deleted file mode 100644
@@ -1,55 +0,0 @@
-The biggest problem when trying to compile U-Boot with clang is that
-almost all archs rely on storing gd in a global register and clang user
-manual states: "clang does not support global register variables; this
-is unlikely to be implemented soon because it requires additional LLVM
-backend support."
-
-Since version 3.4 the ARM backend can be instructed to leave r9 alone.
-Global registers themselves are not supported so some inline assembly is
-used to get its value. This does lead to larger code then strictly
-necessary, but at least works.
-
-NOTE: target compilation only work for _some_ ARM boards at the moment.
-Also AArch64 is not supported currently due to a lack of private libgcc
-support. Boards which reassign gd in c will also fail to compile, but there is
-in no strict reason to do so in the ARM world, since crt0.S takes care of this.
-These assignments can be avoided by changing the init calls but this is not in
-mainline yet.
-
-Debian (based)
---------------
-Binary packages can be installed as usual, e.g.:
-sudo apt-get install clang
-
-Note that we still use binutils for some tools so we must continue to set
-CROSS_COMPILE. To compile U-Boot with clang on linux without IAS use e.g.:
-make HOSTCC=clang rpi_2_defconfig
-make HOSTCC=clang CROSS_COMPILE=arm-linux-gnueabi- \
- CC="clang -target arm-linux-gnueabi" -j8
-
-It can also be used to compile sandbox:
-make HOSTCC=clang sandbox_defconfig
-make HOSTCC=clang CC=clang -j8
-
-FreeBSD 11 (Current):
---------------------
-Since llvm 3.4 is currently in the base system, the integrated as is
-incapable of building U-Boot. Therefore gas from devel/arm-gnueabi-binutils
-is used instead. It needs a symlinks to be picked up correctly though:
-
-ln -s /usr/local/bin/arm-gnueabi-freebsd-as /usr/bin/arm-freebsd-eabi-as
-
-# The following commands compile U-Boot using the clang xdev toolchain.
-# NOTE: CROSS_COMPILE and target differ on purpose!
-export CROSS_COMPILE=arm-gnueabi-freebsd-
-gmake rpi_2_defconfig
-gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd" -j8
-
-Given that U-Boot will default to gcc, above commands can be
-simplified with a simple wrapper script, listed below.
-
-/usr/local/bin/arm-gnueabi-freebsd-gcc
----
-#!/bin/sh
-
-exec clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd "$@"
new file mode 100644
@@ -0,0 +1,76 @@
+Building with Clang
+===================
+
+The biggest problem when trying to compile U-Boot with Clang is that almost all
+archs rely on storing gd in a global register and the Clang 3.5 user manual
+states: "Clang does not support global register variables; this is unlikely to
+be implemented soon because it requires additional LLVM backend support."
+
+The ARM backend can be instructed not to use the r9 and x18 registers using
+-ffixed-r9 or -ffixed-x18 respectively. As global registers themselves are not
+supported inline assembly is needed to get and set the r9 or x18 value. This
+leads to larger code then strictly necessary, but at least works.
+
+**NOTE:** target compilation only work for _some_ ARM boards at the moment.
+Also AArch64 is not supported currently due to a lack of private libgcc
+support. Boards which reassign gd in c will also fail to compile, but there is
+in no strict reason to do so in the ARM world, since crt0.S takes care of this.
+These assignments can be avoided by changing the init calls but this is not in
+mainline yet.
+
+
+Debian based
+------------
+
+Required packages can be installed via apt, e.g.
+
+.. code-block:: bash
+
+ sudo apt-get install clang
+
+Note that we still use binutils for some tools so we must continue to set
+CROSS_COMPILE. To compile U-Boot with Clang on Linux without IAS use e.g.
+
+.. code-block:: bash
+
+ make HOSTCC=clang rpi_2_defconfig
+ make HOSTCC=clang CROSS_COMPILE=arm-linux-gnueabi- \
+ CC="clang -target arm-linux-gnueabi" -j8
+
+It can also be used to compile sandbox:
+
+.. code-block:: bash
+
+ make HOSTCC=clang sandbox_defconfig
+ make HOSTCC=clang CC=clang -j8
+
+
+FreeBSD 11
+----------
+
+Since llvm 3.4 is currently in the base system, the integrated assembler as
+is incapable of building U-Boot. Therefore gas from devel/arm-gnueabi-binutils
+is used instead. It needs a symlink to be picked up correctly though:
+
+.. code-block:: bash
+
+ ln -s /usr/local/bin/arm-gnueabi-freebsd-as /usr/bin/arm-freebsd-eabi-as
+
+The following commands compile U-Boot using the Clang xdev toolchain.
+
+**NOTE:** CROSS_COMPILE and target differ on purpose!
+
+.. code-block:: bash
+
+ export CROSS_COMPILE=arm-gnueabi-freebsd-
+ gmake rpi_2_defconfig
+ gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd" -j8
+
+Given that U-Boot will default to gcc, above commands can be
+simplified with a simple wrapper script - saved as
+/usr/local/bin/arm-gnueabi-freebsd-gcc - listed below:
+
+.. code-block:: bash
+
+ #!/bin/sh
+ exec clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd "$@"
@@ -6,4 +6,5 @@ Build U-Boot
.. toctree::
:maxdepth: 2
+ clang
tools
* Move README.clang to doc/build/clang.rst and reformat as reStructeredText. * Indicate that -ffixed-r9 and -ffixed-x18 are used to reserve registers for gd. * Minor editing. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> --- doc/README.clang | 55 -------------------------------- doc/build/clang.rst | 76 +++++++++++++++++++++++++++++++++++++++++++++ doc/build/index.rst | 1 + 3 files changed, 77 insertions(+), 55 deletions(-) delete mode 100644 doc/README.clang create mode 100644 doc/build/clang.rst -- 2.26.2