| Message ID | 20200701165857.39930-1-Zhiqiang.Hou@nxp.com |
|---|---|
| Headers | show |
| Series | powerpc: covert p1010, p1020 and p2020 RDB board to DM_ETH | expand |
Hi Zhiqiang, On Wed, 1 Jul 2020 at 20:05, Zhiqiang Hou <Zhiqiang.Hou@nxp.com> wrote: > > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> > > This patch set depends on: > https://patchwork.ozlabs.org/project/uboot/patch/20200503185227.28731-2-olteanv@gmail.com/ > > Hou Zhiqiang (16): > net: fsl_mdio: Change to use virtual address > net: fsl_mdio: Correct the MII management register block address > net: tsec: convert to use DM_MDIO when DM_ETH enabled > net: tsec: Add fixed-link PHY support > net: tsec: Add the compatible string "gianfar" support > powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled > fsl: p1_p2_rdb: Move vsc7835 firmware uploading to > board_early_init_r() > configs: p1_p2_rdb: Add the default address of vsc7385 firmware > dts: powerpc: p1020rdb: Add eTSEC DT nodes > powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled > configs: P1020RDB: Enable DM_ETH config > dts: powerpc: p1010rdb: Add eTSEC DT nodes > powerpc: p1010rdb: Compile legacy ethernet init function when no > DM_ETH > configs: P1010RDB: Enable DM_ETH config > dts: powerpc: p2020rdb: Add eTSEC DT nodes > configs: P2020RDB: Enable DM_ETH config > > arch/powerpc/cpu/mpc8xxx/cpu.c | 2 + > arch/powerpc/dts/p1010rdb-pa.dts | 1 + > arch/powerpc/dts/p1010rdb-pa_36b.dts | 1 + > arch/powerpc/dts/p1010rdb.dtsi | 50 +++++++++++++++ > arch/powerpc/dts/p1010si-post.dtsi | 25 ++++++++ > arch/powerpc/dts/p1020-post.dtsi | 20 +++++- > arch/powerpc/dts/p1020rdb-pc.dts | 1 + > arch/powerpc/dts/p1020rdb-pc.dtsi | 55 ++++++++++++++++ > arch/powerpc/dts/p1020rdb-pc_36b.dts | 1 + > arch/powerpc/dts/p1020rdb-pd.dts | 45 ++++++++++++++ > arch/powerpc/dts/p2020-post.dtsi | 10 ++- > arch/powerpc/dts/p2020rdb-pc.dts | 1 + > arch/powerpc/dts/p2020rdb-pc.dtsi | 50 +++++++++++++++ > arch/powerpc/dts/p2020rdb-pc_36b.dts | 1 + > arch/powerpc/dts/pq3-etsec1-0.dtsi | 28 +++++++++ > arch/powerpc/dts/pq3-etsec1-1.dtsi | 28 +++++++++ > arch/powerpc/dts/pq3-etsec1-2.dtsi | 28 +++++++++ > arch/powerpc/dts/pq3-etsec1-3.dtsi | 28 +++++++++ > arch/powerpc/dts/pq3-etsec2-0.dtsi | 35 +++++++++++ > arch/powerpc/dts/pq3-etsec2-1.dtsi | 35 +++++++++++ > arch/powerpc/dts/pq3-etsec2-2.dtsi | 35 +++++++++++ > arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi | 16 +++++ > arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi | 16 +++++ > arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi | 16 +++++ > board/freescale/p1010rdb/p1010rdb.c | 2 + > board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 37 ++++++----- > configs/P1010RDB-PA_36BIT_NAND_defconfig | 2 + > configs/P1010RDB-PA_36BIT_NOR_defconfig | 2 + > configs/P1010RDB-PA_36BIT_SDCARD_defconfig | 2 + > configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig | 2 + > configs/P1010RDB-PA_NAND_defconfig | 2 + > configs/P1010RDB-PA_NOR_defconfig | 2 + > configs/P1010RDB-PA_SDCARD_defconfig | 2 + > configs/P1010RDB-PA_SPIFLASH_defconfig | 2 + > configs/P1010RDB-PB_36BIT_NAND_defconfig | 2 + > configs/P1010RDB-PB_36BIT_NOR_defconfig | 2 + > configs/P1010RDB-PB_36BIT_SDCARD_defconfig | 2 + > configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig | 2 + > configs/P1010RDB-PB_NAND_defconfig | 2 + > configs/P1010RDB-PB_NOR_defconfig | 2 + > configs/P1010RDB-PB_SDCARD_defconfig | 2 + > configs/P1010RDB-PB_SPIFLASH_defconfig | 2 + > configs/P1020RDB-PC_36BIT_NAND_defconfig | 3 + > configs/P1020RDB-PC_36BIT_SDCARD_defconfig | 3 + > configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 3 + > configs/P1020RDB-PC_36BIT_defconfig | 3 + > configs/P1020RDB-PC_NAND_defconfig | 3 + > configs/P1020RDB-PC_SDCARD_defconfig | 3 + > configs/P1020RDB-PC_SPIFLASH_defconfig | 3 + > configs/P1020RDB-PC_defconfig | 3 + > configs/P1020RDB-PD_NAND_defconfig | 3 + > configs/P1020RDB-PD_SDCARD_defconfig | 3 + > configs/P1020RDB-PD_SPIFLASH_defconfig | 3 + > configs/P1020RDB-PD_defconfig | 3 + > configs/P2020RDB-PC_36BIT_NAND_defconfig | 3 + > configs/P2020RDB-PC_36BIT_SDCARD_defconfig | 3 + > configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 3 + > configs/P2020RDB-PC_36BIT_defconfig | 3 + > configs/P2020RDB-PC_NAND_defconfig | 3 + > configs/P2020RDB-PC_SDCARD_defconfig | 3 + > configs/P2020RDB-PC_SPIFLASH_defconfig | 3 + > configs/P2020RDB-PC_defconfig | 3 + > doc/device-tree-bindings/net/fsl-tsec-phy.txt | 2 +- > drivers/net/fsl_mdio.c | 28 +++++++-- > drivers/net/tsec.c | 62 ++++++++----------- > include/configs/p1_p2_rdb_pc.h | 2 + > include/fsl_mdio.h | 4 ++ > include/tsec.h | 4 ++ > 68 files changed, 698 insertions(+), 63 deletions(-) > create mode 100644 arch/powerpc/dts/p1020rdb-pc.dtsi > create mode 100644 arch/powerpc/dts/p2020rdb-pc.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec1-0.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec1-1.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec1-2.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec1-3.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec2-0.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec2-1.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec2-2.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi > create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi > > -- > 2.25.1 > The point with the Acked-by/Reviewed-by/Tested-by tags is that you copy them to your next patch submissions, such that the maintainers see which patches have had eyes on them already, so that they don't need to look through them again. Thanks, -Vladimir
On Wed, 1 Jul 2020 at 20:11, Vladimir Oltean <olteanv@gmail.com> wrote: > > Hi Zhiqiang, > > On Wed, 1 Jul 2020 at 20:05, Zhiqiang Hou <Zhiqiang.Hou@nxp.com> wrote: > > > > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> > > > > This patch set depends on: > > https://patchwork.ozlabs.org/project/uboot/patch/20200503185227.28731-2-olteanv@gmail.com/ > > > > Hou Zhiqiang (16): > > net: fsl_mdio: Change to use virtual address > > net: fsl_mdio: Correct the MII management register block address > > net: tsec: convert to use DM_MDIO when DM_ETH enabled > > net: tsec: Add fixed-link PHY support > > net: tsec: Add the compatible string "gianfar" support > > powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled > > fsl: p1_p2_rdb: Move vsc7835 firmware uploading to > > board_early_init_r() > > configs: p1_p2_rdb: Add the default address of vsc7385 firmware > > dts: powerpc: p1020rdb: Add eTSEC DT nodes > > powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled > > configs: P1020RDB: Enable DM_ETH config > > dts: powerpc: p1010rdb: Add eTSEC DT nodes > > powerpc: p1010rdb: Compile legacy ethernet init function when no > > DM_ETH > > configs: P1010RDB: Enable DM_ETH config > > dts: powerpc: p2020rdb: Add eTSEC DT nodes > > configs: P2020RDB: Enable DM_ETH config > > > > arch/powerpc/cpu/mpc8xxx/cpu.c | 2 + > > arch/powerpc/dts/p1010rdb-pa.dts | 1 + > > arch/powerpc/dts/p1010rdb-pa_36b.dts | 1 + > > arch/powerpc/dts/p1010rdb.dtsi | 50 +++++++++++++++ > > arch/powerpc/dts/p1010si-post.dtsi | 25 ++++++++ > > arch/powerpc/dts/p1020-post.dtsi | 20 +++++- > > arch/powerpc/dts/p1020rdb-pc.dts | 1 + > > arch/powerpc/dts/p1020rdb-pc.dtsi | 55 ++++++++++++++++ > > arch/powerpc/dts/p1020rdb-pc_36b.dts | 1 + > > arch/powerpc/dts/p1020rdb-pd.dts | 45 ++++++++++++++ > > arch/powerpc/dts/p2020-post.dtsi | 10 ++- > > arch/powerpc/dts/p2020rdb-pc.dts | 1 + > > arch/powerpc/dts/p2020rdb-pc.dtsi | 50 +++++++++++++++ > > arch/powerpc/dts/p2020rdb-pc_36b.dts | 1 + > > arch/powerpc/dts/pq3-etsec1-0.dtsi | 28 +++++++++ > > arch/powerpc/dts/pq3-etsec1-1.dtsi | 28 +++++++++ > > arch/powerpc/dts/pq3-etsec1-2.dtsi | 28 +++++++++ > > arch/powerpc/dts/pq3-etsec1-3.dtsi | 28 +++++++++ > > arch/powerpc/dts/pq3-etsec2-0.dtsi | 35 +++++++++++ > > arch/powerpc/dts/pq3-etsec2-1.dtsi | 35 +++++++++++ > > arch/powerpc/dts/pq3-etsec2-2.dtsi | 35 +++++++++++ > > arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi | 16 +++++ > > arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi | 16 +++++ > > arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi | 16 +++++ > > board/freescale/p1010rdb/p1010rdb.c | 2 + > > board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 37 ++++++----- > > configs/P1010RDB-PA_36BIT_NAND_defconfig | 2 + > > configs/P1010RDB-PA_36BIT_NOR_defconfig | 2 + > > configs/P1010RDB-PA_36BIT_SDCARD_defconfig | 2 + > > configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig | 2 + > > configs/P1010RDB-PA_NAND_defconfig | 2 + > > configs/P1010RDB-PA_NOR_defconfig | 2 + > > configs/P1010RDB-PA_SDCARD_defconfig | 2 + > > configs/P1010RDB-PA_SPIFLASH_defconfig | 2 + > > configs/P1010RDB-PB_36BIT_NAND_defconfig | 2 + > > configs/P1010RDB-PB_36BIT_NOR_defconfig | 2 + > > configs/P1010RDB-PB_36BIT_SDCARD_defconfig | 2 + > > configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig | 2 + > > configs/P1010RDB-PB_NAND_defconfig | 2 + > > configs/P1010RDB-PB_NOR_defconfig | 2 + > > configs/P1010RDB-PB_SDCARD_defconfig | 2 + > > configs/P1010RDB-PB_SPIFLASH_defconfig | 2 + > > configs/P1020RDB-PC_36BIT_NAND_defconfig | 3 + > > configs/P1020RDB-PC_36BIT_SDCARD_defconfig | 3 + > > configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 3 + > > configs/P1020RDB-PC_36BIT_defconfig | 3 + > > configs/P1020RDB-PC_NAND_defconfig | 3 + > > configs/P1020RDB-PC_SDCARD_defconfig | 3 + > > configs/P1020RDB-PC_SPIFLASH_defconfig | 3 + > > configs/P1020RDB-PC_defconfig | 3 + > > configs/P1020RDB-PD_NAND_defconfig | 3 + > > configs/P1020RDB-PD_SDCARD_defconfig | 3 + > > configs/P1020RDB-PD_SPIFLASH_defconfig | 3 + > > configs/P1020RDB-PD_defconfig | 3 + > > configs/P2020RDB-PC_36BIT_NAND_defconfig | 3 + > > configs/P2020RDB-PC_36BIT_SDCARD_defconfig | 3 + > > configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 3 + > > configs/P2020RDB-PC_36BIT_defconfig | 3 + > > configs/P2020RDB-PC_NAND_defconfig | 3 + > > configs/P2020RDB-PC_SDCARD_defconfig | 3 + > > configs/P2020RDB-PC_SPIFLASH_defconfig | 3 + > > configs/P2020RDB-PC_defconfig | 3 + > > doc/device-tree-bindings/net/fsl-tsec-phy.txt | 2 +- > > drivers/net/fsl_mdio.c | 28 +++++++-- > > drivers/net/tsec.c | 62 ++++++++----------- > > include/configs/p1_p2_rdb_pc.h | 2 + > > include/fsl_mdio.h | 4 ++ > > include/tsec.h | 4 ++ > > 68 files changed, 698 insertions(+), 63 deletions(-) > > create mode 100644 arch/powerpc/dts/p1020rdb-pc.dtsi > > create mode 100644 arch/powerpc/dts/p2020rdb-pc.dtsi > > create mode 100644 arch/powerpc/dts/pq3-etsec1-0.dtsi > > create mode 100644 arch/powerpc/dts/pq3-etsec1-1.dtsi > > create mode 100644 arch/powerpc/dts/pq3-etsec1-2.dtsi > > create mode 100644 arch/powerpc/dts/pq3-etsec1-3.dtsi > > create mode 100644 arch/powerpc/dts/pq3-etsec2-0.dtsi > > create mode 100644 arch/powerpc/dts/pq3-etsec2-1.dtsi > > create mode 100644 arch/powerpc/dts/pq3-etsec2-2.dtsi > > create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi > > create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi > > create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi > > > > -- > > 2.25.1 > > > > The point with the Acked-by/Reviewed-by/Tested-by tags is that you > copy them to your next patch submissions, such that the maintainers > see which patches have had eyes on them already, so that they don't > need to look through them again. > > Thanks, > -Vladimir I'm sorry, please ignore this. I thought none of the patches have the Reviewed-by tag I added, but looks like those are in fact all the patches that I did review. Time to review the rest! Thanks, -Vladimir
Hi Vladimir, Thanks a lot for your comments! > -----Original Message----- > From: Vladimir Oltean [mailto:olteanv@gmail.com] > Sent: 2020年7月2日 1:46 > To: Z.q. Hou <zhiqiang.hou@nxp.com> > Cc: u-boot <u-boot@lists.denx.de>; Bin Meng <bmeng.cn@gmail.com>; > Priyanka Jain <priyanka.jain@nxp.com> > Subject: Re: [PATCHv4 00/16] powerpc: covert p1010, p1020 and p2020 RDB > board to DM_ETH > > On Wed, 1 Jul 2020 at 20:11, Vladimir Oltean <olteanv@gmail.com> wrote: > > > > Hi Zhiqiang, > > > > On Wed, 1 Jul 2020 at 20:05, Zhiqiang Hou <Zhiqiang.Hou@nxp.com> wrote: > > > > > > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> > > > > > > This patch set depends on: > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpa > > > > tchwork.ozlabs.org%2Fproject%2Fuboot%2Fpatch%2F20200503185227.2873 > 1- > > > > 2-olteanv%40gmail.com%2F&data=02%7C01%7CZhiqiang.Hou%40nxp.c > om%7 > > > > C9215a1fed74348210eb108d81de69d85%7C686ea1d3bc2b4c6fa92cd99c5c3 > 01635 > > > %7C0%7C0%7C637292223605570364&sdata=s1fe6AFATwaeeUAOU > gK7vMElVZNP > > > 3L%2F62pDsdcfOE%2BY%3D&reserved=0 > > > > > > Hou Zhiqiang (16): > > > net: fsl_mdio: Change to use virtual address > > > net: fsl_mdio: Correct the MII management register block address > > > net: tsec: convert to use DM_MDIO when DM_ETH enabled > > > net: tsec: Add fixed-link PHY support > > > net: tsec: Add the compatible string "gianfar" support > > > powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH > enabled > > > fsl: p1_p2_rdb: Move vsc7835 firmware uploading to > > > board_early_init_r() > > > configs: p1_p2_rdb: Add the default address of vsc7385 firmware > > > dts: powerpc: p1020rdb: Add eTSEC DT nodes > > > powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH > enabled > > > configs: P1020RDB: Enable DM_ETH config > > > dts: powerpc: p1010rdb: Add eTSEC DT nodes > > > powerpc: p1010rdb: Compile legacy ethernet init function when no > > > DM_ETH > > > configs: P1010RDB: Enable DM_ETH config > > > dts: powerpc: p2020rdb: Add eTSEC DT nodes > > > configs: P2020RDB: Enable DM_ETH config > > > > > > arch/powerpc/cpu/mpc8xxx/cpu.c | 2 + > > > arch/powerpc/dts/p1010rdb-pa.dts | 1 + > > > arch/powerpc/dts/p1010rdb-pa_36b.dts | 1 + > > > arch/powerpc/dts/p1010rdb.dtsi | 50 > +++++++++++++++ > > > arch/powerpc/dts/p1010si-post.dtsi | 25 ++++++++ > > > arch/powerpc/dts/p1020-post.dtsi | 20 +++++- > > > arch/powerpc/dts/p1020rdb-pc.dts | 1 + > > > arch/powerpc/dts/p1020rdb-pc.dtsi | 55 > ++++++++++++++++ > > > arch/powerpc/dts/p1020rdb-pc_36b.dts | 1 + > > > arch/powerpc/dts/p1020rdb-pd.dts | 45 > ++++++++++++++ > > > arch/powerpc/dts/p2020-post.dtsi | 10 ++- > > > arch/powerpc/dts/p2020rdb-pc.dts | 1 + > > > arch/powerpc/dts/p2020rdb-pc.dtsi | 50 > +++++++++++++++ > > > arch/powerpc/dts/p2020rdb-pc_36b.dts | 1 + > > > arch/powerpc/dts/pq3-etsec1-0.dtsi | 28 +++++++++ > > > arch/powerpc/dts/pq3-etsec1-1.dtsi | 28 +++++++++ > > > arch/powerpc/dts/pq3-etsec1-2.dtsi | 28 +++++++++ > > > arch/powerpc/dts/pq3-etsec1-3.dtsi | 28 +++++++++ > > > arch/powerpc/dts/pq3-etsec2-0.dtsi | 35 +++++++++++ > > > arch/powerpc/dts/pq3-etsec2-1.dtsi | 35 +++++++++++ > > > arch/powerpc/dts/pq3-etsec2-2.dtsi | 35 +++++++++++ > > > arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi | 16 +++++ > > > arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi | 16 +++++ > > > arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi | 16 +++++ > > > board/freescale/p1010rdb/p1010rdb.c | 2 + > > > board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 37 ++++++----- > > > configs/P1010RDB-PA_36BIT_NAND_defconfig | 2 + > > > configs/P1010RDB-PA_36BIT_NOR_defconfig | 2 + > > > configs/P1010RDB-PA_36BIT_SDCARD_defconfig | 2 + > > > configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig | 2 + > > > configs/P1010RDB-PA_NAND_defconfig | 2 + > > > configs/P1010RDB-PA_NOR_defconfig | 2 + > > > configs/P1010RDB-PA_SDCARD_defconfig | 2 + > > > configs/P1010RDB-PA_SPIFLASH_defconfig | 2 + > > > configs/P1010RDB-PB_36BIT_NAND_defconfig | 2 + > > > configs/P1010RDB-PB_36BIT_NOR_defconfig | 2 + > > > configs/P1010RDB-PB_36BIT_SDCARD_defconfig | 2 + > > > configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig | 2 + > > > configs/P1010RDB-PB_NAND_defconfig | 2 + > > > configs/P1010RDB-PB_NOR_defconfig | 2 + > > > configs/P1010RDB-PB_SDCARD_defconfig | 2 + > > > configs/P1010RDB-PB_SPIFLASH_defconfig | 2 + > > > configs/P1020RDB-PC_36BIT_NAND_defconfig | 3 + > > > configs/P1020RDB-PC_36BIT_SDCARD_defconfig | 3 + > > > configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 3 + > > > configs/P1020RDB-PC_36BIT_defconfig | 3 + > > > configs/P1020RDB-PC_NAND_defconfig | 3 + > > > configs/P1020RDB-PC_SDCARD_defconfig | 3 + > > > configs/P1020RDB-PC_SPIFLASH_defconfig | 3 + > > > configs/P1020RDB-PC_defconfig | 3 + > > > configs/P1020RDB-PD_NAND_defconfig | 3 + > > > configs/P1020RDB-PD_SDCARD_defconfig | 3 + > > > configs/P1020RDB-PD_SPIFLASH_defconfig | 3 + > > > configs/P1020RDB-PD_defconfig | 3 + > > > configs/P2020RDB-PC_36BIT_NAND_defconfig | 3 + > > > configs/P2020RDB-PC_36BIT_SDCARD_defconfig | 3 + > > > configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 3 + > > > configs/P2020RDB-PC_36BIT_defconfig | 3 + > > > configs/P2020RDB-PC_NAND_defconfig | 3 + > > > configs/P2020RDB-PC_SDCARD_defconfig | 3 + > > > configs/P2020RDB-PC_SPIFLASH_defconfig | 3 + > > > configs/P2020RDB-PC_defconfig | 3 + > > > doc/device-tree-bindings/net/fsl-tsec-phy.txt | 2 +- > > > drivers/net/fsl_mdio.c | 28 +++++++-- > > > drivers/net/tsec.c | 62 > ++++++++----------- > > > include/configs/p1_p2_rdb_pc.h | 2 + > > > include/fsl_mdio.h | 4 ++ > > > include/tsec.h | 4 ++ > > > 68 files changed, 698 insertions(+), 63 deletions(-) create mode > > > 100644 arch/powerpc/dts/p1020rdb-pc.dtsi create mode 100644 > > > arch/powerpc/dts/p2020rdb-pc.dtsi create mode 100644 > > > arch/powerpc/dts/pq3-etsec1-0.dtsi > > > create mode 100644 arch/powerpc/dts/pq3-etsec1-1.dtsi > > > create mode 100644 arch/powerpc/dts/pq3-etsec1-2.dtsi > > > create mode 100644 arch/powerpc/dts/pq3-etsec1-3.dtsi > > > create mode 100644 arch/powerpc/dts/pq3-etsec2-0.dtsi > > > create mode 100644 arch/powerpc/dts/pq3-etsec2-1.dtsi > > > create mode 100644 arch/powerpc/dts/pq3-etsec2-2.dtsi > > > create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi > > > create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi > > > create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi > > > > > > -- > > > 2.25.1 > > > > > > > The point with the Acked-by/Reviewed-by/Tested-by tags is that you > > copy them to your next patch submissions, such that the maintainers > > see which patches have had eyes on them already, so that they don't > > need to look through them again. > > > > Thanks, > > -Vladimir > > I'm sorry, please ignore this. I thought none of the patches have the > Reviewed-by tag I added, but looks like those are in fact all the patches that I > did review. Time to review the rest! That's all right, and thanks again! Regards, Zhiqiang > > Thanks, > -Vladimir
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> This patch set depends on: https://patchwork.ozlabs.org/project/uboot/patch/20200503185227.28731-2-olteanv@gmail.com/ Hou Zhiqiang (16): net: fsl_mdio: Change to use virtual address net: fsl_mdio: Correct the MII management register block address net: tsec: convert to use DM_MDIO when DM_ETH enabled net: tsec: Add fixed-link PHY support net: tsec: Add the compatible string "gianfar" support powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r() configs: p1_p2_rdb: Add the default address of vsc7385 firmware dts: powerpc: p1020rdb: Add eTSEC DT nodes powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled configs: P1020RDB: Enable DM_ETH config dts: powerpc: p1010rdb: Add eTSEC DT nodes powerpc: p1010rdb: Compile legacy ethernet init function when no DM_ETH configs: P1010RDB: Enable DM_ETH config dts: powerpc: p2020rdb: Add eTSEC DT nodes configs: P2020RDB: Enable DM_ETH config arch/powerpc/cpu/mpc8xxx/cpu.c | 2 + arch/powerpc/dts/p1010rdb-pa.dts | 1 + arch/powerpc/dts/p1010rdb-pa_36b.dts | 1 + arch/powerpc/dts/p1010rdb.dtsi | 50 +++++++++++++++ arch/powerpc/dts/p1010si-post.dtsi | 25 ++++++++ arch/powerpc/dts/p1020-post.dtsi | 20 +++++- arch/powerpc/dts/p1020rdb-pc.dts | 1 + arch/powerpc/dts/p1020rdb-pc.dtsi | 55 ++++++++++++++++ arch/powerpc/dts/p1020rdb-pc_36b.dts | 1 + arch/powerpc/dts/p1020rdb-pd.dts | 45 ++++++++++++++ arch/powerpc/dts/p2020-post.dtsi | 10 ++- arch/powerpc/dts/p2020rdb-pc.dts | 1 + arch/powerpc/dts/p2020rdb-pc.dtsi | 50 +++++++++++++++ arch/powerpc/dts/p2020rdb-pc_36b.dts | 1 + arch/powerpc/dts/pq3-etsec1-0.dtsi | 28 +++++++++ arch/powerpc/dts/pq3-etsec1-1.dtsi | 28 +++++++++ arch/powerpc/dts/pq3-etsec1-2.dtsi | 28 +++++++++ arch/powerpc/dts/pq3-etsec1-3.dtsi | 28 +++++++++ arch/powerpc/dts/pq3-etsec2-0.dtsi | 35 +++++++++++ arch/powerpc/dts/pq3-etsec2-1.dtsi | 35 +++++++++++ arch/powerpc/dts/pq3-etsec2-2.dtsi | 35 +++++++++++ arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi | 16 +++++ arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi | 16 +++++ arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi | 16 +++++ board/freescale/p1010rdb/p1010rdb.c | 2 + board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 37 ++++++----- configs/P1010RDB-PA_36BIT_NAND_defconfig | 2 + configs/P1010RDB-PA_36BIT_NOR_defconfig | 2 + configs/P1010RDB-PA_36BIT_SDCARD_defconfig | 2 + configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig | 2 + configs/P1010RDB-PA_NAND_defconfig | 2 + configs/P1010RDB-PA_NOR_defconfig | 2 + configs/P1010RDB-PA_SDCARD_defconfig | 2 + configs/P1010RDB-PA_SPIFLASH_defconfig | 2 + configs/P1010RDB-PB_36BIT_NAND_defconfig | 2 + configs/P1010RDB-PB_36BIT_NOR_defconfig | 2 + configs/P1010RDB-PB_36BIT_SDCARD_defconfig | 2 + configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig | 2 + configs/P1010RDB-PB_NAND_defconfig | 2 + configs/P1010RDB-PB_NOR_defconfig | 2 + configs/P1010RDB-PB_SDCARD_defconfig | 2 + configs/P1010RDB-PB_SPIFLASH_defconfig | 2 + configs/P1020RDB-PC_36BIT_NAND_defconfig | 3 + configs/P1020RDB-PC_36BIT_SDCARD_defconfig | 3 + configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 3 + configs/P1020RDB-PC_36BIT_defconfig | 3 + configs/P1020RDB-PC_NAND_defconfig | 3 + configs/P1020RDB-PC_SDCARD_defconfig | 3 + configs/P1020RDB-PC_SPIFLASH_defconfig | 3 + configs/P1020RDB-PC_defconfig | 3 + configs/P1020RDB-PD_NAND_defconfig | 3 + configs/P1020RDB-PD_SDCARD_defconfig | 3 + configs/P1020RDB-PD_SPIFLASH_defconfig | 3 + configs/P1020RDB-PD_defconfig | 3 + configs/P2020RDB-PC_36BIT_NAND_defconfig | 3 + configs/P2020RDB-PC_36BIT_SDCARD_defconfig | 3 + configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 3 + configs/P2020RDB-PC_36BIT_defconfig | 3 + configs/P2020RDB-PC_NAND_defconfig | 3 + configs/P2020RDB-PC_SDCARD_defconfig | 3 + configs/P2020RDB-PC_SPIFLASH_defconfig | 3 + configs/P2020RDB-PC_defconfig | 3 + doc/device-tree-bindings/net/fsl-tsec-phy.txt | 2 +- drivers/net/fsl_mdio.c | 28 +++++++-- drivers/net/tsec.c | 62 ++++++++----------- include/configs/p1_p2_rdb_pc.h | 2 + include/fsl_mdio.h | 4 ++ include/tsec.h | 4 ++ 68 files changed, 698 insertions(+), 63 deletions(-) create mode 100644 arch/powerpc/dts/p1020rdb-pc.dtsi create mode 100644 arch/powerpc/dts/p2020rdb-pc.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec1-0.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec1-1.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec1-2.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec1-3.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec2-0.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec2-1.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec2-2.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi