Message ID | 20210511233535.4448-4-hjl.tools@gmail.com |
---|---|
State | New |
Headers | show |
Series | Allow TImode/OImode/XImode in op_by_pieces operations | expand |
On Wed, May 12, 2021 at 1:35 AM H.J. Lu <hjl.tools@gmail.com> wrote: > > It is only defined for i386 and everyone uses the default: > > #define MAX_BITSIZE_MODE_ANY_INT (64*BITS_PER_UNIT) The default is determined by genmodes.c which looks at the maximum size of any [partial] integer mode. Since we have INT_MODE (OI, 32); INT_MODE (XI, 64); this will increase the size of wide_int. aarch64 and arm are the only other targets with XImode, OImode is also used by s390 and ia64. Keeping wide_int small is desirable. Richard. > Whatever problems we had before, they have been fixed now. > > * config/i386/i386-modes.def (MAX_BITSIZE_MODE_ANY_INT): Removed. > --- > gcc/config/i386/i386-modes.def | 15 +++------------ > 1 file changed, 3 insertions(+), 12 deletions(-) > > diff --git a/gcc/config/i386/i386-modes.def b/gcc/config/i386/i386-modes.def > index dbddfd8e48f..4e7014be034 100644 > --- a/gcc/config/i386/i386-modes.def > +++ b/gcc/config/i386/i386-modes.def > @@ -107,19 +107,10 @@ INT_MODE (XI, 64); > PARTIAL_INT_MODE (HI, 16, P2QI); > PARTIAL_INT_MODE (SI, 32, P2HI); > > -/* Mode used for signed overflow checking of TImode. As > - MAX_BITSIZE_MODE_ANY_INT is only 160, wide-int.h reserves only that > - rounded up to multiple of HOST_BITS_PER_WIDE_INT bits in wide_int etc., > - so OImode is too large. For the overflow checking we actually need > - just 1 or 2 bits beyond TImode precision. Use 160 bits to have > - a multiple of 32. */ > +/* Mode used for signed overflow checking of TImode. For the overflow > + checking we actually need just 1 or 2 bits beyond TImode precision. > + Use 160 bits to have a multiple of 32. */ > PARTIAL_INT_MODE (OI, 160, POI); > > -/* Keep the OI and XI modes from confusing the compiler into thinking > - that these modes could actually be used for computation. They are > - only holders for vectors during data movement. Include POImode precision > - though. */ > -#define MAX_BITSIZE_MODE_ANY_INT (160) > - > /* The symbol Pmode stands for one of the above machine modes (usually SImode). > The tm.h file specifies which one. It is not a distinct mode. */ > -- > 2.31.1 >
On Wed, May 12, 2021 at 2:00 AM Richard Biener <richard.guenther@gmail.com> wrote: > > On Wed, May 12, 2021 at 1:35 AM H.J. Lu <hjl.tools@gmail.com> wrote: > > > > It is only defined for i386 and everyone uses the default: > > > > #define MAX_BITSIZE_MODE_ANY_INT (64*BITS_PER_UNIT) > > The default is determined by genmodes.c which looks at the maximum > size of any [partial] integer mode. Since we have > > INT_MODE (OI, 32); > INT_MODE (XI, 64); > > this will increase the size of wide_int. aarch64 and arm are the only > other targets with XImode, OImode is also used by s390 and ia64. > > Keeping wide_int small is desirable. Since I want to use OImode and XImode in op_by_pieces operations, wide_int needs to support OImode and XImode. > Richard. > > > Whatever problems we had before, they have been fixed now. > > > > * config/i386/i386-modes.def (MAX_BITSIZE_MODE_ANY_INT): Removed. > > --- > > gcc/config/i386/i386-modes.def | 15 +++------------ > > 1 file changed, 3 insertions(+), 12 deletions(-) > > > > diff --git a/gcc/config/i386/i386-modes.def b/gcc/config/i386/i386-modes.def > > index dbddfd8e48f..4e7014be034 100644 > > --- a/gcc/config/i386/i386-modes.def > > +++ b/gcc/config/i386/i386-modes.def > > @@ -107,19 +107,10 @@ INT_MODE (XI, 64); > > PARTIAL_INT_MODE (HI, 16, P2QI); > > PARTIAL_INT_MODE (SI, 32, P2HI); > > > > -/* Mode used for signed overflow checking of TImode. As > > - MAX_BITSIZE_MODE_ANY_INT is only 160, wide-int.h reserves only that > > - rounded up to multiple of HOST_BITS_PER_WIDE_INT bits in wide_int etc., > > - so OImode is too large. For the overflow checking we actually need > > - just 1 or 2 bits beyond TImode precision. Use 160 bits to have > > - a multiple of 32. */ > > +/* Mode used for signed overflow checking of TImode. For the overflow > > + checking we actually need just 1 or 2 bits beyond TImode precision. > > + Use 160 bits to have a multiple of 32. */ > > PARTIAL_INT_MODE (OI, 160, POI); > > > > -/* Keep the OI and XI modes from confusing the compiler into thinking > > - that these modes could actually be used for computation. They are > > - only holders for vectors during data movement. Include POImode precision > > - though. */ > > -#define MAX_BITSIZE_MODE_ANY_INT (160) > > - > > /* The symbol Pmode stands for one of the above machine modes (usually SImode). > > The tm.h file specifies which one. It is not a distinct mode. */ > > -- > > 2.31.1 > >
On Wed, May 12, 2021 at 2:06 PM H.J. Lu <hjl.tools@gmail.com> wrote: > > On Wed, May 12, 2021 at 2:00 AM Richard Biener > <richard.guenther@gmail.com> wrote: > > > > On Wed, May 12, 2021 at 1:35 AM H.J. Lu <hjl.tools@gmail.com> wrote: > > > > > > It is only defined for i386 and everyone uses the default: > > > > > > #define MAX_BITSIZE_MODE_ANY_INT (64*BITS_PER_UNIT) > > > > The default is determined by genmodes.c which looks at the maximum > > size of any [partial] integer mode. Since we have > > > > INT_MODE (OI, 32); > > INT_MODE (XI, 64); > > > > this will increase the size of wide_int. aarch64 and arm are the only > > other targets with XImode, OImode is also used by s390 and ia64. > > > > Keeping wide_int small is desirable. > > Since I want to use OImode and XImode in op_by_pieces operations, > wide_int needs to support OImode and XImode. OK, I see. Richard. > > Richard. > > > > > Whatever problems we had before, they have been fixed now. > > > > > > * config/i386/i386-modes.def (MAX_BITSIZE_MODE_ANY_INT): Removed. > > > --- > > > gcc/config/i386/i386-modes.def | 15 +++------------ > > > 1 file changed, 3 insertions(+), 12 deletions(-) > > > > > > diff --git a/gcc/config/i386/i386-modes.def b/gcc/config/i386/i386-modes.def > > > index dbddfd8e48f..4e7014be034 100644 > > > --- a/gcc/config/i386/i386-modes.def > > > +++ b/gcc/config/i386/i386-modes.def > > > @@ -107,19 +107,10 @@ INT_MODE (XI, 64); > > > PARTIAL_INT_MODE (HI, 16, P2QI); > > > PARTIAL_INT_MODE (SI, 32, P2HI); > > > > > > -/* Mode used for signed overflow checking of TImode. As > > > - MAX_BITSIZE_MODE_ANY_INT is only 160, wide-int.h reserves only that > > > - rounded up to multiple of HOST_BITS_PER_WIDE_INT bits in wide_int etc., > > > - so OImode is too large. For the overflow checking we actually need > > > - just 1 or 2 bits beyond TImode precision. Use 160 bits to have > > > - a multiple of 32. */ > > > +/* Mode used for signed overflow checking of TImode. For the overflow > > > + checking we actually need just 1 or 2 bits beyond TImode precision. > > > + Use 160 bits to have a multiple of 32. */ > > > PARTIAL_INT_MODE (OI, 160, POI); > > > > > > -/* Keep the OI and XI modes from confusing the compiler into thinking > > > - that these modes could actually be used for computation. They are > > > - only holders for vectors during data movement. Include POImode precision > > > - though. */ > > > -#define MAX_BITSIZE_MODE_ANY_INT (160) > > > - > > > /* The symbol Pmode stands for one of the above machine modes (usually SImode). > > > The tm.h file specifies which one. It is not a distinct mode. */ > > > -- > > > 2.31.1 > > > > > > > -- > H.J.
diff --git a/gcc/config/i386/i386-modes.def b/gcc/config/i386/i386-modes.def index dbddfd8e48f..4e7014be034 100644 --- a/gcc/config/i386/i386-modes.def +++ b/gcc/config/i386/i386-modes.def @@ -107,19 +107,10 @@ INT_MODE (XI, 64); PARTIAL_INT_MODE (HI, 16, P2QI); PARTIAL_INT_MODE (SI, 32, P2HI); -/* Mode used for signed overflow checking of TImode. As - MAX_BITSIZE_MODE_ANY_INT is only 160, wide-int.h reserves only that - rounded up to multiple of HOST_BITS_PER_WIDE_INT bits in wide_int etc., - so OImode is too large. For the overflow checking we actually need - just 1 or 2 bits beyond TImode precision. Use 160 bits to have - a multiple of 32. */ +/* Mode used for signed overflow checking of TImode. For the overflow + checking we actually need just 1 or 2 bits beyond TImode precision. + Use 160 bits to have a multiple of 32. */ PARTIAL_INT_MODE (OI, 160, POI); -/* Keep the OI and XI modes from confusing the compiler into thinking - that these modes could actually be used for computation. They are - only holders for vectors during data movement. Include POImode precision - though. */ -#define MAX_BITSIZE_MODE_ANY_INT (160) - /* The symbol Pmode stands for one of the above machine modes (usually SImode). The tm.h file specifies which one. It is not a distinct mode. */