Message ID | 20200702084733.2032531-5-sr@denx.de |
---|---|
State | Superseded |
Delegated to: | Marek Vasut |
Headers | show |
Series | [v1,1/4] usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu) | expand |
Hi Stefan, On Thu, Jul 2, 2020 at 4:47 PM Stefan Roese <sr@denx.de> wrote: > > Some platforms, like MIPS Octeon, use mapped addresses (virtual address > != physical address). On these platforms we need to make sure, that the > local virtual addresses are converted to physical (DMA) addresses for > the xHCI controller. This patch adds the missing virt_to_phys() calls, > so that the correct addresses are used. > > Signed-off-by: Stefan Roese <sr@denx.de> > Cc: Bin Meng <bmeng.cn@gmail.com> > Cc: Marek Vasut <marex@denx.de> > > --- > > drivers/usb/host/xhci-mem.c | 19 +++++++++---------- > drivers/usb/host/xhci-ring.c | 8 ++++---- > drivers/usb/host/xhci.c | 3 +-- > 3 files changed, 14 insertions(+), 16 deletions(-) > > diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c > index 3b805ecb9e..874caf4761 100644 > --- a/drivers/usb/host/xhci-mem.c > +++ b/drivers/usb/host/xhci-mem.c > @@ -224,7 +224,7 @@ static void xhci_link_segments(struct xhci_segment *prev, > return; > prev->next = next; > if (link_trbs) { > - val_64 = (uintptr_t)next->trbs; > + val_64 = virt_to_phys(next->trbs); > prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = > cpu_to_le64(val_64); > > @@ -484,7 +484,7 @@ int xhci_alloc_virt_device(struct xhci_ctrl *ctrl, unsigned int slot_id) > /* Allocate endpoint 0 ring */ > virt_dev->eps[0].ring = xhci_ring_alloc(1, true); > > - byte_64 = (uintptr_t)(virt_dev->out_ctx->bytes); > + byte_64 = virt_to_phys(virt_dev->out_ctx->bytes); > > /* Point to output device context in dcbaa. */ > ctrl->dcbaa->dev_context_ptrs[slot_id] = cpu_to_le64(byte_64); > @@ -509,7 +509,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, > uint64_t val_64; > uint64_t trb_64; > uint32_t val; > - unsigned long deq; > + uint64_t deq; This change seems unnecessary? > int i; > struct xhci_segment *seg; > > @@ -521,7 +521,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, > return -ENOMEM; > } > > - val_64 = (uintptr_t)ctrl->dcbaa; > + val_64 = virt_to_phys(ctrl->dcbaa); > /* Set the pointer in DCBAA register */ > xhci_writeq(&hcor->or_dcbaap, val_64); > > @@ -529,7 +529,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, > ctrl->cmd_ring = xhci_ring_alloc(1, true); > > /* Set the address in the Command Ring Control register */ > - trb_64 = (uintptr_t)ctrl->cmd_ring->first_seg->trbs; > + trb_64 = virt_to_phys(ctrl->cmd_ring->first_seg->trbs); > val_64 = xhci_readq(&hcor->or_crcr); > val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) | > (trb_64 & (u64) ~CMD_RING_RSVD_BITS) | > @@ -559,8 +559,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, > for (val = 0, seg = ctrl->event_ring->first_seg; > val < ERST_NUM_SEGS; > val++) { > - trb_64 = 0; > - trb_64 = (uintptr_t)seg->trbs; > + trb_64 = virt_to_phys(seg->trbs); > struct xhci_erst_entry *entry = &ctrl->erst.entries[val]; > entry->seg_addr = cpu_to_le64(trb_64); > entry->seg_size = cpu_to_le32(TRBS_PER_SEGMENT); > @@ -570,7 +569,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, > xhci_flush_cache((uintptr_t)ctrl->erst.entries, > ERST_NUM_SEGS * sizeof(struct xhci_erst_entry)); > > - deq = (unsigned long)ctrl->event_ring->dequeue; > + deq = virt_to_phys(ctrl->event_ring->dequeue); > > /* Update HC event ring dequeue pointer */ > xhci_writeq(&ctrl->ir_set->erst_dequeue, > @@ -585,7 +584,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, > /* this is the event ring segment table pointer */ > val_64 = xhci_readq(&ctrl->ir_set->erst_base); > val_64 &= ERST_PTR_MASK; > - val_64 |= ((uintptr_t)(ctrl->erst.entries) & ~ERST_PTR_MASK); > + val_64 |= virt_to_phys(ctrl->erst.entries) & ~ERST_PTR_MASK; > > xhci_writeq(&ctrl->ir_set->erst_base, val_64); > > @@ -853,7 +852,7 @@ void xhci_setup_addressable_virt_dev(struct xhci_ctrl *ctrl, > cpu_to_le32(((0 & MAX_BURST_MASK) << MAX_BURST_SHIFT) | > ((3 & ERROR_COUNT_MASK) << ERROR_COUNT_SHIFT)); > > - trb_64 = (uintptr_t)virt_dev->eps[0].ring->first_seg->trbs; > + trb_64 = virt_to_phys(virt_dev->eps[0].ring->first_seg->trbs); > ep0_ctx->deq = cpu_to_le64(trb_64 | virt_dev->eps[0].ring->cycle_state); > > /* > diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c > index 86aeaab412..092ed6eaf1 100644 > --- a/drivers/usb/host/xhci-ring.c > +++ b/drivers/usb/host/xhci-ring.c > @@ -275,7 +275,7 @@ void xhci_queue_command(struct xhci_ctrl *ctrl, u8 *ptr, u32 slot_id, > u32 ep_index, trb_type cmd) > { > u32 fields[4]; > - u64 val_64 = (uintptr_t)ptr; > + u64 val_64 = virt_to_phys(ptr); > > BUG_ON(prepare_ring(ctrl, ctrl->cmd_ring, EP_STATE_RUNNING)); > > @@ -399,7 +399,7 @@ void xhci_acknowledge_event(struct xhci_ctrl *ctrl) > > /* Inform the hardware */ > xhci_writeq(&ctrl->ir_set->erst_dequeue, > - (uintptr_t)ctrl->event_ring->dequeue | ERST_EHB); > + virt_to_phys(ctrl->event_ring->dequeue) | ERST_EHB); > } > > /** > @@ -577,7 +577,7 @@ int xhci_bulk_tx(struct usb_device *udev, unsigned long pipe, > u64 addr; > int ret; > u32 trb_fields[4]; > - u64 val_64 = (uintptr_t)buffer; > + u64 val_64 = virt_to_phys(buffer); > > debug("dev=%p, pipe=%lx, buffer=%p, length=%d\n", > udev, pipe, buffer, length); > @@ -876,7 +876,7 @@ int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe, > if (length > 0) { > if (req->requesttype & USB_DIR_IN) > field |= TRB_DIR_IN; > - buf_64 = (uintptr_t)buffer; > + buf_64 = virt_to_phys(buffer); > > trb_fields[0] = lower_32_bits(buf_64); > trb_fields[1] = upper_32_bits(buf_64); > diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c > index ebd2954571..f89e274b0d 100644 > --- a/drivers/usb/host/xhci.c > +++ b/drivers/usb/host/xhci.c > @@ -600,8 +600,7 @@ static int xhci_set_configuration(struct usb_device *udev) > cpu_to_le32(MAX_BURST(max_burst) | > ERROR_COUNT(err_count)); > > - trb_64 = (uintptr_t) > - virt_dev->eps[ep_index].ring->enqueue; > + trb_64 = virt_to_phys(virt_dev->eps[ep_index].ring->enqueue); > ep_ctx[ep_index]->deq = cpu_to_le64(trb_64 | > virt_dev->eps[ep_index].ring->cycle_state); > > -- Other than above, Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Regards, Bin
Hi Bin, On 17.07.20 07:57, Bin Meng wrote: > Hi Stefan, > > On Thu, Jul 2, 2020 at 4:47 PM Stefan Roese <sr@denx.de> wrote: >> >> Some platforms, like MIPS Octeon, use mapped addresses (virtual address >> != physical address). On these platforms we need to make sure, that the >> local virtual addresses are converted to physical (DMA) addresses for >> the xHCI controller. This patch adds the missing virt_to_phys() calls, >> so that the correct addresses are used. >> >> Signed-off-by: Stefan Roese <sr@denx.de> >> Cc: Bin Meng <bmeng.cn@gmail.com> >> Cc: Marek Vasut <marex@denx.de> >> >> --- >> >> drivers/usb/host/xhci-mem.c | 19 +++++++++---------- >> drivers/usb/host/xhci-ring.c | 8 ++++---- >> drivers/usb/host/xhci.c | 3 +-- >> 3 files changed, 14 insertions(+), 16 deletions(-) >> >> diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c >> index 3b805ecb9e..874caf4761 100644 >> --- a/drivers/usb/host/xhci-mem.c >> +++ b/drivers/usb/host/xhci-mem.c >> @@ -224,7 +224,7 @@ static void xhci_link_segments(struct xhci_segment *prev, >> return; >> prev->next = next; >> if (link_trbs) { >> - val_64 = (uintptr_t)next->trbs; >> + val_64 = virt_to_phys(next->trbs); >> prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = >> cpu_to_le64(val_64); >> >> @@ -484,7 +484,7 @@ int xhci_alloc_virt_device(struct xhci_ctrl *ctrl, unsigned int slot_id) >> /* Allocate endpoint 0 ring */ >> virt_dev->eps[0].ring = xhci_ring_alloc(1, true); >> >> - byte_64 = (uintptr_t)(virt_dev->out_ctx->bytes); >> + byte_64 = virt_to_phys(virt_dev->out_ctx->bytes); >> >> /* Point to output device context in dcbaa. */ >> ctrl->dcbaa->dev_context_ptrs[slot_id] = cpu_to_le64(byte_64); >> @@ -509,7 +509,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, >> uint64_t val_64; >> uint64_t trb_64; >> uint32_t val; >> - unsigned long deq; >> + uint64_t deq; > > This change seems unnecessary? In most (all other?) places, the variable containing these 64 bit addresses has the type uint64_t in this driver. So I wanted to make the code more consistant here. Or do you see a problem with this change? >> int i; >> struct xhci_segment *seg; >> >> @@ -521,7 +521,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, >> return -ENOMEM; >> } >> >> - val_64 = (uintptr_t)ctrl->dcbaa; >> + val_64 = virt_to_phys(ctrl->dcbaa); >> /* Set the pointer in DCBAA register */ >> xhci_writeq(&hcor->or_dcbaap, val_64); >> >> @@ -529,7 +529,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, >> ctrl->cmd_ring = xhci_ring_alloc(1, true); >> >> /* Set the address in the Command Ring Control register */ >> - trb_64 = (uintptr_t)ctrl->cmd_ring->first_seg->trbs; >> + trb_64 = virt_to_phys(ctrl->cmd_ring->first_seg->trbs); >> val_64 = xhci_readq(&hcor->or_crcr); >> val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) | >> (trb_64 & (u64) ~CMD_RING_RSVD_BITS) | >> @@ -559,8 +559,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, >> for (val = 0, seg = ctrl->event_ring->first_seg; >> val < ERST_NUM_SEGS; >> val++) { >> - trb_64 = 0; >> - trb_64 = (uintptr_t)seg->trbs; >> + trb_64 = virt_to_phys(seg->trbs); >> struct xhci_erst_entry *entry = &ctrl->erst.entries[val]; >> entry->seg_addr = cpu_to_le64(trb_64); >> entry->seg_size = cpu_to_le32(TRBS_PER_SEGMENT); >> @@ -570,7 +569,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, >> xhci_flush_cache((uintptr_t)ctrl->erst.entries, >> ERST_NUM_SEGS * sizeof(struct xhci_erst_entry)); >> >> - deq = (unsigned long)ctrl->event_ring->dequeue; >> + deq = virt_to_phys(ctrl->event_ring->dequeue); >> >> /* Update HC event ring dequeue pointer */ >> xhci_writeq(&ctrl->ir_set->erst_dequeue, >> @@ -585,7 +584,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, >> /* this is the event ring segment table pointer */ >> val_64 = xhci_readq(&ctrl->ir_set->erst_base); >> val_64 &= ERST_PTR_MASK; >> - val_64 |= ((uintptr_t)(ctrl->erst.entries) & ~ERST_PTR_MASK); >> + val_64 |= virt_to_phys(ctrl->erst.entries) & ~ERST_PTR_MASK; >> >> xhci_writeq(&ctrl->ir_set->erst_base, val_64); >> >> @@ -853,7 +852,7 @@ void xhci_setup_addressable_virt_dev(struct xhci_ctrl *ctrl, >> cpu_to_le32(((0 & MAX_BURST_MASK) << MAX_BURST_SHIFT) | >> ((3 & ERROR_COUNT_MASK) << ERROR_COUNT_SHIFT)); >> >> - trb_64 = (uintptr_t)virt_dev->eps[0].ring->first_seg->trbs; >> + trb_64 = virt_to_phys(virt_dev->eps[0].ring->first_seg->trbs); >> ep0_ctx->deq = cpu_to_le64(trb_64 | virt_dev->eps[0].ring->cycle_state); >> >> /* >> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c >> index 86aeaab412..092ed6eaf1 100644 >> --- a/drivers/usb/host/xhci-ring.c >> +++ b/drivers/usb/host/xhci-ring.c >> @@ -275,7 +275,7 @@ void xhci_queue_command(struct xhci_ctrl *ctrl, u8 *ptr, u32 slot_id, >> u32 ep_index, trb_type cmd) >> { >> u32 fields[4]; >> - u64 val_64 = (uintptr_t)ptr; >> + u64 val_64 = virt_to_phys(ptr); >> >> BUG_ON(prepare_ring(ctrl, ctrl->cmd_ring, EP_STATE_RUNNING)); >> >> @@ -399,7 +399,7 @@ void xhci_acknowledge_event(struct xhci_ctrl *ctrl) >> >> /* Inform the hardware */ >> xhci_writeq(&ctrl->ir_set->erst_dequeue, >> - (uintptr_t)ctrl->event_ring->dequeue | ERST_EHB); >> + virt_to_phys(ctrl->event_ring->dequeue) | ERST_EHB); >> } >> >> /** >> @@ -577,7 +577,7 @@ int xhci_bulk_tx(struct usb_device *udev, unsigned long pipe, >> u64 addr; >> int ret; >> u32 trb_fields[4]; >> - u64 val_64 = (uintptr_t)buffer; >> + u64 val_64 = virt_to_phys(buffer); >> >> debug("dev=%p, pipe=%lx, buffer=%p, length=%d\n", >> udev, pipe, buffer, length); >> @@ -876,7 +876,7 @@ int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe, >> if (length > 0) { >> if (req->requesttype & USB_DIR_IN) >> field |= TRB_DIR_IN; >> - buf_64 = (uintptr_t)buffer; >> + buf_64 = virt_to_phys(buffer); >> >> trb_fields[0] = lower_32_bits(buf_64); >> trb_fields[1] = upper_32_bits(buf_64); >> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c >> index ebd2954571..f89e274b0d 100644 >> --- a/drivers/usb/host/xhci.c >> +++ b/drivers/usb/host/xhci.c >> @@ -600,8 +600,7 @@ static int xhci_set_configuration(struct usb_device *udev) >> cpu_to_le32(MAX_BURST(max_burst) | >> ERROR_COUNT(err_count)); >> >> - trb_64 = (uintptr_t) >> - virt_dev->eps[ep_index].ring->enqueue; >> + trb_64 = virt_to_phys(virt_dev->eps[ep_index].ring->enqueue); >> ep_ctx[ep_index]->deq = cpu_to_le64(trb_64 | >> virt_dev->eps[ep_index].ring->cycle_state); >> >> -- > > Other than above, > Reviewed-by: Bin Meng <bmeng.cn@gmail.com> > > Regards, > Bin > Thanks, Stefan
Hi Stefan, On Fri, Jul 17, 2020 at 6:17 PM Stefan Roese <sr@denx.de> wrote: > > Hi Bin, > > On 17.07.20 07:57, Bin Meng wrote: > > Hi Stefan, > > > > On Thu, Jul 2, 2020 at 4:47 PM Stefan Roese <sr@denx.de> wrote: > >> > >> Some platforms, like MIPS Octeon, use mapped addresses (virtual address > >> != physical address). On these platforms we need to make sure, that the > >> local virtual addresses are converted to physical (DMA) addresses for > >> the xHCI controller. This patch adds the missing virt_to_phys() calls, > >> so that the correct addresses are used. > >> > >> Signed-off-by: Stefan Roese <sr@denx.de> > >> Cc: Bin Meng <bmeng.cn@gmail.com> > >> Cc: Marek Vasut <marex@denx.de> > >> > >> --- > >> > >> drivers/usb/host/xhci-mem.c | 19 +++++++++---------- > >> drivers/usb/host/xhci-ring.c | 8 ++++---- > >> drivers/usb/host/xhci.c | 3 +-- > >> 3 files changed, 14 insertions(+), 16 deletions(-) > >> > >> diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c > >> index 3b805ecb9e..874caf4761 100644 > >> --- a/drivers/usb/host/xhci-mem.c > >> +++ b/drivers/usb/host/xhci-mem.c > >> @@ -224,7 +224,7 @@ static void xhci_link_segments(struct xhci_segment *prev, > >> return; > >> prev->next = next; > >> if (link_trbs) { > >> - val_64 = (uintptr_t)next->trbs; > >> + val_64 = virt_to_phys(next->trbs); > >> prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = > >> cpu_to_le64(val_64); > >> > >> @@ -484,7 +484,7 @@ int xhci_alloc_virt_device(struct xhci_ctrl *ctrl, unsigned int slot_id) > >> /* Allocate endpoint 0 ring */ > >> virt_dev->eps[0].ring = xhci_ring_alloc(1, true); > >> > >> - byte_64 = (uintptr_t)(virt_dev->out_ctx->bytes); > >> + byte_64 = virt_to_phys(virt_dev->out_ctx->bytes); > >> > >> /* Point to output device context in dcbaa. */ > >> ctrl->dcbaa->dev_context_ptrs[slot_id] = cpu_to_le64(byte_64); > >> @@ -509,7 +509,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, > >> uint64_t val_64; > >> uint64_t trb_64; > >> uint32_t val; > >> - unsigned long deq; > >> + uint64_t deq; > > > > This change seems unnecessary? > > In most (all other?) places, the variable containing these 64 bit > addresses has the type uint64_t in this driver. So I wanted to make the > code more consistant here. Or do you see a problem with this change? No, just wondering if you see something is wrong with (unsigned long) on a 32-bit platform. Regards, Bin
Hi Bin, On 17.07.20 12:23, Bin Meng wrote: > Hi Stefan, > > On Fri, Jul 17, 2020 at 6:17 PM Stefan Roese <sr@denx.de> wrote: >> >> Hi Bin, >> >> On 17.07.20 07:57, Bin Meng wrote: >>> Hi Stefan, >>> >>> On Thu, Jul 2, 2020 at 4:47 PM Stefan Roese <sr@denx.de> wrote: >>>> >>>> Some platforms, like MIPS Octeon, use mapped addresses (virtual address >>>> != physical address). On these platforms we need to make sure, that the >>>> local virtual addresses are converted to physical (DMA) addresses for >>>> the xHCI controller. This patch adds the missing virt_to_phys() calls, >>>> so that the correct addresses are used. >>>> >>>> Signed-off-by: Stefan Roese <sr@denx.de> >>>> Cc: Bin Meng <bmeng.cn@gmail.com> >>>> Cc: Marek Vasut <marex@denx.de> >>>> >>>> --- >>>> >>>> drivers/usb/host/xhci-mem.c | 19 +++++++++---------- >>>> drivers/usb/host/xhci-ring.c | 8 ++++---- >>>> drivers/usb/host/xhci.c | 3 +-- >>>> 3 files changed, 14 insertions(+), 16 deletions(-) >>>> >>>> diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c >>>> index 3b805ecb9e..874caf4761 100644 >>>> --- a/drivers/usb/host/xhci-mem.c >>>> +++ b/drivers/usb/host/xhci-mem.c >>>> @@ -224,7 +224,7 @@ static void xhci_link_segments(struct xhci_segment *prev, >>>> return; >>>> prev->next = next; >>>> if (link_trbs) { >>>> - val_64 = (uintptr_t)next->trbs; >>>> + val_64 = virt_to_phys(next->trbs); >>>> prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = >>>> cpu_to_le64(val_64); >>>> >>>> @@ -484,7 +484,7 @@ int xhci_alloc_virt_device(struct xhci_ctrl *ctrl, unsigned int slot_id) >>>> /* Allocate endpoint 0 ring */ >>>> virt_dev->eps[0].ring = xhci_ring_alloc(1, true); >>>> >>>> - byte_64 = (uintptr_t)(virt_dev->out_ctx->bytes); >>>> + byte_64 = virt_to_phys(virt_dev->out_ctx->bytes); >>>> >>>> /* Point to output device context in dcbaa. */ >>>> ctrl->dcbaa->dev_context_ptrs[slot_id] = cpu_to_le64(byte_64); >>>> @@ -509,7 +509,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, >>>> uint64_t val_64; >>>> uint64_t trb_64; >>>> uint32_t val; >>>> - unsigned long deq; >>>> + uint64_t deq; >>> >>> This change seems unnecessary? >> >> In most (all other?) places, the variable containing these 64 bit >> addresses has the type uint64_t in this driver. So I wanted to make the >> code more consistant here. Or do you see a problem with this change? > > No, just wondering if you see something is wrong with (unsigned long) > on a 32-bit platform. I see. Thanks for checking. Do you have a (little-endian) platform that you could use to test this patchset on? I currently do not have such a board on my desk and would very much like to see it tested on little-endian systems before being applied. Thanks, Stefan
Hi Stefan, On Fri, Jul 17, 2020 at 6:28 PM Stefan Roese <sr@denx.de> wrote: > > Hi Bin, > > On 17.07.20 12:23, Bin Meng wrote: > > Hi Stefan, > > > > On Fri, Jul 17, 2020 at 6:17 PM Stefan Roese <sr@denx.de> wrote: > >> > >> Hi Bin, > >> > >> On 17.07.20 07:57, Bin Meng wrote: > >>> Hi Stefan, > >>> > >>> On Thu, Jul 2, 2020 at 4:47 PM Stefan Roese <sr@denx.de> wrote: > >>>> > >>>> Some platforms, like MIPS Octeon, use mapped addresses (virtual address > >>>> != physical address). On these platforms we need to make sure, that the > >>>> local virtual addresses are converted to physical (DMA) addresses for > >>>> the xHCI controller. This patch adds the missing virt_to_phys() calls, > >>>> so that the correct addresses are used. > >>>> > >>>> Signed-off-by: Stefan Roese <sr@denx.de> > >>>> Cc: Bin Meng <bmeng.cn@gmail.com> > >>>> Cc: Marek Vasut <marex@denx.de> > >>>> > >>>> --- > >>>> > >>>> drivers/usb/host/xhci-mem.c | 19 +++++++++---------- > >>>> drivers/usb/host/xhci-ring.c | 8 ++++---- > >>>> drivers/usb/host/xhci.c | 3 +-- > >>>> 3 files changed, 14 insertions(+), 16 deletions(-) > >>>> > >>>> diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c > >>>> index 3b805ecb9e..874caf4761 100644 > >>>> --- a/drivers/usb/host/xhci-mem.c > >>>> +++ b/drivers/usb/host/xhci-mem.c > >>>> @@ -224,7 +224,7 @@ static void xhci_link_segments(struct xhci_segment *prev, > >>>> return; > >>>> prev->next = next; > >>>> if (link_trbs) { > >>>> - val_64 = (uintptr_t)next->trbs; > >>>> + val_64 = virt_to_phys(next->trbs); > >>>> prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = > >>>> cpu_to_le64(val_64); > >>>> > >>>> @@ -484,7 +484,7 @@ int xhci_alloc_virt_device(struct xhci_ctrl *ctrl, unsigned int slot_id) > >>>> /* Allocate endpoint 0 ring */ > >>>> virt_dev->eps[0].ring = xhci_ring_alloc(1, true); > >>>> > >>>> - byte_64 = (uintptr_t)(virt_dev->out_ctx->bytes); > >>>> + byte_64 = virt_to_phys(virt_dev->out_ctx->bytes); > >>>> > >>>> /* Point to output device context in dcbaa. */ > >>>> ctrl->dcbaa->dev_context_ptrs[slot_id] = cpu_to_le64(byte_64); > >>>> @@ -509,7 +509,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, > >>>> uint64_t val_64; > >>>> uint64_t trb_64; > >>>> uint32_t val; > >>>> - unsigned long deq; > >>>> + uint64_t deq; > >>> > >>> This change seems unnecessary? > >> > >> In most (all other?) places, the variable containing these 64 bit > >> addresses has the type uint64_t in this driver. So I wanted to make the > >> code more consistant here. Or do you see a problem with this change? > > > > No, just wondering if you see something is wrong with (unsigned long) > > on a 32-bit platform. > > I see. Thanks for checking. > > Do you have a (little-endian) platform that you could use to test this > patchset on? I currently do not have such a board on my desk and would > very much like to see it tested on little-endian systems before being > applied. Yes, I can test this series on x86 Minnowmax. Will send results then. Regards, Bin
Hi Bin, On 17.07.20 12:29, Bin Meng wrote: > Hi Stefan, > > On Fri, Jul 17, 2020 at 6:28 PM Stefan Roese <sr@denx.de> wrote: >> >> Hi Bin, >> >> On 17.07.20 12:23, Bin Meng wrote: >>> Hi Stefan, >>> >>> On Fri, Jul 17, 2020 at 6:17 PM Stefan Roese <sr@denx.de> wrote: >>>> >>>> Hi Bin, >>>> >>>> On 17.07.20 07:57, Bin Meng wrote: >>>>> Hi Stefan, >>>>> >>>>> On Thu, Jul 2, 2020 at 4:47 PM Stefan Roese <sr@denx.de> wrote: >>>>>> >>>>>> Some platforms, like MIPS Octeon, use mapped addresses (virtual address >>>>>> != physical address). On these platforms we need to make sure, that the >>>>>> local virtual addresses are converted to physical (DMA) addresses for >>>>>> the xHCI controller. This patch adds the missing virt_to_phys() calls, >>>>>> so that the correct addresses are used. >>>>>> >>>>>> Signed-off-by: Stefan Roese <sr@denx.de> >>>>>> Cc: Bin Meng <bmeng.cn@gmail.com> >>>>>> Cc: Marek Vasut <marex@denx.de> >>>>>> >>>>>> --- >>>>>> >>>>>> drivers/usb/host/xhci-mem.c | 19 +++++++++---------- >>>>>> drivers/usb/host/xhci-ring.c | 8 ++++---- >>>>>> drivers/usb/host/xhci.c | 3 +-- >>>>>> 3 files changed, 14 insertions(+), 16 deletions(-) >>>>>> >>>>>> diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c >>>>>> index 3b805ecb9e..874caf4761 100644 >>>>>> --- a/drivers/usb/host/xhci-mem.c >>>>>> +++ b/drivers/usb/host/xhci-mem.c >>>>>> @@ -224,7 +224,7 @@ static void xhci_link_segments(struct xhci_segment *prev, >>>>>> return; >>>>>> prev->next = next; >>>>>> if (link_trbs) { >>>>>> - val_64 = (uintptr_t)next->trbs; >>>>>> + val_64 = virt_to_phys(next->trbs); >>>>>> prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = >>>>>> cpu_to_le64(val_64); >>>>>> >>>>>> @@ -484,7 +484,7 @@ int xhci_alloc_virt_device(struct xhci_ctrl *ctrl, unsigned int slot_id) >>>>>> /* Allocate endpoint 0 ring */ >>>>>> virt_dev->eps[0].ring = xhci_ring_alloc(1, true); >>>>>> >>>>>> - byte_64 = (uintptr_t)(virt_dev->out_ctx->bytes); >>>>>> + byte_64 = virt_to_phys(virt_dev->out_ctx->bytes); >>>>>> >>>>>> /* Point to output device context in dcbaa. */ >>>>>> ctrl->dcbaa->dev_context_ptrs[slot_id] = cpu_to_le64(byte_64); >>>>>> @@ -509,7 +509,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, >>>>>> uint64_t val_64; >>>>>> uint64_t trb_64; >>>>>> uint32_t val; >>>>>> - unsigned long deq; >>>>>> + uint64_t deq; >>>>> >>>>> This change seems unnecessary? >>>> >>>> In most (all other?) places, the variable containing these 64 bit >>>> addresses has the type uint64_t in this driver. So I wanted to make the >>>> code more consistant here. Or do you see a problem with this change? >>> >>> No, just wondering if you see something is wrong with (unsigned long) >>> on a 32-bit platform. >> >> I see. Thanks for checking. >> >> Do you have a (little-endian) platform that you could use to test this >> patchset on? I currently do not have such a board on my desk and would >> very much like to see it tested on little-endian systems before being >> applied. > > Yes, I can test this series on x86 Minnowmax. Will send results then. Thanks a lot. Thanks, Stefan
On Thu, Jul 2, 2020 at 4:47 PM Stefan Roese <sr@denx.de> wrote: > > Some platforms, like MIPS Octeon, use mapped addresses (virtual address > != physical address). On these platforms we need to make sure, that the > local virtual addresses are converted to physical (DMA) addresses for > the xHCI controller. This patch adds the missing virt_to_phys() calls, > so that the correct addresses are used. > > Signed-off-by: Stefan Roese <sr@denx.de> > Cc: Bin Meng <bmeng.cn@gmail.com> > Cc: Marek Vasut <marex@denx.de> > > --- > > drivers/usb/host/xhci-mem.c | 19 +++++++++---------- > drivers/usb/host/xhci-ring.c | 8 ++++---- > drivers/usb/host/xhci.c | 3 +-- > 3 files changed, 14 insertions(+), 16 deletions(-) > Tested-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 3b805ecb9e..874caf4761 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -224,7 +224,7 @@ static void xhci_link_segments(struct xhci_segment *prev, return; prev->next = next; if (link_trbs) { - val_64 = (uintptr_t)next->trbs; + val_64 = virt_to_phys(next->trbs); prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = cpu_to_le64(val_64); @@ -484,7 +484,7 @@ int xhci_alloc_virt_device(struct xhci_ctrl *ctrl, unsigned int slot_id) /* Allocate endpoint 0 ring */ virt_dev->eps[0].ring = xhci_ring_alloc(1, true); - byte_64 = (uintptr_t)(virt_dev->out_ctx->bytes); + byte_64 = virt_to_phys(virt_dev->out_ctx->bytes); /* Point to output device context in dcbaa. */ ctrl->dcbaa->dev_context_ptrs[slot_id] = cpu_to_le64(byte_64); @@ -509,7 +509,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, uint64_t val_64; uint64_t trb_64; uint32_t val; - unsigned long deq; + uint64_t deq; int i; struct xhci_segment *seg; @@ -521,7 +521,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, return -ENOMEM; } - val_64 = (uintptr_t)ctrl->dcbaa; + val_64 = virt_to_phys(ctrl->dcbaa); /* Set the pointer in DCBAA register */ xhci_writeq(&hcor->or_dcbaap, val_64); @@ -529,7 +529,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, ctrl->cmd_ring = xhci_ring_alloc(1, true); /* Set the address in the Command Ring Control register */ - trb_64 = (uintptr_t)ctrl->cmd_ring->first_seg->trbs; + trb_64 = virt_to_phys(ctrl->cmd_ring->first_seg->trbs); val_64 = xhci_readq(&hcor->or_crcr); val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) | (trb_64 & (u64) ~CMD_RING_RSVD_BITS) | @@ -559,8 +559,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, for (val = 0, seg = ctrl->event_ring->first_seg; val < ERST_NUM_SEGS; val++) { - trb_64 = 0; - trb_64 = (uintptr_t)seg->trbs; + trb_64 = virt_to_phys(seg->trbs); struct xhci_erst_entry *entry = &ctrl->erst.entries[val]; entry->seg_addr = cpu_to_le64(trb_64); entry->seg_size = cpu_to_le32(TRBS_PER_SEGMENT); @@ -570,7 +569,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, xhci_flush_cache((uintptr_t)ctrl->erst.entries, ERST_NUM_SEGS * sizeof(struct xhci_erst_entry)); - deq = (unsigned long)ctrl->event_ring->dequeue; + deq = virt_to_phys(ctrl->event_ring->dequeue); /* Update HC event ring dequeue pointer */ xhci_writeq(&ctrl->ir_set->erst_dequeue, @@ -585,7 +584,7 @@ int xhci_mem_init(struct xhci_ctrl *ctrl, struct xhci_hccr *hccr, /* this is the event ring segment table pointer */ val_64 = xhci_readq(&ctrl->ir_set->erst_base); val_64 &= ERST_PTR_MASK; - val_64 |= ((uintptr_t)(ctrl->erst.entries) & ~ERST_PTR_MASK); + val_64 |= virt_to_phys(ctrl->erst.entries) & ~ERST_PTR_MASK; xhci_writeq(&ctrl->ir_set->erst_base, val_64); @@ -853,7 +852,7 @@ void xhci_setup_addressable_virt_dev(struct xhci_ctrl *ctrl, cpu_to_le32(((0 & MAX_BURST_MASK) << MAX_BURST_SHIFT) | ((3 & ERROR_COUNT_MASK) << ERROR_COUNT_SHIFT)); - trb_64 = (uintptr_t)virt_dev->eps[0].ring->first_seg->trbs; + trb_64 = virt_to_phys(virt_dev->eps[0].ring->first_seg->trbs); ep0_ctx->deq = cpu_to_le64(trb_64 | virt_dev->eps[0].ring->cycle_state); /* diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 86aeaab412..092ed6eaf1 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -275,7 +275,7 @@ void xhci_queue_command(struct xhci_ctrl *ctrl, u8 *ptr, u32 slot_id, u32 ep_index, trb_type cmd) { u32 fields[4]; - u64 val_64 = (uintptr_t)ptr; + u64 val_64 = virt_to_phys(ptr); BUG_ON(prepare_ring(ctrl, ctrl->cmd_ring, EP_STATE_RUNNING)); @@ -399,7 +399,7 @@ void xhci_acknowledge_event(struct xhci_ctrl *ctrl) /* Inform the hardware */ xhci_writeq(&ctrl->ir_set->erst_dequeue, - (uintptr_t)ctrl->event_ring->dequeue | ERST_EHB); + virt_to_phys(ctrl->event_ring->dequeue) | ERST_EHB); } /** @@ -577,7 +577,7 @@ int xhci_bulk_tx(struct usb_device *udev, unsigned long pipe, u64 addr; int ret; u32 trb_fields[4]; - u64 val_64 = (uintptr_t)buffer; + u64 val_64 = virt_to_phys(buffer); debug("dev=%p, pipe=%lx, buffer=%p, length=%d\n", udev, pipe, buffer, length); @@ -876,7 +876,7 @@ int xhci_ctrl_tx(struct usb_device *udev, unsigned long pipe, if (length > 0) { if (req->requesttype & USB_DIR_IN) field |= TRB_DIR_IN; - buf_64 = (uintptr_t)buffer; + buf_64 = virt_to_phys(buffer); trb_fields[0] = lower_32_bits(buf_64); trb_fields[1] = upper_32_bits(buf_64); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index ebd2954571..f89e274b0d 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -600,8 +600,7 @@ static int xhci_set_configuration(struct usb_device *udev) cpu_to_le32(MAX_BURST(max_burst) | ERROR_COUNT(err_count)); - trb_64 = (uintptr_t) - virt_dev->eps[ep_index].ring->enqueue; + trb_64 = virt_to_phys(virt_dev->eps[ep_index].ring->enqueue); ep_ctx[ep_index]->deq = cpu_to_le64(trb_64 | virt_dev->eps[ep_index].ring->cycle_state);
Some platforms, like MIPS Octeon, use mapped addresses (virtual address != physical address). On these platforms we need to make sure, that the local virtual addresses are converted to physical (DMA) addresses for the xHCI controller. This patch adds the missing virt_to_phys() calls, so that the correct addresses are used. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> --- drivers/usb/host/xhci-mem.c | 19 +++++++++---------- drivers/usb/host/xhci-ring.c | 8 ++++---- drivers/usb/host/xhci.c | 3 +-- 3 files changed, 14 insertions(+), 16 deletions(-)