| Message ID | 20210624182939.12881-4-anand.ashok.dumbre@xilinx.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | Add Xilinx AMS Driver | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/dt-meta-schema | success | |
| robh/dtbs-check | success |
On Thu, 24 Jun 2021 19:29:38 +0100 Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com> wrote: > Xilinx AMS have several ADC channels that can be used for measurement of > different voltages and temperatures. Document the same in the bindings. > > Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com> Definitely some fiddly bits in here, but it looks fine to me. It's odd enough that I'll be relying on Rob taking a look though :) > --- > .../bindings/iio/adc/xlnx,zynqmp-ams.yaml | 228 ++++++++++++++++++ > 1 file changed, 228 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml > > diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml > new file mode 100644 > index 000000000000..a065ddd55d38 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml > @@ -0,0 +1,228 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/adc/xlnx,zynqmp-ams.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Xilinx Zynq Ultrascale AMS controller > + > +maintainers: > + - Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com> > + > +description: | > + The AMS (Analog Monitoring System) includes an ADC as well as on-chip sensors > + that can be used to sample external voltages and monitor on-die operating > + conditions, such as temperature and supply voltage levels. > + The AMS has two SYSMON blocks which are PL (Programmable Logic) SYSMON and > + PS (Processing System) SYSMON. > + All designs should have AMS registers, but PS and PL are optional. The > + AMS controller can work with only PS, only PL and both PS and PL > + configurations. Please specify registers according to your design. Devicetree > + should always have AMS module property. Providing PS & PL module is optional. > + > + AMS Channel Details > + ``````````````````` > + Sysmon Block |Channel| Details |Measurement > + |Number | |Type > + --------------------------------------------------------------------------------------------------------- > + AMS CTRL |0 |System PLLs voltage measurement, VCC_PSPLL. |Voltage > + |1 |Battery voltage measurement, VCC_PSBATT. |Voltage > + |2 |PL Internal voltage measurement, VCCINT. |Voltage > + |3 |Block RAM voltage measurement, VCCBRAM. |Voltage > + |4 |PL Aux voltage measurement, VCCAUX. |Voltage > + |5 |Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL. |Voltage > + |6 |VCC_PSINTFP_DDR voltage measurement. |Voltage > + --------------------------------------------------------------------------------------------------------- > + PS Sysmon |7 |LPD temperature measurement. |Temperature > + |8 |FPD temperature measurement (REMOTE). |Temperature > + |9 |VCC PS LPD voltage measurement (supply1). |Voltage > + |10 |VCC PS FPD voltage measurement (supply2). |Voltage > + |11 |PS Aux voltage reference (supply3). |Voltage > + |12 |DDR I/O VCC voltage measurement. |Voltage > + |13 |PS IO Bank 503 voltage measurement (supply5). |Voltage > + |14 |PS IO Bank 500 voltage measurement (supply6). |Voltage > + |15 |VCCO_PSIO1 voltage measurement. |Voltage > + |16 |VCCO_PSIO2 voltage measurement. |Voltage > + |17 |VCC_PS_GTR voltage measurement (VPS_MGTRAVCC). |Voltage > + |18 |VTT_PS_GTR voltage measurement (VPS_MGTRAVTT). |Voltage > + |19 |VCC_PSADC voltage measurement. |Voltage > + --------------------------------------------------------------------------------------------------------- > + PL Sysmon |20 |PL temperature measurement. |Temperature > + |21 |PL Internal voltage measurement, VCCINT. |Voltage > + |22 |PL Auxiliary voltage measurement, VCCAUX. |Voltage > + |23 |ADC Reference P+ voltage measurement. |Voltage > + |24 |ADC Reference N- voltage measurement. |Voltage > + |25 |PL Block RAM voltage measurement, VCCBRAM. |Voltage > + |26 |LPD Internal voltage measurement, VCC_PSINTLP (supply4). |Voltage > + |27 |FPD Internal voltage measurement, VCC_PSINTFP (supply5). |Voltage > + |28 |PS Auxiliary voltage measurement (supply6). |Voltage > + |29 |PL VCCADC voltage measurement (vccams). |Voltage > + |30 |Differential analog input signal voltage measurment. |Voltage > + |31 |VUser0 voltage measurement (supply7). |Voltage > + |32 |VUser1 voltage measurement (supply8). |Voltage > + |33 |VUser2 voltage measurement (supply9). |Voltage > + |34 |VUser3 voltage measurement (supply10). |Voltage > + |35 |Auxiliary ch 0 voltage measurement (VAux0). |Voltage > + |36 |Auxiliary ch 1 voltage measurement (VAux1). |Voltage > + |37 |Auxiliary ch 2 voltage measurement (VAux2). |Voltage > + |38 |Auxiliary ch 3 voltage measurement (VAux3). |Voltage > + |39 |Auxiliary ch 4 voltage measurement (VAux4). |Voltage > + |40 |Auxiliary ch 5 voltage measurement (VAux5). |Voltage > + |41 |Auxiliary ch 6 voltage measurement (VAux6). |Voltage > + |42 |Auxiliary ch 7 voltage measurement (VAux7). |Voltage > + |43 |Auxiliary ch 8 voltage measurement (VAux8). |Voltage > + |44 |Auxiliary ch 9 voltage measurement (VAux9). |Voltage > + |45 |Auxiliary ch 10 voltage measurement (VAux10). |Voltage > + |46 |Auxiliary ch 11 voltage measurement (VAux11). |Voltage > + |47 |Auxiliary ch 12 voltage measurement (VAux12). |Voltage > + |48 |Auxiliary ch 13 voltage measurement (VAux13). |Voltage > + |49 |Auxiliary ch 14 voltage measurement (VAux14). |Voltage > + |50 |Auxiliary ch 15 voltage measurement (VAux15). |Voltage > + -------------------------------------------------------------------------------------------------------- > + > +properties: > + compatible: > + enum: > + - xlnx,zynqmp-ams > + > + interrupts: > + maxItems: 1 > + > + reg: > + description: AMS Controller register space > + maxItems: 1 > + > + ranges: > + description: > + Maps the child address space for PS and/or PL. > + maxItems: 1 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 1 > + > + '#io-channel-cells': > + const: 1 > + > +patternProperties: > + "^ams-ps@0,400$": > + type: object > + description: | > + PS (Processing System) SYSMON is memory mapped to PS. This block has > + built-in alarm generation logic that is used to interrupt the processor > + based on condition set. > + > + properties: > + compatible: > + enum: > + - xlnx,zynqmp-ams-ps > + > + reg: > + description: Register Space for PS-SYSMON > + maxItems: 1 > + > + required: > + - compatible > + - reg > + > + additionalProperties: false > + > + "^ams-pl@400,400$": > + type: object > + description: > + PL-SYSMON is capable of monitoring off chip voltage and temperature. > + PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring > + from external master. Out of this interface currently only DRP is > + supported. This block has alarm generation logic that is used to > + interrupt the processor based on condition set. > + > + properties: > + compatible: > + items: > + - enum: > + - xlnx,zynqmp-ams-pl > + > + reg: > + description: Register Space for PL-SYSMON. > + maxItems: 1 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + patternProperties: > + "^channel@([2-4][0-9]|50)$": > + type: object > + description: > + Describes the external channels connected. > + > + properties: > + reg: > + description: > + Pair of pins the channel is connected to. This value is > + same as Channel Number for a particular channel. > + minimum: 20 > + maximum: 50 > + > + xlnx,bipolar: > + $ref: /schemas/types.yaml#/definitions/flag > + type: boolean > + description: > + If the set channel is used in bipolar mode. > + > + required: > + - reg > + > + additionalProperties: false > + > +required: > + - compatible > + - reg > + - ranges > + > +additionalProperties: false > + > +examples: > + - | > + bus { > + #address-cells = <2>; > + #size-cells = <2>; > + > + xilinx_ams: ams@ffa50000 { > + compatible = "xlnx,zynqmp-ams"; > + interrupt-parent = <&gic>; > + interrupts = <0 56 4>; > + reg = <0x0 0xffa50000 0x0 0x800>; > + #address-cells = <1>; > + #size-cells = <1>; > + #io-channel-cells = <1>; > + ranges = <0 0 0xffa50800 0x800>; > + > + ams_ps: ams-ps@0,400 { > + compatible = "xlnx,zynqmp-ams-ps"; > + reg = <0 0x400>; > + }; > + > + ams_pl: ams-pl@400,400 { > + compatible = "xlnx,zynqmp-ams-pl"; > + reg = <0x400 0x400>; > + #address-cells = <1>; > + #size-cells = <0>; > + channel@30 { > + reg = <30>; > + xlnx,bipolar; > + }; > + channel@31 { > + reg = <31>; > + }; > + channel@38 { > + reg = <38>; > + xlnx,bipolar; > + }; > + }; > + }; > + };
