diff mbox series

[v3,3/8] mmc: zynq_sdhci: Move macro to the top

Message ID c1aa5ac02cabf69f4e035694ea43faed04771aa3.1603712577.git.michal.simek@xilinx.com
State Accepted
Commit 9851f50d3d8e8a933a072b11f7f497846b068fb8
Delegated to: Michal Simek
Headers show
Series mmc: zynqmp_sdhci: Add support for Tap delay | expand

Commit Message

Michal Simek Oct. 26, 2020, 11:42 a.m. UTC 
Just group macros below headers. Other patches will be using this location
too.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---

(no changes since v1)

 drivers/mmc/zynq_sdhci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Jaehoon Chung Oct. 26, 2020, 9:38 p.m. UTC | #1 
On 10/26/20 8:42 PM, Michal Simek wrote:
> Just group macros below headers. Other patches will be using this location
> too.
> 
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
> Reviewed-by: Peng Fan <peng.fan@nxp.com>

Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>

Best Regards,
Jaehoon Chung

> ---
> 
> (no changes since v1)
> 
>  drivers/mmc/zynq_sdhci.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
> index 4f62bd008d24..998a38450680 100644
> --- a/drivers/mmc/zynq_sdhci.c
> +++ b/drivers/mmc/zynq_sdhci.c
> @@ -19,6 +19,8 @@
>  #include <sdhci.h>
>  #include <zynqmp_tap_delay.h>
>  
> +#define SDHCI_TUNING_LOOP_COUNT		40
> +
>  struct arasan_sdhci_plat {
>  	struct mmc_config cfg;
>  	struct mmc mmc;
> @@ -46,8 +48,6 @@ static const u8 mode2timing[] = {
>  	[MMC_HS_200] = MMC_TIMING_MMC_HS200,
>  };
>  
> -#define SDHCI_TUNING_LOOP_COUNT	40
> -
>  static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u8 deviceid)
>  {
>  	u16 clk;
>
diff mbox series

Patch

diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index 4f62bd008d24..998a38450680 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -19,6 +19,8 @@ 
 #include <sdhci.h>
 #include <zynqmp_tap_delay.h>
 
+#define SDHCI_TUNING_LOOP_COUNT		40
+
 struct arasan_sdhci_plat {
 	struct mmc_config cfg;
 	struct mmc mmc;
@@ -46,8 +48,6 @@  static const u8 mode2timing[] = {
 	[MMC_HS_200] = MMC_TIMING_MMC_HS200,
 };
 
-#define SDHCI_TUNING_LOOP_COUNT	40
-
 static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u8 deviceid)
 {
 	u16 clk;