| Message ID | 20200713144930.1034632-21-lee.jones@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | [01/25] pinctrl: actions: pinctrl-owl: Supply missing 'struct owl_pinctrl' attribute descriptions | expand |
Hi Lee, On Mon, Jul 13, 2020 at 03:49:25PM +0100, Lee Jones wrote: > Some description blocks are void of any description/documentation, > others are missing 'struct' identifiers, there are also a couple of > misspellings of function parameter names. Fix all of them. > > Fixes the following W=1 kernel build warning(s): > > drivers/pinctrl/pinctrl-rza1.c:81: warning: cannot understand function prototype: 'struct rza1_bidir_pin ' > drivers/pinctrl/pinctrl-rza1.c:90: warning: cannot understand function prototype: 'struct rza1_bidir_entry ' > drivers/pinctrl/pinctrl-rza1.c:98: warning: cannot understand function prototype: 'struct rza1_swio_pin ' > drivers/pinctrl/pinctrl-rza1.c:108: warning: cannot understand function prototype: 'struct rza1_swio_entry ' > drivers/pinctrl/pinctrl-rza1.c:116: warning: cannot understand function prototype: 'struct rza1_pinmux_conf ' > drivers/pinctrl/pinctrl-rza1.c:443: warning: cannot understand function prototype: 'struct rza1_mux_conf ' > drivers/pinctrl/pinctrl-rza1.c:462: warning: cannot understand function prototype: 'struct rza1_port ' > drivers/pinctrl/pinctrl-rza1.c:482: warning: cannot understand function prototype: 'struct rza1_pinctrl ' > drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'port' not described in 'rza1_pinmux_get_flags' > drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'pin' not described in 'rza1_pinmux_get_flags' > drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'func' not described in 'rza1_pinmux_get_flags' > drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'rza1_pctl' not described in 'rza1_pinmux_get_flags' > drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'port' not described in 'rza1_set_bit' > drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'reg' not described in 'rza1_set_bit' > drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'bit' not described in 'rza1_set_bit' > drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'set' not described in 'rza1_set_bit' > drivers/pinctrl/pinctrl-rza1.c:672: warning: Function parameter or member 'rza1_pctl' not described in 'rza1_pin_mux_single' > drivers/pinctrl/pinctrl-rza1.c:672: warning: Excess function parameter 'pinctrl' description in 'rza1_pin_mux_single' > > Cc: Geert Uytterhoeven <geert+renesas@glider.be> > Cc: Jacopo Mondi <jacopo+renesas@jmondi.org> > Cc: linux-renesas-soc@vger.kernel.org > Signed-off-by: Lee Jones <lee.jones@linaro.org> Thanks, at the time I had no real idea about the implications of documenting with kerneldoc :) Acked-by: Jacopo Mondi <jacopo@jmondi.org> Thanks j > --- > drivers/pinctrl/pinctrl-rza1.c | 24 ++++++++++++------------ > 1 file changed, 12 insertions(+), 12 deletions(-) > > diff --git a/drivers/pinctrl/pinctrl-rza1.c b/drivers/pinctrl/pinctrl-rza1.c > index 38a14bbced5f6..511f232ab7bc2 100644 > --- a/drivers/pinctrl/pinctrl-rza1.c > +++ b/drivers/pinctrl/pinctrl-rza1.c > @@ -75,7 +75,7 @@ > * RZ/A1 pinmux flags > */ > > -/** > +/* > * rza1_bidir_pin - describe a single pin that needs bidir flag applied. > */ > struct rza1_bidir_pin { > @@ -83,7 +83,7 @@ struct rza1_bidir_pin { > u8 func: 4; > }; > > -/** > +/* > * rza1_bidir_entry - describe a list of pins that needs bidir flag applied. > * Each struct rza1_bidir_entry describes a port. > */ > @@ -92,7 +92,7 @@ struct rza1_bidir_entry { > const struct rza1_bidir_pin *pins; > }; > > -/** > +/* > * rza1_swio_pin - describe a single pin that needs swio flag applied. > */ > struct rza1_swio_pin { > @@ -102,7 +102,7 @@ struct rza1_swio_pin { > u16 input: 1; > }; > > -/** > +/* > * rza1_swio_entry - describe a list of pins that needs swio flag applied > */ > struct rza1_swio_entry { > @@ -110,7 +110,7 @@ struct rza1_swio_entry { > const struct rza1_swio_pin *pins; > }; > > -/** > +/* > * rza1_pinmux_conf - group together bidir and swio pinmux flag tables > */ > struct rza1_pinmux_conf { > @@ -431,7 +431,7 @@ static const struct rza1_pinmux_conf rza1l_pmx_conf = { > * RZ/A1 types > */ > /** > - * rza1_mux_conf - describes a pin multiplexing operation > + * struct rza1_mux_conf - describes a pin multiplexing operation > * > * @id: the pin identifier from 0 to RZA1_NPINS > * @port: the port where pin sits on > @@ -450,7 +450,7 @@ struct rza1_mux_conf { > }; > > /** > - * rza1_port - describes a pin port > + * struct rza1_port - describes a pin port > * > * This is mostly useful to lock register writes per-bank and not globally. > * > @@ -467,12 +467,12 @@ struct rza1_port { > }; > > /** > - * rza1_pinctrl - RZ pincontroller device > + * struct rza1_pinctrl - RZ pincontroller device > * > * @dev: parent device structure > * @mutex: protect [pinctrl|pinmux]_generic functions > * @base: logical address base > - * @nports: number of pin controller ports > + * @nport: number of pin controller ports > * @ports: pin controller banks > * @pins: pin array for pinctrl core > * @desc: pincontroller desc for pinctrl core > @@ -536,7 +536,7 @@ static inline int rza1_pinmux_get_swio(unsigned int port, > return -ENOENT; > } > > -/** > +/* > * rza1_pinmux_get_flags() - return pinmux flags associated to a pin > */ > static unsigned int rza1_pinmux_get_flags(unsigned int port, unsigned int pin, > @@ -566,7 +566,7 @@ static unsigned int rza1_pinmux_get_flags(unsigned int port, unsigned int pin, > * RZ/A1 SoC operations > */ > > -/** > +/* > * rza1_set_bit() - un-locked set/clear a single bit in pin configuration > * registers > */ > @@ -664,7 +664,7 @@ static inline int rza1_pin_get(struct rza1_port *port, unsigned int pin) > /** > * rza1_pin_mux_single() - configure pin multiplexing on a single pin > * > - * @pinctrl: RZ/A1 pin controller device > + * @rza1_pctl: RZ/A1 pin controller device > * @mux_conf: pin multiplexing descriptor > */ > static int rza1_pin_mux_single(struct rza1_pinctrl *rza1_pctl, > -- > 2.25.1 >
On Tue, 14 Jul 2020, Jacopo Mondi wrote: > Hi Lee, > > On Mon, Jul 13, 2020 at 03:49:25PM +0100, Lee Jones wrote: > > Some description blocks are void of any description/documentation, > > others are missing 'struct' identifiers, there are also a couple of > > misspellings of function parameter names. Fix all of them. > > > > Fixes the following W=1 kernel build warning(s): > > > > drivers/pinctrl/pinctrl-rza1.c:81: warning: cannot understand function prototype: 'struct rza1_bidir_pin ' > > drivers/pinctrl/pinctrl-rza1.c:90: warning: cannot understand function prototype: 'struct rza1_bidir_entry ' > > drivers/pinctrl/pinctrl-rza1.c:98: warning: cannot understand function prototype: 'struct rza1_swio_pin ' > > drivers/pinctrl/pinctrl-rza1.c:108: warning: cannot understand function prototype: 'struct rza1_swio_entry ' > > drivers/pinctrl/pinctrl-rza1.c:116: warning: cannot understand function prototype: 'struct rza1_pinmux_conf ' > > drivers/pinctrl/pinctrl-rza1.c:443: warning: cannot understand function prototype: 'struct rza1_mux_conf ' > > drivers/pinctrl/pinctrl-rza1.c:462: warning: cannot understand function prototype: 'struct rza1_port ' > > drivers/pinctrl/pinctrl-rza1.c:482: warning: cannot understand function prototype: 'struct rza1_pinctrl ' > > drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'port' not described in 'rza1_pinmux_get_flags' > > drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'pin' not described in 'rza1_pinmux_get_flags' > > drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'func' not described in 'rza1_pinmux_get_flags' > > drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'rza1_pctl' not described in 'rza1_pinmux_get_flags' > > drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'port' not described in 'rza1_set_bit' > > drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'reg' not described in 'rza1_set_bit' > > drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'bit' not described in 'rza1_set_bit' > > drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'set' not described in 'rza1_set_bit' > > drivers/pinctrl/pinctrl-rza1.c:672: warning: Function parameter or member 'rza1_pctl' not described in 'rza1_pin_mux_single' > > drivers/pinctrl/pinctrl-rza1.c:672: warning: Excess function parameter 'pinctrl' description in 'rza1_pin_mux_single' > > > > Cc: Geert Uytterhoeven <geert+renesas@glider.be> > > Cc: Jacopo Mondi <jacopo+renesas@jmondi.org> > > Cc: linux-renesas-soc@vger.kernel.org > > Signed-off-by: Lee Jones <lee.jones@linaro.org> > > Thanks, at the time I had no real idea about the implications of > documenting with kerneldoc :) You and 1000 others! :D Don't lose any sleep over it. > Acked-by: Jacopo Mondi <jacopo@jmondi.org> Thanks.