On Thu, Jun 24, 2021 at 07:29:38PM +0100, Anand Ashok Dumbre wrote: > Xilinx AMS have several ADC channels that can be used for measurement of > different voltages and temperatures. Document the same in the bindings. > > Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com> > --- > .../bindings/iio/adc/xlnx,zynqmp-ams.yaml | 228 ++++++++++++++++++ > 1 file changed, 228 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml > > diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml > new file mode 100644 > index 000000000000..a065ddd55d38 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml > @@ -0,0 +1,228 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/adc/xlnx,zynqmp-ams.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Xilinx Zynq Ultrascale AMS controller > + > +maintainers: > + - Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com> > + > +description: | > + The AMS (Analog Monitoring System) includes an ADC as well as on-chip sensors > + that can be used to sample external voltages and monitor on-die operating > + conditions, such as temperature and supply voltage levels. > + The AMS has two SYSMON blocks which are PL (Programmable Logic) SYSMON and > + PS (Processing System) SYSMON. > + All designs should have AMS registers, but PS and PL are optional. The > + AMS controller can work with only PS, only PL and both PS and PL > + configurations. Please specify registers according to your design. Devicetree > + should always have AMS module property. Providing PS & PL module is optional. > + > + AMS Channel Details > + ``````````````````` > + Sysmon Block |Channel| Details |Measurement > + |Number | |Type > + --------------------------------------------------------------------------------------------------------- > + AMS CTRL |0 |System PLLs voltage measurement, VCC_PSPLL. |Voltage > + |1 |Battery voltage measurement, VCC_PSBATT. |Voltage > + |2 |PL Internal voltage measurement, VCCINT. |Voltage > + |3 |Block RAM voltage measurement, VCCBRAM. |Voltage > + |4 |PL Aux voltage measurement, VCCAUX. |Voltage > + |5 |Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL. |Voltage > + |6 |VCC_PSINTFP_DDR voltage measurement. |Voltage > + --------------------------------------------------------------------------------------------------------- > + PS Sysmon |7 |LPD temperature measurement. |Temperature > + |8 |FPD temperature measurement (REMOTE). |Temperature > + |9 |VCC PS LPD voltage measurement (supply1). |Voltage > + |10 |VCC PS FPD voltage measurement (supply2). |Voltage > + |11 |PS Aux voltage reference (supply3). |Voltage > + |12 |DDR I/O VCC voltage measurement. |Voltage > + |13 |PS IO Bank 503 voltage measurement (supply5). |Voltage > + |14 |PS IO Bank 500 voltage measurement (supply6). |Voltage > + |15 |VCCO_PSIO1 voltage measurement. |Voltage > + |16 |VCCO_PSIO2 voltage measurement. |Voltage > + |17 |VCC_PS_GTR voltage measurement (VPS_MGTRAVCC). |Voltage > + |18 |VTT_PS_GTR voltage measurement (VPS_MGTRAVTT). |Voltage > + |19 |VCC_PSADC voltage measurement. |Voltage > + --------------------------------------------------------------------------------------------------------- > + PL Sysmon |20 |PL temperature measurement. |Temperature > + |21 |PL Internal voltage measurement, VCCINT. |Voltage > + |22 |PL Auxiliary voltage measurement, VCCAUX. |Voltage > + |23 |ADC Reference P+ voltage measurement. |Voltage > + |24 |ADC Reference N- voltage measurement. |Voltage > + |25 |PL Block RAM voltage measurement, VCCBRAM. |Voltage > + |26 |LPD Internal voltage measurement, VCC_PSINTLP (supply4). |Voltage > + |27 |FPD Internal voltage measurement, VCC_PSINTFP (supply5). |Voltage > + |28 |PS Auxiliary voltage measurement (supply6). |Voltage > + |29 |PL VCCADC voltage measurement (vccams). |Voltage > + |30 |Differential analog input signal voltage measurment. |Voltage > + |31 |VUser0 voltage measurement (supply7). |Voltage > + |32 |VUser1 voltage measurement (supply8). |Voltage > + |33 |VUser2 voltage measurement (supply9). |Voltage > + |34 |VUser3 voltage measurement (supply10). |Voltage > + |35 |Auxiliary ch 0 voltage measurement (VAux0). |Voltage > + |36 |Auxiliary ch 1 voltage measurement (VAux1). |Voltage > + |37 |Auxiliary ch 2 voltage measurement (VAux2). |Voltage > + |38 |Auxiliary ch 3 voltage measurement (VAux3). |Voltage > + |39 |Auxiliary ch 4 voltage measurement (VAux4). |Voltage > + |40 |Auxiliary ch 5 voltage measurement (VAux5). |Voltage > + |41 |Auxiliary ch 6 voltage measurement (VAux6). |Voltage > + |42 |Auxiliary ch 7 voltage measurement (VAux7). |Voltage > + |43 |Auxiliary ch 8 voltage measurement (VAux8). |Voltage > + |44 |Auxiliary ch 9 voltage measurement (VAux9). |Voltage > + |45 |Auxiliary ch 10 voltage measurement (VAux10). |Voltage > + |46 |Auxiliary ch 11 voltage measurement (VAux11). |Voltage > + |47 |Auxiliary ch 12 voltage measurement (VAux12). |Voltage > + |48 |Auxiliary ch 13 voltage measurement (VAux13). |Voltage > + |49 |Auxiliary ch 14 voltage measurement (VAux14). |Voltage > + |50 |Auxiliary ch 15 voltage measurement (VAux15). |Voltage > + -------------------------------------------------------------------------------------------------------- > + > +properties: > + compatible: > + enum: > + - xlnx,zynqmp-ams > + > + interrupts: > + maxItems: 1 > + > + reg: > + description: AMS Controller register space > + maxItems: 1 > + > + ranges: > + description: > + Maps the child address space for PS and/or PL. > + maxItems: 1 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 1 > + > + '#io-channel-cells': > + const: 1 > + > +patternProperties: > + "^ams-ps@0,400$": If your going to hardcode the unit-address, then it's a fixed string and should be under 'properties' instead. The unit-address is also wrong. This is memory-mapped ranges, right? If so, this should just be '0' and the next one '400'. > + type: object > + description: | > + PS (Processing System) SYSMON is memory mapped to PS. This block has > + built-in alarm generation logic that is used to interrupt the processor > + based on condition set. > + > + properties: > + compatible: > + enum: > + - xlnx,zynqmp-ams-ps > + > + reg: > + description: Register Space for PS-SYSMON > + maxItems: 1 > + > + required: > + - compatible > + - reg > + > + additionalProperties: false > + > + "^ams-pl@400,400$": > + type: object > + description: > + PL-SYSMON is capable of monitoring off chip voltage and temperature. > + PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring > + from external master. Out of this interface currently only DRP is > + supported. This block has alarm generation logic that is used to > + interrupt the processor based on condition set. > + > + properties: > + compatible: > + items: > + - enum: > + - xlnx,zynqmp-ams-pl > + > + reg: > + description: Register Space for PL-SYSMON. > + maxItems: 1 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + patternProperties: > + "^channel@([2-4][0-9]|50)$": > + type: object > + description: > + Describes the external channels connected. > + > + properties: > + reg: > + description: > + Pair of pins the channel is connected to. This value is > + same as Channel Number for a particular channel. > + minimum: 20 > + maximum: 50 > + > + xlnx,bipolar: Don't we have a common property for this now? > + $ref: /schemas/types.yaml#/definitions/flag > + type: boolean > + description: > + If the set channel is used in bipolar mode. > + > + required: > + - reg > + > + additionalProperties: false > + > +required: > + - compatible > + - reg > + - ranges > + > +additionalProperties: false > + > +examples: > + - | > + bus { > + #address-cells = <2>; > + #size-cells = <2>; > + > + xilinx_ams: ams@ffa50000 { > + compatible = "xlnx,zynqmp-ams"; > + interrupt-parent = <&gic>; > + interrupts = <0 56 4>; > + reg = <0x0 0xffa50000 0x0 0x800>; > + #address-cells = <1>; > + #size-cells = <1>; > + #io-channel-cells = <1>; > + ranges = <0 0 0xffa50800 0x800>; > + > + ams_ps: ams-ps@0,400 { > + compatible = "xlnx,zynqmp-ams-ps"; > + reg = <0 0x400>; > + }; > + > + ams_pl: ams-pl@400,400 { > + compatible = "xlnx,zynqmp-ams-pl"; > + reg = <0x400 0x400>; > + #address-cells = <1>; > + #size-cells = <0>; > + channel@30 { > + reg = <30>; > + xlnx,bipolar; > + }; > + channel@31 { > + reg = <31>; > + }; > + channel@38 { > + reg = <38>; > + xlnx,bipolar; > + }; > + }; > + }; > + }; > -- > 2.17.1 > >
