Message ID | 20201031162013.31403-2-alpernebiyasak@gmail.com |
---|---|
State | Accepted |
Commit | eb69d797d36788ede4304b42bb981c61aa1c2ad3 |
Delegated to: | Jagannadha Sutradharudu Teki |
Headers | show |
Series | [1/2] mtd: spi-nor: Correct spi-nor-ids.c license to GPL-2.0 | expand |
On Sat, Oct 31, 2020 at 9:50 PM Alper Nebi Yasak <alpernebiyasak@gmail.com> wrote: > > Add GD25LQ24C 64Mbit chip to spi-nor id table. This chip is used on > rk3399-gru-kevin: > > => sf probe > SF: Detected gd25lq64c with page size 256 Bytes, erase size 4 KiB, total 8 MiB > => sf erase 0x600000 0x200000 > SF: 2097152 bytes @ 0x600000 Erased: OK > => sf test 0x700000 0x1000 > SPI flash test: > 0 erase: 52 ticks, 76 KiB/s 0.608 Mbps > 1 check: 5 ticks, 800 KiB/s 6.400 Mbps > 2 write: 14 ticks, 285 KiB/s 2.280 Mbps > 3 read: 3 ticks, 1333 KiB/s 10.664 Mbps > Test passed > 0 erase: 52 ticks, 76 KiB/s 0.608 Mbps > 1 check: 5 ticks, 800 KiB/s 6.400 Mbps > 2 write: 14 ticks, 285 KiB/s 2.280 Mbps > 3 read: 3 ticks, 1333 KiB/s 10.664 Mbps > > The values are the same as in Linux, except adjusted for the U-Boot > definition of INFO(). > > Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> > --- Applied to u-boot-spi/master
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c index 4de60b0165fd..cc3a54eaf563 100644 --- a/drivers/mtd/spi/spi-nor-ids.c +++ b/drivers/mtd/spi/spi-nor-ids.c @@ -107,6 +107,11 @@ const struct flash_info spi_nor_ids[] = { SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, + { + INFO("gd25lq64c", 0xc86017, 0, 64 * 1024, 128, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) + }, { INFO("gd25q128", 0xc84018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
Add GD25LQ24C 64Mbit chip to spi-nor id table. This chip is used on rk3399-gru-kevin: => sf probe SF: Detected gd25lq64c with page size 256 Bytes, erase size 4 KiB, total 8 MiB => sf erase 0x600000 0x200000 SF: 2097152 bytes @ 0x600000 Erased: OK => sf test 0x700000 0x1000 SPI flash test: 0 erase: 52 ticks, 76 KiB/s 0.608 Mbps 1 check: 5 ticks, 800 KiB/s 6.400 Mbps 2 write: 14 ticks, 285 KiB/s 2.280 Mbps 3 read: 3 ticks, 1333 KiB/s 10.664 Mbps Test passed 0 erase: 52 ticks, 76 KiB/s 0.608 Mbps 1 check: 5 ticks, 800 KiB/s 6.400 Mbps 2 write: 14 ticks, 285 KiB/s 2.280 Mbps 3 read: 3 ticks, 1333 KiB/s 10.664 Mbps The values are the same as in Linux, except adjusted for the U-Boot definition of INFO(). Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> --- This is from Linux's drivers/mtd/spi-nor/gigadevice.c which is GPL-2.0, but the U-Boot file is marked as GPL-2.0+ (which is AFAICT incorrect, see the previous patch). drivers/mtd/spi/spi-nor-ids.c | 5 +++++ 1 file changed, 5 insertions(+)