Hi Lee, On Mon, Jul 13, 2020 at 4:49 PM Lee Jones <lee.jones@linaro.org> wrote: > Some description blocks are void of any description/documentation, > others are missing 'struct' identifiers, there are also a couple of > misspellings of function parameter names. Fix all of them. > > Fixes the following W=1 kernel build warning(s): > > drivers/pinctrl/pinctrl-rza1.c:81: warning: cannot understand function prototype: 'struct rza1_bidir_pin ' > drivers/pinctrl/pinctrl-rza1.c:90: warning: cannot understand function prototype: 'struct rza1_bidir_entry ' > drivers/pinctrl/pinctrl-rza1.c:98: warning: cannot understand function prototype: 'struct rza1_swio_pin ' > drivers/pinctrl/pinctrl-rza1.c:108: warning: cannot understand function prototype: 'struct rza1_swio_entry ' > drivers/pinctrl/pinctrl-rza1.c:116: warning: cannot understand function prototype: 'struct rza1_pinmux_conf ' > drivers/pinctrl/pinctrl-rza1.c:443: warning: cannot understand function prototype: 'struct rza1_mux_conf ' > drivers/pinctrl/pinctrl-rza1.c:462: warning: cannot understand function prototype: 'struct rza1_port ' > drivers/pinctrl/pinctrl-rza1.c:482: warning: cannot understand function prototype: 'struct rza1_pinctrl ' > drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'port' not described in 'rza1_pinmux_get_flags' > drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'pin' not described in 'rza1_pinmux_get_flags' > drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'func' not described in 'rza1_pinmux_get_flags' > drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'rza1_pctl' not described in 'rza1_pinmux_get_flags' > drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'port' not described in 'rza1_set_bit' > drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'reg' not described in 'rza1_set_bit' > drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'bit' not described in 'rza1_set_bit' > drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'set' not described in 'rza1_set_bit' > drivers/pinctrl/pinctrl-rza1.c:672: warning: Function parameter or member 'rza1_pctl' not described in 'rza1_pin_mux_single' > drivers/pinctrl/pinctrl-rza1.c:672: warning: Excess function parameter 'pinctrl' description in 'rza1_pin_mux_single' > > Cc: Geert Uytterhoeven <geert+renesas@glider.be> > Cc: Jacopo Mondi <jacopo+renesas@jmondi.org> > Cc: linux-renesas-soc@vger.kernel.org > Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> i.e. will queue in sh-pfc-for-v5.9. Gr{oetje,eeting}s, Geert
On Wed, Jul 15, 2020 at 9:30 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > i.e. will queue in sh-pfc-for-v5.9. OK since Geert is queueing this I'll drop this patch from my tree. Yours, Linus Walleij
Hi Linus, On Thu, Jul 16, 2020 at 3:57 PM Linus Walleij <linus.walleij@linaro.org> wrote: > On Wed, Jul 15, 2020 at 9:30 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > > i.e. will queue in sh-pfc-for-v5.9. > > OK since Geert is queueing this I'll drop this patch from my tree. Oops, sorry, I didn't know you were planning to apply this one. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
diff --git a/drivers/pinctrl/pinctrl-rza1.c b/drivers/pinctrl/pinctrl-rza1.c index 38a14bbced5f6..511f232ab7bc2 100644 --- a/drivers/pinctrl/pinctrl-rza1.c +++ b/drivers/pinctrl/pinctrl-rza1.c @@ -75,7 +75,7 @@ * RZ/A1 pinmux flags */ -/** +/* * rza1_bidir_pin - describe a single pin that needs bidir flag applied. */ struct rza1_bidir_pin { @@ -83,7 +83,7 @@ struct rza1_bidir_pin { u8 func: 4; }; -/** +/* * rza1_bidir_entry - describe a list of pins that needs bidir flag applied. * Each struct rza1_bidir_entry describes a port. */ @@ -92,7 +92,7 @@ struct rza1_bidir_entry { const struct rza1_bidir_pin *pins; }; -/** +/* * rza1_swio_pin - describe a single pin that needs swio flag applied. */ struct rza1_swio_pin { @@ -102,7 +102,7 @@ struct rza1_swio_pin { u16 input: 1; }; -/** +/* * rza1_swio_entry - describe a list of pins that needs swio flag applied */ struct rza1_swio_entry { @@ -110,7 +110,7 @@ struct rza1_swio_entry { const struct rza1_swio_pin *pins; }; -/** +/* * rza1_pinmux_conf - group together bidir and swio pinmux flag tables */ struct rza1_pinmux_conf { @@ -431,7 +431,7 @@ static const struct rza1_pinmux_conf rza1l_pmx_conf = { * RZ/A1 types */ /** - * rza1_mux_conf - describes a pin multiplexing operation + * struct rza1_mux_conf - describes a pin multiplexing operation * * @id: the pin identifier from 0 to RZA1_NPINS * @port: the port where pin sits on @@ -450,7 +450,7 @@ struct rza1_mux_conf { }; /** - * rza1_port - describes a pin port + * struct rza1_port - describes a pin port * * This is mostly useful to lock register writes per-bank and not globally. * @@ -467,12 +467,12 @@ struct rza1_port { }; /** - * rza1_pinctrl - RZ pincontroller device + * struct rza1_pinctrl - RZ pincontroller device * * @dev: parent device structure * @mutex: protect [pinctrl|pinmux]_generic functions * @base: logical address base - * @nports: number of pin controller ports + * @nport: number of pin controller ports * @ports: pin controller banks * @pins: pin array for pinctrl core * @desc: pincontroller desc for pinctrl core @@ -536,7 +536,7 @@ static inline int rza1_pinmux_get_swio(unsigned int port, return -ENOENT; } -/** +/* * rza1_pinmux_get_flags() - return pinmux flags associated to a pin */ static unsigned int rza1_pinmux_get_flags(unsigned int port, unsigned int pin, @@ -566,7 +566,7 @@ static unsigned int rza1_pinmux_get_flags(unsigned int port, unsigned int pin, * RZ/A1 SoC operations */ -/** +/* * rza1_set_bit() - un-locked set/clear a single bit in pin configuration * registers */ @@ -664,7 +664,7 @@ static inline int rza1_pin_get(struct rza1_port *port, unsigned int pin) /** * rza1_pin_mux_single() - configure pin multiplexing on a single pin * - * @pinctrl: RZ/A1 pin controller device + * @rza1_pctl: RZ/A1 pin controller device * @mux_conf: pin multiplexing descriptor */ static int rza1_pin_mux_single(struct rza1_pinctrl *rza1_pctl,
Some description blocks are void of any description/documentation, others are missing 'struct' identifiers, there are also a couple of misspellings of function parameter names. Fix all of them. Fixes the following W=1 kernel build warning(s): drivers/pinctrl/pinctrl-rza1.c:81: warning: cannot understand function prototype: 'struct rza1_bidir_pin ' drivers/pinctrl/pinctrl-rza1.c:90: warning: cannot understand function prototype: 'struct rza1_bidir_entry ' drivers/pinctrl/pinctrl-rza1.c:98: warning: cannot understand function prototype: 'struct rza1_swio_pin ' drivers/pinctrl/pinctrl-rza1.c:108: warning: cannot understand function prototype: 'struct rza1_swio_entry ' drivers/pinctrl/pinctrl-rza1.c:116: warning: cannot understand function prototype: 'struct rza1_pinmux_conf ' drivers/pinctrl/pinctrl-rza1.c:443: warning: cannot understand function prototype: 'struct rza1_mux_conf ' drivers/pinctrl/pinctrl-rza1.c:462: warning: cannot understand function prototype: 'struct rza1_port ' drivers/pinctrl/pinctrl-rza1.c:482: warning: cannot understand function prototype: 'struct rza1_pinctrl ' drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'port' not described in 'rza1_pinmux_get_flags' drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'pin' not described in 'rza1_pinmux_get_flags' drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'func' not described in 'rza1_pinmux_get_flags' drivers/pinctrl/pinctrl-rza1.c:546: warning: Function parameter or member 'rza1_pctl' not described in 'rza1_pinmux_get_flags' drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'port' not described in 'rza1_set_bit' drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'reg' not described in 'rza1_set_bit' drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'bit' not described in 'rza1_set_bit' drivers/pinctrl/pinctrl-rza1.c:575: warning: Function parameter or member 'set' not described in 'rza1_set_bit' drivers/pinctrl/pinctrl-rza1.c:672: warning: Function parameter or member 'rza1_pctl' not described in 'rza1_pin_mux_single' drivers/pinctrl/pinctrl-rza1.c:672: warning: Excess function parameter 'pinctrl' description in 'rza1_pin_mux_single' Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Jacopo Mondi <jacopo+renesas@jmondi.org> Cc: linux-renesas-soc@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> --- drivers/pinctrl/pinctrl-rza1.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)