Hi Rob, Thank you for reviewing the patch. My responses in line. > -----Original Message----- > From: Rob Herring <robh@kernel.org> > Sent: Tuesday 13 July 2021 11:31 PM > To: Anand Ashok Dumbre <ANANDASH@xilinx.com> > Cc: jic23@kernel.org; lars@metafoo.de; linux-iio@vger.kernel.org; git-dev > <git-dev@xilinx.com>; Michal Simek <michals@xilinx.com>; > pmeerw@pmeerw.net; devicetree@vger.kernel.org; linux- > kernel@vger.kernel.org > Subject: Re: [PATCH v6 3/4] dt-bindings: iio: adc: Add Xilinx AMS binding > documentation > > On Thu, Jun 24, 2021 at 07:29:38PM +0100, Anand Ashok Dumbre wrote: > > Xilinx AMS have several ADC channels that can be used for measurement > > of different voltages and temperatures. Document the same in the > bindings. > > > > Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com> > > --- > > .../bindings/iio/adc/xlnx,zynqmp-ams.yaml | 228 ++++++++++++++++++ > > 1 file changed, 228 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml > > > > diff --git > > a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml > > b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml > > new file mode 100644 > > index 000000000000..a065ddd55d38 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml > > @@ -0,0 +1,228 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/iio/adc/xlnx,zynqmp-ams.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Xilinx Zynq Ultrascale AMS controller > > + > > +maintainers: > > + - Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com> > > + > > +description: | > > + The AMS (Analog Monitoring System) includes an ADC as well as > > +on-chip sensors > > + that can be used to sample external voltages and monitor on-die > > +operating > > + conditions, such as temperature and supply voltage levels. > > + The AMS has two SYSMON blocks which are PL (Programmable Logic) > > +SYSMON and > > + PS (Processing System) SYSMON. > > + All designs should have AMS registers, but PS and PL are optional. > > +The > > + AMS controller can work with only PS, only PL and both PS and PL > > + configurations. Please specify registers according to your design. > > +Devicetree > > + should always have AMS module property. Providing PS & PL module is > optional. > > + > > + AMS Channel Details > > + ``````````````````` > > + Sysmon Block |Channel| Details > |Measurement > > + |Number | |Type > > + ----------------------------------------------------------------------------------------- > ---------------- > > + AMS CTRL |0 |System PLLs voltage measurement, VCC_PSPLL. > |Voltage > > + |1 |Battery voltage measurement, VCC_PSBATT. > |Voltage > > + |2 |PL Internal voltage measurement, VCCINT. > |Voltage > > + |3 |Block RAM voltage measurement, VCCBRAM. > |Voltage > > + |4 |PL Aux voltage measurement, VCCAUX. > |Voltage > > + |5 |Voltage measurement for six DDR I/O PLLs, > VCC_PSDDR_PLL. |Voltage > > + |6 |VCC_PSINTFP_DDR voltage measurement. > |Voltage > > + ----------------------------------------------------------------------------------------- > ---------------- > > + PS Sysmon |7 |LPD temperature measurement. > |Temperature > > + |8 |FPD temperature measurement (REMOTE). > |Temperature > > + |9 |VCC PS LPD voltage measurement (supply1). > |Voltage > > + |10 |VCC PS FPD voltage measurement (supply2). > |Voltage > > + |11 |PS Aux voltage reference (supply3). |Voltage > > + |12 |DDR I/O VCC voltage measurement. > |Voltage > > + |13 |PS IO Bank 503 voltage measurement (supply5). > |Voltage > > + |14 |PS IO Bank 500 voltage measurement (supply6). > |Voltage > > + |15 |VCCO_PSIO1 voltage measurement. > |Voltage > > + |16 |VCCO_PSIO2 voltage measurement. > |Voltage > > + |17 |VCC_PS_GTR voltage measurement (VPS_MGTRAVCC). > |Voltage > > + |18 |VTT_PS_GTR voltage measurement (VPS_MGTRAVTT). > |Voltage > > + |19 |VCC_PSADC voltage measurement. > |Voltage > > + ----------------------------------------------------------------------------------------- > ---------------- > > + PL Sysmon |20 |PL temperature measurement. > |Temperature > > + |21 |PL Internal voltage measurement, VCCINT. > |Voltage > > + |22 |PL Auxiliary voltage measurement, VCCAUX. > |Voltage > > + |23 |ADC Reference P+ voltage measurement. > |Voltage > > + |24 |ADC Reference N- voltage measurement. > |Voltage > > + |25 |PL Block RAM voltage measurement, VCCBRAM. > |Voltage > > + |26 |LPD Internal voltage measurement, VCC_PSINTLP > (supply4). |Voltage > > + |27 |FPD Internal voltage measurement, VCC_PSINTFP > (supply5). |Voltage > > + |28 |PS Auxiliary voltage measurement (supply6). > |Voltage > > + |29 |PL VCCADC voltage measurement (vccams). > |Voltage > > + |30 |Differential analog input signal voltage measurment. > |Voltage > > + |31 |VUser0 voltage measurement (supply7). > |Voltage > > + |32 |VUser1 voltage measurement (supply8). > |Voltage > > + |33 |VUser2 voltage measurement (supply9). > |Voltage > > + |34 |VUser3 voltage measurement (supply10). > |Voltage > > + |35 |Auxiliary ch 0 voltage measurement (VAux0). > |Voltage > > + |36 |Auxiliary ch 1 voltage measurement (VAux1). > |Voltage > > + |37 |Auxiliary ch 2 voltage measurement (VAux2). > |Voltage > > + |38 |Auxiliary ch 3 voltage measurement (VAux3). > |Voltage > > + |39 |Auxiliary ch 4 voltage measurement (VAux4). > |Voltage > > + |40 |Auxiliary ch 5 voltage measurement (VAux5). > |Voltage > > + |41 |Auxiliary ch 6 voltage measurement (VAux6). > |Voltage > > + |42 |Auxiliary ch 7 voltage measurement (VAux7). > |Voltage > > + |43 |Auxiliary ch 8 voltage measurement (VAux8). > |Voltage > > + |44 |Auxiliary ch 9 voltage measurement (VAux9). > |Voltage > > + |45 |Auxiliary ch 10 voltage measurement (VAux10). > |Voltage > > + |46 |Auxiliary ch 11 voltage measurement (VAux11). > |Voltage > > + |47 |Auxiliary ch 12 voltage measurement (VAux12). > |Voltage > > + |48 |Auxiliary ch 13 voltage measurement (VAux13). > |Voltage > > + |49 |Auxiliary ch 14 voltage measurement (VAux14). > |Voltage > > + |50 |Auxiliary ch 15 voltage measurement (VAux15). > |Voltage > > + > > + -------------------------------------------------------------------- > > + ------------------------------------ > > + > > +properties: > > + compatible: > > + enum: > > + - xlnx,zynqmp-ams > > + > > + interrupts: > > + maxItems: 1 > > + > > + reg: > > + description: AMS Controller register space > > + maxItems: 1 > > + > > + ranges: > > + description: > > + Maps the child address space for PS and/or PL. > > + maxItems: 1 > > + > > + '#address-cells': > > + const: 1 > > + > > + '#size-cells': > > + const: 1 > > + > > + '#io-channel-cells': > > + const: 1 > > + > > +patternProperties: > > + "^ams-ps@0,400$": > > If your going to hardcode the unit-address, then it's a fixed string and should > be under 'properties' instead. Can you point me to an example? When I tried putting it under just properties, I was not able to do so and was getting errors when I ran check_dt_bindings. The only way I was not getting the error was by putting it under pattern properties. My node looked something like this, "ams-ps@0": type:object ... ... > > The unit-address is also wrong. This is memory-mapped ranges, right? If so, > this should just be '0' and the next one '400'. I will fix this. > > > + type: object > > + description: | > > + PS (Processing System) SYSMON is memory mapped to PS. This block > has > > + built-in alarm generation logic that is used to interrupt the processor > > + based on condition set. > > + > > + properties: > > + compatible: > > + enum: > > + - xlnx,zynqmp-ams-ps > > + > > + reg: > > + description: Register Space for PS-SYSMON > > + maxItems: 1 > > + > > + required: > > + - compatible > > + - reg > > + > > + additionalProperties: false > > + > > + "^ams-pl@400,400$": > > + type: object > > + description: > > + PL-SYSMON is capable of monitoring off chip voltage and temperature. > > + PL-SYSMON block has DRP, JTAG and I2C interface to enable > monitoring > > + from external master. Out of this interface currently only DRP is > > + supported. This block has alarm generation logic that is used to > > + interrupt the processor based on condition set. > > + > > + properties: > > + compatible: > > + items: > > + - enum: > > + - xlnx,zynqmp-ams-pl > > + > > + reg: > > + description: Register Space for PL-SYSMON. > > + maxItems: 1 > > + > > + '#address-cells': > > + const: 1 > > + > > + '#size-cells': > > + const: 0 > > + > > + patternProperties: > > + "^channel@([2-4][0-9]|50)$": > > + type: object > > + description: > > + Describes the external channels connected. > > + > > + properties: > > + reg: > > + description: > > + Pair of pins the channel is connected to. This value is > > + same as Channel Number for a particular channel. > > + minimum: 20 > > + maximum: 50 > > + > > + xlnx,bipolar: > > Don't we have a common property for this now? > > > + $ref: /schemas/types.yaml#/definitions/flag > > + type: boolean > > + description: > > + If the set channel is used in bipolar mode. > > + > > + required: > > + - reg > > + > > + additionalProperties: false > > + > > +required: > > + - compatible > > + - reg > > + - ranges > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + bus { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + xilinx_ams: ams@ffa50000 { > > + compatible = "xlnx,zynqmp-ams"; > > + interrupt-parent = <&gic>; > > + interrupts = <0 56 4>; > > + reg = <0x0 0xffa50000 0x0 0x800>; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + #io-channel-cells = <1>; > > + ranges = <0 0 0xffa50800 0x800>; > > + > > + ams_ps: ams-ps@0,400 { > > + compatible = "xlnx,zynqmp-ams-ps"; > > + reg = <0 0x400>; > > + }; > > + > > + ams_pl: ams-pl@400,400 { > > + compatible = "xlnx,zynqmp-ams-pl"; > > + reg = <0x400 0x400>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + channel@30 { > > + reg = <30>; > > + xlnx,bipolar; > > + }; > > + channel@31 { > > + reg = <31>; > > + }; > > + channel@38 { > > + reg = <38>; > > + xlnx,bipolar; > > + }; > > + }; > > + }; > > + }; > > -- > > 2.17.1 > > > >
diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml new file mode 100644 index 000000000000..a065ddd55d38 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml @@ -0,0 +1,228 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/xlnx,zynqmp-ams.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Zynq Ultrascale AMS controller + +maintainers: + - Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com> + +description: | + The AMS (Analog Monitoring System) includes an ADC as well as on-chip sensors + that can be used to sample external voltages and monitor on-die operating + conditions, such as temperature and supply voltage levels. + The AMS has two SYSMON blocks which are PL (Programmable Logic) SYSMON and + PS (Processing System) SYSMON. + All designs should have AMS registers, but PS and PL are optional. The + AMS controller can work with only PS, only PL and both PS and PL + configurations. Please specify registers according to your design. Devicetree + should always have AMS module property. Providing PS & PL module is optional. + + AMS Channel Details + ``````````````````` + Sysmon Block |Channel| Details |Measurement + |Number | |Type + --------------------------------------------------------------------------------------------------------- + AMS CTRL |0 |System PLLs voltage measurement, VCC_PSPLL. |Voltage + |1 |Battery voltage measurement, VCC_PSBATT. |Voltage + |2 |PL Internal voltage measurement, VCCINT. |Voltage + |3 |Block RAM voltage measurement, VCCBRAM. |Voltage + |4 |PL Aux voltage measurement, VCCAUX. |Voltage + |5 |Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL. |Voltage + |6 |VCC_PSINTFP_DDR voltage measurement. |Voltage + --------------------------------------------------------------------------------------------------------- + PS Sysmon |7 |LPD temperature measurement. |Temperature + |8 |FPD temperature measurement (REMOTE). |Temperature + |9 |VCC PS LPD voltage measurement (supply1). |Voltage + |10 |VCC PS FPD voltage measurement (supply2). |Voltage + |11 |PS Aux voltage reference (supply3). |Voltage + |12 |DDR I/O VCC voltage measurement. |Voltage + |13 |PS IO Bank 503 voltage measurement (supply5). |Voltage + |14 |PS IO Bank 500 voltage measurement (supply6). |Voltage + |15 |VCCO_PSIO1 voltage measurement. |Voltage + |16 |VCCO_PSIO2 voltage measurement. |Voltage + |17 |VCC_PS_GTR voltage measurement (VPS_MGTRAVCC). |Voltage + |18 |VTT_PS_GTR voltage measurement (VPS_MGTRAVTT). |Voltage + |19 |VCC_PSADC voltage measurement. |Voltage + --------------------------------------------------------------------------------------------------------- + PL Sysmon |20 |PL temperature measurement. |Temperature + |21 |PL Internal voltage measurement, VCCINT. |Voltage + |22 |PL Auxiliary voltage measurement, VCCAUX. |Voltage + |23 |ADC Reference P+ voltage measurement. |Voltage + |24 |ADC Reference N- voltage measurement. |Voltage + |25 |PL Block RAM voltage measurement, VCCBRAM. |Voltage + |26 |LPD Internal voltage measurement, VCC_PSINTLP (supply4). |Voltage + |27 |FPD Internal voltage measurement, VCC_PSINTFP (supply5). |Voltage + |28 |PS Auxiliary