Message ID | 20210620085639.143694-1-mans0n@gorani.run |
---|---|
State | Superseded |
Delegated to: | Ambarus Tudor |
Headers | show |
Series | mtd: spi-nor: esmt: Use correct name of f25l32qa | expand |
Am 2021-06-20 10:56, schrieb Sungbo Eo: > The flash ID of F25L32QA is 0x8c4016, whereas that of F25L32QA(2S) is > 0x8c4116. F25L32QA(2S) is the newer version of F25L32QA and its BPn > bits > are non-volatile, unlike its older version. > > References: > https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F25L32QA.pdf > References: > https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F25L32QA_1(2S).pdf "Datasheet:" please > Signed-off-by: Sungbo Eo <mans0n@gorani.run> > --- > At first I was going to send a new support patch of F25L16PA(2S), > but before that, I wanted to make sure if "(2s)" suffix is okay or > unnecessary. > --- > drivers/mtd/spi-nor/esmt.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/mtd/spi-nor/esmt.c b/drivers/mtd/spi-nor/esmt.c > index cfc9218c1053..51b3ff764ef6 100644 > --- a/drivers/mtd/spi-nor/esmt.c > +++ b/drivers/mtd/spi-nor/esmt.c > @@ -12,8 +12,8 @@ static const struct flash_info esmt_parts[] = { > /* ESMT */ > { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, > SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) }, > - { "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64, > - SECT_4K | SPI_NOR_HAS_LOCK) }, > + { "f25l32qa(2s)", INFO(0x8c4116, 0, 64 * 1024, 64, > + SECT_4K | SPI_NOR_HAS_LOCK) }, > { "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128, > SECT_4K | SPI_NOR_HAS_LOCK) }, > }; Tudor has decide on that name - or the use of parentheses. I don't have a strong opinion on it. FWIW, Reviewed-by: Michael Walle <michael@walle.cc> -michael
On 2021-07-17 01:11, Michael Walle wrote: > Am 2021-06-20 10:56, schrieb Sungbo Eo: >> The flash ID of F25L32QA is 0x8c4016, whereas that of F25L32QA(2S) is >> 0x8c4116. F25L32QA(2S) is the newer version of F25L32QA and its BPn bits >> are non-volatile, unlike its older version. >> >> References: >> https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F25L32QA.pdf >> References: >> https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F25L32QA_1(2S).pdf > > "Datasheet:" please > >> Signed-off-by: Sungbo Eo <mans0n@gorani.run> >> --- >> At first I was going to send a new support patch of F25L16PA(2S), >> but before that, I wanted to make sure if "(2s)" suffix is okay or >> unnecessary. >> --- >> drivers/mtd/spi-nor/esmt.c | 4 ++-- >> 1 file changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/mtd/spi-nor/esmt.c b/drivers/mtd/spi-nor/esmt.c >> index cfc9218c1053..51b3ff764ef6 100644 >> --- a/drivers/mtd/spi-nor/esmt.c >> +++ b/drivers/mtd/spi-nor/esmt.c >> @@ -12,8 +12,8 @@ static const struct flash_info esmt_parts[] = { >> /* ESMT */ >> { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, >> SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) }, >> - { "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64, >> - SECT_4K | SPI_NOR_HAS_LOCK) }, >> + { "f25l32qa(2s)", INFO(0x8c4116, 0, 64 * 1024, 64, >> + SECT_4K | SPI_NOR_HAS_LOCK) }, >> { "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128, >> SECT_4K | SPI_NOR_HAS_LOCK) }, >> }; > > Tudor has decide on that name - or the use of parentheses. I don't have a > strong opinion on it. I'm concerned that any other devices do not contain parentheses in their model names... I'm fine with "f25l32qa-2s" if preferred. > > FWIW, > Reviewed-by: Michael Walle <michael@walle.cc> Thanks for your review! > > -michael
Hi, Am 2021-07-19 17:19, schrieb Sungbo Eo: > On 2021-07-17 01:11, Michael Walle wrote: >> Am 2021-06-20 10:56, schrieb Sungbo Eo: >>> The flash ID of F25L32QA is 0x8c4016, whereas that of F25L32QA(2S) is >>> 0x8c4116. F25L32QA(2S) is the newer version of F25L32QA and its BPn >>> bits >>> are non-volatile, unlike its older version. >>> >>> References: >>> https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F25L32QA.pdf >>> References: >>> https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F25L32QA_1(2S).pdf >> >> "Datasheet:" please >> >>> Signed-off-by: Sungbo Eo <mans0n@gorani.run> >>> --- >>> At first I was going to send a new support patch of F25L16PA(2S), >>> but before that, I wanted to make sure if "(2s)" suffix is okay or >>> unnecessary. >>> --- >>> drivers/mtd/spi-nor/esmt.c | 4 ++-- >>> 1 file changed, 2 insertions(+), 2 deletions(-) >>> >>> diff --git a/drivers/mtd/spi-nor/esmt.c b/drivers/mtd/spi-nor/esmt.c >>> index cfc9218c1053..51b3ff764ef6 100644 >>> --- a/drivers/mtd/spi-nor/esmt.c >>> +++ b/drivers/mtd/spi-nor/esmt.c >>> @@ -12,8 +12,8 @@ static const struct flash_info esmt_parts[] = { >>> /* ESMT */ >>> { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, >>> SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) >>> }, >>> - { "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64, >>> - SECT_4K | SPI_NOR_HAS_LOCK) }, >>> + { "f25l32qa(2s)", INFO(0x8c4116, 0, 64 * 1024, 64, >>> + SECT_4K | SPI_NOR_HAS_LOCK) }, >>> { "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128, >>> SECT_4K | SPI_NOR_HAS_LOCK) }, >>> }; >> >> Tudor has decide on that name - or the use of parentheses. I don't >> have a >> strong opinion on it. > > I'm concerned that any other devices do not contain parentheses in > their model names... I'm fine with "f25l32qa-2s" if preferred. Having another look at the datasheet there are different product IDs: F25L32QA-50PG2S, F25L32QA-86PG2S, .. where you can also find the "-2s". Thus I'd actually prefer "f25l32qa-2s". -michael
On 2021-07-21 16:32, Michael Walle wrote: > Hi, > > Am 2021-07-19 17:19, schrieb Sungbo Eo: >> On 2021-07-17 01:11, Michael Walle wrote: >>> Am 2021-06-20 10:56, schrieb Sungbo Eo: >>>> The flash ID of F25L32QA is 0x8c4016, whereas that of F25L32QA(2S) is >>>> 0x8c4116. F25L32QA(2S) is the newer version of F25L32QA and its BPn >>>> bits >>>> are non-volatile, unlike its older version. >>>> >>>> References: >>>> https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F25L32QA.pdf >>>> References: >>>> https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F25L32QA_1(2S).pdf >>> >>> "Datasheet:" please >>> >>>> Signed-off-by: Sungbo Eo <mans0n@gorani.run> >>>> --- >>>> At first I was going to send a new support patch of F25L16PA(2S), >>>> but before that, I wanted to make sure if "(2s)" suffix is okay or >>>> unnecessary. >>>> --- >>>> drivers/mtd/spi-nor/esmt.c | 4 ++-- >>>> 1 file changed, 2 insertions(+), 2 deletions(-) >>>> >>>> diff --git a/drivers/mtd/spi-nor/esmt.c b/drivers/mtd/spi-nor/esmt.c >>>> index cfc9218c1053..51b3ff764ef6 100644 >>>> --- a/drivers/mtd/spi-nor/esmt.c >>>> +++ b/drivers/mtd/spi-nor/esmt.c >>>> @@ -12,8 +12,8 @@ static const struct flash_info esmt_parts[] = { >>>> /* ESMT */ >>>> { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, >>>> SECT_4K | SPI_NOR_HAS_LOCK | >>>> SPI_NOR_SWP_IS_VOLATILE) }, >>>> - { "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64, >>>> - SECT_4K | SPI_NOR_HAS_LOCK) }, >>>> + { "f25l32qa(2s)", INFO(0x8c4116, 0, 64 * 1024, 64, >>>> + SECT_4K | SPI_NOR_HAS_LOCK) }, >>>> { "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128, >>>> SECT_4K | SPI_NOR_HAS_LOCK) }, >>>> }; >>> >>> Tudor has decide on that name - or the use of parentheses. I don't >>> have a >>> strong opinion on it. >> >> I'm concerned that any other devices do not contain parentheses in >> their model names... I'm fine with "f25l32qa-2s" if preferred. > > Having another look at the datasheet there are different product > IDs: F25L32QA-50PG2S, F25L32QA-86PG2S, .. where you can also find > the "-2s". > > Thus I'd actually prefer "f25l32qa-2s". Oh, you're right. So the "2S" suffix was a indicator for a class of devices, not for a single device... I didn't even notice there was a product ID table. xD I'll follow your suggestion. Thanks! > > -michael
diff --git a/drivers/mtd/spi-nor/esmt.c b/drivers/mtd/spi-nor/esmt.c index cfc9218c1053..51b3ff764ef6 100644 --- a/drivers/mtd/spi-nor/esmt.c +++ b/drivers/mtd/spi-nor/esmt.c @@ -12,8 +12,8 @@ static const struct flash_info esmt_parts[] = { /* ESMT */ { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE) }, - { "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64, - SECT_4K | SPI_NOR_HAS_LOCK) }, + { "f25l32qa(2s)", INFO(0x8c4116, 0, 64 * 1024, 64, + SECT_4K | SPI_NOR_HAS_LOCK) }, { "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_HAS_LOCK) }, };
The flash ID of F25L32QA is 0x8c4016, whereas that of F25L32QA(2S) is 0x8c4116. F25L32QA(2S) is the newer version of F25L32QA and its BPn bits are non-volatile, unlike its older version. References: https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F25L32QA.pdf References: https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F25L32QA_1(2S).pdf Signed-off-by: Sungbo Eo <mans0n@gorani.run> --- At first I was going to send a new support patch of F25L16PA(2S), but before that, I wanted to make sure if "(2s)" suffix is okay or unnecessary. --- drivers/mtd/spi-nor/esmt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)