,-soname=" + soname)
> +        makefile.write("LDFLAGS-%s = %s\n" % (test_name, ldflags))
> +
> +        not_depended_objs = find_objs_not_depended_on(test_descr)
> +        if not_depended_objs:
> +            depstr = ""
> +            for dep in not_depended_objs:
> +                depstr += (" $(objpfx)" + test_subdir + "/"
> +                           + test_name + "-" + dep + ".so")
> +            makefile.write("$(objpfx)%s.out:%s\n" % (base_test_name, depstr))
> +
> +        # Add main executable to test-srcs
> +        makefile.write("test-srcs += %s/%s\n" % (test_subdir, test_name))
> +        # Add dependency on main executable of test
> +        makefile.write("$(objpfx)%s.out: $(objpfx)%s/%s\n"
> +                        % (base_test_name, test_subdir, test_name))
> +
> +        for r in test_descr.expected_outputs.items():
> +            tunable_options = []
> +            specific_tunable = r[0]
> +            xfail = r[1][1]
> +            if specific_tunable != "":
> +                tunable_options = [specific_tunable]
> +            else:
> +                tunable_options = default_tunable_options
> +                if not tunable_options:
> +                    tunable_options = [""]
> +
> +            for tunable in tunable_options:
> +                tunable_env = ""
> +                tunable_sfx = ""
> +                exp_tunable_sfx = ""
> +                if tunable:
> +                    tunable_env = "GLIBC_TUNABLES=%s " % tunable
> +                    tunable_sfx = "-" + tunable.replace("=","_")
> +                if specific_tunable:
> +                    tunable_sfx = "-" + specific_tunable.replace("=","_")
> +                    exp_tunable_sfx = tunable_sfx
> +                tunable_descr = ("(%s)" % tunable_env.strip()
> +                                 if tunable_env else "")
> +                # Write out fragment of shell script for this single test.
> +                test_descr.sh.write \
> +                    ("%s${test_wrapper_env} ${run_program_env} \\\n"
> +                     "${common_objpfx}support/test-run-command \\\n"
> +                     "${common_objpfx}elf/ld.so \\\n"
> +                     "--library-path ${common_objpfx}elf/%s:"
> +                     "${common_objpfx}elf:${common_objpfx}.:"
> +                     "${common_objpfx}dlfcn \\\n"
> +                     "${common_objpfx}elf/%s/%s > \\\n"
> +                     "  ${common_objpfx}elf/%s/%s%s.output\n"
> +                     % (tunable_env ,test_subdir,
> +                        test_subdir, test_name, test_subdir, test_name,
> +                        tunable_sfx))
> +                # Generate a run of each test and compare with expected out
> +                test_descr.sh.write \
> +                    ("if [ $? -ne 0 ]; then\n"
> +                     "  echo '%sFAIL: %s%s execution test'\n"
> +                     "  something_failed=true\n"
> +                     "else\n"
> +                     "  diff -wu ${common_objpfx}elf/%s/%s%s.output \\\n"
> +                     "           ${common_objpfx}elf/%s/%s%s.exp\n"
> +                     "  if [ $? -ne 0 ]; then\n"
> +                     "    echo '%sFAIL: %s%s expected output comparison'\n"
> +                     "    something_failed=true\n"
> +                     "  fi\n"
> +                     "fi\n"
> +                     % (("X" if xfail else ""), test_name, tunable_descr,
> +                        test_subdir, test_name, tunable_sfx,
> +                        test_subdir, base_test_name, exp_tunable_sfx,
> +                        ("X" if xfail else ""), test_name, tunable_descr))
> +
> +        # Generate C files according to dependency and calling relations from
> +        # description string.
> +        for obj in test_descr.objs:
> +            src_name = test_name + "-" + obj + ".c"
> +            f = open(testpfx + src_name, "w")
> +            if obj in test_descr.callrefs:
> +                called_objs = test_descr.callrefs[obj]
> +                for callee in called_objs:
> +                    f.write("extern void fn_%s (void);\n" % (callee))
> +            if len(obj) == 1:
> +                f.write("extern int putchar(int);\n")
> +                f.write("static void __attribute__((constructor)) " +
> +                         "init(void){putchar('%s');putchar('>');}\n" % (obj))
> +                f.write("static void __attribute__((destructor)) " +
> +                         "fini(void){putchar('<');putchar('%s');}\n" % (obj))
> +            else:
> +                f.write('extern int printf(const char *, ...);\n')
> +                f.write('static void __attribute__((constructor)) ' +
> +                         'init(void){printf("%s>");}\n' % (obj))
> +                f.write('static void __attribute__((destructor)) ' +
> +                         'fini(void){printf("<%s");}\n' % (obj))
> +            if obj in test_descr.callrefs:
> +                called_objs = test_descr.callrefs[obj]
> +                if len(obj) != 1:
> +                    f.write("extern int putchar(int);\n")
> +                f.write("void fn_%s (void) {\n" % (obj))
> +                if len(obj) == 1:
> +                    f.write("  putchar ('%s');\n" % (obj));
> +                    f.write("  putchar ('(');\n");
> +                else:
> +                    f.write('  printf ("%s(");\n' % (obj));
> +                for callee in called_objs:
> +                    f.write("  fn_%s ();\n" % (callee))
> +                f.write("  putchar (')');\n");
> +                f.write("}\n")
> +            else:
> +                for callref in test_descr.callrefs.items():
> +                    if obj in callref[1]:
> +                        if len(obj) == 1:
> +                            # We need to declare printf here in this case.
> +                            f.write('extern int printf(const char *, ...);\n')
> +                        f.write("void fn_%s (void) {\n" % (obj))
> +                        f.write('  printf ("%s()");\n' % (obj))
> +                        f.write("}\n")
> +                        break
> +            f.close()
> +
> +        # Open C file for writing main program
> +        f = open(testpfx + test_name + ".c", "w")
> +
> +        # if there are some operations in main(), it means we need -ldl
> +        if test_descr.main_program_needs_ldl:
> +            f.write("#include <dlfcn.h>\n")

There is no need to handle libdl anymore, just include the hader regardless. 

> +        f.write("#include <stdio.h>\n")
> +        f.write("#include <stdlib.h>\n")
> +        for s in test_descr.main_program:
> +            if s[0] == '@':
> +                f.write("extern void fn_%s (void);\n" % (s[1:]));
> +        f.write("int main (void) {\n")
> +        f.write("  putchar('{');\n")
> +
> +        # Helper routine for generating sanity checking code.
> +        def put_fail_check(fail_cond, action_desc):
> +            f.write('  if (%s) { printf ("\\n%s failed: %%s\\n", '
> +                     'dlerror()); exit (1);}\n' % (fail_cond, action_desc))
> +        i = 0
> +        while i < len(test_descr.main_program):
> +            s = test_descr.main_program[i]
> +            obj = s[1:]
> +            dso = test_name + "-" + obj
> +            if s[0] == '+' or s[0] == '^':
> +                if s[0] == '+':
> +                    dlopen_flags = "RTLD_LAZY|RTLD_GLOBAL"
> +                    f.write("  putchar('+');\n");
> +                else:
> +                    dlopen_flags = "RTLD_LAZY"
> +                    f.write("  putchar(':');\n");
> +                if len(obj) == 1:
> +                    f.write("  putchar('%s');\n" % (obj));
> +                else:
> +                    f.write('  printf("%s");\n' % (obj));
> +                f.write("  putchar('[');\n");
> +                f.write('  void *%s = dlopen ("%s.so", %s);\n'
> +                         % (obj, dso, dlopen_flags))
> +                put_fail_check("!%s" % (obj),
> +                                "%s.so dlopen" % (dso))
> +                f.write("  putchar(']');\n");
> +            elif s[0] == '-':
> +                f.write("  putchar('-');\n");
> +                if len(obj) == 1:
> +                    f.write("  putchar('%s');\n" % (obj));
> +                else:
> +                    f.write('  printf("%s");\n' % (obj));
> +                f.write("  putchar('[');\n");
> +                put_fail_check("dlclose (%s) != 0" % (obj),
> +                                "%s.so dlclose" % (dso))
> +                f.write("  putchar(']');\n");
> +            elif s[0] == '%':
> +                f.write("  putchar('%');\n");
> +                f.write('  void (*fn_%s)(void) = dlsym (%s, "fn_%s");\n'
> +                         % (obj, obj, obj))
> +                put_fail_check("!fn_%s" % (obj),
> +                                "dlsym(fn_%s) from %s.so" % (obj, dso))
> +                f.write("  fn_%s ();\n" % (obj))
> +            elif s[0] == '@':
> +                f.write("  putchar('@');\n");
> +                f.write("  fn_%s ();\n" % (obj))
> +            f.write("  putchar(';');\n");
> +            i += 1
> +        f.write("  putchar('}');\n")
> +        f.write("  return 0;\n")
> +        f.write("}\n")
> +        f.close()
> +
> +        # --build option processing: build generated sources using 'build_gcc'
> +        if cmdlineargs.build:
> +            # Helper routine to run a shell command, for running GCC below
> +            def run_cmd(args):
> +                cmd = str.join(' ', args)
> +                if cmdlineargs.debug_output:
> +                    print(cmd)
> +                p = subprocess.Popen(args)
> +                p.wait()
> +                if p.returncode != 0:
> +                    error("error running command: %s" % (cmd))
> +
> +            # Compile individual .os files
> +            for obj in test_descr.objs:
> +                src_name = test_name + "-" + obj + ".c"
> +                obj_name = test_name + "-" + obj + ".os"
> +                run_cmd([build_gcc, "-c", "-fPIC", testpfx + src_name,
> +                          "-o", testpfx + obj_name])
> +
> +            obj_processed = {}
> +            fake_created = {}
> +            # Function to create <test_name>-<obj>.so
> +            def build_dso(obj):
> +                obj_name = test_name + "-" + obj + ".os"
> +                dso_name = test_name + "-" + obj + ".so"
> +                deps = []
> +                if obj in test_descr.deps:
> +                    for dep in test_descr.deps[obj]:
> +                        if dep in obj_processed:
> +                            deps.append(dep)
> +                        else:
> +                            deps.append(dep + ".FAKE")
> +                            if not dep in fake_created:
> +                                base_name = testpfx + test_name + "-" + dep
> +                                cmd = [build_gcc, "-Wl,--no-as-needed",
> +                                       ("-Wl,-soname=" + base_name + ".so"),
> +                                       "-shared", base_name + ".FAKE.c",
> +                                       "-o", base_name + ".FAKE.so"]
> +                                run_cmd(cmd)
> +                                fake_created[dep] = True
> +                dso_deps = map(lambda d: testpfx + test_name + "-" + d + ".so",
> +                               deps)
> +                cmd = [build_gcc, "-shared", "-o", testpfx + dso_name,
> +                       testpfx + obj_name, "-Wl,--no-as-needed"]
> +                if obj in test_descr.soname_map:
> +                    soname = ("-Wl,-soname=" + testpfx + test_name + "-"
> +                              + test_descr.soname_map[obj] + ".so")
> +                    cmd += [soname]
> +                cmd += list(dso_deps)
> +                run_cmd(cmd)
> +                obj_processed[obj] = True
> +
> +            # Build all DSOs, this needs to be in topological dependency order,
> +            # or link will fail
> +            dfs(test_descr, build_dso)
> +
> +            # Build main program
> +            deps = []
> +            if '#' in test_descr.deps:
> +                deps = test_descr.deps['#']
> +            main_deps = map(lambda d: testpfx + test_name + "-" + d + ".so",
> +                            deps)
> +            cmd = [build_gcc, "-Wl,--no-as-needed", "-o", testpfx + test_name,
> +                   testpfx + test_name + ".c", "-L%s" % (os.getcwd()),
> +                   "-Wl,-rpath-link=%s" % (os.getcwd())]
> +            if '#' in test_descr.soname_map:
> +                soname = ("-Wl,-soname=" + testpfx + test_name + "-"
> +                          + test_descr.soname_map['#'] + ".so")
> +                cmd += [soname]
> +            cmd += list(main_deps)
> +            if test_descr.main_program_needs_ldl:
> +                cmd += ["-ldl"]

There is no need to handle libdl anymore.

> +            run_cmd(cmd)
> +
> +    # Check if we need to enumerate permutations of dependencies
> +    need_permutation_processing = False
> +    if t.dep_permutations:
> +        # Adjust dep_permutations into map of object -> dependency permutations
> +        for r in t.dep_permutations.items():
> +            obj = r[0]
> +            if obj in t.deps and len(t.deps[obj]) > 1:
> +                deps = t.deps[obj]
> +                t.dep_permutations[obj] = list(itertools.permutations (deps))
> +                need_permutation_processing = True
> +
> +    def enum_permutations(t, perm_list):
> +        test_subindex = 1
> +        curr_perms = []
> +        def enum_permutations_rec(t, perm_list):
> +            nonlocal test_subindex, curr_perms
> +            if len(perm_list) >= 1:
> +                curr = perm_list[0]
> +                obj = curr[0]
> +                perms = curr[1]
> +                if not perms:
> +                    # This may be an empty list if no multiple dependencies to
> +                    # permute were found, skip to next in this case
> +                    enum_permutations_rec(t, perm_list[1:])
> +                else:
> +                    for deps in perms:
> +                        t.deps[obj] = deps
> +                        permstr = "" if obj == "#" else obj + "_"
> +                        permstr += str.join('', deps)
> +                        curr_perms.append(permstr)
> +                        enum_permutations_rec(t, perm_list[1:])
> +                        curr_perms = curr_perms[0:len(curr_perms)-1]
> +            else:
> +                # t.deps is now instantiated with one dependency order
> +                # permutation(across all objects that have multiple
> +                # permutations), now process a testcase
> +                generate_testcase(t, ("_" + str (test_subindex)
> +                                       + "-" + str.join('-', curr_perms)))
> +                test_subindex += 1
> +        enum_permutations_rec(t, perm_list)
> +
> +    # Create *.exp files with expected outputs
> +    for r in t.expected_outputs.items():
> +        sfx = ""
> +        if r[0] != "":
> +            sfx = "-" + r[0].replace("=","_")
> +        f = open(testpfx + t.test_name + sfx + ".exp", "w")
> +        (output, xfail) = r[1]
> +        f.write('%s' % output)
> +        f.close()
> +
> +    # Create header part of top-level testcase shell script, to wrap execution
> +    # and output comparison together.
> +    t.sh = open(testpfx + t.test_name + ".sh", "w")
> +    t.sh.write("#!/bin/sh\n")
> +    t.sh.write("# Test driver for %s, generated by "
> +                "dso-ordering-test.py\n" % (t.test_name))
> +    t.sh.write("common_objpfx=$1\n")
> +    t.sh.write("test_wrapper_env=$2\n")
> +    t.sh.write("run_program_env=$3\n")
> +    t.sh.write("something_failed=false\n")
> +
> +    # Starting part of Makefile fragment
> +    makefile.write("ifeq (yes,$(build-shared))\n")
> +
> +    if need_permutation_processing:
> +        enum_permutations(t, list (t.dep_permutations.items()))
> +    else:
> +        # We have no permutations to enumerate, just process testcase normally
> +        generate_testcase(t, "")
> +
> +    # If testcase is XFAIL, indicate so
> +    if t.xfail:
> +        makefile.write("test-xfail-%s = yes\n" % t.test_name)
> +
> +    # Output end part of Makefile fragment
> +    expected_output_files = ""
> +    for r in t.expected_outputs.items():
> +        sfx = ""
> +        if r[0] != "":
> +            sfx = "-" + r[0].replace("=","_")
> +        expected_output_files += " $(objpfx)%s/%s%s.exp" % (test_subdir,
> +                                                            t.test_name, sfx)
> +    makefile.write \
> +    ("$(objpfx)%s.out: $(objpfx)%s/%s.sh%s "
> +     "$(common-objpfx)support/test-run-command\n"
> +     % (t.test_name, test_subdir, t.test_name,
> +        expected_output_files))
> +    makefile.write("\t$(SHELL) $< $(common-objpfx) '$(test-wrapper-env)' "
> +                    "'$(run-program-env)' > $@; $(evaluate-test)\n")
> +    makefile.write("ifeq ($(run-built-tests),yes)\n")
> +    if t.xtest:
> +        makefile.write("xtests-special += $(objpfx)%s.out\n" % (t.test_name))
> +    else:
> +        makefile.write("tests-special += $(objpfx)%s.out\n" % (t.test_name))
> +    makefile.write("endif\n")
> +    makefile.write("endif\n")
> +
> +    # Write ending part of shell script generation
> +    t.sh.write("if $something_failed; then\n"
> +                "  exit 1\n"
> +                "else\n"
> +                "  echo '%sPASS: all tests for %s succeeded'\n"
> +                "  exit 0\n"
> +                "fi\n" % (("X" if t.xfail else ""),
> +                          t.test_name))
> +    t.sh.close()
> +

Ok.

> +# Decription file parsing
> +def parse_description_file(filename):
> +    global default_tunable_options
> +    global current_input_lineno
> +    f = open(filename)
> +    if not f:
> +        error("cannot open description file %s" % (filename))
> +    descrfile_lines = f.readlines()
> +    t = None
> +    for line in descrfile_lines:
> +        p = re.compile(r"#.*$")
> +        line = p.sub("", line) # Filter out comments
> +        line = line.strip() # Remove excess whitespace
> +        current_input_lineno += 1
> +
> +        m = re.match(r"^tunable_option:\s*(.*)$", line)
> +        if m:
> +            if m.group(1) == "":
> +                error("tunable option cannot be empty")
> +            default_tunable_options.append(m.group (1))
> +            continue
> +
> +        m = re.match(r"^clear_tunables$", line)
> +        if m:
> +            default_tunable_options = []
> +            continue
> +
> +        m = re.match(r"^([^:]+):\s*(.*)$", line)
> +        if m:
> +            lhs = m.group(1)
> +            o = re.match(r"^output(.*)$", lhs)
> +            xfail = False
> +            if not o:
> +                o = re.match(r"^xfail_output(.*)$", lhs)
> +                if o:
> +                    xfail = True;
> +            if o:
> +                if not t:
> +                    error("output specification without testcase description")
> +                tsstr = ""
> +                if o.group(1):
> +                    ts = re.match(r"^\(([a-zA-Z0-9_.=]*)\)$", o.group (1))
> +                    if not ts:
> +                        error("tunable option malformed '%s'" % o.group(1))
> +                    tsstr = ts.group(1)
> +                t.expected_outputs[tsstr] = (m.group(2), xfail)
> +                # Any tunable option XFAILed means entire testcase
> +                # is XFAIL/XPASS
> +                t.xfail |= xfail
> +            else:
> +                if t:
> +                    # Starting a new test description, end and process
> +                    # current one.
> +                    process_testcase(t)
> +                t = TestDescr()
> +                x = re.match(r"^xtest\((.*)\)$", lhs)
> +                if x:
> +                    t.xtest = True
> +                    t.test_name = x.group(1)
> +                else:
> +                    t.test_name = lhs
> +                descr_string = m.group(2)
> +                parse_description_string(t, descr_string)
> +            continue
> +        else:
> +            if line:
> +                if not t:
> +                    error("no active testcase description")
> +                parse_description_string(t, line)
> +    # Process last completed test description
> +    if t:
> +        process_testcase(t)
> +
> +# Setup Makefile output to file or stdout as selected
> +if output_makefile:
> +    output_makefile_dir = os.path.dirname(output_makefile)
> +    if output_makefile_dir:
> +        os.makedirs(output_makefile_dir, exist_ok = True)
> +    makefile = open(output_makefile, "w")
> +else:
> +    makefile = open(sys.stdout.fileno (), "w")
> +
> +# Finally, the main top-level calling of above parsing routines.
> +if description_file:
> +    parse_description_file(description_file)
> +else:
> +    t = TestDescr()
> +    t.test_name = test_name
> +    parse_description_string(t, description)
> +    process_testcase(t)
> +
> +# Close Makefile fragment output
> +makefile.close()

Ok

> diff --git a/support/Depend b/support/Depend
> new file mode 100644
> index 0000000000..7e7d5dc67c
> --- /dev/null
> +++ b/support/Depend
> @@ -0,0 +1 @@
> +elf

Ok.

> diff --git a/support/Makefile b/support/Makefile
> index a462781718..0da604ade8 100644
> --- a/support/Makefile
> +++ b/support/Makefile
> @@ -252,10 +252,16 @@ others-noinstall += shell-container echo-container true-container
>  others += $(LINKS_DSO_PROGRAM)
>  others-noinstall += $(LINKS_DSO_PROGRAM)
>  
> +others += test-run-command
> +others-static += test-run-command
> +others-noinstall += test-run-command
> +LDLIBS-test-run-command = $(libsupport)
> +
>  $(objpfx)test-container : $(libsupport)
>  $(objpfx)shell-container : $(libsupport)
>  $(objpfx)echo-container : $(libsupport)
>  $(objpfx)true-container : $(libsupport)
> +$(objpfx)test-run-command : $(libsupport) $(common-objpfx)elf/static-stubs.o
>  
>  tests = \
>    README-testing \

Ok.

> diff --git a/support/support_test_main.c b/support/support_test_main.c
> index 07e3cdd173..66a754b84f 100644
> --- a/support/support_test_main.c
> +++ b/support/support_test_main.c
> @@ -228,6 +228,18 @@ run_test_function (int argc, char **argv, const struct test_config *config)
>    while (wait_for_debugger)
>      usleep (1000);
>  
> +  if (config->run_command_mode)
> +    {
> +      /* In run-command-mode, the child process executes the command line
> +	 arguments as a new program.  */
> +      char **argv_ = xmalloc (sizeof (char *) * argc);
> +      memcpy (argv_, &argv[1], sizeof (char *) * (argc - 1));
> +      argv_[argc - 1] = NULL;
> +      execv (argv_[0], argv_);
> +      printf ("error: should not return here\n");
> +      exit (1);
> +    }
> +
>    if (config->test_function != NULL)
>      return config->test_function ();
>    else if (config->test_function_argv != NULL)

Ok.

> diff --git a/support/test-driver.c b/support/test-driver.c
> index b0bea46dee..1552f62c9b 100644
> --- a/support/test-driver.c
> +++ b/support/test-driver.c
> @@ -116,7 +116,9 @@ main (int argc, char **argv)
>  #if defined (TEST_FUNCTION) && defined (TEST_FUNCTON_ARGV)
>  # error TEST_FUNCTION and TEST_FUNCTION_ARGV cannot be defined at the same time
>  #endif
> -#if defined (TEST_FUNCTION)
> +#ifdef RUN_COMMAND_MODE
> +  test_config.run_command_mode = 1;
> +#elif defined (TEST_FUNCTION)
>    test_config.test_function = TEST_FUNCTION;
>  #elif defined (TEST_FUNCTION_ARGV)
>    test_config.test_function_argv = TEST_FUNCTION_ARGV;

Ok.

> diff --git a/support/test-driver.h b/support/test-driver.h
> index 8d4f38275d..b44c0ff033 100644
> --- a/support/test-driver.h
> +++ b/support/test-driver.h
> @@ -36,6 +36,7 @@ struct test_config
>    int expected_signal;   /* If non-zero, expect termination by signal.  */
>    char no_mallopt;       /* Boolean flag to disable mallopt.  */
>    char no_setvbuf;       /* Boolean flag to disable setvbuf.  */
> +  char run_command_mode; /* Boolean flag to indicate run-command-mode.  */
>    const char *optstring; /* Short command line options.  */
>  };
>  

Ok.

> diff --git a/support/test-run-command.c b/support/test-run-command.c
> new file mode 100644
> index 0000000000..61560d7bfb
> --- /dev/null
> +++ b/support/test-run-command.c
> @@ -0,0 +1,22 @@
> +/* Main program for test-run-command support utility.
> +   Copyright (C) 2021 Free Software Foundation, Inc.
> +   This file is part of the GNU C Library.
> +
> +   The GNU C Library is free software; you can redistribute it and/or
> +   modify it under the terms of the GNU Lesser General Public
> +   License as published by the Free Software Foundation; either
> +   version 2.1 of the License, or (at your option) any later version.
> +
> +   The GNU C Library is distributed in the hope that it will be useful,
> +   but WITHOUT ANY WARRANTY; without even the implied warranty of
> +   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> +   Lesser General Public License for more details.
> +
> +   You should have received a copy of the GNU Lesser General Public
> +   License along with the GNU C Library; if not, see
> +   <https://www.gnu.org/licenses/>.  */
> +
> +/* This is basically a configuration of test-driver.c into a general
> +   command-line program runner.  */
> +#define RUN_COMMAND_MODE
> +#include <test-driver.c>

Ok.
Chung-Lin Tang Oct. 5, 2021, 2:27 p.m. UTC | #2
Hi Adhemerval, thanks for the review.
And thanks for all the style and proofreading adjustments.

On 2021/8/11 2:05 AM, Adhemerval Zanella wrote:
>> # Complex example from Bugzilla #15311, under-linked and with circular
>> +# relocation(dynamic) dependencies. While this is technically unspecified, the
>> +# presumed reasonable practical behavior is for the destructor order to respect
>> +# the static DT_NEEDED links (here this means the a->b->c->d order).
>> +# The older dynamic_sort=1 algorithm does not achieve this, while the DFS-based
>> +# dynamic_sort=2 algorithm does, although it is still arguable whether going
>> +# beyond spec to do this is the right thing to do.
>> +# The below expected outputs are what the two algorithms currently produce
>> +# respectively, for regression testing purposes.
>> +tst-bz15311: {+a;+e;+f;+g;+d;%d;-d;-g;-f;-e;-a};a->b->c->d;d=>[ba];c=>a;b=>e=>a;c=>f=>b;d=>g=>c
>> +output(glibc.rtld.dynamic_sort=1): {+a[d>c>b>a>];+e[e>];+f[f>];+g[g>];+d[];%d(b(e(a()))a()g(c(a()f(b(e(a()))))));-d[];-g[];-f[];-e[];-a[<a<c<d<g<f<b<e];}
>> +output(glibc.rtld.dynamic_sort=2): {+a[d>c>b>a>];+e[e>];+f[f>];+g[g>];+d[];%d(b(e(a()))a()g(c(a()f(b(e(a()))))));-d[];-g[];-f[];-e[];-a[<g<f<a<b<c<d<e];}
> This triggers a regression without the actual fix in the subsequent patch.
> The test needs to either be marked as xfail_output (and adjusted in the
> patch that actually fixes it) or move to the subsequent patch.

I'll adjust this in a next revision that combines everything so far.

Thanks,
Chung-Lin
diff mbox series

Patch

diff --git a/elf/Makefile b/elf/Makefile
index 4fe60947ad..fe7a8b418f 100644
--- a/elf/Makefile
+++ b/elf/Makefile
@@ -469,6 +469,21 @@  tests-special += $(objpfx)order-cmp.out $(objpfx)tst-array1-cmp.out \
 		 $(objpfx)tst-unused-dep-cmp.out
 endif
 