voltage measurement (supply6). |Voltage + |29 |PL VCCADC voltage measurement (vccams). |Voltage + |30 |Differential analog input signal voltage measurment. |Voltage + |31 |VUser0 voltage measurement (supply7). |Voltage + |32 |VUser1 voltage measurement (supply8). |Voltage + |33 |VUser2 voltage measurement (supply9). |Voltage + |34 |VUser3 voltage measurement (supply10). |Voltage + |35 |Auxiliary ch 0 voltage measurement (VAux0). |Voltage + |36 |Auxiliary ch 1 voltage measurement (VAux1). |Voltage + |37 |Auxiliary ch 2 voltage measurement (VAux2). |Voltage + |38 |Auxiliary ch 3 voltage measurement (VAux3). |Voltage + |39 |Auxiliary ch 4 voltage measurement (VAux4). |Voltage + |40 |Auxiliary ch 5 voltage measurement (VAux5). |Voltage + |41 |Auxiliary ch 6 voltage measurement (VAux6). |Voltage + |42 |Auxiliary ch 7 voltage measurement (VAux7). |Voltage + |43 |Auxiliary ch 8 voltage measurement (VAux8). |Voltage + |44 |Auxiliary ch 9 voltage measurement (VAux9). |Voltage + |45 |Auxiliary ch 10 voltage measurement (VAux10). |Voltage + |46 |Auxiliary ch 11 voltage measurement (VAux11). |Voltage + |47 |Auxiliary ch 12 voltage measurement (VAux12). |Voltage + |48 |Auxiliary ch 13 voltage measurement (VAux13). |Voltage + |49 |Auxiliary ch 14 voltage measurement (VAux14). |Voltage + |50 |Auxiliary ch 15 voltage measurement (VAux15). |Voltage + -------------------------------------------------------------------------------------------------------- + +properties: + compatible: + enum: + - xlnx,zynqmp-ams + + interrupts: + maxItems: 1 + + reg: + description: AMS Controller register space + maxItems: 1 + + ranges: + description: + Maps the child address space for PS and/or PL. + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + '#io-channel-cells': + const: 1 + +patternProperties: + "^ams-ps@0,400$": + type: object + description: | + PS (Processing System) SYSMON is memory mapped to PS. This block has + built-in alarm generation logic that is used to interrupt the processor + based on condition set. + + properties: + compatible: + enum: + - xlnx,zynqmp-ams-ps + + reg: + description: Register Space for PS-SYSMON + maxItems: 1 + + required: + - compatible + - reg + + additionalProperties: false + + "^ams-pl@400,400$": + type: object + description: + PL-SYSMON is capable of monitoring off chip voltage and temperature. + PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring + from external master. Out of this interface currently only DRP is + supported. This block has alarm generation logic that is used to + interrupt the processor based on condition set. + + properties: + compatible: + items: + - enum: + - xlnx,zynqmp-ams-pl + + reg: + description: Register Space for PL-SYSMON. + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + "^channel@([2-4][0-9]|50)$": + type: object + description: + Describes the external channels connected. + + properties: + reg: + description: + Pair of pins the channel is connected to. This value is + same as Channel Number for a particular channel. + minimum: 20 + maximum: 50 + + xlnx,bipolar: + $ref: /schemas/types.yaml#/definitions/flag + type: boolean + description: + If the set channel is used in bipolar mode. + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + - ranges + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + xilinx_ams: ams@ffa50000 { + compatible = "xlnx,zynqmp-ams"; + interrupt-parent = <&gic>; + interrupts = <0 56 4>; + reg = <0x0 0xffa50000 0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + #io-channel-cells = <1>; + ranges = <0 0 0xffa50800 0x800>; + + ams_ps: ams-ps@0,400 { + compatible = "xlnx,zynqmp-ams-ps"; + reg = <0 0x400>; + }; + + ams_pl: ams-pl@400,400 { + compatible = "xlnx,zynqmp-ams-pl"; + reg = <0x400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + channel@30 { + reg = <30>; + xlnx,bipolar; + }; + channel@31 { + reg = <31>; + }; + channel@38 { + reg = <38>; + xlnx,bipolar; + }; + }; + }; + };
Xilinx AMS have several ADC channels that can be used for measurement of different voltages and temperatures. Document the same in the bindings. Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com> --- .../bindings/iio/adc/xlnx,zynqmp-ams.yaml | 228 ++++++++++++++++++ 1 file changed, 228 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml