deleted file mode 100644
@@ -1,50 +0,0 @@
-U-Boot for the NXP i.MX8QXP EVK board
-
-Quick Start
-===========
-
-- Build the ARM Trusted firmware binary
-- Get scfw_tcm.bin and ahab-container.img
-- Build U-Boot
-- Flash the binary into the SD card
-- Boot
-
-Get and Build the ARM Trusted firmware
-======================================
-
-$ git clone https://source.codeaurora.org/external/imx/imx-atf
-$ cd imx-atf/
-$ git checkout origin/imx_4.19.35_1.1.0 -b imx_4.19.35_1.1.0
-$ make PLAT=imx8qx bl31
-
-Get scfw_tcm.bin and ahab-container.img
-==============================
-
-$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.2.7.1.bin
-$ chmod +x imx-sc-firmware-1.2.7.1.bin
-$ ./imx-sc-firmware-1.2.7.1.bin
-$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-2.3.1.bin
-$ chmod +x imx-seco-2.3.1.bin
-$ ./imx-seco-2.3.1.bin
-
-Copy the following binaries to U-Boot folder:
-
-$ cp imx-atf/build/imx8qx/release/bl31.bin .
-$ cp imx-seco-2.3.1/firmware/seco/mx8qx-ahab-container.img ./ahab-container.img
-$ cp imx-sc-firmware-1.2.7.1/mx8qx-mek-scfw-tcm.bin .
-
-Build U-Boot
-============
-$ make imx8qxp_mek_defconfig
-$ make flash.bin
-
-Flash the binary into the SD card
-=================================
-
-Burn the flash.bin binary to SD card offset 32KB:
-
-$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
-
-Boot
-====
-Set Boot switch SW2: 1100.
new file mode 100644
@@ -0,0 +1,66 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+imx8qxp_mek
+===========
+
+U-Boot for the NXP i.MX8QXP EVK board
+
+Quick Start
+-----------
+
+- Build the ARM Trusted firmware binary
+- Get scfw_tcm.bin and ahab-container.img
+- Build U-Boot
+- Flash the binary into the SD card
+- Boot
+
+Get and Build the ARM Trusted firmware
+--------------------------------------
+
+.. code-block:: bash
+
+ $ git clone https://source.codeaurora.org/external/imx/imx-atf
+ $ cd imx-atf/
+ $ git checkout origin/imx_4.19.35_1.1.0 -b imx_4.19.35_1.1.0
+ $ make PLAT=imx8qx bl31
+
+Get scfw_tcm.bin and ahab-container.img
+---------------------------------------
+
+.. code-block:: bash
+
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.2.7.1.bin
+ $ chmod +x imx-sc-firmware-1.2.7.1.bin
+ $ ./imx-sc-firmware-1.2.7.1.bin
+ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-2.3.1.bin
+ $ chmod +x imx-seco-2.3.1.bin
+ $ ./imx-seco-2.3.1.bin
+
+Copy the following binaries to U-Boot folder:
+
+.. code-block:: bash
+
+ $ cp imx-atf/build/imx8qx/release/bl31.bin .
+ $ cp imx-seco-2.3.1/firmware/seco/mx8qx-ahab-container.img ./ahab-container.img
+ $ cp imx-sc-firmware-1.2.7.1/mx8qx-mek-scfw-tcm.bin .
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+ $ make imx8qxp_mek_defconfig
+ $ make flash.bin
+
+Flash the binary into the SD card
+---------------------------------
+
+Burn the flash.bin binary to SD card offset 32KB:
+
+.. code-block:: bash
+
+ $ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
+
+Boot
+----
+Set Boot switch SW2: 1100.
@@ -11,3 +11,4 @@ Freescale
imx8mn_evk
imx8mp_evk
imx8mq_evk
+ imx8qxp_mek
Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Peng Fan <peng.fan@nxp.com> --- board/freescale/imx8qxp_mek/README | 50 ---------------------- doc/board/freescale/imx8qxp_mek.rst | 66 +++++++++++++++++++++++++++++ doc/board/freescale/index.rst | 1 + 3 files changed, 67 insertions(+), 50 deletions(-) delete mode 100644 board/freescale/imx8qxp_mek/README create mode 100644 doc/board/freescale/imx8qxp_mek.rst