[24/57] arm: Remove tricorder board

Message ID	20210221010634.21310-25-trini@konsulko.com
State	Accepted
Commit	d137604c20a448cab66590268dc56f255976ee18
Delegated to:	Tom Rini
Headers	show Return-Path: <u-boot-bounces@lists.denx.de> From: Tom Rini <trini@konsulko.com> To: u-boot@lists.denx.de Cc: Thomas Weber <weber@corscience.de> Subject: [PATCH 24/57] arm: Remove tricorder board Date: Sat, 20 Feb 2021 20:06:01 -0500 Message-Id: <20210221010634.21310-25-trini@konsulko.com> In-Reply-To: <20210221010634.21310-1-trini@konsulko.com> References: <20210221010634.21310-1-trini@konsulko.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Precedence: list Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
Series	Enforce DM_MMC migration and remove platforms \| expand [00/57] Enforce DM_MMC migration and remove platforms [01/57] arm: Remove xfi3 board [02/57] arm: Remove MX23_OLINUXINO board [03/57] arm: Remove SANSA_FUZE_PLUS board [04/57] arm: Remove sc_sps_1 board [05/57] arm: Remove ts4600 board [06/57] arm: Remove apf27 board [07/57] arm: Remove mx25pdk board [08/57] arm: Remove openrd board [09/57] arm: Remove sheevaplug board [10/57] arm: Remove vexpress_ca15_tc2 board [11/57] arm: Remove secomx6quq7 board [12/57] arm: Remove s32v234evb board [13/57] arm: Remove bcm958712k board [14/57] arm: Remove wb45n board [15/57] arm: Remove wb50n board [16/57] arm: Remove picosam9g45 board [17/57] arm: Remove bcm28155_ap board [18/57] arm: Remove bcm23550_w1d board [19/57] arm: Remove warp board [20/57] arm: Remove Broadcom Cygnus boards [21/57] arm: Remove platinum_picon board [22/57] arm: Remove embest mx6boards support [23/57] arm: Remove udoo and udoo_neo boards [24/57] arm: Remove tricorder board [25/57] arm: Remove omap3_ha board [26/57] arm: Remove am3517_crane board [27/57] arm: Remove kc1 board [28/57] arm: Remove usbarmory board [29/57] arm: Remove xpress board [30/57] arm: Remove dms-ba16 board [31/57] arm: Remove zc5202 and zc5601 boards [32/57] arm: Remove pfla02 board [33/57] arm: Remove mx53ard board [34/57] arm: Remove mx53evk board [35/57] arm: Remove mx53smd board [36/57] arm: Remove ts4800 board [37/57] arm: Remove titanium board [38/57] arm: Remove cgtqmx6eval board [39/57] arm: Remove mx6dlarm2 board [40/57] arm: Remove sksimx6 board [41/57] arm: Remove tqma6s_wru4_mmc config [42/57] ppc: Remove T1040RDB boards [43/57] ppc: Remove TARGET_T1040QDS references [44/57] ppc: Remove T2081QDS board and ARCH_T2081 support [45/57] ppc: Remove MPC8308RDB board [46/57] ppc: Remove gdsys strider boards [47/57] ppc: Remove gdsys hrcon boards [48/57] ppc: Remove controlcenterd boards [49/57] ppc: Remove ARCH_P1022 support [50/57] ppc: Remove MPC837XERDB board [51/57] ppc: configs: Remove a few non-updated build configurations [52/57] ppc: Remove MPC8569MDS board [53/57] ppc: Remove Cyrus_P5020 and P5040 boards [54/57] ppc: Remove MPC837XEMDS board [55/57] ppc: Remove T1023RDB board [56/57] ppc: Remove T4160RDB board [57/57] DM: DM_MMC migration is now mandatory for non-SPL

diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig index 0a6eb4cb26d0..16e449cca026 100644 --- a/arch/arm/mach-omap2/omap3/Kconfig +++ b/arch/arm/mach-omap2/omap3/Kconfig @@ -97,10 +97,6 @@ config TARGET_OMAP3_PANDORA select OMAP3_GPIO_4 select OMAP3_GPIO_6 -config TARGET_TRICORDER - bool "Tricorder" - select OMAP3_GPIO_2 - config TARGET_OMAP3_LOGIC bool "OMAP3 Logic" select BOARD_LATE_INIT @@ -167,7 +163,6 @@ source "board/timll/devkit8000/Kconfig" source "board/ti/evm/Kconfig" source "board/isee/igep00x0/Kconfig" source "board/ti/am3517crane/Kconfig" -source "board/corscience/tricorder/Kconfig" source "board/logicpd/omap3som/Kconfig" source "board/nokia/rx51/Kconfig" source "board/technexion/tao3530/Kconfig" diff --git a/board/corscience/tricorder/Kconfig b/board/corscience/tricorder/Kconfig deleted file mode 100644 index 345ac83d48a8..000000000000 --- a/board/corscience/tricorder/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_TRICORDER - -config SYS_BOARD - default "tricorder" - -config SYS_VENDOR - default "corscience" - -config SYS_CONFIG_NAME - default "tricorder" - -endif diff --git a/board/corscience/tricorder/MAINTAINERS b/board/corscience/tricorder/MAINTAINERS deleted file mode 100644 index 8a8171b550c2..000000000000 --- a/board/corscience/tricorder/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -TRICORDER BOARD -M: Thomas Weber <weber@corscience.de> -S: Maintained -F: board/corscience/tricorder/ -F: include/configs/tricorder.h -F: configs/tricorder_defconfig -F: configs/tricorder_flash_defconfig diff --git a/board/corscience/tricorder/Makefile b/board/corscience/tricorder/Makefile deleted file mode 100644 index bee39a4f6a3b..000000000000 --- a/board/corscience/tricorder/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2012 -# Thomas Weber <weber@corscience.de> - -obj-y := tricorder.o tricorder-eeprom.o led.o diff --git a/board/corscience/tricorder/led.c b/board/corscience/tricorder/led.c deleted file mode 100644 index d876dd7b9f57..000000000000 --- a/board/corscience/tricorder/led.c +++ /dev/null @@ -1,79 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (c) 2013 Corscience GmbH & Co.KG - * Andreas Bießmann <andreas.biessmann@corscience.de> - */ -#include <common.h> -#include <status_led.h> -#include <twl4030.h> -#include <asm/arch/cpu.h> -#include <asm/io.h> -#include <asm/arch/sys_proto.h> -#include <asm/gpio.h> - -#define TRICORDER_STATUS_LED_YELLOW 42 -#define TRICORDER_STATUS_LED_GREEN 43 - -void __led_init(led_id_t mask, int state) -{ - __led_set(mask, state); -} - -void __led_toggle(led_id_t mask) -{ - int toggle_gpio = 0; -#ifdef CONFIG_LED_STATUS0 - if (!toggle_gpio && CONFIG_LED_STATUS_BIT & mask) - toggle_gpio = TRICORDER_STATUS_LED_GREEN; -#endif -#ifdef CONFIG_LED_STATUS1 - if (!toggle_gpio && CONFIG_LED_STATUS_BIT1 & mask) - toggle_gpio = TRICORDER_STATUS_LED_YELLOW; -#endif -#ifdef CONFIG_LED_STATUS2 - if (!toggle_gpio && CONFIG_LED_STATUS_BIT2 & mask) { - uint8_t val; - twl4030_i2c_read_u8(TWL4030_CHIP_LED, TWL4030_LED_LEDEN, - &val); - val ^= (TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDAPWM); - twl4030_i2c_write_u8(TWL4030_CHIP_LED, TWL4030_LED_LEDEN, - val); - } -#endif - if (toggle_gpio) { - int state; - gpio_request(toggle_gpio, ""); - state = gpio_get_value(toggle_gpio); - gpio_set_value(toggle_gpio, !state); - } -} - -void __led_set(led_id_t mask, int state) -{ -#ifdef CONFIG_LED_STATUS0 - if (CONFIG_LED_STATUS_BIT & mask) { - gpio_request(TRICORDER_STATUS_LED_GREEN, ""); - gpio_direction_output(TRICORDER_STATUS_LED_GREEN, 0); - gpio_set_value(TRICORDER_STATUS_LED_GREEN, state); - } -#endif -#ifdef CONFIG_LED_STATUS1 - if (CONFIG_LED_STATUS_BIT1 & mask) { - gpio_request(TRICORDER_STATUS_LED_YELLOW, ""); - gpio_direction_output(TRICORDER_STATUS_LED_YELLOW, 0); - gpio_set_value(TRICORDER_STATUS_LED_YELLOW, state); - } -#endif -#ifdef CONFIG_LED_STATUS2 - if (CONFIG_LED_STATUS_BIT2 & mask) { - if (CONFIG_LED_STATUS_OFF == state) - twl4030_i2c_write_u8(TWL4030_CHIP_LED, - TWL4030_LED_LEDEN, 0); - else - twl4030_i2c_write_u8(TWL4030_CHIP_LED, - TWL4030_LED_LEDEN, - (TWL4030_LED_LEDEN_LEDAON | - TWL4030_LED_LEDEN_LEDAPWM)); - } -#endif -} diff --git a/board/corscience/tricorder/tricorder-eeprom.c b/board/corscience/tricorder/tricorder-eeprom.c deleted file mode 100644 index 192af304d9fb..000000000000 --- a/board/corscience/tricorder/tricorder-eeprom.c +++ /dev/null @@ -1,225 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2013 - * Corscience GmbH & Co. KG, <www.corscience.de> - * Andreas Bießmann <andreas.biessmann@corscience.de> - */ -#include <common.h> -#include <command.h> -#include <eeprom.h> -#include <i2c.h> -#include <u-boot/crc.h> - -#include "tricorder-eeprom.h" - -static inline void warn_wrong_value(const char *msg, unsigned int a, - unsigned int b) -{ - printf("Expected EEPROM %s %08x, got %08x\n", msg, a, b); -} - -static int handle_eeprom_v0(struct tricorder_eeprom *eeprom) -{ - struct tricorder_eeprom_v0 { - uint32_t magic; - uint16_t length; - uint16_t version; - char board_name[TRICORDER_BOARD_NAME_LENGTH]; - char board_version[TRICORDER_BOARD_VERSION_LENGTH]; - char board_serial[TRICORDER_BOARD_SERIAL_LENGTH]; - uint32_t crc32; - } __packed eepromv0; - uint32_t crc; - - printf("Old EEPROM (v0), consider rewrite!\n"); - - if (be16_to_cpu(eeprom->length) != sizeof(eepromv0)) { - warn_wrong_value("length", sizeof(eepromv0), - be16_to_cpu(eeprom->length)); - return 1; - } - - memcpy(&eepromv0, eeprom, sizeof(eepromv0)); - - crc = crc32(0L, (unsigned char *)&eepromv0, - sizeof(eepromv0) - sizeof(eepromv0.crc32)); - if (be32_to_cpu(eepromv0.crc32) != crc) { - warn_wrong_value("CRC", be32_to_cpu(eepromv0.crc32), - crc); - return 1; - } - - /* Ok the content is correct, do the conversion */ - memset(eeprom->interface_version, 0x0, - TRICORDER_INTERFACE_VERSION_LENGTH); - crc = crc32(0L, (unsigned char *)eeprom, TRICORDER_EEPROM_CRC_SIZE); - eeprom->crc32 = cpu_to_be32(crc); - - return 0; -} - -static int handle_eeprom_v1(struct tricorder_eeprom *eeprom) -{ - uint32_t crc; - - if (be16_to_cpu(eeprom->length) != TRICORDER_EEPROM_SIZE) { - warn_wrong_value("length", TRICORDER_EEPROM_SIZE, - be16_to_cpu(eeprom->length)); - return 1; - } - - crc = crc32(0L, (unsigned char *)eeprom, TRICORDER_EEPROM_CRC_SIZE); - if (be32_to_cpu(eeprom->crc32) != crc) { - warn_wrong_value("CRC", be32_to_cpu(eeprom->crc32), crc); - return 1; - } - - return 0; -} - -int tricorder_get_eeprom(int addr, struct tricorder_eeprom *eeprom) -{ - unsigned int bus = i2c_get_bus_num(); - i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM); - - memset(eeprom, 0, TRICORDER_EEPROM_SIZE); - - i2c_read(addr, 0, 2, (unsigned char *)eeprom, TRICORDER_EEPROM_SIZE); - i2c_set_bus_num(bus); - - if (be32_to_cpu(eeprom->magic) != TRICORDER_EEPROM_MAGIC) { - warn_wrong_value("magic", TRICORDER_EEPROM_MAGIC, - be32_to_cpu(eeprom->magic)); - return 1; - } - - switch (be16_to_cpu(eeprom->version)) { - case 0: - return handle_eeprom_v0(eeprom); - case 1: - return handle_eeprom_v1(eeprom); - default: - warn_wrong_value("version", TRICORDER_EEPROM_VERSION, - be16_to_cpu(eeprom->version)); - return 1; - } -} - -#if !defined(CONFIG_SPL) -int tricorder_eeprom_read(unsigned devaddr) -{ - struct tricorder_eeprom eeprom; - int ret = tricorder_get_eeprom(devaddr, &eeprom); - - if (ret) - return ret; - - printf("Board type: %.*s\n", - sizeof(eeprom.board_name), eeprom.board_name); - printf("Board version: %.*s\n", - sizeof(eeprom.board_version), eeprom.board_version); - printf("Board serial: %.*s\n", - sizeof(eeprom.board_serial), eeprom.board_serial); - printf("Board interface version: %.*s\n", - sizeof(eeprom.interface_version), - eeprom.interface_version); - - return ret; -} - -int tricorder_eeprom_write(unsigned devaddr, const char *name, - const char *version, const char *serial, const char *interface) -{ - struct tricorder_eeprom eeprom, eeprom_verify; - size_t length; - uint32_t crc; - int ret; - unsigned char *p; - int i; - - memset(eeprom, 0, TRICORDER_EEPROM_SIZE); - memset(eeprom_verify, 0, TRICORDER_EEPROM_SIZE); - - eeprom.magic = cpu_to_be32(TRICORDER_EEPROM_MAGIC); - eeprom.length = cpu_to_be16(TRICORDER_EEPROM_SIZE); - eeprom.version = cpu_to_be16(TRICORDER_EEPROM_VERSION); - - length = min(sizeof(eeprom.board_name), strlen(name)); - strncpy(eeprom.board_name, name, length); - - length = min(sizeof(eeprom.board_version), strlen(version)); - strncpy(eeprom.board_version, version, length); - - length = min(sizeof(eeprom.board_serial), strlen(serial)); - strncpy(eeprom.board_serial, serial, length); - - if (interface) { - length = min(sizeof(eeprom.interface_version), - strlen(interface)); - strncpy(eeprom.interface_version, interface, length); - } - - crc = crc32(0L, (unsigned char *)&eeprom, TRICORDER_EEPROM_CRC_SIZE); - eeprom.crc32 = cpu_to_be32(crc); - -#if defined(DEBUG) - puts("Tricorder EEPROM content:\n"); - print_buffer(0, &eeprom, 1, sizeof(eeprom), 16); -#endif - - eeprom_init(CONFIG_SYS_EEPROM_BUS_NUM); - - ret = eeprom_write(devaddr, 0, (unsigned char *)&eeprom, - TRICORDER_EEPROM_SIZE); - if (ret) - printf("Tricorder: Could not write EEPROM content!\n"); - - ret = eeprom_read(devaddr, 0, (unsigned char *)&eeprom_verify, - TRICORDER_EEPROM_SIZE); - if (ret) - printf("Tricorder: Could not read EEPROM content!\n"); - - if (memcmp(&eeprom, &eeprom_verify, sizeof(eeprom)) != 0) { - printf("Tricorder: Could not verify EEPROM content!\n"); - ret = 1; - } - - return ret; -} - -int do_tricorder_eeprom(struct cmd_tbl *cmdtp, int flag, int argc, char *argv[]) -{ - if (argc == 3) { - ulong dev_addr = simple_strtoul(argv[2], NULL, 16); - - if (strcmp(argv[1], "read") == 0) - return tricorder_eeprom_read(dev_addr); - } else if (argc == 6 || argc == 7) { - ulong dev_addr = simple_strtoul(argv[2], NULL, 16); - char *name = argv[3]; - char *version = argv[4]; - char *serial = argv[5]; - char *interface = NULL; - - if (argc == 7) - interface = argv[6]; - - if (strcmp(argv[1], "write") == 0) - return tricorder_eeprom_write(dev_addr, name, version, - serial, interface); - } - - return CMD_RET_USAGE; -} - -U_BOOT_CMD( - tricordereeprom, 7, 1, do_tricorder_eeprom, - "Tricorder EEPROM", - "read devaddr\n" - " - read Tricorder EEPROM at devaddr and print content\n" - "tricordereeprom write devaddr name version serial [interface]\n" - " - write Tricorder EEPROM at devaddr with 'name', 'version'" - "and 'serial'\n" - " optional add an HW interface parameter" -); -#endif /* CONFIG_SPL */ diff --git a/board/corscience/tricorder/tricorder-eeprom.h b/board/corscience/tricorder/tricorder-eeprom.h deleted file mode 100644 index 7107b02a2c10..000000000000 --- a/board/corscience/tricorder/tricorder-eeprom.h +++ /dev/null @@ -1,40 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2013 - * Corscience GmbH & Co. KG, <www.corscience.de> - * Andreas Bießmann <andreas.biessmann@corscience.de> - */ -#ifndef TRICORDER_EEPROM_H_ -#define TRICORDER_EEPROM_H_ - -#include <linux/compiler.h> - -#define TRICORDER_EEPROM_MAGIC 0xc2a94f52 -#define TRICORDER_EEPROM_VERSION 1 - -#define TRICORDER_BOARD_NAME_LENGTH 12 -#define TRICORDER_BOARD_VERSION_LENGTH 4 -#define TRICORDER_BOARD_SERIAL_LENGTH 12 -#define TRICORDER_INTERFACE_VERSION_LENGTH 4 - -struct tricorder_eeprom { - uint32_t magic; - uint16_t length; - uint16_t version; - char board_name[TRICORDER_BOARD_NAME_LENGTH]; - char board_version[TRICORDER_BOARD_VERSION_LENGTH]; - char board_serial[TRICORDER_BOARD_SERIAL_LENGTH]; - char interface_version[TRICORDER_INTERFACE_VERSION_LENGTH]; - uint32_t crc32; -} __packed; - -#define TRICORDER_EEPROM_SIZE sizeof(struct tricorder_eeprom) -#define TRICORDER_EEPROM_CRC_SIZE (TRICORDER_EEPROM_SIZE - \ - sizeof(uint32_t)) - -/** - * @brief read eeprom information from a specific eeprom address - */ -int tricorder_get_eeprom(int addr, struct tricorder_eeprom *eeprom); - -#endif /* TRICORDER_EEPROM_H_ */ diff --git a/board/corscience/tricorder/tricorder.c b/board/corscience/tricorder/tricorder.c deleted file mode 100644 index 3f4a40fd6593..000000000000 --- a/board/corscience/tricorder/tricorder.c +++ /dev/null @@ -1,208 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2012 - * Corscience GmbH & Co. KG, <www.corscience.de> - * Thomas Weber <weber@corscience.de> - * Sunil Kumar <sunilsaini05@gmail.com> - * Shashi Ranjan <shashiranjanmca05@gmail.com> - * - * Derived from Devkit8000 code by - * Frederik Kriewitz <frederik@kriewitz.eu> - */ -#include <common.h> -#include <init.h> -#include <malloc.h> -#include <twl4030.h> -#include <status_led.h> -#include <asm/global_data.h> -#include <asm/io.h> -#include <asm/gpio.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/mux.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/mem.h> -#include "tricorder.h" -#include "tricorder-eeprom.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Routine: board_init - * Description: Early hardware init. - */ -int board_init(void) -{ - gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ - /* boot param addr */ - gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); - - return 0; -} - -/** - * get_eeprom - read the eeprom - * - * @eeprom - pointer to a eeprom struct to fill - * - * This function will panic() on wrong EEPROM content - */ -static void get_eeprom(struct tricorder_eeprom *eeprom) -{ - int ret; - - if (!eeprom) - panic("No eeprom given!\n"); - - ret = gpio_request(7, "BMS"); - if (ret) - panic("gpio: requesting BMS pin failed\n"); - - ret = gpio_direction_input(7); - if (ret) - panic("gpio: set BMS as input failed\n"); - - ret = gpio_get_value(7); - if (ret < 0) - panic("gpio: get BMS pin state failed\n"); - - gpio_free(7); - - if (ret == 0) { - /* BMS is _not_ set, do the EEPROM check */ - ret = tricorder_get_eeprom(0x51, eeprom); - if (!ret) { - if (strncmp(eeprom->board_name, "CS10411", 7) != 0) - panic("Wrong board name '%.*s'\n", - sizeof(eeprom->board_name), - eeprom->board_name); - if (eeprom->board_version[0] < 'D') - panic("Wrong board version '%.*s'\n", - sizeof(eeprom->board_version), - eeprom->board_version); - } else { - panic("Could not get board revision\n"); - } - } else { - memset(eeprom, 0, TRICORDER_EEPROM_SIZE); - } -} - -/** - * print_hwversion - print out a HW version string - * - * @eeprom - pointer to the eeprom - */ -static void print_hwversion(struct tricorder_eeprom *eeprom) -{ - size_t len; - if (!eeprom) - panic("No eeprom given!"); - - printf("Board %.*s:%.*s serial %.*s", - sizeof(eeprom->board_name), eeprom->board_name, - sizeof(eeprom->board_version), eeprom->board_version, - sizeof(eeprom->board_serial), eeprom->board_serial); - - len = strnlen(eeprom->interface_version, - sizeof(eeprom->interface_version)); - if (len > 0) - printf(" HW interface version %.*s", - sizeof(eeprom->interface_version), - eeprom->interface_version); - puts("\n"); -} - -/* - * Routine: misc_init_r - * Description: Configure board specific parts - */ -int misc_init_r(void) -{ - struct tricorder_eeprom eeprom; - get_eeprom(&eeprom); - print_hwversion(&eeprom); - - twl4030_power_init(); - status_led_set(0, CONFIG_LED_STATUS_ON); - status_led_set(1, CONFIG_LED_STATUS_ON); - status_led_set(2, CONFIG_LED_STATUS_ON); - - omap_die_id_display(); - - return 0; -} - -/* - * Routine: set_muxconf_regs - * Description: Setting up the configuration Mux registers specific to the - * hardware. Many pins need to be moved from protect to primary - * mode. - */ -void set_muxconf_regs(void) -{ - MUX_TRICORDER(); -} - -#if defined(CONFIG_MMC) -int board_mmc_init(struct bd_info *bis) -{ - return omap_mmc_init(0, 0, 0, -1, -1); -} -#endif - -#if defined(CONFIG_MMC) -void board_mmc_power_init(void) -{ - twl4030_power_mmc_init(0); -} -#endif - -/* - * Routine: get_board_mem_timings - * Description: If we use SPL then there is no x-loader nor config header - * so we have to setup the DDR timings ourself on the first bank. This - * provides the timing values back to the function that configures - * the memory. We have either one or two banks of 128MB DDR. - */ -void get_board_mem_timings(struct board_sdrc_timings *timings) -{ - struct tricorder_eeprom eeprom; - get_eeprom(&eeprom); - - /* General SDRC config */ - if (eeprom.board_version[0] > 'D') { - /* use optimized timings for our SDRAM device */ - timings->mcfg = MCFG((256 << 20), 14); -#define MT46H64M32_TDAL 6 /* Twr/Tck + Trp/tck */ - /* 15/6 + 18/6 = 5.5 -> 6 */ -#define MT46H64M32_TDPL 3 /* 15/6 = 2.5 -> 3 (Twr) */ -#define MT46H64M32_TRRD 2 /* 12/6 = 2 */ -#define MT46H64M32_TRCD 3 /* 18/6 = 3 */ -#define MT46H64M32_TRP 3 /* 18/6 = 3 */ -#define MT46H64M32_TRAS 7 /* 42/6 = 7 */ -#define MT46H64M32_TRC 10 /* 60/6 = 10 */ -#define MT46H64M32_TRFC 12 /* 72/6 = 12 */ - timings->ctrla = ACTIM_CTRLA(MT46H64M32_TRFC, MT46H64M32_TRC, - MT46H64M32_TRAS, MT46H64M32_TRP, - MT46H64M32_TRCD, MT46H64M32_TRRD, - MT46H64M32_TDPL, - MT46H64M32_TDAL); - -#define MT46H64M32_TWTR 1 -#define MT46H64M32_TCKE 1 -#define MT46H64M32_XSR 19 /* 112.5/6 = 18.75 => ~19 */ -#define MT46H64M32_TXP 1 - timings->ctrlb = ACTIM_CTRLB(MT46H64M32_TWTR, MT46H64M32_TCKE, - MT46H64M32_TXP, MT46H64M32_XSR); - - timings->mr = MICRON_V_MR_165; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; - } else { - /* use conservative beagleboard timings as default */ - timings->mcfg = MICRON_V_MCFG_165(128 << 20); - timings->ctrla = MICRON_V_ACTIMA_165; - timings->ctrlb = MICRON_V_ACTIMB_165; - timings->mr = MICRON_V_MR_165; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; - } -} diff --git a/board/corscience/tricorder/tricorder.h b/board/corscience/tricorder/tricorder.h deleted file mode 100644 index f083a5e9a22d..000000000000 --- a/board/corscience/tricorder/tricorder.h +++ /dev/null @@ -1,358 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2008 - * Dirk Behme <dirk.behme@gmail.com> - * - * (C) Copyright 2012 - * Corscience GmbH & Co. KG, <www.corscience.de> - * Thomas Weber <weber@corscience.de> - */ -#ifndef _TRICORDER_H_ -#define _TRICORDER_H_ - -const omap3_sysinfo sysinfo = { - DDR_STACKED, - "OMAP3 Tricorder", - "NAND", -}; - -/* - * IEN - Input Enable - * IDIS - Input Disable - * PTD - Pull type Down - * PTU - Pull type Up - * DIS - Pull type selection is inactive - * EN - Pull type selection is active - * M0 - Mode 0 - * The commented string gives the final mux configuration for that pin - */ -#define MUX_TRICORDER() \ - /* SDRC */\ - MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ - MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ - MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ - MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ - MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ - MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ - MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ - MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ - MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ - MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ - MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ - MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ - MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ - MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ - MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ - MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ - MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ - MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ - MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ - MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ - MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ - MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ - MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ - MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ - MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ - MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ - MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ - MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ - MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ - MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ - MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ - MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ - MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ - MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ - MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ - MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ - MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ - /* GPMC */\ - MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ - MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ - MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ - MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ - MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ - MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ - MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ - MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ - MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M4)) /*GPIO 42*/\ - MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M4)) /*GPIO 43*/\ - MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ - MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ - MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ - MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ - MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ - MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ - MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ - MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ - MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ - MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ - MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ - MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ - MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ - MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ - MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ - MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ - MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0 NAND*/\ - MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ - MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ - MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ - MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ - MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) /*GPMC_nCS5*/\ - MUX_VAL(CP(GPMC_NCS6), (IDIS | PTU | EN | M0)) /*GPMC_nCS6*/\ - MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | EN | M0)) /*GPMC_nCS7*/\ - MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1*/\ - MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPMC_WAIT2*/\ - MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_WAIT3*/\ - MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ - MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ - MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ - MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ - MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ - MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ - MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ - MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ - /* DSS */\ - MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ - MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ - MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ - MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ - MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\ - MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\ - MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\ - MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\ - MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\ - MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\ - MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ - MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ - MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ - MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ - MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ - MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ - MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ - MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ - MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ - MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ - MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ - MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ - MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ - MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ - MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ - MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ - MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ - MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ - /* CAMERA */\ - MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS */\ - MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS */\ - MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\ - MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\ - MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ - MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\ - MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\ - MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\ - MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\ - MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\ - MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\ - MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\ - MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\ - MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\ - MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\ - MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\ - MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\ - MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ - MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ - MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ - MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ - MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ - MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\ - MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\ - /* Audio Interface */\ - MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ - MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\ - MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\ - MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ - /* MMC Slot */\ - MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ - MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ - MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ - MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ - MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ - MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ - MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ - MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ - MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ - MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ - /* Expansion Header */\ - MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\ - MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M4)) /*GPIO_131*/\ - MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132*/\ - MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133*/\ - MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) /*GPIO_134*/\ - MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4)) /*GPIO_135*/\ - MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M4)) /*GPIO_136*/\ - MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\ - MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M4)) /*GPIO_138*/\ - MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\ - MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M4)) /*GPIO_140*/\ - MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M4)) /*GPIO_141*/\ - MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_142*/\ - MUX_VAL(CP(MCBSP3_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_143*/\ - MUX_VAL(CP(UART2_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_144*/\ - MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_145*/\ - MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M4)) /*GPIO_146*/\ - MUX_VAL(CP(UART2_RX), (IDIS | PTD | DIS | M4)) /*GPIO_147*/\ - MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*GPIO_148*/\ - MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/ \ - MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/ \ - MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*GPIO_151*/\ - MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M1)) /*GPIO_152*/\ - MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M1)) /*GPIO_153*/\ - MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M1)) /*GPIO_154*/\ - MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M1)) /*GPIO_155*/\ - MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\ - MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M4)) /*GPIO_157*/\ - MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M4)) /*GPIO_158*/\ - MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\ - MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*GPIO_160*/\ - MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_161*/\ - MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162*/\ - /* Serial Interface */\ - MUX_VAL(CP(UART3_CTS_RCTX), (IDIS | PTD | EN | M4)) /*GPIO_163 - LED2*/\ - MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTU | EN | M4)) /*GPIO_164 - LED3*/\ - MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ - MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ - /* Host USB0 */\ - MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ - MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ - MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\ - MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\ - MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA0*/\ - MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA1*/\ - MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA2*/\ - MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA3*/\ - MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA4*/\ - MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA5*/\ - MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA6*/\ - MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\ - MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ - MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ - MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL*/\ - MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA*/\ - MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ - MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ - MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ - MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ - MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)) /*HDQ_SIO*/\ - MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M4)) /*GPIO_171*/\ - MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M4)) /*GPIO_172*/\ - MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*MCSPI1_SOMI*/\ - MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | DIS | M0)) /*MCSPI1_CS0*/\ - MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | DIS | M0)) /*MCSPI1_CS1*/\ - MUX_VAL(CP(MCSPI1_CS2), (IDIS | PTD | DIS | M4)) /*GPIO_176*/\ - /* USB EHCI (port 2) */\ - MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)) /*HSUSB2_DATA2*/\ - MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) /*HSUSB2_DATA7*/\ - MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) /*HSUSB2_DATA4*/\ - MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) /*HSUSB2_DATA5*/\ - MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M0)) /*HSUSB2_DATA6*/\ - MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M0)) /*HSUSB2_DATA3*/\ - /*Control and debug */\ - MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ - MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ - MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ - MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\ - MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3*/\ - MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4*/\ - MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\ - MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\ - MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 - BOOTMODE*/\ - MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/ \ - MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ - MUX_VAL(CP(SYS_CLKOUT1), (IDIS | PTD | EN | M0)) /*SYS_CLKOUT1*/\ - MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTU | EN | M4)) /*GPIO_186 - LED1*/\ - MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTD | DIS | M4)) /*GPIO_12*/\ - MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | EN | M4)) /*GPIO_13*/\ - MUX_VAL(CP(ETK_D0_ES2), (IDIS | PTU | EN | M1)) /*SPI3_SIMO*/\ - MUX_VAL(CP(ETK_D1_ES2), (IDIS | PTU | EN | M1)) /*SPI3_SOMI*/\ - MUX_VAL(CP(ETK_D2_ES2), (IDIS | PTU | EN | M1)) /*SPI3_CS0*/\ - MUX_VAL(CP(ETK_D3_ES2), (IDIS | PTU | EN | M1)) /*SPI3_CLK*/\ - MUX_VAL(CP(ETK_D4_ES2), (IDIS | PTU | EN | M4)) /*GPIO_18*/\ - MUX_VAL(CP(ETK_D5_ES2), (IDIS | PTU | EN | M4)) /*GPIO_19*/\ - MUX_VAL(CP(ETK_D6_ES2), (IDIS | PTU | EN | M4)) /*GPIO_20*/\ - MUX_VAL(CP(ETK_D7_ES2), (IDIS | PTU | EN | M1)) /*SPI3_CS1*/\ - MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | DIS | M4)) /*MSECURE*/\ - MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | EN | M4)) /*GPIO_23*/\ - /*HSUSB2 */\ - MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTU | EN | M4)) /*GPIO_24*/\ - MUX_VAL(CP(ETK_D11_ES2), (IEN | PTU | EN | M4)) /*GPIO_25*/\ - MUX_VAL(CP(ETK_D12_ES2), (IEN | PTU | EN | M4)) /*GPIO_26*/\ - MUX_VAL(CP(ETK_D13_ES2), (IEN | PTU | EN | M4)) /*GPIO_27*/\ - MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | EN | M4)) /*GPIO_28*/\ - MUX_VAL(CP(ETK_D15_ES2), (IEN | PTU | EN | M4)) /*GPIO_29*/\ - /* */\ - MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*D2D_MCAD1*/\ - MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*D2D_MCAD2*/\ - MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*D2D_MCAD3*/\ - MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*D2D_MCAD4*/\ - MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*D2D_MCAD5*/\ - MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*D2D_MCAD6*/\ - MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*D2D_MCAD7*/\ - MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*D2D_MCAD8*/\ - MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*D2D_MCAD9*/\ - MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*D2D_MCAD10*/\ - MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*D2D_MCAD11*/\ - MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*D2D_MCAD12*/\ - MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*D2D_MCAD13*/\ - MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*D2D_MCAD14*/\ - MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*D2D_MCAD15*/\ - MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*D2D_MCAD16*/\ - MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*D2D_MCAD17*/\ - MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*D2D_MCAD18*/\ - MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*D2D_MCAD19*/\ - MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*D2D_MCAD20*/\ - MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*D2D_MCAD21*/\ - MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*D2D_MCAD22*/\ - MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*D2D_MCAD23*/\ - MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*D2D_MCAD24*/\ - MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*D2D_MCAD25*/\ - MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*D2D_MCAD26*/\ - MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*D2D_MCAD27*/\ - MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*D2D_MCAD28*/\ - MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*D2D_MCAD29*/\ - MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*D2D_MCAD30*/\ - MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*D2D_MCAD31*/\ - MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*D2D_MCAD32*/\ - MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*D2D_MCAD33*/\ - MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*D2D_MCAD34*/\ - MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*D2D_MCAD35*/\ - MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*D2D_MCAD36*/\ - MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*D2D_clk26mi*/\ - MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*D2D_nrespwron*/\ - MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*D2D_nreswarm */\ - MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*D2D_arm9nirq */\ - MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*D2D_uma2p6fiq*/\ - MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*D2D_spint*/\ - MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*D2D_frint*/\ - MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*D2D_dmareq0*/\ - MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*D2D_dmareq1*/\ - MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*D2D_dmareq2*/\ - MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*D2D_dmareq3*/\ - MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*D2D_n3gtrst*/\ - MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*D2D_n3gtdi*/\ - MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*D2D_n3gtdo*/\ - MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*D2D_n3gtms*/\ - MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*D2D_n3gtck*/\ - MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*D2D_n3grtck*/\ - MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*D2D_mstdby*/\ - MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*D2D_swakeup*/\ - MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*D2D_idlereq*/\ - MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*D2D_idleack*/\ - MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*D2D_mwrite*/\ - MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*D2D_swrite*/\ - MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*D2D_mread*/\ - MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*D2D_sread*/\ - MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*D2D_mbusflag*/\ - MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*D2D_sbusflag*/\ - MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ - MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/ - -#endif diff --git a/configs/tricorder_defconfig b/configs/tricorder_defconfig deleted file mode 100644 index 6e511a1b13b6..000000000000 --- a/configs/tricorder_defconfig +++ /dev/null @@ -1,56 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SYS_TEXT_BASE=0x80100000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_ENV_SIZE=0x4000 -CONFIG_ENV_OFFSET=0x120000 -CONFIG_SPL_TEXT_BASE=0x40200000 -CONFIG_TARGET_TRICORDER=y -CONFIG_SPL=y -CONFIG_ENV_OFFSET_REDUND=0x2A0000 -CONFIG_BOOTDELAY=0 -CONFIG_SILENT_CONSOLE=y -CONFIG_SPL_NAND_DRIVERS=y -CONFIG_SPL_NAND_ECC=y -CONFIG_SPL_NAND_SIMPLE=y -CONFIG_SPL_NAND_BASE=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="OMAP3 Tricorder # " -# CONFIG_CMD_IMI is not set -CONFIG_CMD_EEPROM=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_NAND_LOCK_UNLOCK=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(SPL),1m(u-boot),384k(u-boot-env1),1152k(mtdoops),384k(u-boot-env2),5m(kernel),2m(fdt),-(ubi)" -CONFIG_CMD_UBI=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set -CONFIG_LED_STATUS=y -CONFIG_LED_STATUS0=y -CONFIG_LED_STATUS_BIT=1 -CONFIG_LED_STATUS_STATE=2 -CONFIG_LED_STATUS1=y -CONFIG_LED_STATUS_BIT1=2 -CONFIG_LED_STATUS_STATE1=2 -CONFIG_LED_STATUS2=y -CONFIG_LED_STATUS_BIT2=4 -CONFIG_LED_STATUS_STATE2=2 -CONFIG_LED_STATUS_CMD=y -CONFIG_TWL4030_LED=y -CONFIG_MMC_OMAP_HS=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_CONS_INDEX=3 -CONFIG_SYS_NS16550=y -CONFIG_BCH=y -CONFIG_PANIC_HANG=y -CONFIG_OF_LIBFDT=y diff --git a/configs/tricorder_flash_defconfig b/configs/tricorder_flash_defconfig deleted file mode 100644 index 0ade2d35ca11..000000000000 --- a/configs/tricorder_flash_defconfig +++ /dev/null @@ -1,52 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SYS_TEXT_BASE=0x80100000 -CONFIG_NR_DRAM_BANKS=2 -CONFIG_ENV_SIZE=0x4000 -CONFIG_SPL_TEXT_BASE=0x40200000 -CONFIG_TARGET_TRICORDER=y -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="FLASHCARD" -CONFIG_BOOTDELAY=0 -CONFIG_SILENT_CONSOLE=y -CONFIG_SPL_NAND_DRIVERS=y -CONFIG_SPL_NAND_ECC=y -CONFIG_SPL_NAND_SIMPLE=y -CONFIG_SPL_NAND_BASE=y -CONFIG_HUSH_PARSER=y -# CONFIG_CMD_IMI is not set -CONFIG_CMD_EEPROM=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_NAND_LOCK_UNLOCK=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" -CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(SPL),1m(u-boot),384k(u-boot-env1),1152k(mtdoops),384k(u-boot-env2),5m(kernel),2m(fdt),-(ubi)" -CONFIG_CMD_UBI=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -# CONFIG_NET is not set -CONFIG_LED_STATUS=y -CONFIG_LED_STATUS0=y -CONFIG_LED_STATUS_BIT=1 -CONFIG_LED_STATUS_STATE=2 -CONFIG_LED_STATUS1=y -CONFIG_LED_STATUS_BIT1=2 -CONFIG_LED_STATUS_STATE1=2 -CONFIG_LED_STATUS2=y -CONFIG_LED_STATUS_BIT2=4 -CONFIG_LED_STATUS_STATE2=2 -CONFIG_LED_STATUS_CMD=y -CONFIG_TWL4030_LED=y -CONFIG_MMC_OMAP_HS=y -CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y -CONFIG_CONS_INDEX=3 -CONFIG_SYS_NS16550=y -CONFIG_BCH=y -CONFIG_PANIC_HANG=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h deleted file mode 100644 index 55f25857eb3d..000000000000 --- a/include/configs/tricorder.h +++ /dev/null @@ -1,236 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2006-2008 - * Texas Instruments. - * Richard Woodruff <r-woodruff2@ti.com> - * Syed Mohammed Khasim <x0khasim@ti.com> - * - * (C) Copyright 2012 - * Corscience GmbH & Co. KG - * Thomas Weber <weber@corscience.de> - * - * Configuration settings for the Tricorder board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MACH_TYPE MACH_TYPE_TRICORDER -/* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80100000 should not be used for any - * other needs. - */ - -#include <asm/arch/cpu.h> /* get chip and board defs */ -#include <asm/arch/omap.h> - -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_REVISION_TAG - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (1024*1024) - -/* Hardware drivers */ - -/* NS16550 Configuration */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -/* select serial console configuration */ -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} - -/* I2C */ -#define CONFIG_SYS_I2C - - -/* EEPROM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_BUS_NUM 1 - -/* TWL4030 */ - -/* Board NAND Info */ -#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ - /* to access nand at */ - /* CS0 */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ - /* devices */ -#define CONFIG_SYS_NAND_MAX_OOBFREE 2 -#define CONFIG_SYS_NAND_MAX_ECCPOS 56 - -/* needed for ubi */ - -/* Environment information (this is the common part) */ - - -/* hang() the board on panic() */ - -/* environment placement (for NAND), is different for FLASHCARD but does not - * harm there */ -#define CONFIG_ENV_RANGE (384 << 10) /* allow badblocks in env */ - -/* the loadaddr is the same as CONFIG_SYS_LOAD_ADDR, unfortunately the defiend - * value can not be used here! */ -#define CONFIG_LOADADDR 0x82000000 - -#define CONFIG_COMMON_ENV_SETTINGS \ - "console=ttyO2,115200n8\0" \ - "mmcdev=0\0" \ - "vram=3M\0" \ - "defaultdisplay=lcd\0" \ - "kernelopts=mtdoops.mtddev=3\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ - "commonargs=" \ - "setenv bootargs console=${console} " \ - "${mtdparts} " \ - "${kernelopts} " \ - "vt.global_cursor_default=0 " \ - "vram=${vram} " \ - "omapdss.def_disp=${defaultdisplay}\0" - -#define CONFIG_BOOTCOMMAND "run autoboot" - -/* specific environment settings for different use cases - * FLASHCARD: used to run a rdimage from sdcard to program the device - * 'NORMAL': used to boot kernel from sdcard, nand, ... - * - * The main aim for the FLASHCARD skin is to have an embedded environment - * which will not be influenced by any data already on the device. - */ -#ifdef CONFIG_FLASHCARD -/* the rdaddr is 16 MiB before the loadaddr */ -#define CONFIG_ENV_RDADDR "rdaddr=0x81000000\0" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_COMMON_ENV_SETTINGS \ - CONFIG_ENV_RDADDR \ - "autoboot=" \ - "run commonargs; " \ - "setenv bootargs ${bootargs} " \ - "flashy_updateimg=/dev/mmcblk0p1:corscience_update.img " \ - "rdinit=/sbin/init; " \ - "mmc dev ${mmcdev}; mmc rescan; " \ - "fatload mmc ${mmcdev} ${loadaddr} uImage; " \ - "fatload mmc ${mmcdev} ${rdaddr} uRamdisk; " \ - "bootm ${loadaddr} ${rdaddr}\0" - -#else /* CONFIG_FLASHCARD */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_COMMON_ENV_SETTINGS \ - "mmcargs=" \ - "run commonargs; " \ - "setenv bootargs ${bootargs} " \ - "root=/dev/mmcblk0p2 " \ - "rootwait " \ - "rw\0" \ - "nandargs=" \ - "run commonargs; " \ - "setenv bootargs ${bootargs} " \ - "root=ubi0:root " \ - "ubi.mtd=7 " \ - "rootfstype=ubifs " \ - "ro\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source ${loadaddr}\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "loaduimage_ubi=ubi part ubi; " \ - "ubifsmount ubi:root; " \ - "ubifsload ${loadaddr} /boot/uImage\0" \ - "loaduimage_nand=nand read ${loadaddr} kernel 0x500000\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "run loaduimage_nand; " \ - "bootm ${loadaddr}\0" \ - "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run nandboot; " \ - "fi; " \ - "fi; " \ - "else run nandboot; fi\0" - -#endif /* CONFIG_FLASHCARD */ - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000) - -/* - * OMAP3 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -/* Physical Memory Map */ -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - -/* NAND and environment organization */ -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -/* Defines for SPL */ - -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ - CONFIG_SPL_TEXT_BASE) - -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/ -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 - -/* NAND boot config */ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \ - 13, 14, 16, 17, 18, 19, 20, 21, 22, \ - 23, 24, 25, 26, 27, 28, 30, 31, 32, \ - 33, 34, 35, 36, 37, 38, 39, 40, 41, \ - 42, 44, 45, 46, 47, 48, 49, 50, 51, \ - 52, 53, 54, 55, 56} - -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 13 -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW - -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x100000 - -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ - -#endif /* __CONFIG_H */

[24/57] arm: Remove tricorder board

Commit Message

Comments

Patch