+# DSO sorting tests:
+# The dso-ordering-test.py script generates testcase source files in $(objpfx),
+# creating a $(objpfx)<testcase-name>-dir for each testcase, and creates a
+# Makefile fragment to be included.
+define include_dsosort_tests
+$(objpfx)$(1).generated-makefile: $(1)
+	$(PYTHON) $(..)scripts/dso-ordering-test.py \
+	--description-file $$< --objpfx $(objpfx) --output-makefile $$@
+include $(objpfx)$(1).generated-makefile
+endef
+
+# Generate from each testcase description file
+$(eval $(call include_dsosort_tests,dso-sort-tests-1.def))
+$(eval $(call include_dsosort_tests,dso-sort-tests-2.def))
+
 check-abi: $(objpfx)check-abi-ld.out
 tests-special += $(objpfx)check-abi-ld.out
 update-abi: update-abi-ld
diff --git a/elf/dso-sort-tests-1.def b/elf/dso-sort-tests-1.def
new file mode 100644
index 0000000000..51f1d2e158
--- /dev/null
+++ b/elf/dso-sort-tests-1.def
@@ -0,0 +1,66 @@ 
+# DSO sorting test descriptions.
+# This file is to be processed by ../scripts/dso-ordering-test.py, see usage
+# in elf/Makefile for how it is executed.
+
+# We test both dynamic loader sorting algorithms
+tunable_option: glibc.rtld.dynamic_sort=1
+tunable_option: glibc.rtld.dynamic_sort=2
+
+# Sequence of single dependencies with no cycles.
+tst-dso-ordering1: a->b->c
+output: c>b>a>{}<a<b<c
+
+# Sequence including 2 dependent DSOs not at the end of the graph.
+tst-dso-ordering2: a->b->[cd]->e
+output: e>d>c>b>a>{}<a<b<c<d<e
+
+# Complex order with 3 "layers" of full dependencies
+tst-dso-ordering3: a->[bc]->[def]->[gh]->i
+output: i>h>g>f>e>d>c>b>a>{}<a<b<c<d<e<f<g<h<i
+
+# Sequence including 2 dependent DSOs at the end of the graph.
+# Additionally the same dependencies appear in two paths.
+tst-dso-ordering4: a->b->[de];a->c->d->e
+output: e>d>c>b>a>{}<a<b<c<d<e
+
+# Test that b->c cross link is respected correctly
+tst-dso-ordering5: a!->[bc]->d;b->c
+output: d>c>b>a>{}<a<b<c<d
+
+# First DSO fully dependent on 4 DSOs, with another DSO at the end of chain.
+tst-dso-ordering6: a->[bcde]->f
+output: f>e>d>c>b>a>{}<a<b<c<d<e<f
+
+# Sequence including 2 dependent and 3 dependent DSOs, and one of the
+# dependent DSOs is dependent on an earlier DSO.
+tst-dso-ordering7: a->[bc];b->[cde];e->f
+output: f>e>d>c>b>a>{}<a<b<c<d<e<f
+
+# Sequence where the DSO c is unerlinked and calls a function in DSO a which
+# is technically a cycle. The main executable depends on the first two DSOs.
+# Note: This test has unspecified behavior.
+tst-dso-ordering8: a->b->c=>a;{}->[ba]
+output: c>b>a>{}<a<b<c
+
+# Generate the permutation of DT_NEEDED order between the main binary and
+# all 5 DSOs; all link orders should produce exact same init/fini ordering
+tst-dso-ordering9: a->b->c->d->e;{}!->[abcde]
+output: e>d>c>b>a>{}<a<b<c<d<e
+
+# Test if init/fini ordering behavior is proper, despite main program with
+# an soname that may cause confusion
+tst-dso-ordering10: {}->a->b->c;soname({})=c
+output: b>a>{}<a<b
+
+# Complex example from Bugzilla #15311, under-linked and with circular
+# relocation(dynamic) dependencies. While this is technically unspecified, the
+# presumed reasonable practical behavior is for the destructor order to respect
+# the static DT_NEEDED links (here this means the a->b->c->d order).
+# The older dynamic_sort=1 algorithm does not achieve this, while the DFS-based
+# dynamic_sort=2 algorithm does, although it is still arguable whether going
+# beyond spec to do this is the right thing to do.
+# The below expected outputs are what the two algorithms currently produce
+# respectively, for regression testing purposes.
+tst-bz15311: {+a;+e;+f;+g;+d;%d;-d;-g;-f;-e;-a};a->b->c->d;d=>[ba];c=>a;b=>e=>a;c=>f=>b;d=>g=>c
+output(glibc.rtld.dynamic_sort=1): {+a[d>c>b>a>];+e[e>];+f[f>];+g[g>];+d[];%d(b(e(a()))a()g(c(a()f(b(e(a()))))));-d[];-g[];-f[];-e[];-a[<a<c<d<g<f<b<e];}
+output(glibc.rtld.dynamic_sort=2): {+a[d>c>b>a>];+e[e>];+f[f>];+g[g>];+d[];%d(b(e(a()))a()g(c(a()f(b(e(a()))))));-d[];-g[];-f[];-e[];-a[<g<f<a<b<c<d<e];}
diff --git a/elf/dso-sort-tests-2.def b/elf/dso-sort-tests-2.def
new file mode 100644
index 0000000000..865f57be04
--- /dev/null
+++ b/elf/dso-sort-tests-2.def
@@ -0,0 +1,614 @@ 
+# Large DSO sorting testcase adapted from Red Hat Bugzilla 1162810
+#
+# Note that below we specify different expected outputs between dynamic_sort=1
+# and dynamic_sort=2 algorithms, due to circular dependencies in the testcase
+# causing different sorting behavior. These expected outputs are what the two
+# algorithms currently produce, and are used for regression comparison tests.
+# They are not "definitively" correct outputs, for circular dependencies
+# inherently have unspecified behavior.
+
+xtest(tst-redhat-1162810):
+{}->A101
+{}->*
+A101->(B101 B163 B122 B181)
+A102->(B102 B140 B199 B158)
+A103->(B103 B117 B176 B135)
+A104->(B104 B194 B153 B112)
+A105->(B105 B171 B130 B189)
+A106->(B106 B148 B107 B166)
+A107->(B107 B125 B184 B143)
+A108->(B108 B102 B161 B120)
+A109->(B109 B179 B138 B197)
+A110->(B110 B156 B115 B174)
+A111->(B111 B133 B192 B151)
+A112->(B112 B110 B169 B128)
+A113->(B113 B187 B146 B105)
+A114->(B114 B164 B123 B182)
+A115->(B115 B141 B200 B159)
+A116->(B116 B118 B177 B136)
+A117->(B117 B195 B154 B113)
+A118->(B118 B172 B131 B190)
+A119->(B119 B149 B108 B167)
+A120->(B120 B126 B185 B144)
+A121->(B121 B103 B162)
+A122->(B122 B180 B139 B198)
+A123->(B123 B157 B116 B175)
+A124->(B124 B134 B193 B152)
+A125->(B125 B111 B170 B129)
+A126->(B126 B188 B147 B106)
+A127->(B127 B165 B124 B183)
+A128->(B128 B142 B101 B160)
+A129->(B129 B119 B178 B137)
+A130->(B130 B196 B155 B114)
+A131->(B131 B173 B132 B191)
+A132->(B132 B150 B109 B168)
+A133->(B133 B127 B186 B145)
+A134->(B134 B104 B163 B122)
+A135->(B135 B181 B140 B199)
+A136->(B136 B158 B117 B176)
+A137->(B137 B135 B194 B153)
+A138->(B138 B112 B171 B130)
+A139->(B139 B189 B148 B107)
+A140->(B140 B166 B125 B184)
+A141->(B141 B143 B102 B161)
+A142->(B142 B120 B179 B138)
+A143->(B143 B197 B156 B115)
+A144->(B144 B174 B133 B192)
+A145->(B145 B151 B110 B169)
+A146->(B146 B128 B187)
+A147->(B147 B105 B164 B123)
+A148->(B148 B182 B141 B200)
+A149->(B149 B159 B118 B177)
+A150->(B150 B136 B195 B154)
+A151->(B151 B113 B172 B131)
+A152->(B152 B190 B149 B108)
+A153->(B153 B167 B126 B185)
+A154->(B154 B144 B103 B162)
+A155->(B155 B121 B180 B139)
+A156->(B156 B198 B157 B116)
+A157->(B157 B175 B134 B193)
+A158->(B158 B152 B111 B170)
+A159->(B159 B129 B188 B147)
+A160->(B160 B106 B165 B124)
+A161->(B161 B183 B142 B101)
+A162->(B162 B160 B119 B178)
+A163->(B163 B137 B196 B155)
+A164->(B164 B114 B173 B132)
+A165->(B165 B191 B150 B109)
+A166->(B166 B168 B127 B186)
+A167->(B167 B145 B104 B163)
+A168->(B168 B122 B181 B140)
+A169->(B169 B199 B158 B117)
+A170->(B170 B176 B135 B194)
+A171->(B171 B153 B112)
+A172->(B172 B130 B189 B148)
+A173->(B173 B107 B166 B125)
+A174->(B174 B184 B143 B102)
+A175->(B175 B161 B120 B179)
+A176->(B176 B138 B197 B156)
+A177->(B177 B115 B174 B133)
+A178->(B178 B192 B151 B110)
+A179->(B179 B169 B128 B187)
+A180->(B180 B146 B105 B164)
+A181->(B181 B123 B182 B141)
+A182->(B182 B200 B159 B118)
+A183->(B183 B177 B136 B195)
+A184->(B184 B154 B113 B172)
+A185->(B185 B131 B190 B149)
+A186->(B186 B108 B167 B126)
+A187->(B187 B185 B144 B103)
+A188->(B188 B162 B121 B180)
+A189->(B189 B139 B198 B157)
+A190->(B190 B116 B175 B134)
+A191->(B191 B193 B152 B111)
+A192->(B192 B170 B129 B188)
+A193->(B193 B147 B106 B165)
+A194->(B194 B124 B183 B142)
+A195->(B195 B101 B160 B119)
+A196->(B196 B178 B137)
+A197->(B197 B155 B114 B173)
+A198->(B198 B132 B191 B150)
+A199->(B199 B109 B168 B127)
+A200->(B200 B186 B145 B104)
+B101->(C101 C164 C123 C182)
+B102->(C102 C141 C200 C159)
+B103->(C103 C118 C177 C136)
+B104->(C104 C195 C154 C113)
+B105->(C105 C172 C131 C190)
+B106->(C106 C149 C108 C167)
+B107->(C107 C126 C185 C144)
+B108->(C108 C103 C162 C121)
+B109->(C109 C180 C139 C198)
+B110->(C110 C157 C116 C175)
+B111->(C111 C134 C193 C152)
+B112->(C112 C111 C170 C129)
+B113->(C113 C188 C147 C106)
+B114->(C114 C165 C124 C183)
+B115->(C115 C142 C101 C160)
+B116->(C116 C119 C178 C137)
+B117->(C117 C196 C155 C114)
+B118->(C118 C173 C132 C191)
+B119->(C119 C150 C109 C168)
+B120->(C120 C127 C186 C145)
+B121->(C121 C104 C163 C122)
+B122->(C122 C181 C140 C199)
+B123->(C123 C158 C117 C176)
+B124->(C124 C135 C194 C153)
+B125->(C125 C112 C171 C130)
+B126->(C126 C189 C148 C107)
+B127->(C127 C166 C125 C184)
+B128->(C128 C143 C102 C161)
+B129->(C129 C120 C179 C138)
+B130->(C130 C197 C156 C115)
+B131->(C131 C174 C133 C192)
+B132->(C132 C151 C110 C169)
+B133->(C133 C128 C187 C146)
+B134->(C134 C105 C164 C123)
+B135->(C135 C182 C141 C200)
+B136->(C136 C159 C118 C177)
+B137->(C137 C136 C195 C154)
+B138->(C138 C113 C172 C131)
+B139->(C139 C190 C149 C108)
+B140->(C140 C167 C126 C185)
+B141->(C141 C144 C103 C162)
+B142->(C142 C121 C180 C139)
+B143->(C143 C198 C157 C116)
+B144->(C144 C175 C134 C193)
+B145->(C145 C152 C111 C170)
+B146->(C146 C129 C188 C147)
+B147->(C147 C106 C165 C124)
+B148->(C148 C183 C142 C101)
+B149->(C149 C160 C119 C178)
+B150->(C150 C137 C196 C155)
+B151->(C151 C114 C173 C132)
+B152->(C152 C191 C150 C109)
+B153->(C153 C168 C127 C186)
+B154->(C154 C145 C104 C163)
+B155->(C155 C122 C181 C140)
+B156->(C156 C199 C158 C117)
+B157->(C157 C176 C135 C194)
+B158->(C158 C153 C112 C171)
+B159->(C159 C130 C189 C148)
+B160->(C160 C107 C166 C125)
+B161->(C161 C184 C143 C102)
+B162->(C162 C161 C120 C179)
+B163->(C163 C138 C197 C156)
+B164->(C164 C115 C174 C133)
+B165->(C165 C192 C151 C110)
+B166->(C166 C169 C128 C187)
+B167->(C167 C146 C105 C164)
+B168->(C168 C123 C182 C141)
+B169->(C169 C200 C159 C118)
+B170->(C170 C177 C136 C195)
+B171->(C171 C154 C113 C172)
+B172->(C172 C131 C190 C149)
+B173->(C173 C108 C167 C126)
+B174->(C174 C185 C144 C103)
+B175->(C175 C162 C121 C180)
+B176->(C176 C139 C198 C157)
+B177->(C177 C116 C175 C134)
+B178->(C178 C193 C152 C111)
+B179->(C179 C170 C129 C188)
+B180->(C180 C147 C106 C165)
+B181->(C181 C124 C183 C142)
+B182->(C182 C101 C160 C119)
+B183->(C183 C178 C137 C196)
+B184->(C184 C155 C114 C173)
+B185->(C185 C132 C191 C150)
+B186->(C186 C109 C168 C127)
+B187->(C187 C186 C145 C104)
+B188->(C188 C163 C122 C181)
+B189->(C189 C140 C199 C158)
+B190->(C190 C117 C176 C135)
+B191->(C191 C194 C153 C112)
+B192->(C192 C171 C130 C189)
+B193->(C193 C148 C107 C166)
+B194->(C194 C125 C184 C143)
+B195->(C195 C102 C161 C120)
+B196->(C196 C179 C138 C197)
+B197->(C197 C156 C115 C174)
+B198->(C198 C133 C192 C151)
+B199->(C199 C110 C169 C128)
+B200->(C200 C187 C146 C105)
+C101->(A165 A124)
+C102->(A183 A142)
+C103->(A101 A160)
+C104->(A119 A178)
+C105->(A137 A196)
+C106->(A155 A114)
+C107->(A173 A132)
+C108->(A191 A150)
+C109->(A109 A168)
+C110->(A127 A186)
+C111->(A145 A104)
+C112->(A163 A122)
+C113->(A181 A140)
+C114->(A199 A158)
+C115->(A117 A176)
+C116->(A135 A194)
+C117->(A153 A112)
+C118->(A171 A130)
+C119->(A189 A148)
+C120->(A107 A166)
+C121->(A125 A184)
+C122->(A143 A102)
+C123->(A161 A120)
+C124->(A179 A138)
+C125->(A197 A156)
+C126->(A115 A174)
+C127->(A133 A192)
+C128->(A151 A110)
+C129->(A169 A128)
+C130->(A187 A146)
+C131->(A105 A164)
+C132->(A123 A182)
+C133->(A141 A200)
+C134->(A159 A118)
+C135->(A177 A136)
+C136->(A195 A154)
+C137->(A113 A172)
+C138->(A131 A190)
+C139->(A149 A108)
+C140->(A167 A126)
+C141->(A185 A144)
+C142->(A103 A162)
+C143->(A121 A180)
+C144->(A139 A198)
+C145->(A157 A116)
+C146->(A175 A134)
+C147->(A193 A152)
+C148->(A111 A170)
+C149->(A129 A188)
+C150->(A147 A106)
+C151->(A165 A124)
+C152->(A183 A142)
+C153->(A101 A160)
+C154->(A119 A178)
+C155->(A137 A196)
+C156->(A155 A114)
+C157->(A173 A132)
+C158->(A191 A150)
+C159->(A109 A168)
+C160->(A127 A186)
+C161->(A145 A104)
+C162->(A163 A122)
+C163->(A181 A140)
+C164->(A199 A158)
+C165->(A117 A176)
+C166->(A135 A194)
+C167->(A153 A112)
+C168->(A171 A130)
+C169->(A189 A148)
+C170->(A107 A166)
+C171->(A125 A184)
+C172->(A143 A102)
+C173->(A161 A120)
+C174->(A179 A138)
+C175->(A197 A156)
+C176->(A115 A174)
+C177->(A133 A192)
+C178->(A151 A110)
+C179->(A169 A128)
+C180->(A187 A146)
+C181->(A105 A164)
+C182->(A123 A182)
+C183->(A141 A200)
+C184->(A159 A118)
+C185->(A177 A136)
+C186->(A195 A154)
+C187->(A113 A172)
+C188->(A131 A190)
+C189->(A149 A108)
+C190->(A167 A126)
+C191->(A185 A144)
+C192->(A103 A162)
+C193->(A121 A180)
+C194->(A139 A198)
+C195->(A157 A116)
+C196->(A175 A134)
+C197->(A193 A152)
+C198->(A111 A170)
+C199->(A129 A188)
+C200->(A147 A106)
+M11X11->(M13X14 M12X13 M12X12 M12X11)
+M11X12->(M13X25 M12X24 M12X23 M12X22)
+M11X13->(M13X21 M12X20 M12X19 M12X18)
+M11X14->(M13X17 M12X16 M12X15 M12X14)
+M11X15->(M13X13 M12X12 M12X11 M12X25)
+M11X16->(M13X24 M12X23 M12X22 M12X21)
+M11X17->(M13X20 M12X19 M12X18 M12X17)
+M11X18->(M13X16 M12X15 M12X14 M12X13)
+M11X19->(M13X12 M12X11 M12X25 M12X24)
+M11X20->(M13X23 M12X22 M12X21 M12X20)
+M11X21->(M13X19 M12X18 M12X17 M12X16)
+M11X22->(M13X15 M12X14 M12X13 M12X12)
+M11X23->(M13X11 M12X25 M12X24 M12X23)
+M11X24->(M13X22 M12X21 M12X20 M12X19)
+M11X25->(M13X18 M12X17 M12X16 M12X15)
+M12X11->(M14X14 M13X13 M13X12 M13X11)
+M12X12->(M14X25 M13X24 M13X23 M13X22)
+M12X13->(M14X21 M13X20 M13X19 M13X18)
+M12X14->(M14X17 M13X16 M13X15 M13X14)
+M12X15->(M14X13 M13X12 M13X11 M13X25)
+M12X16->(M14X24 M13X23 M13X22 M13X21)
+M12X17->(M14X20 M13X19 M13X18 M13X17)
+M12X18->(M14X16 M13X15 M13X14 M13X13)
+M12X19->(M14X12 M13X11 M13X25 M13X24)
+M12X20->(M14X23 M13X22 M13X21 M13X20)
+M12X21->(M14X19 M13X18 M13X17 M13X16)
+M12X22->(M14X15 M13X14 M13X13 M13X12)
+M12X23->(M14X11 M13X25 M13X24 M13X23)
+M12X24->(M14X22 M13X21 M13X20 M13X19)
+M12X25->(M14X18 M13X17 M13X16 M13X15)
+M13X11->(M15X14 M14X13 M14X12 M14X11)
+M13X12->(M15X25 M14X24 M14X23 M14X22)
+M13X13->(M15X21 M14X20 M14X19 M14X18)
+M13X14->(M15X17 M14X16 M14X15 M14X14)
+M13X15->(M15X13 M14X12 M14X11 M14X25)
+M13X16->(M15X24 M14X23 M14X22 M14X21)
+M13X17->(M15X20 M14X19 M14X18 M14X17)
+M13X18->(M15X16 M14X15 M14X14 M14X13)
+M13X19->(M15X12 M14X11 M14X25 M14X24)
+M13X20->(M15X23 M14X22 M14X21 M14X20)
+M13X21->(M15X19 M14X18 M14X17 M14X16)
+M13X22->(M15X15 M14X14 M14X13 M14X12)
+M13X23->(M15X11 M14X25 M14X24 M14X23)
+M13X24->(M15X22 M14X21 M14X20 M14X19)
+M13X25->(M15X18 M14X17 M14X16 M14X15)
+M14X11->(M16X14 M15X13 M15X12 M15X11)
+M14X12->(M16X25 M15X24 M15X23 M15X22)
+M14X13->(M16X21 M15X20 M15X19 M15X18)
+M14X14->(M16X17 M15X16 M15X15 M15X14)
+M14X15->(M16X13 M15X12 M15X11 M15X25)
+M14X16->(M16X24 M15X23 M15X22 M15X21)
+M14X17->(M16X20 M15X19 M15X18 M15X17)
+M14X18->(M16X16 M15X15 M15X14 M15X13)
+M14X19->(M16X12 M15X11 M15X25 M15X24)
+M14X20->(M16X23 M15X22 M15X21 M15X20)
+M14X21->(M16X19 M15X18 M15X17 M15X16)
+M14X22->(M16X15 M15X14 M15X13 M15X12)
+M14X23->(M16X11 M15X25 M15X24 M15X23)
+M14X24->(M16X22 M15X21 M15X20 M15X19)
+M14X25->(M16X18 M15X17 M15X16 M15X15)
+M15X11->(M17X14 M16X13 M16X12 M16X11)
+M15X12->(M17X25 M16X24 M16X23 M16X22)
+M15X13->(M17X21 M16X20 M16X19 M16X18)
+M15X14->(M17X17 M16X16 M16X15 M16X14)
+M15X15->(M17X13 M16X12 M16X11 M16X25)
+M15X16->(M17X24 M16X23 M16X22 M16X21)
+M15X17->(M17X20 M16X19 M16X18 M16X17)
+M15X18->(M17X16 M16X15 M16X14 M16X13)
+M15X19->(M17X12 M16X11 M16X25 M16X24)
+M15X20->(M17X23 M16X22 M16X21 M16X20)
+M15X21->(M17X19 M16X18 M16X17 M16X16)
+M15X22->(M17X15 M16X14 M16X13 M16X12)
+M15X23->(M17X11 M16X25 M16X24 M16X23)
+M15X24->(M17X22 M16X21 M16X20 M16X19)
+M15X25->(M17X18 M16X17 M16X16 M16X15)
+M16X11->(M18X14 M17X13 M17X12 M17X11)
+M16X12->(M18X25 M17X24 M17X23 M17X22)
+M16X13->(M18X21 M17X20 M17X19 M17X18)
+M16X14->(M18X17 M17X16 M17X15 M17X14)
+M16X15->(M18X13 M17X12 M17X11 M17X25)
+M16X16->(M18X24 M17X23 M17X22 M17X21)
+M16X17->(M18X20 M17X19 M17X18 M17X17)
+M16X18->(M18X16 M17X15 M17X14 M17X13)
+M16X19->(M18X12 M17X11 M17X25 M17X24)
+M16X20->(M18X23 M17X22 M17X21 M17X20)
+M16X21->(M18X19 M17X18 M17X17 M17X16)
+M16X22->(M18X15 M17X14 M17X13 M17X12)
+M16X23->(M18X11 M17X25 M17X24 M17X23)
+M16X24->(M18X22 M17X21 M17X20 M17X19)
+M16X25->(M18X18 M17X17 M17X16 M17X15)
+M17X11->(M19X14 M18X13 M18X12 M18X11)
+M17X12->(M19X25 M18X24 M18X23 M18X22)
+M17X13->(M19X21 M18X20 M18X19 M18X18)
+M17X14->(M19X17 M18X16 M18X15 M18X14)
+M17X15->(M19X13 M18X12 M18X11 M18X25)
+M17X16->(M19X24 M18X23 M18X22 M18X21)
+M17X17->(M19X20 M18X19 M18X18 M18X17)
+M17X18->(M19X16 M18X15 M18X14 M18X13)
+M17X19->(M19X12 M18X11 M18X25 M18X24)
+M17X20->(M19X23 M18X22 M18X21 M18X20)
+M17X21->(M19X19 M18X18 M18X17 M18X16)
+M17X22->(M19X15 M18X14 M18X13 M18X12)
+M17X23->(M19X11 M18X25 M18X24 M18X23)
+M17X24->(M19X22 M18X21 M18X20 M18X19)
+M17X25->(M19X18 M18X17 M18X16 M18X15)
+M18X11->(M20X14 M19X13 M19X12 M19X11)
+M18X12->(M20X25 M19X24 M19X23 M19X22)
+M18X13->(M20X21 M19X20 M19X19 M19X18)
+M18X14->(M20X17 M19X16 M19X15 M19X14)
+M18X15->(M20X13 M19X12 M19X11 M19X25)
+M18X16->(M20X24 M19X23 M19X22 M19X21)
+M18X17->(M20X20 M19X19 M19X18 M19X17)
+M18X18->(M20X16 M19X15 M19X14 M19X13)
+M18X19->(M20X12 M19X11 M19X25 M19X24)
+M18X20->(M20X23 M19X22 M19X21 M19X20)
+M18X21->(M20X19 M19X18 M19X17 M19X16)
+M18X22->(M20X15 M19X14 M19X13 M19X12)
+M18X23->(M20X11 M19X25 M19X24 M19X23)
+M18X24->(M20X22 M19X21 M19X20 M19X19)
+M18X25->(M20X18 M19X17 M19X16 M19X15)
+M19X11->(M21X14 M20X13 M20X12 M20X11)
+M19X12->(M21X25 M20X24 M20X23 M20X22)
+M19X13->(M21X21 M20X20 M20X19 M20X18)
+M19X14->(M21X17 M20X16 M20X15 M20X14)
+M19X15->(M21X13 M20X12 M20X11 M20X25)
+M19X16->(M21X24 M20X23 M20X22 M20X21)
+M19X17->(M21X20 M20X19 M20X18 M20X17)
+M19X18->(M21X16 M20X15 M20X14 M20X13)
+M19X19->(M21X12 M20X11 M20X25 M20X24)
+M19X20->(M21X23 M20X22 M20X21 M20X20)
+M19X21->(M21X19 M20X18 M20X17 M20X16)
+M19X22->(M21X15 M20X14 M20X13 M20X12)
+M19X23->(M21X11 M20X25 M20X24 M20X23)
+M19X24->(M21X22 M20X21 M20X20 M20X19)
+M19X25->(M21X18 M20X17 M20X16 M20X15)
+M20X11->(M22X14 M21X13 M21X12 M21X11)
+M20X12->(M22X25 M21X24 M21X23 M21X22)
+M20X13->(M22X21 M21X20 M21X19 M21X18)
+M20X14->(M22X17 M21X16 M21X15 M21X14)
+M20X15->(M22X13 M21X12 M21X11 M21X25)
+M20X16->(M22X24 M21X23 M21X22 M21X21)
+M20X17->(M22X20 M21X19 M21X18 M21X17)
+M20X18->(M22X16 M21X15 M21X14 M21X13)
+M20X19->(M22X12 M21X11 M21X25 M21X24)
+M20X20->(M22X23 M21X22 M21X21 M21X20)
+M20X21->(M22X19 M21X18 M21X17 M21X16)
+M20X22->(M22X15 M21X14 M21X13 M21X12)
+M20X23->(M22X11 M21X25 M21X24 M21X23)
+M20X24->(M22X22 M21X21 M21X20 M21X19)
+M20X25->(M22X18 M21X17 M21X16 M21X15)
+M21X11->(M23X15 M22X14 M22X13 M22X12)
+M21X12->(M11X11 M23X25 M22X24 M22X23 M22X22)
+M21X13->(M23X21 M22X20 M22X19 M22X18)
+M21X14->(M23X17 M22X16 M22X15 M22X14)
+M21X15->(M23X13 M22X12 M22X11 M22X25)
+M21X16->(M23X24 M22X23 M22X22 M22X21)
+M21X17->(M23X20 M22X19 M22X18 M22X17)
+M21X18->(M23X16 M22X15 M22X14 M22X13)
+M21X19->(M23X12 M22X11 M22X25 M22X24)
+M21X20->(M23X23 M22X22 M22X21 M22X20)
+M21X21->(M23X19 M22X18 M22X17 M22X16)
+M21X22->(M23X15 M22X14 M22X13 M22X12)
+M21X23->(M23X11 M22X25 M22X24 M22X23)
+M21X24->(M23X22 M22X21 M22X20 M22X19)
+M21X25->(M23X18 M22X17 M22X16 M22X15)
+M22X11->(M24X16 M23X15 M23X14 M23X13)
+M22X12->(M12X12 M24X11 M23X25 M23X24 M23X23)
+M22X13->(M24X22 M23X21 M23X20 M23X19)
+M22X14->(M24X18 M23X17 M23X16 M23X15)
+M22X15->(M24X14 M23X13 M23X12 M23X11)
+M22X16->(M24X25 M23X24 M23X23 M23X22)
+M22X17->(M24X21 M23X20 M23X19 M23X18)
+M22X18->(M24X17 M23X16 M23X15 M23X14)
+M22X19->(M24X13 M23X12 M23X11 M23X25)
+M22X20->(M24X24 M23X23 M23X22 M23X21)
+M22X21->(M24X20 M23X19 M23X18 M23X17)
+M22X22->(M24X16 M23X15 M23X14 M23X13)
+M22X23->(M24X12 M23X11 M23X25 M23X24)
+M22X24->(M24X23 M23X22 M23X21 M23X20)
+M22X25->(M24X19 M23X18 M23X17 M23X16)
+M23X11->(M25X17 M24X16 M24X15 M24X14)
+M23X12->(M13X13 M25X12 M24X11 M24X25 M24X24)
+M23X13->(M25X23 M24X22 M24X21 M24X20)
+M23X14->(M25X19 M24X18 M24X17 M24X16)
+M23X15->(M25X15 M24X14 M24X13 M24X12)
+M23X16->(M25X11 M24X25 M24X24 M24X23)
+M23X17->(M25X22 M24X21 M24X20 M24X19)
+M23X18->(M25X18 M24X17 M24X16 M24X15)
+M23X19->(M25X14 M24X13 M24X12 M24X11)
+M23X20->(M25X25 M24X24 M24X23 M24X22)
+M23X21->(M25X21 M24X20 M24X19 M24X18)
+M23X22->(M25X17 M24X16 M24X15 M24X14)
+M23X23->(M25X13 M24X12 M24X11 M24X25)
+M23X24->(M25X24 M24X23 M24X22 M24X21)
+M23X25->(M25X20 M24X19 M24X18 M24X17)
+M24X11->(M26X18 M25X17 M25X16 M25X15)
+M24X12->(M14X14 M26X13 M25X12 M25X11 M25X25)
+M24X13->(M26X24 M25X23 M25X22 M25X21)
+M24X14->(M26X20 M25X19 M25X18 M25X17)
+M24X15->(M26X16 M25X15 M25X14 M25X13)
+M24X16->(M26X12 M25X11 M25X25 M25X24)
+M24X17->(M26X23 M25X22 M25X21 M25X20)
+M24X18->(M26X19 M25X18 M25X17 M25X16)
+M24X19->(M26X15 M25X14 M25X13 M25X12)
+M24X20->(M26X11 M25X25 M25X24 M25X23)
+M24X21->(M26X22 M25X21 M25X20 M25X19)
+M24X22->(M26X18 M25X17 M25X16 M25X15)
+M24X23->(M26X14 M25X13 M25X12 M25X11)
+M24X24->(M26X25 M25X24 M25X23 M25X22)
+M24X25->(M26X21 M25X20 M25X19 M25X18)
+M25X11->(M27X19 M26X18 M26X17 M26X16)
+M25X12->(M15X15 M27X14 M26X13 M26X12 M26X11)
+M25X13->(M27X25 M26X24 M26X23 M26X22)
+M25X14->(M27X21 M26X20 M26X19 M26X18)
+M25X15->(M27X17 M26X16 M26X15 M26X14)
+M25X16->(M27X13 M26X12 M26X11 M26X25)
+M25X17->(M27X24 M26X23 M26X22 M26X21)
+M25X18->(M27X20 M26X19 M26X18 M26X17)
+M25X19->(M27X16 M26X15 M26X14 M26X13)
+M25X20->(M27X12 M26X11 M26X25 M26X24)
+M25X21->(M27X23 M26X22 M26X21 M26X20)
+M25X22->(M27X19 M26X18 M26X17 M26X16)
+M25X23->(M27X15 M26X14 M26X13 M26X12)
+M25X24->(M27X11 M26X25 M26X24 M26X23)
+M25X25->(M27X22 M26X21 M26X20 M26X19)
+M26X11->(M28X20 M27X19 M27X18 M27X17)
+M26X12->(M16X16 M28X15 M27X14 M27X13 M27X12)
+M26X13->(M28X11 M27X25 M27X24 M27X23)
+M26X14->(M28X22 M27X21 M27X20 M27X19)
+M26X15->(M28X18 M27X17 M27X16 M27X15)
+M26X16->(M28X14 M27X13 M27X12 M27X11)
+M26X17->(M28X25 M27X24 M27X23 M27X22)
+M26X18->(M28X21 M27X20 M27X19 M27X18)
+M26X19->(M28X17 M27X16 M27X15 M27X14)
+M26X20->(M28X13 M27X12 M27X11 M27X25)
+M26X21->(M28X24 M27X23 M27X22 M27X21)
+M26X22->(M28X20 M27X19 M27X18 M27X17)
+M26X23->(M28X16 M27X15 M27X14 M27X13)
+M26X24->(M28X12 M27X11 M27X25 M27X24)
+M26X25->(M28X23 M27X22 M27X21 M27X20)
+M27X11->(M29X21 M28X20 M28X19 M28X18)
+M27X12->(M17X17 M29X16 M28X15 M28X14 M28X13)
+M27X13->(M29X12 M28X11 M28X25 M28X24)
+M27X14->(M29X23 M28X22 M28X21 M28X20)
+M27X15->(M29X19 M28X18 M28X17 M28X16)
+M27X16->(M29X15 M28X14 M28X13 M28X12)
+M27X17->(M29X11 M28X25 M28X24 M28X23)
+M27X18->(M29X22 M28X21 M28X20 M28X19)
+M27X19->(M29X18 M28X17 M28X16 M28X15)
+M27X20->(M29X14 M28X13 M28X12 M28X11)
+M27X21->(M29X25 M28X24 M28X23 M28X22)
+M27X22->(M29X21 M28X20 M28X19 M28X18)
+M27X23->(M29X17 M28X16 M28X15 M28X14)
+M27X24->(M29X13 M28X12 M28X11 M28X25)
+M27X25->(M29X24 M28X23 M28X22 M28X21)
+M28X11->(M30X22 M29X21 M29X20 M29X19)
+M28X12->(M18X18 M30X17 M29X16 M29X15 M29X14)
+M28X13->(M30X13 M29X12 M29X11 M29X25)
+M28X14->(M30X24 M29X23 M29X22 M29X21)
+M28X15->(M30X20 M29X19 M29X18 M29X17)
+M28X16->(M30X16 M29X15 M29X14 M29X13)
+M28X17->(M30X12 M29X11 M29X25 M29X24)
+M28X18->(M30X23 M29X22 M29X21 M29X20)
+M28X19->(M30X19 M29X18 M29X17 M29X16)
+M28X20->(M30X15 M29X14 M29X13 M29X12)
+M28X21->(M30X11 M29X25 M29X24 M29X23)
+M28X22->(M30X22 M29X21 M29X20 M29X19)
+M28X23->(M30X18 M29X17 M29X16 M29X15)
+M28X24->(M30X14 M29X13 M29X12 M29X11)
+M28X25->(M30X25 M29X24 M29X23 M29X22)
+M29X11->(M30X22 M30X21 M30X20)
+M29X12->(M30X17 M30X16 M30X15)
+M29X13->(M30X13 M30X12 M30X11)
+M29X14->(M30X24 M30X23 M30X22)
+M29X15->(M30X20 M30X19 M30X18)
+M29X16->(M30X16 M30X15 M30X14)
+M29X17->(M30X12 M30X11 M30X25)
+M29X18->(M30X23 M30X22 M30X21)
+M29X19->(M30X19 M30X18 M30X17)
+M29X20->(M30X15 M30X14 M30X13)
+M29X21->(M30X11 M30X25 M30X24)
+M29X22->(M30X22 M30X21 M30X20)
+M29X23->(M30X18 M30X17 M30X16)
+M29X24->(M30X14 M30X13 M30X12)
+M29X25->(M30X25 M30X24 M30X23)
+M30X11
+M30X12
+M30X13
+M30X14
+M30X15
+M30X16
+M30X17
+M30X18
+M30X19
+M30X20
+M30X21
+M30X22
+M30X23
+M30X24
+M30X25
+xfail_output(glibc.rtld.dynamic_sort=1): M30X19>M30X15>M30X16>M30X11>M30X12>M30X17>M30X13>M30X14>M29X20>M30X23>M30X24>M30X20>M30X18>M29X15>M29X12>M30X22>M30X21>M29X22>M30X25>M29X19>M29X23>M29X16>M29X24>M29X13>M29X17>M29X18>M28X19>M29X21>M29X25>M29X14>M28X20>M28X15>M28X16>M28X21>M27X18>M29X11>M28X17>M28X11>M28X22>M27X14>M28X18>M27X15>M28X13>M27X11>M28X23>M27X25>M28X14>M28X25>M27X23>M27X22>M28X24>M27X21>M27X13>M27X19>M27X17>M26X11>M26X23>M26X21>M26X22>M26X20>M26X16>M25X21>M17X22>M15X15>M20X14>M20X16>M18X18>M28X12>M27X24>M25X17>M27X20>M26X18>M26X17>M27X16>M26X19>M25X18>M26X24>M25X20>M24X17>M23X18>M25X13>M26X13>M17X23>M16X16>M26X12>M25X12>M26X15>M24X19>M25X23>M25X24>M25X25>M24X20>M25X19>M24X21>M23X17>M22X21>M24X14>M23X22>M24X24>M22X20>M24X13>M25X11>M24X12>M25X15>M23X15>M25X16>M24X22>M23X13>M24X18>M23X14>M22X22>M21X20>M24X25>M23X16>M22X25>M21X19>M22X14>M23X11>M22X15>M21X18>M22X19>M21X17>M20X17>M19X17>M21X24>M21X12>M20X22>M19X16>M18X25>M19X21>M19X20>M18X24>M20X12>M19X11>M23X20>M22X24>M22X16>M21X21>M25X14>M23X19>M23X24>M20X24>M19X12>M18X15>M17X14>M16X18>M14X25>M16X22>M16X20>M17X17>M22X12>M21X11>M20X15>M18X22>M19X24>M19X18>M18X21>M17X16>M17X18>M16X21>M15X20>M19X22>M18X20>M18X11>M17X19>M16X17>M15X21>M16X14>M16X13>M15X22>M14X20>M17X25>M16X19>M14X21>M13X24>M12X12>M16X24>M15X23>M14X16>M16X15>M15X25>M15X11>M15X12>M14X15>M13X14>M14X22>M13X20>M12X13>M11X11>M22X23>M21X15>M21X16>M20X21>M20X20>M18X17>M19X25>M18X23>M21X13>M15X17>M15X18>M18X19>M17X24>M16X12>M17X13>M20X25>M19X23>M15X19>M14X13>M13X18>M15X13>M17X12>M16X11>M18X13>M18X12>M14X11>M14X24>M13X19>M15X14>M17X20>M20X11>M20X13>M21X14>M15X24>M14X12>M13X22>M14X23>M13X23>M14X19>M17X15>M16X25>M17X11>M18X14>M19X19>M21X25>M13X12>M13X11>M14X18>M13X13>M12X11>M15X16>M14X14>M27X12>M17X21>M20X23>M22X13>M21X22>M24X16>M24X15>M26X25>M23X25>M26X14>M23X12>M22X18>M24X11>M16X23>M19X14>M19X13>M21X23>M22X17>M23X23>M23X21>M25X22>M18X16>M19X15>M20X18>M20X19>M22X11>M24X23>C156>C118>C143>C137>C147>C106>C168>C113>C163>C155>C105>C146>C187>A150>C139>C180>C164>C193>C157>A191>C158>B188>A159>C184>C121>C154>B171>A105>C131>C104>B104>C161>C111>B145>C160>B155>A163>C112>C142>B148>C133>B198>A198>A115>C114>B157>A156>C175>B144>A120>C173>B184>A174>C126>B107>A139>C194>B194>A194>C116>B116>C166>B160>B110>A110>C128>B128>A128>C179>B162>A154>C186>B187>A179>C124>B181>A101>C153>B158>A136>C135>C176>A192>B133>A133>C177>B177>A177>C185>C103>B141>A141>C183>A162>C192>C129>B179>C144>B124>B183>C127>B127>A127>B108>A112>B153>A153>C167>B167>A186>A122>C162>A144>B149>C174>B131>A185>C141>B106>A126>A167>C140>B122>A170>C198>B143>C117>C123>B123>A147>A106>C200>B169>C191>B175>A123>B118>A182>C132>B151>A145>A104>A109>C159>C150>B119>A119>A178>B164>B114>A164>C181>A102>C122>B134>A157>A116>C195>B191>B111>C172>B172>A118>B129>A129>C149>A107>C170>B197>A197>A173>B168>A132>C107>B165>A160>A131>C188>A168>B109>C178>A189>A148>C119>C190>C120>B166>B176>C108>B135>B139>A103>B178>A169>B132>C125>C138>B163>A111>B170>C110>A165>C151>C169>C199>A138>C182>A135>B101>B142>C101>C148>B193>B152>A158>A199>C136>B137>A161>B120>A108>A149>A125>B113>A184>C171>A134>A175>A124>B150>B161>B102>A146>A187>C130>B192>B200>A200>A142>A183>C102>B105>B156>A176>C165>B147>A137>A196>B190>A190>B125>C134>C189>B126>B186>A166>B136>B195>A195>B154>B138>B112>B173>A117>B159>B182>A181>A140>C145>B117>A152>A193>C197>B130>A172>A113>A151>B115>A143>B140>B185>B103>A121>A180>A130>A171>B199>C196>B146>B180>C115>B174>B121>A188>B196>B189>C152>C109>A155>A114>M14X17>M13X15>M13X16>M13X17>M12X17>M12X21>M12X25>M12X14>M13X25>M12X15>M13X21>M12X16>M12X18>M12X19>M12X20>M12X22>M12X23>M12X24>M11X25>M11X24>M11X23>M11X22>M11X21>M11X20>M11X19>M11X18>M11X17>M11X16>M11X15>M11X14>M11X13>M11X12>{}<M11X12<M11X13<M11X14<M11X15<M11X16<M11X17<M11X18<M11X19<M11X20<M11X21<M11X22<M11X23<M11X24<M11X25<M12X24<M12X23<M12X22<M12X20<M12X19<M12X18<M12X16<M13X21<M12X15<M13X25<M12X14<M12X25<M12X21<M12X17<M13X17<M13X16<M13X15<M14X17<A114<A155<C109<C152<B189<B196<A188<B121<B174<C115<B180<B146<C196<B199<A171<A130<A180<A121<B103<B185<B140<A143<B115<A151<A113<A172<B130<C197<A193<A152<B117<C145<A140<A181<B182<B159<A117<B173<B112<B138<B154<A195<B195<B136<A166<B186<B126<C189<C134<B125<A190<B190<A196<A137<B147<C165<A176<B156<B105<C102<A183<A142<A200<B200<B192<C130<A187<A146<B102<B161<B150<A124<A175<A134<C171<A184<B113<A125<A149<A108<B120<A161<B137<C136<A199<A158<B152<B193<C148<C101<B142<B101<A135<C182<A138<C199<C169<C151<A165<C110<B170<A111<B163<C138<C125<B132<A169<B178<A103<B139<B135<C108<B176<B166<C120<C190<C119<A148<A189<C178<B109<A168<C188<A131<A160<B165<C107<A132<B168<A173<A197<B197<C170<A107<C149<A129<B129<A118<B172<C172<B111<B191<C195<A116<A157<B134<C122<A102<C181<A164<B114<B164<A178<A119<B119<C150<C159<A109<A104<A145<B151<C132<A182<B118<A123<B175<C191<B169<C200<A106<A147<B123<C123<C117<B143<C198<A170<B122<C140<A167<A126<B106<C141<A185<B131<C174<B149<A144<C162<A122<A186<B167<C167<A153<B153<A112<B108<A127<B127<C127<B183<B124<C144<B179<C129<C192<A162<C183<A141<B141<C103<C185<A177<B177<C177<A133<B133<A192<C176<C135<A136<B158<C153<A101<B181<C124<A179<B187<C186<A154<B162<C179<A128<B128<C128<A110<B110<B160<C166<B116<C116<A194<B194<C194<A139<B107<C126<A174<B184<C173<A120<B144<C175<A156<B157<C114<A115<A198<B198<C133<B148<C142<C112<A163<B155<C160<B145<C111<C161<B104<C104<C131<A105<B171<C154<C121<C184<A159<B188<C158<A191<C157<C193<C164<C180<C139<A150<C187<C146<C105<C155<C163<C113<C168<C106<C147<C137<C143<C118<C156<M24X23<M22X11<M20X19<M20X18<M19X15<M18X16<M25X22<M23X21<M23X23<M22X17<M21X23<M19X13<M19X14<M16X23<M24X11<M22X18<M23X12<M26X14<M23X25<M26X25<M24X15<M24X16<M21X22<M22X13<M20X23<M17X21<M27X12<M14X14<M15X16<M12X11<M13X13<M14X18<M13X11<M13X12<M21X25<M19X19<M18X14<M17X11<M16X25<M17X15<M14X19<M13X23<M14X23<M13X22<M14X12<M15X24<M21X14<M20X13<M20X11<M17X20<M15X14<M13X19<M14X24<M14X11<M18X12<M18X13<M16X11<M17X12<M15X13<M13X18<M14X13<M15X19<M19X23<M20X25<M17X13<M16X12<M17X24<M18X19<M15X18<M15X17<M21X13<M18X23<M19X25<M18X17<M20X20<M20X21<M21X16<M21X15<M22X23<M11X11<M12X13<M13X20<M14X22<M13X14<M14X15<M15X12<M15X11<M15X25<M16X15<M14X16<M15X23<M16X24<M12X12<M13X24<M14X21<M16X19<M17X25<M14X20<M15X22<M16X13<M16X14<M15X21<M16X17<M17X19<M18X11<M18X20<M19X22<M15X20<M16X21<M17X18<M17X16<M18X21<M19X18<M19X24<M18X22<M20X15<M21X11<M22X12<M17X17<M16X20<M16X22<M14X25<M16X18<M17X14<M18X15<M19X12<M20X24<M23X24<M23X19<M25X14<M21X21<M22X16<M22X24<M23X20<M19X11<M20X12<M18X24<M19X20<M19X21<M18X25<M19X16<M20X22<M21X12<M21X24<M19X17<M20X17<M21X17<M22X19<M21X18<M22X15<M23X11<M22X14<M21X19<M22X25<M23X16<M24X25<M21X20<M22X22<M23X14<M24X18<M23X13<M24X22<M25X16<M23X15<M25X15<M24X12<M25X11<M24X13<M22X20<M24X24<M23X22<M24X14<M22X21<M23X17<M24X21<M25X19<M24X20<M25X25<M25X24<M25X23<M24X19<M26X15<M25X12<M26X12<M16X16<M17X23<M26X13<M25X13<M23X18<M24X17<M25X20<M26X24<M25X18<M26X19<M27X16<M26X17<M26X18<M27X20<M25X17<M27X24<M28X12<M18X18<M20X16<M20X14<M15X15<M17X22<M25X21<M26X16<M26X20<M26X22<M26X21<M26X23<M26X11<M27X17<M27X19<M27X13<M27X21<M28X24<M27X22<M27X23<M28X25<M28X14<M27X25<M28X23<M27X11<M28X13<M27X15<M28X18<M27X14<M28X22<M28X11<M28X17<M29X11<M27X18<M28X21<M28X16<M28X15<M28X20<M29X14<M29X25<M29X21<M28X19<M29X18<M29X17<M29X13<M29X24<M29X16<M29X23<M29X19<M30X25<M29X22<M30X21<M30X22<M29X12<M29X15<M30X18<M30X20<M30X24<M30X23<M29X20<M30X14<M30X13<M30X17<M30X12<M30X11<M30X16<M30X15<M30X19
+output(glibc.rtld.dynamic_sort=2): M30X19>M30X15>M30X16>M30X11>M30X12>M30X17>M30X13>M30X14>M29X20>M30X23>M30X24>M30X20>M30X18>M29X15>M29X12>M30X22>M30X21>M29X22>M30X25>M29X19>M29X23>M29X16>M29X24>M29X13>M29X17>M29X18>M28X19>M29X21>M29X25>M29X14>M28X20>M28X15>M28X16>M28X21>M27X18>M29X11>M28X17>M28X11>M28X22>M28X24>M28X23>M27X21>M28X13>M27X20>M27X19>M26X14>M27X25>M28X18>M27X11>M28X25>M27X24>M26X24>M27X15>M27X14>M27X13>M26X23>M27X17>M26X22>M25X13>M28X14>M27X16>M26X19>M26X18>M27X23>M27X22>M26X17>M25X18>M26X21>M25X17>M26X20>M26X15>M26X13>M25X19>M24X14>M25X23>M26X11>M26X25>M25X16>M25X15>M24X22>M25X21>M25X20>M24X21>M25X25>M25X24>M24X20>M23X13>M22X15>M25X14>M24X19>M23X17>M24X25>M23X24>M24X13>M23X15>M24X18>M23X14>M22X11>M24X15>M23X22>M24X11>M23X19>M22X21>M24X24>M23X21>M22X20>M23X25>M22X19>M21X24>M20X23>M22X22>M25X11>M23X16>M22X18>M23X20>M22X17>M21X21>M21X20>M20X24>M22X14>M22X13>M21X11>M21X17>M22X23>M21X16>M20X25>M19X23>M18X16>M21X22>M20X20>M20X19>M21X13>M20X18>M19X13>M21X18>M20X21>M19X24>M18X12>M20X14>M20X13>M22X25>M20X12>M20X15>M19X14>M18X22>M19X18>M20X17>M19X17>M19X16>M18X21>M17X20>M19X19>M18X13>M17X11>M18X17>M19X25>M18X15>M17X25>M18X19>M17X24>M16X19>M15X17>M17X21>M16X24>M18X23>M17X16>M16X25>M19X15>M18X25>M17X23>M16X23>M15X23>M18X14>M17X14>M16X14>M17X18>M16X13>M17X22>M16X12>M15X22>M14X16>M17X12>M16X22>M15X12>M16X11>M15X11>M16X15>M15X25>M14X15>M13X14>M15X18>M16X21>M15X16>M14X21>M15X14>M16X20>M15X13>M14X22>M15X20>M14X20>M13X20>M14X11>M15X19>M14X24>M13X19>M14X13>M13X18>M12X13>M15X24>M14X23>M13X12>M14X12>M13X11>M12X11>M11X11>M21X12>M20X11>M19X11>M18X11>M17X15>M16X18>M14X25>M14X19>M13X24>M13X23>M13X22>M12X12>M22X12>M21X15>M19X22>M18X20>M16X17>M14X14>M24X12>M23X23>M22X16>M21X14>M20X22>M18X24>M16X16>M26X12>M24X16>M23X11>M21X23>M19X20>M17X17>M27X12>M26X16>M25X22>M24X17>M23X18>M21X25>M19X12>M17X19>M15X21>M14X18>M13X13>M23X12>M21X19>M19X21>M17X13>M15X15>M25X12>M24X23>M22X24>M20X16>M18X18>M28X12>A150>C158>B112>A112>C167>B146>A146>C180>B180>A180>C143>B143>A115>C126>B126>A126>C190>B190>A190>C138>B138>A138>C174>B174>A102>C122>B122>A122>C162>B162>A162>C142>B142>A142>C102>B102>A174>C176>B176>A176>C115>B115>A143>C172>B172>A172>C187>B187>A187>C130>B130>A130>C118>B118>A118>C184>B184>A184>C171>B171>A171>C168>B182>A182>C182>B168>A168>C109>B109>A109>C159>B159>A159>C134>B134>A134>C146>B167>A167>C140>B140>A140>C163>B163>A163>C112>B158>A158>C164>B164>A164>C131>B131>A131>C188>B188>A188>C199>B199>A199>C114>B114>A114>C106>B106>A106>C200>B200>A200>C183>B183>A183>C152>B152>A152>C147>B147>A147>C150>B150>A198>C144>B144>A144>C191>B191>A191>C108>B108>A108>C139>B139>A139>C194>B194>A194>C166>B166>A166>C120>B120>A120>C123>B123>A123>C132>B132>A132>C107>B107>A107>C170>B170>A170>C198>B198>A156>C125>B125>A125>C121>B121>A121>C193>B193>A193>C197>B197>A197>C175>B175>A175>C196>B196>A196>C105>B105>A105>C181>B181>A181>C113>B113>A113>C137>B137>A137>C155>B155>A155>C156>B156>A110>C128>B128>A128>C179>B179>A179>C124>B124>A124>C151>B151>A151>C178>B178>A178>C104>B104>A104>C111>B111>A111>C148>B148>A148>C169>B169>A169>C129>B129>A129>C149>B149>A149>C189>B189>A189>C119>B119>A119>C154>B154>A154>C136>B136>A136>C135>B135>A135>C116>B116>A116>C145>B145>A145>C161>B161>A161>C173>B173>A173>C157>B157>A157>C195>B195>A195>C186>B186>A186>C160>B160>A160>C153>B153>A153>C117>B117>A117>C165>B165>A165>C101>B101>A101>C103>B103>A103>C192>B192>A192>C177>B177>A177>C185>B185>A185>C141>B141>A141>C133>B133>A133>C127>B127>A127>C110>B110>M14X17>M13X15>M13X16>M13X17>M12X17>M12X21>M12X25>M12X14>M13X25>M12X15>M13X21>M12X16>M12X18>M12X19>M12X20>M12X22>M12X23>M12X24>M11X25>M11X24>M11X23>M11X22>M11X21>M11X20>M11X19>M11X18>M11X17>M11X16>M11X15>M11X14>M11X13>M11X12>{}<M11X12<M11X13<M11X14<M11X15<M11X16<M11X17<M11X18<M11X19<M11X20<M11X21<M11X22<M11X23<M11X24<M11X25<M12X24<M12X23<M12X22<M12X20<M12X19<M12X18<M12X16<M13X21<M12X15<M13X25<M12X14<M12X25<M12X21<M12X17<M13X17<M13X16<M13X15<M14X17<B110<C110<A127<B127<C127<A133<B133<C133<A141<B141<C141<A185<B185<C185<A177<B177<C177<A192<B192<C192<A103<B103<C103<A101<B101<C101<A165<B165<C165<A117<B117<C117<A153<B153<C153<A160<B160<C160<A186<B186<C186<A195<B195<C195<A157<B157<C157<A173<B173<C173<A161<B161<C161<A145<B145<C145<A116<B116<C116<A135<B135<C135<A136<B136<C136<A154<B154<C154<A119<B119<C119<A189<B189<C189<A149<B149<C149<A129<B129<C129<A169<B169<C169<A148<B148<C148<A111<B111<C111<A104<B104<C104<A178<B178<C178<A151<B151<C151<A124<B124<C124<A179<B179<C179<A128<B128<C128<A110<B156<C156<A155<B155<C155<A137<B137<C137<A113<B113<C113<A181<B181<C181<A105<B105<C105<A196<B196<C196<A175<B175<C175<A197<B197<C197<A193<B193<C193<A121<B121<C121<A125<B125<C125<A156<B198<C198<A170<B170<C170<A107<B107<C107<A132<B132<C132<A123<B123<C123<A120<B120<C120<A166<B166<C166<A194<B194<C194<A139<B139<C139<A108<B108<C108<A191<B191<C191<A144<B144<C144<A198<B150<C150<A147<B147<C147<A152<B152<C152<A183<B183<C183<A200<B200<C200<A106<B106<C106<A114<B114<C114<A199<B199<C199<A188<B188<C188<A131<B131<C131<A164<B164<C164<A158<B158<C112<A163<B163<C163<A140<B140<C140<A167<B167<C146<A134<B134<C134<A159<B159<C159<A109<B109<C109<A168<B168<C182<A182<B182<C168<A171<B171<C171<A184<B184<C184<A118<B118<C118<A130<B130<C130<A187<B187<C187<A172<B172<C172<A143<B115<C115<A176<B176<C176<A174<B102<C102<A142<B142<C142<A162<B162<C162<A122<B122<C122<A102<B174<C174<A138<B138<C138<A190<B190<C190<A126<B126<C126<A115<B143<C143<A180<B180<C180<A146<B146<C167<A112<B112<C158<A150<M28X12<M18X18<M20X16<M22X24<M24X23<M25X12<M15X15<M17X13<M19X21<M21X19<M23X12<M13X13<M14X18<M15X21<M17X19<M19X12<M21X25<M23X18<M24X17<M25X22<M26X16<M27X12<M17X17<M19X20<M21X23<M23X11<M24X16<M26X12<M16X16<M18X24<M20X22<M21X14<M22X16<M23X23<M24X12<M14X14<M16X17<M18X20<M19X22<M21X15<M22X12<M12X12<M13X22<M13X23<M13X24<M14X19<M14X25<M16X18<M17X15<M18X11<M19X11<M20X11<M21X12<M11X11<M12X11<M13X11<M14X12<M13X12<M14X23<M15X24<M12X13<M13X18<M14X13<M13X19<M14X24<M15X19<M14X11<M13X20<M14X20<M15X20<M14X22<M15X13<M16X20<M15X14<M14X21<M15X16<M16X21<M15X18<M13X14<M14X15<M15X25<M16X15<M15X11<M16X11<M15X12<M16X22<M17X12<M14X16<M15X22<M16X12<M17X22<M16X13<M17X18<M16X14<M17X14<M18X14<M15X23<M16X23<M17X23<M18X25<M19X15<M16X25<M17X16<M18X23<M16X24<M17X21<M15X17<M16X19<M17X24<M18X19<M17X25<M18X15<M19X25<M18X17<M17X11<M18X13<M19X19<M17X20<M18X21<M19X16<M19X17<M20X17<M19X18<M18X22<M19X14<M20X15<M20X12<M22X25<M20X13<M20X14<M18X12<M19X24<M20X21<M21X18<M19X13<M20X18<M21X13<M20X19<M20X20<M21X22<M18X16<M19X23<M20X25<M21X16<M22X23<M21X17<M21X11<M22X13<M22X14<M20X24<M21X20<M21X21<M22X17<M23X20<M22X18<M23X16<M25X11<M22X22<M20X23<M21X24<M22X19<M23X25<M22X20<M23X21<M24X24<M22X21<M23X19<M24X11<M23X22<M24X15<M22X11<M23X14<M24X18<M23X15<M24X13<M23X24<M24X25<M23X17<M24X19<M25X14<M22X15<M23X13<M24X20<M25X24<M25X25<M24X21<M25X20<M25X21<M24X22<M25X15<M25X16<M26X25<M26X11<M25X23<M24X14<M25X19<M26X13<M26X15<M26X20<M25X17<M26X21<M25X18<M26X17<M27X22<M27X23<M26X18<M26X19<M27X16<M28X14<M25X13<M26X22<M27X17<M26X23<M27X13<M27X14<M27X15<M26X24<M27X24<M28X25<M27X11<M28X18<M27X25<M26X14<M27X19<M27X20<M28X13<M27X21<M28X23<M28X24<M28X22<M28X11<M28X17<M29X11<M27X18<M28X21<M28X16<M28X15<M28X20<M29X14<M29X25<M29X21<M28X19<M29X18<M29X17<M29X13<M29X24<M29X16<M29X23<M29X19<M30X25<M29X22<M30X21<M30X22<M29X12<M29X15<M30X18<M30X20<M30X24<M30X23<M29X20<M30X14<M30X13<M30X17<M30X12<M30X11<M30X16<M30X15<M30X19
diff --git a/scripts/dso-ordering-test.py b/scripts/dso-ordering-test.py
new file mode 100644
index 0000000000..5dfb3476fa
--- /dev/null
+++ b/scripts/dso-ordering-test.py
@@ -0,0 +1,1150 @@ 
+#!/usr/bin/python3
+# Generate testcase files and Makefile fragments for DSO sorting test
+# Copyright (C) 2021 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+"""Generate testcase files and Makefile fragments for DSO sorting test
+
+This script takes a small description string language, and generates
+testcases for displaying the ELF dynamic linker's dependency sorting
+behavior, allowing verification.
+
+Testcase descriptions are semicolon-separated description strings, and
+this tool generates a testcase from the description, including main program,
+associated modules, and Makefile fragments for including into elf/Makefile.
+
+This allows automation of what otherwise would be very laborous manual
+construction of complex dependency cases, however it must be noted that this
+is only a tool to speed up testcase construction, and thus the generation
+features are largely mechanical in nature; inconsistencies or errors may occur
+if the input description was itself erroronous or have unforeseen interactions.
+
+The format of the input test description files are:
+
+  # Each test description has a name, lines of description,
+  # and an expected output specification. Comments use '#'.
+  testname1: <test-description-line>
+  output: <expected-output-string>
+
+  # Tests can be marked to be XFAIL by using 'xfail_output' instead
+  testname2: <test-description-line>
+  xfail_output: <expected-output-string>
+
+  # A default set of GLIBC_TUNABLES tunables can be specified, for which
+  # all following tests will run multiple times, once for each of the
+  # GLIBC_TUNABLES=... strings set by the 'tunable_option' command.
+  tunable_option: <glibc-tunable-string1>
+  tunable_option: <glibc-tunable-string2>
+
+  # Test descriptions can use multiple lines, which will all be merged
+  # together, so order is not important.
+  testname3: <test-description-line>
+  <test-description-line>
+  <test-description-line>
+  ...
+  output: <expected-output-string>
+
+  # 'testname3' will be run and compared two times, for both
+  # GLIBC_TUNABLES=<glibc-tunable-string1> and
+  # GLIBC_TUNABLES=<glibc-tunable-string2>. This can be cleared and reset by the
+  # 'clear_tunables' command:
+  clear_tunables
+
+  # Multiple expected outputs can also be specified, with an associated
+  # tunable option in (), which multiple tests will be run with each
+  # GLIBC_TUNABLES=... option tried.
+  testname4:
+  <test-description-line>
+  ...
+  output(<glibc-tunable-string1>): <expected-output-string-1>
+  output(<glibc-tunable-string2>): <expected-output-string-2>
+  # Individual tunable output cases can be XFAILed, though note that
+  # this will have the effect of XFAILing the entire 'testname4' test
+  # in the final top-level tests.sum summary.
+  xfail_output(<glibc-tunable-string3>): <expected-output-string-3>
+
+  # When multiple outputs (with specific tunable strings) are specified,
+  # these take priority over any active 'tunable_option' settings.
+
+  # When a test is meant to be placed under 'xtests' (not run under
+  # "make check", but only when "make xtests" is used), the testcase name can be
+  # declared using 'xtest(<test-name>)':
+  ...
+  xtest(test-too-big1): <test-description>
+  output: <expected-output-string>
+  ...
+
+  # Do note that under current elf/Makefile organization, for such a xtest case,
+  # while the test execution is only run under 'make xtests', the associated
+  # DSOs are always built even under 'make check'.
+
+On the description language used, an example description line string:
+
+  a->b!->[cdef];c=>g=>h;{+c;%c;-c}->a
+
+Each identifier represents a shared object module, currently sequences of
+letters/digits are allowed, case-sensitive.
+
+All such shared objects have a constructor/destructor generated for them
+that emits its name followed by a '>' for constructors, and '<' followed by
+its name for destructors, e.g. if the name is 'obj1', then "obj1>" and "<obj1"
+is printed by its constructor/destructor respectively.
+
+The -> operator specifies a link time dependency, these can be chained for
+convenience (e.g. a->b->c->d).
+
+The => operator creates a call-reference, e.g. for a=>b, an fn_a() function
+is created inside module 'a', which calls fn_b() in module 'b'.
+These module functions emit 'name()' output in nested form,
+e.g. a=>b emits 'a(b())'
+
+For single character object names, square brackets [] in the description
+allows specifiying multiple objects; e.g. a->[bcd]->e is equivalent to
+ a->b->e;a->c->e;a->d->e
+
+The () parenthesis construct with space separated names is also allowed for
+specifying objects. For names with integer suffixes a range can also be used,
+e.g. (foo1 bar2-5), specifies DSOs foo1, bar2, bar2, bar3, bar4, bar5.
+
+A {} construct specifies the main test program, and its link dependencies
+are also specified using ->. Inside {}, a few ;-seperated constructs are
+allowed:
+         +a   Loads module a using dlopen(RTLD_LAZY|RTLD_GLOBAL)
+         ^a   Loads module a using dlopen(RTLD_LAZY)
+         %a   Use dlsym() to load and call fn_a()
+         @a   Calls fn_a() directly.
+         -a   Unloads module a using dlclose()
+
+The generated main program outputs '{' '}' with all output from above
+constructs in between. The other output before/after {} are the ordered
+constructor/destructor output.
+
+If no {} construct is present, a default empty main program is linked
+against all objects which have no dependency linked to it. e.g. for
+'[ab]->c;d->e', the default main program is equivalent to '{}->[abd]'
+
+Sometimes for very complex or large testcases, besides specifying a
+few explicit dependencies from main{}, the above default dependency
+behavior is still useful to automatically have, but is turned off
+upon specifying a single explicit {}->dso_name.
+In this case, add {}->* to explicitly add this generation behavior:
+
+   # Main program links to 'foo', and all other objects which have no
+   # dependency linked to it.
+   {}->foo,{}->*
+
+Note that '*' works not only on main{}, but can be used as the
+dependency target of any object. Note that it only works as a target,
+not a dependency source.
+
+The '!' operator after object names turns on permutation of its
+dependencies, e.g. while a->[bcd] only generates one set of objects,
+with 'a.so' built with a link line of "b.so c.so d.so", for a!->[bcd]
+permutations of a's dependencies creates multiple testcases with
+different link line orders: "b.so c.so d.so", "c.so b.so d.so",
+"b.so d.so c.so", etc. Note that for a <test-name> specified on
+the script command-line, multiple <test-name_1>, <test-name_2>, etc.
+tests will be generated (e.g. for a!->[bc]!->[de], eight tests with
+different link orders for a, b, and c will be generated)
+
+It is possible to specify the ELF soname field for an object or the
+main program:
+   # DSO 'a' will be linked with the appropriate -Wl,-soname=x setting
+   a->b->c;soname(a)=x
+   # The the main program can also have a soname specified
+   soname({})=y
+
+This can be used to test how ld.so behaves when objects and/or the
+main program have such a field set.
+
+
+Strings Output by Generated Testcase Programs
+
+The text output produced by a generated testcase consists of three main
+parts:
+  1. The constructors' output
+  2. Output from the main program
+  3. Destructors' output
+
+To see by example, a simple test description "a->b->c" generates a testcase
+that when run, outputs: "c>b>a>{}<a<b<c"
+
+Each generated DSO constructor prints its name followed by a '>' character,
+and the "c>b>a" part above is the full constructor output by all DSOs, the
+order indicating that DSO 'c', which does not depend on any other DSO, has
+its constructor run first, followed by 'b' and then 'a'.
+
+Destructor output for each DSO is a '<' character followed by its name,
+reflecting its reverse nature of constructors. In the above example, the
+destructor output part is "<a<b<c".
+
+The middle "{}" part is the main program. In this simple example, nothing
+was specified for the main program, so by default it is implicitly linked
+to the DSO 'a' (with no other DSOs depending on it) and only prints the
+brackets {} with no actions inside.
+
+To see an example with actions inside the main program, lets see an example
+description: c->g=>h;{+c;%c;-c}->a->h
+
+This produces a testcase, that when executed outputs:
+             h>a>{+c[g>c>];%c();-c[<c<g];}<a<h
+
+The constructor and destructor parts display the a->h dependency as expected.
+Inside the main program, the "+c" action triggers a dlopen() of DSO 'c',
+causing another chain of constructors "g>c>" to be triggered. Here it is
+displayed inside [] brackets for each dlopen call. The same is done for "-c",
+a dlclose() of 'c'.
+
+The "%c" output is due to calling to fn_c() inside DSO 'c', this comprises
+of two parts: the '%' character is printed by the caller, here it is the main
+program. The 'c' character is printed from inside fn_c(). The '%' character
+indicates that this is called by a dlsym() of "fn_c". A '@' character would
+mean a direct call (with a symbol reference). These can all be controlled
+by the main test program constructs documented earlier.
+
+The output strings described here is the exact same form placed in
+test description files' "output: <expected output>" line.
+
+
+"""
+import sys
+import re
+import os
+import subprocess
+import argparse
+from collections import OrderedDict
+import itertools
+
+# BUILD_GCC is only used under the --build option,
+# which builds the generated testcase, including DSOs using BUILD_GCC.
+# Mainly for testing purposes, especially debugging of this script,
+# and can be changed here to another toolchain path if needed.
+build_gcc = "gcc"
+
+parser = argparse.ArgumentParser("")
+parser.add_argument("description",
+                    help="Description string of DSO dependency test to be "
+                    "generated (see script source for documentation of "
+                    "description language), either specified here as "
+                    "command line argument, or by input file using "
+                    "-f/--description-file option",
+                    nargs="?", default="")
+parser.add_argument("test_name", help="Identifier for testcase being "
+                    "generated", nargs="?", default="")
+parser.add_argument("--objpfx",
+                    help="Path to place generated files, defaults to "
+                    "current directory if none specified",
+                    nargs="?", default="./")
+parser.add_argument("-m", "--output-makefile",
+                    help="File to write Makefile fragment to, defaults to "
+                    "stdout when option not present", nargs="?", default="")
+parser.add_argument("-f", "--description-file",
+                    help="Input file containing testcase descriptions",
+                    nargs="?", default="")
+parser.add_argument("--build", help="After C testcase generated, build it "
+                    "using gcc (for manual testing purposes)",
+                    action="store_true")
+parser.add_argument("--debug-output", help="Prints some internal data "
+                    "structures; used for debugging of this script",
+                    action="store_true")
+cmdlineargs = parser.parse_args()
+test_name = cmdlineargs.test_name
+description = cmdlineargs.description
+objpfx = cmdlineargs.objpfx
+description_file = cmdlineargs.description_file
+output_makefile = cmdlineargs.output_makefile
+makefile = ""
+default_tunable_options = []
+
+current_input_lineno = 0
+def error(msg):
+    global current_input_lineno
+    print("Error: %s%s" % ((("Line %d, " % current_input_lineno)
+                            if current_input_lineno != 0 else ""),
+                           msg))
+    exit(1)
+
+if(test_name or description) and description_file:
+    error("both command-line testcase and input file specified")
+if test_name and not description:
+    error("command-line testcase name without description string")
+
+# Main class type describing a testcase.
+class TestDescr:
+    def __init__(self):
+        self.objs = []              # list of all DSO objects
+        self.deps = OrderedDict()   # map of DSO object -> list of dependencies
+
+        # map of DSO object -> list of call refs
+        self.callrefs = OrderedDict()
+
+        # map of DSO object -> list of permutations of dependencies
+        self.dep_permutations = OrderedDict()
+
+        # map of DSO object -> SONAME of object (if one is specified)
+        self.soname_map = OrderedDict()
+
+        # list of main program operations
+        self.main_program = []
+        # set if main program needs -ldl
+        self.main_program_needs_ldl = False
+        # set if default dependencies added to main
+        self.main_program_default_deps = True
+
+        self.test_name = ""                   # name of testcase
+        self.expected_outputs = OrderedDict() # expected outputs of testcase
+        self.xfail = False                    # set if this is a XFAIL testcase
+        self.xtest = False                    # set if this is put under 'xtests'
+
+    # Add 'object -> [object, object, ...]' relations to CURR_MAP
+    def __add_deps_internal(self, src_objs, dst_objs, curr_map):
+        for src in src_objs:
+            for dst in dst_objs:
+                if not src in curr_map:
+                    curr_map[src] = []
+                if not dst in curr_map[src]:
+                    curr_map[src].append(dst)
+    def add_deps(self, src_objs, dst_objs):
+        self.__add_deps_internal(src_objs, dst_objs, self.deps)
+    def add_callrefs(self, src_objs, dst_objs):
+        self.__add_deps_internal(src_objs, dst_objs, self.callrefs)
+
+# Process commands inside the {} construct.
+# Note that throughout this script, the main program object is represented
+# by the '#' string.
+def process_main_program(test_descr, mainprog_str):
+    if mainprog_str:
+        test_descr.main_program = mainprog_str.split(';')
+    for s in test_descr.main_program:
+        m = re.match(r"^([+\-%^@])([0-9a-zA-Z]+)$", s)
+        if not m:
+            error("'%s' is not recognized main program operation" % (s))
+        opr = m.group(1)
+        if(opr == '+' or opr == '^' or opr == '%' or opr == '-'):
+            # Determined the main program needs libdl
+            test_descr.main_program_needs_ldl = True
+        obj = m.group(2)
+        if not obj in test_descr.objs:
+            test_descr.objs.append(obj)
+        if opr == '%' or opr == '@':
+            test_descr.add_callrefs(['#'], [obj])
+    # We have a main program specified, turn this off
+    test_descr.main_program_default_deps = False
+
+# For(a1 a2 b1-12) object set descriptions, expand into an object list
+def expand_object_set_string(descr_str):
+    obj_list = []
+    descr_list = descr_str.split()
+    for descr in descr_list:
+        m = re.match(r"^([a-zA-Z][0-9a-zA-Z]*)(-[0-9]+)?$", descr)
+        if not m:
+            error("'%s' is not a valid object set description" % (descr))
+        obj = m.group(1)
+        idx_end = m.group(2)
+        if not idx_end:
+            if not obj in obj_list:
+                obj_list.append(obj)
+        else:
+            idx_end = int(idx_end[1:])
+            m = re.match(r"^([0-9a-zA-Z][a-zA-Z]*)([0-9]+)$", obj)
+            if not m:
+                error("object description '%s' is malformed" % (obj))
+            obj_name = m.group(1)
+            idx_start = int(m.group (2))
+            if idx_start > idx_end:
+                error("index range %s-%s invalid" % (idx_start, idx_end))
+            for i in range(idx_start, idx_end + 1):
+                o = obj_name + str(i)
+                if not o in obj_list:
+                    obj_list.append(o)
+    return obj_list
+
+# Lexer for tokens
+tokenspec = [ ("SONAME",   r"soname\(([0-9a-zA-Z{}]+)\)=([0-9a-zA-Z]+)"),
+              ("OBJ",      r"([0-9a-zA-Z]+)"),
+              ("DEP",      r"->"),
+              ("CALLREF",  r"=>"),
+              ("OBJSET",   r"\[([0-9a-zA-Z]+)\]"),
+              ("OBJSET2",  r"\(([0-9a-zA-Z \-]+)\)"),
+              ("OBJSET3",  r"\*"),
+              ("PROG",     r"{([0-9a-zA-Z;+^\-%@]*)}"),
+              ("PERMUTE",  r"!"),
+              ("SEMICOL",  r";"),
+              ("ERROR",    r".") ]
+tok_re = '|'.join('(?P<%s>%s)' % pair for pair in tokenspec)
+
+# Main line parser of description language
+def parse_description_string(t, descr_str):
+
+    # State used when parsing dependencies
+    curr_objs = []
+    in_dep = False
+    in_callref = False
+    def clear_dep_state():
+        nonlocal in_dep, in_callref
+        in_dep = in_callref = False
+
+    for m in re.finditer(tok_re, descr_str):
+        kind = m.lastgroup
+        value = m.group()
+        if kind == "SONAME":
+            s = re.match(r"soname\(([0-9a-zA-Z{}]+)\)=([0-9a-zA-Z]+)", value)
+            obj = s.group(1)
+            val = s.group(2)
+            if obj == "{}":
+                if '#' in t.soname_map:
+                    error("soname of main program already set")
+                # Adjust to internal name
+                obj = '#'
+            else:
+                if re.match(r"[{}]", obj):
+                    error("invalid object name '%s'" % (obj))
+                if not obj in t.objs:
+                    error("'%s' is not name of already defined object" % (obj))
+                if obj in t.soname_map:
+                    error("'%s' already has soname of '%s' set"
+                          % (obj, t.soname_map[obj]))
+            t.soname_map[obj] = val
+
+        elif kind == "OBJ":
+            if in_dep:
+                t.add_deps(curr_objs, [value])
+            elif in_callref:
+                t.add_callrefs(curr_objs, [value])
+            clear_dep_state()
+            curr_objs = [value]
+            if not value in t.objs:
+                t.objs.append(value)
+
+        elif kind == "OBJSET":
+            objset = value[1:len(value)-1]
+            if in_dep:
+                t.add_deps(curr_objs, list (objset))
+            elif in_callref:
+                t.add_callrefs(curr_objs, list (objset))
+            clear_dep_state()
+            curr_objs = list(objset)
+            for o in list(objset):
+                if not o in t.objs:
+                    t.objs.append(o)
+
+        elif kind == "OBJSET2":
+            descr_str = value[1:len(value)-1]
+            descr_str.strip()
+            objs = expand_object_set_string(descr_str)
+            if not objs:
+                error("empty object set '%s'" % (value))
+            if in_dep:
+                t.add_deps(curr_objs, objs)
+            elif in_callref:
+                t.add_callrefs(curr_objs, objs)
+            clear_dep_state()
+            curr_objs = objs
+            for o in objs:
+                if not o in t.objs:
+                    t.objs.append(o)
+
+        elif kind == "OBJSET3":
+            if in_dep:
+                t.add_deps(curr_objs, ['*'])
+            elif in_callref:
+                t.add_callrefs(curr_objs, ['*'])
+            else:
+                error("non-dependence target set '*' can only be used "
+                      "as target of ->/=> operations")
+            clear_dep_state()
+            curr_objs = ['*']
+
+        elif kind == "PERMUTE":
+            if in_dep or in_callref:
+                error("syntax error, permute operation invalid here")
+            if not curr_objs:
+                error("syntax error, no objects to permute here")
+
+            for obj in curr_objs:
+                if not obj in t.dep_permutations:
+                    # Signal this object has permuted dependencies
+                    t.dep_permutations[obj] = []
+
+        elif kind == "PROG":
+            if t.main_program:
+                error("cannot have more than one main program")
+            if in_dep:
+                error("objects cannot have dependency on main program")
+            if in_callref:
+                # TODO: A DSO can resolve to a symbol in the main binary,
+                # which we syntactically allow here, but haven't yet
+                # implemented.
+                t.add_callrefs(curr_objs, ["#"])
+            process_main_program(t, value[1:len(value)-1])
+            clear_dep_state()
+            curr_objs = ["#"]
+
+        elif kind == "DEP":
+            if in_dep or in_callref:
+                error("syntax error, multiple contiguous ->,=> operations")
+            if '*' in curr_objs:
+                error("non-dependence target set '*' can only be used "
+                      "as target of ->/=> operations")
+            in_dep = True
+
+        elif kind == "CALLREF":
+            if in_dep or in_callref:
+                error("syntax error, multiple contiguous ->,=> operations")
+            if '*' in curr_objs:
+                error("non-dependence target set '*' can only be used "
+                      "as target of ->/=> operations")
+            in_callref = True
+
+        elif kind == "SEMICOL":
+            curr_objs = []
+            clear_dep_state()
+
+        else:
+            error("unknown token '%s'" % (value))
+    return t
+
+
+
+def process_testcase(t):
+    global objpfx
+    assert t.test_name
+
+    base_test_name = t.test_name
+    test_subdir = base_test_name + "-dir"
+    testpfx = objpfx + test_subdir + "/"
+
+    if not os.path.exists(testpfx):
+        os.mkdir(testpfx)
+
+    def find_objs_not_depended_on(t):
+        objs_not_depended_on = []
+        for obj in t.objs:
+            skip = False
+            for r in t.deps.items():
+                if obj in r[1]:
+                    skip = True
+                    break
+            if not skip:
+                objs_not_depended_on.append(obj)
+        return objs_not_depended_on
+
+    non_dep_tgt_objs = find_objs_not_depended_on(t)
+    for obj in t.objs:
+        if obj in t.deps:
+            deps = t.deps[obj]
+            if '*' in deps:
+                t.deps[obj].remove('*')
+                t.add_deps([obj], non_dep_tgt_objs)
+        if obj in t.callrefs:
+            deps = t.callrefs[obj]
+            if '*' in deps:
+                t.deps[obj].remove('*')
+                t.add_callrefs([obj], non_dep_tgt_objs)
+    if "#" in t.deps:
+        deps = t.deps["#"]
+        if '*' in deps:
+            t.deps["#"].remove('*')
+            t.add_deps(["#"], non_dep_tgt_objs)
+
+    # If no main program was specified in dependency description, make a
+    # default main program with deps pointing to all DSOs which are not
+    # depended by another DSO.
+    if t.main_program_default_deps:
+        main_deps = non_dep_tgt_objs
+        if not main_deps:
+            error("no objects for default main program to point "
+                  "dependency to(all objects strongly connected?)")
+        t.add_deps(["#"], main_deps)
+
+    # Some debug output
+    if cmdlineargs.debug_output:
+        print("Testcase: %s" % (t.test_name))
+        print("All objects: %s" % (t.objs))
+        print("--- Static link dependencies ---")
+        for r in t.deps.items():
+            print("%s -> %s" % (r[0], r[1]))
+        print("--- Objects whose dependencies are to be permuted ---")
+        for r in t.dep_permutations.items():
+            print("%s" % (r[0]))
+        print("--- Call reference dependencies ---")
+        for r in t.callrefs.items():
+            print("%s => %s" % (r[0], r[1]))
+        print("--- main program ---")
+        print(t.main_program)
+
+    # Main testcase generation routine, does Makefile fragment generation,
+    # testcase source generation, and if --build specified builds testcase.
+    def generate_testcase(test_descr, test_suffix):
+
+        test_name = test_descr.test_name + test_suffix
+
+        # Print out needed Makefile fragments for use in glibc/elf/Makefile.
+        module_names = ""
+        for o in test_descr.objs:
+            module_names += " " + test_subdir + "/" + test_name + "-" + o
+        makefile.write("modules-names +=%s\n" % (module_names))
+
+        # Depth-first traversal, executing FN(OBJ) in post-order
+        def dfs(t, fn):
+            def dfs_rec(obj, fn, obj_visited):
+                if obj in obj_visited:
+                    return
+                obj_visited[obj] = True
+                if obj in t.deps:
+                    for dep in t.deps[obj]:
+                        dfs_rec(dep, fn, obj_visited)
+                fn(obj)
+
+            obj_visited = {}
+            for obj in t.objs:
+                dfs_rec(obj, fn, obj_visited)
+
+        # Generate link dependencies for all DSOs, done in a DFS fashion.
+        # Usually this doesn't need to be this complex, just listing the direct
+        # dependencies is enough. However to support creating circular
+        # dependency situations, traversing it by DFS and tracking processing
+        # status is the natural way to do it.
+        obj_processed = {}
+        fake_created = {}
+        def gen_link_deps(obj):
+            if obj in test_descr.deps:
+                dso = test_subdir + "/" + test_name + "-" + obj + ".so"
+                dependencies = ""
+                for dep in test_descr.deps[obj]:
+                    if dep in obj_processed:
+                        depstr = (" $(objpfx)" + test_subdir + "/"
+                                  + test_name + "-" + dep + ".so")
+                    else:
+                        # A circular dependency is satisfied by making a
+                        # fake DSO tagged with the correct SONAME
+                        depstr = (" $(objpfx)" + test_subdir + "/"
+                                  + test_name + "-" + dep + ".FAKE.so")
+                        # Create empty C file and Makefile fragments for fake
+                        # object. This only needs to be done at most once for
+                        # an object name.
+                        if not dep in fake_created:
+                            f = open(testpfx + test_name + "-" + dep
+                                     + ".FAKE.c", "w")
+                            f.write(" \n")
+                            f.close()
+                            # Generate rule to create fake object
+                            makefile.write \
+                                ("LDFLAGS-%s = -Wl,--no-as-needed "
+                                 "-Wl,-soname=%s\n"
+                                 % (test_name + "-" + dep + ".FAKE.so",
+                                    ("$(objpfx)" + test_subdir + "/"
+                                     + test_name + "-" + dep + ".so")))
+                            makefile.write \
+                                ("modules-names += %s\n"
+                                 % (test_subdir + "/"
+                                    + test_name + "-" + dep + ".FAKE"))
+                            fake_created[dep] = True
+                    dependencies += depstr
+                makefile.write("$(objpfx)%s:%s\n" % (dso, dependencies))
+            # Mark obj as processed
+            obj_processed[obj] = True
+
+        dfs(test_descr, gen_link_deps)
+
+        # Print LDFLAGS-* and *-no-z-defs
+        for o in test_descr.objs:
+            dso = test_name + "-" + o + ".so"
+            ldflags = "-Wl,--no-as-needed"
+            if o in test_descr.soname_map:
+                soname = ("$(objpfx)" + test_subdir + "/"
+                          + test_name + "-"
+                          + test_descr.soname_map[o] + ".so")
+                ldflags += (" -Wl,-soname=" + soname)
+            makefile.write("LDFLAGS-%s = %s\n" % (dso, ldflags))
+            if o in test_descr.callrefs:
+                makefile.write("%s-no-z-defs = yes\n" % (dso))
+
+        # Print dependencies for main test program.
+        depstr = ""
+        if '#' in test_descr.deps:
+            for o in test_descr.deps['#']:
+                depstr += (" $(objpfx)" + test_subdir + "/"
+                           + test_name + "-" + o + ".so")
+        if test_descr.main_program_needs_ldl:
+            depstr += " $(libdl)"
+        makefile.write("$(objpfx)%s/%s:%s\n" % (test_subdir, test_name, depstr))
+        ldflags = "-Wl,--no-as-needed"
+        if '#' in test_descr.soname_map:
+            soname = ("$(objpfx)" + test_subdir + "/"
+                      + test_name + "-"
+                      + test_descr.soname_map['#'] + ".so")
+            ldflags += (" -Wl,-soname=" + soname)
+        makefile.write("LDFLAGS-%s = %s\n" % (test_name, ldflags))
+
+        not_depended_objs = find_objs_not_depended_on(test_descr)
+        if not_depended_objs:
+            depstr = ""
+            for dep in not_depended_objs:
+                depstr += (" $(objpfx)" + test_subdir + "/"
+                           + test_name + "-" + dep + ".so")
+            makefile.write("$(objpfx)%s.out:%s\n" % (base_test_name, depstr))
+
+        # Add main executable to test-srcs
+        makefile.write("test-srcs += %s/%s\n" % (test_subdir, test_name))
+        # Add dependency on main executable of test
+        makefile.write("$(objpfx)%s.out: $(objpfx)%s/%s\n"
+                        % (base_test_name, test_subdir, test_name))
+
+        for r in test_descr.expected_outputs.items():
+            tunable_options = []
+            specific_tunable = r[0]
+            xfail = r[1][1]
+            if specific_tunable != "":
+                tunable_options = [specific_tunable]
+            else:
+                tunable_options = default_tunable_options
+                if not tunable_options:
+                    tunable_options = [""]
+
+            for tunable in tunable_options:
+                tunable_env = ""
+                tunable_sfx = ""
+                exp_tunable_sfx = ""
+                if tunable:
+                    tunable_env = "GLIBC_TUNABLES=%s " % tunable
+                    tunable_sfx = "-" + tunable.replace("=","_")
+                if specific_tunable:
+                    tunable_sfx = "-" + specific_tunable.replace("=","_")
+                    exp_tunable_sfx = tunable_sfx
+                tunable_descr = ("(%s)" % tunable_env.strip()
+                                 if tunable_env else "")
+                # Write out fragment of shell script for this single test.
+                test_descr.sh.write \
+                    ("%s${test_wrapper_env} ${run_program_env} \\\n"
+                     "${common_objpfx}support/test-run-command \\\n"
+                     "${common_objpfx}elf/ld.so \\\n"
+                     "--library-path ${common_objpfx}elf/%s:"
+                     "${common_objpfx}elf:${common_objpfx}.:"
+                     "${common_objpfx}dlfcn \\\n"
+                     "${common_objpfx}elf/%s/%s > \\\n"
+                     "  ${common_objpfx}elf/%s/%s%s.output\n"
+                     % (tunable_env ,test_subdir,
+                        test_subdir, test_name, test_subdir, test_name,
+                        tunable_sfx))
+                # Generate a run of each test and compare with expected out
+                test_descr.sh.write \
+                    ("if [ $? -ne 0 ]; then\n"
+                     "  echo '%sFAIL: %s%s execution test'\n"
+                     "  something_failed=true\n"
+                     "else\n"
+                     "  diff -wu ${common_objpfx}elf/%s/%s%s.output \\\n"
+                     "           ${common_objpfx}elf/%s/%s%s.exp\n"
+                     "  if [ $? -ne 0 ]; then\n"
+                     "    echo '%sFAIL: %s%s expected output comparison'\n"
+                     "    something_failed=true\n"
+                     "  fi\n"
+                     "fi\n"
+                     % (("X" if xfail else ""), test_name, tunable_descr,
+                        test_subdir, test_name, tunable_sfx,
+                        test_subdir, base_test_name, exp_tunable_sfx,
+                        ("X" if xfail else ""), test_name, tunable_descr))
+
+        # Generate C files according to dependency and calling relations from
+        # description string.
+        for obj in test_descr.objs:
+            src_name = test_name + "-" + obj + ".c"
+            f = open(testpfx + src_name, "w")
+            if obj in test_descr.callrefs:
+                called_objs = test_descr.callrefs[obj]
+                for callee in called_objs:
+                    f.write("extern void fn_%s (void);\n" % (callee))
+            if len(obj) == 1:
+                f.write("extern int putchar(int);\n")
+                f.write("static void __attribute__((constructor)) " +
+                         "init(void){putchar('%s');putchar('>');}\n" % (obj))
+                f.write("static void __attribute__((destructor)) " +
+                         "fini(void){putchar('<');putchar('%s');}\n" % (obj))
+            else:
+                f.write('extern int printf(const char *, ...);\n')
+                f.write('static void __attribute__((constructor)) ' +
+                         'init(void){printf("%s>");}\n' % (obj))
+                f.write('static void __attribute__((destructor)) ' +
+                         'fini(void){printf("<%s");}\n' % (obj))
+            if obj in test_descr.callrefs:
+                called_objs = test_descr.callrefs[obj]
+                if len(obj) != 1:
+                    f.write("extern int putchar(int);\n")
+                f.write("void fn_%s (void) {\n" % (obj))
+                if len(obj) == 1:
+                    f.write("  putchar ('%s');\n" % (obj));
+                    f.write("  putchar ('(');\n");
+                else:
+                    f.write('  printf ("%s(");\n' % (obj));
+                for callee in called_objs:
+                    f.write("  fn_%s ();\n" % (callee))
+                f.write("  putchar (')');\n");
+                f.write("}\n")
+            else:
+                for callref in test_descr.callrefs.items():
+                    if obj in callref[1]:
+                        if len(obj) == 1:
+                            # We need to declare printf here in this case.
+                            f.write('extern int printf(const char *, ...);\n')
+                        f.write("void fn_%s (void) {\n" % (obj))
+                        f.write('  printf ("%s()");\n' % (obj))
+                        f.write("}\n")
+                        break
+            f.close()
+
+        # Open C file for writing main program
+        f = open(testpfx + test_name + ".c", "w")
+
+        # if there are some operations in main(), it means we need -ldl
+        if test_descr.main_program_needs_ldl:
+            f.write("#include <dlfcn.h>\n")
+        f.write("#include <stdio.h>\n")
+        f.write("#include <stdlib.h>\n")
+        for s in test_descr.main_program:
+            if s[0] == '@':
+                f.write("extern void fn_%s (void);\n" % (s[1:]));
+        f.write("int main (void) {\n")
+        f.write("  putchar('{');\n")
+
+        # Helper routine for generating sanity checking code.
+        def put_fail_check(fail_cond, action_desc):
+            f.write('  if (%s) { printf ("\\n%s failed: %%s\\n", '
+                     'dlerror()); exit (1);}\n' % (fail_cond, action_desc))
+        i = 0
+        while i < len(test_descr.main_program):
+            s = test_descr.main_program[i]
+            obj = s[1:]
+            dso = test_name + "-" + obj
+            if s[0] == '+' or s[0] == '^':
+                if s[0] == '+':
+                    dlopen_flags = "RTLD_LAZY|RTLD_GLOBAL"
+                    f.write("  putchar('+');\n");
+                else:
+                    dlopen_flags = "RTLD_LAZY"
+                    f.write("  putchar(':');\n");
+                if len(obj) == 1:
+                    f.write("  putchar('%s');\n" % (obj));
+                else:
+                    f.write('  printf("%s");\n' % (obj));
+                f.write("  putchar('[');\n");
+                f.write('  void *%s = dlopen ("%s.so", %s);\n'
+                         % (obj, dso, dlopen_flags))
+                put_fail_check("!%s" % (obj),
+                                "%s.so dlopen" % (dso))
+                f.write("  putchar(']');\n");
+            elif s[0] == '-':
+                f.write("  putchar('-');\n");
+                if len(obj) == 1:
+                    f.write("  putchar('%s');\n" % (obj));
+                else:
+                    f.write('  printf("%s");\n' % (obj));
+                f.write("  putchar('[');\n");
+                put_fail_check("dlclose (%s) != 0" % (obj),
+                                "%s.so dlclose" % (dso))
+                f.write("  putchar(']');\n");
+            elif s[0] == '%':
+                f.write("  putchar('%');\n");
+                f.write('  void (*fn_%s)(void) = dlsym (%s, "fn_%s");\n'
+                         % (obj, obj, obj))
+                put_fail_check("!fn_%s" % (obj),
+                                "dlsym(fn_%s) from %s.so" % (obj, dso))
+                f.write("  fn_%s ();\n" % (obj))
+            elif s[0] == '@':
+                f.write("  putchar('@');\n");
+                f.write("  fn_%s ();\n" % (obj))
+            f.write("  putchar(';');\n");
+            i += 1
+        f.write("  putchar('}');\n")
+        f.write("  return 0;\n")
+        f.write("}\n")
+        f.close()
+
+        # --build option processing: build generated sources using 'build_gcc'
+        if cmdlineargs.build:
+            # Helper routine to run a shell command, for running GCC below
+            def run_cmd(args):
+                cmd = str.join(' ', args)
+                if cmdlineargs.debug_output:
+                    print(cmd)
+                p = subprocess.Popen(args)
+                p.wait()
+                if p.returncode != 0:
+                    error("error running command: %s" % (cmd))
+
+            # Compile individual .os files
+            for obj in test_descr.objs:
+                src_name = test_name + "-" + obj + ".c"
+                obj_name = test_name + "-" + obj + ".os"
+                run_cmd([build_gcc, "-c", "-fPIC", testpfx + src_name,
+                          "-o", testpfx + obj_name])
+
+            obj_processed = {}
+            fake_created = {}
+            # Function to create <test_name>-<obj>.so
+            def build_dso(obj):
+                obj_name = test_name + "-" + obj + ".os"
+                dso_name = test_name + "-" + obj + ".so"
+                deps = []
+                if obj in test_descr.deps:
+                    for dep in test_descr.deps[obj]:
+                        if dep in obj_processed:
+                            deps.append(dep)
+                        else:
+                            deps.append(dep + ".FAKE")
+                            if not dep in fake_created:
+                                base_name = testpfx + test_name + "-" + dep
+                                cmd = [build_gcc, "-Wl,--no-as-needed",
+                                       ("-Wl,-soname=" + base_name + ".so"),
+                                       "-shared", base_name + ".FAKE.c",
+                                       "-o", base_name + ".FAKE.so"]
+                                run_cmd(cmd)
+                                fake_created[dep] = True
+                dso_deps = map(lambda d: testpfx + test_name + "-" + d + ".so",
+                               deps)
+                cmd = [build_gcc, "-shared", "-o", testpfx + dso_name,
+                       testpfx + obj_name, "-Wl,--no-as-needed"]
+                if obj in test_descr.soname_map:
+                    soname = ("-Wl,-soname=" + testpfx + test_name + "-"
+                              + test_descr.soname_map[obj] + ".so")
+                    cmd += [soname]
+                cmd += list(dso_deps)
+                run_cmd(cmd)
+                obj_processed[obj] = True
+
+            # Build all DSOs, this needs to be in topological dependency order,
+            # or link will fail
+            dfs(test_descr, build_dso)
+
+            # Build main program
+            deps = []
+            if '#' in test_descr.deps:
+                deps = test_descr.deps['#']
+            main_deps = map(lambda d: testpfx + test_name + "-" + d + ".so",
+                            deps)
+            cmd = [build_gcc, "-Wl,--no-as-needed", "-o", testpfx + test_name,
+                   testpfx + test_name + ".c", "-L%s" % (os.getcwd()),
+                   "-Wl,-rpath-link=%s" % (os.getcwd())]
+            if '#' in test_descr.soname_map:
+                soname = ("-Wl,-soname=" + testpfx + test_name + "-"
+                          + test_descr.soname_map['#'] + ".so")
+                cmd += [soname]
+            cmd += list(main_deps)
+            if test_descr.main_program_needs_ldl:
+                cmd += ["-ldl"]
+            run_cmd(cmd)
+
+    # Check if we need to enumerate permutations of dependencies
+    need_permutation_processing = False
+    if t.dep_permutations:
+        # Adjust dep_permutations into map of object -> dependency permutations
+        for r in t.dep_permutations.items():
+            obj = r[0]
+            if obj in t.deps and len(t.deps[obj]) > 1:
+                deps = t.deps[obj]
+                t.dep_permutations[obj] = list(itertools.permutations (deps))
+                need_permutation_processing = True
+
+    def enum_permutations(t, perm_list):
+        test_subindex = 1
+        curr_perms = []
+        def enum_permutations_rec(t, perm_list):
+            nonlocal test_subindex, curr_perms
+            if len(perm_list) >= 1:
+                curr = perm_list[0]
+                obj = curr[0]
+                perms = curr[1]
+                if not perms:
+                    # This may be an empty list if no multiple dependencies to
+                    # permute were found, skip to next in this case
+                    enum_permutations_rec(t, perm_list[1:])
+                else:
+                    for deps in perms:
+                        t.deps[obj] = deps
+                        permstr = "" if obj == "#" else obj + "_"
+                        permstr += str.join('', deps)
+                        curr_perms.append(permstr)
+                        enum_permutations_rec(t, perm_list[1:])
+                        curr_perms = curr_perms[0:len(curr_perms)-1]
+            else:
+                # t.deps is now instantiated with one dependency order
+                # permutation(across all objects that have multiple
+                # permutations), now process a testcase
+                generate_testcase(t, ("_" + str (test_subindex)
+                                       + "-" + str.join('-', curr_perms)))
+                test_subindex += 1
+        enum_permutations_rec(t, perm_list)
+
+    # Create *.exp files with expected outputs
+    for r in t.expected_outputs.items():
+        sfx = ""
+        if r[0] != "":
+            sfx = "-" + r[0].replace("=","_")
+        f = open(testpfx + t.test_name + sfx + ".exp", "w")
+        (output, xfail) = r[1]
+        f.write('%s' % output)
+        f.close()
+
+    # Create header part of top-level testcase shell script, to wrap execution
+    # and output comparison together.
+    t.sh = open(testpfx + t.test_name + ".sh", "w")
+    t.sh.write("#!/bin/sh\n")
+    t.sh.write("# Test driver for %s, generated by "
+                "dso-ordering-test.py\n" % (t.test_name))
+    t.sh.write("common_objpfx=$1\n")
+    t.sh.write("test_wrapper_env=$2\n")
+    t.sh.write("run_program_env=$3\n")
+    t.sh.write("something_failed=false\n")
+
+    # Starting part of Makefile fragment
+    makefile.write("ifeq (yes,$(build-shared))\n")
+
+    if need_permutation_processing:
+        enum_permutations(t, list (t.dep_permutations.items()))
+    else:
+        # We have no permutations to enumerate, just process testcase normally
+        generate_testcase(t, "")
+
+    # If testcase is XFAIL, indicate so
+    if t.xfail:
+        makefile.write("test-xfail-%s = yes\n" % t.test_name)
+
+    # Output end part of Makefile fragment
+    expected_output_files = ""
+    for r in t.expected_outputs.items():
+        sfx = ""
+        if r[0] != "":
+            sfx = "-" + r[0].replace("=","_")
+        expected_output_files += " $(objpfx)%s/%s%s.exp" % (test_subdir,
+                                                            t.test_name, sfx)
+    makefile.write \
+    ("$(objpfx)%s.out: $(objpfx)%s/%s.sh%s "
+     "$(common-objpfx)support/test-run-command\n"
+     % (t.test_name, test_subdir, t.test_name,
+        expected_output_files))
+    makefile.write("\t$(SHELL) $< $(common-objpfx) '$(test-wrapper-env)' "
+                    "'$(run-program-env)' > $@; $(evaluate-test)\n")
+    makefile.write("ifeq ($(run-built-tests),yes)\n")
+    if t.xtest:
+        makefile.write("xtests-special += $(objpfx)%s.out\n" % (t.test_name))
+    else:
+        makefile.write("tests-special += $(objpfx)%s.out\n" % (t.test_name))
+    makefile.write("endif\n")
+    makefile.write("endif\n")
+
+    # Write ending part of shell script generation
+    t.sh.write("if $something_failed; then\n"
+                "  exit 1\n"
+                "else\n"
+                "  echo '%sPASS: all tests for %s succeeded'\n"
+                "  exit 0\n"
+                "fi\n" % (("X" if t.xfail else ""),
+                          t.test_name))
+    t.sh.close()
+
+# Decription file parsing
+def parse_description_file(filename):
+    global default_tunable_options
+    global current_input_lineno
+    f = open(filename)
+    if not f:
+        error("cannot open description file %s" % (filename))
+    descrfile_lines = f.readlines()
+    t = None
+    for line in descrfile_lines:
+        p = re.compile(r"#.*$")
+        line = p.sub("", line) # Filter out comments
+        line = line.strip() # Remove excess whitespace
+        current_input_lineno += 1
+
+        m = re.match(r"^tunable_option:\s*(.*)$", line)
+        if m:
+            if m.group(1) == "":
+                error("tunable option cannot be empty")
+            default_tunable_options.append(m.group (1))
+            continue
+
+        m = re.match(r"^clear_tunables$", line)
+        if m:
+            default_tunable_options = []
+            continue
+
+        m = re.match(r"^([^:]+):\s*(.*)$", line)
+        if m:
+            lhs = m.group(1)
+            o = re.match(r"^output(.*)$", lhs)
+            xfail = False
+            if not o:
+                o = re.match(r"^xfail_output(.*)$", lhs)
+                if o:
+                    xfail = True;
+            if o:
+                if not t:
+                    error("output specification without testcase description")
+                tsstr = ""
+                if o.group(1):
+                    ts = re.match(r"^\(([a-zA-Z0-9_.=]*)\)$", o.group (1))
+                    if not ts:
+                        error("tunable option malformed '%s'" % o.group(1))
+                    tsstr = ts.group(1)
+                t.expected_outputs[tsstr] = (m.group(2), xfail)
+                # Any tunable option XFAILed means entire testcase
+                # is XFAIL/XPASS
+                t.xfail |= xfail
+            else:
+                if t:
+                    # Starting a new test description, end and process
+                    # current one.
+                    process_testcase(t)
+                t = TestDescr()
+                x = re.match(r"^xtest\((.*)\)$", lhs)
+                if x:
+                    t.xtest = True
+                    t.test_name = x.group(1)
+                else:
+                    t.test_name = lhs
+                descr_string = m.group(2)
+                parse_description_string(t, descr_string)
+            continue
+        else:
+            if line:
+                if not t:
+                    error("no active testcase description")
+                parse_description_string(t, line)
+    # Process last completed test description
+    if t:
+        process_testcase(t)
+
+# Setup Makefile output to file or stdout as selected
+if output_makefile:
+    output_makefile_dir = os.path.dirname(output_makefile)
+    if output_makefile_dir:
+        os.makedirs(output_makefile_dir, exist_ok = True)
+    makefile = open(output_makefile, "w")
+else:
+    makefile = open(sys.stdout.fileno (), "w")
+
+# Finally, the main top-level calling of above parsing routines.
+if description_file:
+    parse_description_file(description_file)
+else:
+    t = TestDescr()
+    t.test_name = test_name
+    parse_description_string(t, description)
+    process_testcase(t)
+
+# Close Makefile fragment output
+makefile.close()
diff --git a/support/Depend b/support/Depend
new file mode 100644
index 0000000000..7e7d5dc67c
--- /dev/null
+++ b/support/Depend
@@ -0,0 +1 @@ 
+elf
diff --git a/support/Makefile b/support/Makefile
index a462781718..0da604ade8 100644
--- a/support/Makefile
+++ b/support/Makefile
@@ -252,10 +252,16 @@  others-noinstall += shell-container echo-container true-container
 others += $(LINKS_DSO_PROGRAM)
 others-noinstall += $(LINKS_DSO_PROGRAM)
 
+others += test-run-command
+others-static += test-run-command
+others-noinstall += test-run-command
+LDLIBS-test-run-command = $(libsupport)
+
 $(objpfx)test-container : $(libsupport)
 $(objpfx)shell-container : $(libsupport)
 $(objpfx)echo-container : $(libsupport)
 $(objpfx)true-container : $(libsupport)
+$(objpfx)test-run-command : $(libsupport) $(common-objpfx)elf/static-stubs.o
 
 tests = \
   README-testing \
diff --git a/support/support_test_main.c b/support/support_test_main.c
index 07e3cdd173..66a754b84f 100644
--- a/support/support_test_main.c
+++ b/support/support_test_main.c
@@ -228,6 +228,18 @@  run_test_function (int argc, char **argv, const struct test_config *config)
   while (wait_for_debugger)
     usleep (1000);
 
+  if (config->run_command_mode)
+    {
+      /* In run-command-mode, the child process executes the command line
+	 arguments as a new program.  */
+      char **argv_ = xmalloc (sizeof (char *) * argc);
+      memcpy (argv_, &argv[1], sizeof (char *) * (argc - 1));
+      argv_[argc - 1] = NULL;
+      execv (argv_[0], argv_);
+      printf ("error: should not return here\n");
+      exit (1);
+    }
+
   if (config->test_function != NULL)
     return config->test_function ();
   else if (config->test_function_argv != NULL)
diff --git a/support/test-driver.c b/support/test-driver.c
index b0bea46dee..1552f62c9b 100644
--- a/support/test-driver.c
+++ b/support/test-driver.c
@@ -116,7 +116,9 @@  main (int argc, char **argv)
 #if defined (TEST_FUNCTION) && defined (TEST_FUNCTON_ARGV)
 # error TEST_FUNCTION and TEST_FUNCTION_ARGV cannot be defined at the same time
 #endif
-#if defined (TEST_FUNCTION)
+#ifdef RUN_COMMAND_MODE
+  test_config.run_command_mode = 1;
+#elif defined (TEST_FUNCTION)
   test_config.test_function = TEST_FUNCTION;
 #elif defined (TEST_FUNCTION_ARGV)
   test_config.test_function_argv = TEST_FUNCTION_ARGV;
diff --git a/support/test-driver.h b/support/test-driver.h
index 8d4f38275d..b44c0ff033 100644
--- a/support/test-driver.h
+++ b/support/test-driver.h
@@ -36,6 +36,7 @@  struct test_config
   int expected_signal;   /* If non-zero, expect termination by signal.  */
   char no_mallopt;       /* Boolean flag to disable mallopt.  */
   char no_setvbuf;       /* Boolean flag to disable setvbuf.  */
+  char run_command_mode; /* Boolean flag to indicate run-command-mode.  */
   const char *optstring; /* Short command line options.  */
 };
 
diff --git a/support/test-run-command.c b/support/test-run-command.c
new file mode 100644
index 0000000000..61560d7bfb
--- /dev/null
+++ b/support/test-run-command.c
@@ -0,0 +1,22 @@ 
+/* Main program for test-run-command support utility.
+   Copyright (C) 2021 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <https://www.gnu.org/licenses/>.  */
+
+/* This is basically a configuration of test-driver.c into a general
+   command-line program runner.  */
+#define RUN_COMMAND_MODE
+#include <test-driver.c>